Tender For Nabard Ridf Xx Construction Of A Regulator Across Bharathapuzha At Koottakadavu In Anakkara Panchayath- Electrical Work, Anakkara Panchayath-Kerala

TDR : 21486667

Tender Notice
BOQ

Expired

Anakkara Panchayath , Kerala

Tender Brief : Tender For Nabard Ridf Xx Construction Of A Regulator Across Bharathapuzha At Koottakadavu In Anakkara Panchayath- Electrical Work

Document Fees
₹ 2760 /-

EMD
₹ 50000.0 /-

Tender Value
₹ 49.55 Lakhs /-

Submission Date
07-09-2019

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Work Name:NABARD RIDF XX Construction of a regulator across Bharathapuzha at Koottakadavu in Anakkara Panchayath-ELECTRICAL Works
1	1	Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/devices & complying to IS8623. (a) Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using 2.00 mm CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments should be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. including control wiring (MSB,SSBs,SBs)	BI01010001010000000000000515BI0100001114	50	One square metre
2	2	(b)Supply and providing the following size of SMC sheets in the panel as barriers & shrouding using required bolts and nuts including cutting to shape etc. as required.(b1) 2mm thick	BI01010001010000000000000515BI0100001115	0.6	One square metre
3	3	(b2) 4 mm thick	BI01010001010000000000000515BI0100001116	0.5	One square metre
4	4	(c )Supply and fixing the following types of beeding along the periphery of doors/other detachable compartments to make the panel assembly dust & vermin proof including sticking with glue- U' section rubber beeding suitable for 1.60/2.00 mm sheet	BI01010001010000000000000515BI0100001117	50	One metre
5	5	Fabrication, supply, conveyance, installation of base frame for floor mounting type panel board using channel of class designation ISMC 75 including cutting, welding, drilling holes, painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel and to the finished floor using required bolt and nuts, making good the damages etc. as required.	BI01010001010000000000000515BI0100001118	75	One metre
6	6	Fabrication, supply & fixing main bus bar system and interconnections with electrolytic grade copper strips/rigid conductors conforming to IS1867 (with latest amendments) for us bar arrangement with single strip per phase supported on finger type bus bar supports of adequate size, spacing between suports not exceeding 50 cm & overhang not exceeding 5 cm including bending to shape, drilling holes, inning the points of contacts, fixing heat shrinable PVC sleeves, plated bolts and nuts with plate washers and spring washers, copper sockets for round conductors, etc., as required.(MSB,SSBs,SB)	BI01010001010000000000000515BI0100001119	8000	One cubic centimetre
7	7	Fabrication, supply & fixing earth bus system with copper strip/conductor and connecting all accessories as per rule including tinning the points of contacts etc as required.	BI01010001010000000000000515BI0100001120	1950	One cubic centimetre
8	8	Fabrication, supply, conveyance and installation of angle iron frame work for wall mounting panel board using suitable size angle iron cut and welded to shape including painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel using required bolt and nuts, fixing the whole to the wall, making good the damages etc. as required.	BI01010001010000000000000515BI0100001121	500	One kilogram
9	9	Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.(MSB) (a)63 A, AC 23 A, TPN SDF for DIN fuse (Group B)	BI01010001010000000000000515BI0100001122	26	each
10	10	(b) 200A,AC 23,TPN SDF	BI01010001010000000000000515BI0100001123	4	each
11	11	S & F switch disconnector fuse unit complete with handle assembly, door inter lock and padlocking arrangement of the following ratings: (a)32 A, AC 23 A, TPN SDF for DIN fuse(plat form light control)	BI01010001010000000000000515BI0100001124	1	Each
12	12	Supply & fixing following HRC fuses in the existing SDF units (a) 32A, DIN type fuse link (Group B)	BI01010001010000000000000515BI0100001125	84	each
13	13	(b) 160A DIN type fuse link	BI01010001010000000000000515BI0100001126	12	each
14	14	(c ) 25A DIN fuse link	BI01010001010000000000000515BI0100001127	3	each
15	15	(d) 2 A, clip-on offset tag fuse link (Group B)	BI01010001010000000000000515BI0100001128	87	each
16	16	(e) 20A fuse holder fuses (Group B)	BI01010001010000000000000515BI0100001129	87	each
17	17	(f) 250 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC	BI01010001010000000000000515BI0100001130	3	each
18	18	(g) 250 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC (AS BUS COUPLER)	BI01010001010000000000000515BI0100001131	1	each
19	19	(h) 200A, 25/35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL	BI01010001010000000000000515BI0100001132	6	each
20	20	(i) . . Do ..rotary kit	BI01010001010000000000000515BI0100001133	9	each
21	21	(j) . . Do ..castel key inter lock kit	BI01010001010000000000000515BI0100001134	3	each
22	22	Supply and fixing the following accessories in the existing Panel board and giving connections etc..(a)Three phase DIGITAL volt meter (V - RY, YB, BR, R, Y, B) of accuracy class 0.5	BI01010001010000000000000515BI0100001135	6	each
23	23	(b) Three phase digital ammeter (A - R, Y, B) of accuracy class 0.50	BI01010001010000000000000515BI0100001136	2	each
24	24	(c )250/ 5 A, 5 VA, resin cast metering CT of accuracy class 0.5	BI01010001010000000000000515BI0100001137	6	each
25	25	(d) Aluminium anodised Danger Notice Board of size 150 x 100 mm with inscriptions (both in English and Malayalam) and conventional Skull and Bone in Red colour.	BI01010001010000000000000515BI0100001138	29	each
26	26	(e) LED indicators for all voltage ranges - Blue Colour	BI01010001010000000000000515BI0100001139	29	each
27	27	(f) LED indicators for all voltage ranges - Red, Green, Black, yellow or Orange Colour.(MSB&SSB)	BI01010001010000000000000515BI0100001140	58	each
28	28	S & F switch disconnector unit (isolator) complete with handle assembly, door inter lock and padlocking arrangement of the following ratings: 63A, TP/TPN AC 23 A duty	BI01010001010000000000000515BI0100001141	23	each
29	29	Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of folowing size suitable for fixing KSEB meter,fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.600x300x214mm	BI01010001010000000000000515BI0100001142	1	each
30	30	Supply and fixing the following accessories in the existing meter board and giving connections etc. (a) 63 A, 415 V, fuse base.	BI01010001010000000000000515BI0100001143	3	each
31	31	(b) 63 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.	BI01010001010000000000000515BI0100001144	1	each
32	32	Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/equipments. including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required _ 1.50 sq mm single run with required sockets.	BI01010001010000000000000515BI0100001145	175	One metre
33	33	CABLE LAYING Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. (a) 3.5c 70sqmm with factory made clamp	BI01010001010000000000000515BI0100001146	660	One metre
34	34	(b) 4 core 6 sq mm with factory made clamp(street light end portion &platform street light)	BI01010001010000000000000515BI0100001147	540	One metre
35	35	(c )4 core 10 sq mm with factory made clamp('street light starting portion')	BI01010001010000000000000515BI0100001148	325	One metre
36	36	(d) 3.5c 120sqmm With specially made clamp	BI01010001010000000000000515BI0100001149	60	One metre
37	37	Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required. (a) 3.5 core 120 sq mm	BI01010001010000000000000515BI0100001150	10	One metre
38	38	(b) 3.5 core 70 sq mm	BI01010001010000000000000515BI0100001151	210	One metre
39	39	(c )4 core 6 sq mm	BI01010001010000000000000515BI0100001152	50	One metre
40	40	(d) 4 core 10 sq mm	BI01010001010000000000000515BI0100001153	50	One metre
41	41	Supplying siemens / tropodur type nickel plated Double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of the following sizes as required. (a) 6 sq mm	BI01010001010000000000000515BI0100001154	74	Each
42	42	(b)10 sq mm	BI01010001010000000000000515BI0100001155	16	Each
43	43	(c )70 sq mm	BI01010001010000000000000515BI0100001156	8	Each
44	44	(d)120 sq mm	BI01010001010000000000000515BI0100001157	2	Each
45	45	Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required.(a)25 sqmm - 95sq mm with 20 mm wide x 1.20 mm thick clip	BI01010001010000000000000515BI0100001158	8	each
46	46	(b) 4sqmm-16 sq mm with 12 mm wide x 1 mm thick clip	BI01010001010000000000000515BI0100001159	90	each
47	47	Supplying and providing earth clamps made out of copper strips of the following sizes including cutting and bending the flat exactly to the shape of the gland, drilling necessary holes for nut & bolt, tinning the points of contacts and giving connections to the main earthing system as required. (a) 20 x 3 mm for earthing glands of size 120 sq mm to 185 sq mm	BI01010001010000000000000515BI0100001160	2	each
48	48	Supply of superior quality (dowells) Aluminium tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.(a) 6 sq mm	BI01010001010000000000000515BI0100001161	250	Each
49	49	(b)10 sq mm	BI01010001010000000000000515BI0100001162	120	Each
50	50	(c )35 sqmm	BI01010001010000000000000515BI0100001163	8	Each
51	51	(d) 70 sqmm	BI01010001010000000000000515BI0100001164	24	Each
52	52	Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in 0.75m below ground including excavation and refilling (a)120 / 102.50 mm or nearest size	BI01010001010000000000000515BI0100001165	55	One metre
53	53	(b) 63 / 50 mm or nearest size	BI01010001010000000000000515BI0100001166	55	One metre
54	54	Supplying , threading , laying and jointing of the following sizes of 'B' class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads.(a)75mm dia	BI01010001010000000000000515BI0100001167	6	One metre
55	55	(b)50 mm dia	BI01010001010000000000000515BI0100001168	6	One metre
56	56	Supply and clamping the following sizes of PVC pipe on wall with all required accessories including cutting and making good the walls, colour washing etc. as required as protective covering to cables. (a)90 mm dia PVC pipe (8 Kgf / cm2)	BI01010001010000000000000515BI0100001169	6	One metre
57	57	Supply and clamping the following sizes of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 x 3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1m, making good the damages, colour washing etc. as required (for horizontal run). (a)25 x 3 mm GI strip	BI01010001010000000000000515BI0100001170	320	One metre
58	58	(b) 25 x 3 mm copper strip tinned at the points of contacts	BI01010001010000000000000515BI0100001171	25	One metre
59	59	Supply and laying the following sizes of strips laid 0.60 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil). (a) 25 x 3 mm copper strip tinned at the points of contacts	BI01010001010000000000000515BI0100001172	60	One metre
60	60	Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. (a) 2.65 mm copper conductor (12 SWG)	BI01010001010000000000000515BI0100001173	30	One metre
61	61	(b)3.15 mm copper conductor (10 SWG)	BI01010001010000000000000515BI0100001174	10	One metre
62	62	(c )2.00mm(SWG)	BI01010001010000000000000515BI0100001175	30	One metre
63	63	(d) 3.15 mm GI conductor (10 SWG)	BI01010001010000000000000515BI0100001176	790	One metre
64	64	Supply of superior quality copper earth sockets suitable for bare copper conductors including crimping etc as required for the following sizes. (a) 2.65 mm	BI01010001010000000000000515BI0100001177	10	each
65	65	(b)3.15 mm	BI01010001010000000000000515BI0100001178	120	each
66	66	(c )2 sqmm	BI01010001010000000000000515BI0100001179	30	each
67	67	Supply and providing GI bolt and nut with washers on the MS box/earth bus etc as required including drilling holes of sizes 25 x 6 mm	BI01010001010000000000000515BI0100001180	50	each
68	68	Supply and providing Brass bolt and nut with washers on the MS box/earth bus etc as required including drilling holes of sizes 25 x 3 mm	BI01010001010000000000000515BI0100001181	120	each
69	69	12 x 3 mm brass bolt & nut	BI01010001010000000000000515BI0100001182	50	Each
70	70	Supply and providing plate earthing as per IS 3043 with 600 x 600 x 6.30 mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary soil)	BI01010001010000000000000515BI0100001183	5	each
71	71	Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection chamber of earth pit as required (a)300 x 300 x 6 mm cast iron gully trap with covering	BI01010001010000000000000515BI0100001184	5	Each
72	72	Supply and providing test joint for earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required. (a) 2 x 25 x 6 mm GI strip	BI01010001010000000000000515BI0100001185	2	One metre
73	73	Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/strips including cutting, drilling necessary holes (in case of strp) and fixing firmly with plate test joint etc as required. (a) 25 x 3 mm copper strip tinned at the points of contacts	BI01010001010000000000000515BI0100001186	20	One metre
74	74	Supply route marker with 102mmx102mm cast iron, spike 5mm thick with inscription 'LT Cable' there on bolted / welded to 35x35x6mm angle iron 60cm long and fixing the same in ground as required.	BI01010001010000000000000515BI0100001187	5	Each
75	75	Supply and errection of Bajaj or equivalent make lamp post galvanized octagenal shaped mounting height 6M on required concrete foundation detailed in the post manufacturing firms foundation drawing with foundation bolts,Anchor plates , GI nut bolt washers etc including cost of single arm fancy bracket (No.008)	BI01010001010000000000000515BI0100001188	14	Each
76	76	Supply, conveyance, installation, testing & commissoning of Philips make Green Line BRP 320 1X24 LED type Sreet light fitting complete with all accessories and Lamp on existing lamp post and giving connections as required. (IP 65)	BI01010001010000000000000515BI0100001189	14	Each
77	77	Supply, conveyance and erection of the following sizes of 'B' class GI pipe in single section for lamp post including bending the pipe etc as required for increasing the asthetic (excluding cost of brackets etc if required) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required - 50 mm dia	BI01010001010000000000000515BI0100001190	75	One metre
78	78	Supply, conveyance, installation, testing and commissioning of pre-wired STREET LIGHT LED 1X16 WATTS light fitting complete with all accessories and lamps etc. in the existing GI pipe and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.(19 Nos near shutter motor assembly and 2 Nos for control room)	BI01010001010000000000000515BI0100001191	30	each
79	79	Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / post using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required (for the installation of outdoor light fittings). (a) 32 mm dia with clamps made from 20 x 3 mm MS flat	BI01010001010000000000000515BI0100001192	30	One metre
80	80	Supply and fixing HENSEL/RITTAL make Out door cable termination boxes with knock outs for cable entry and size 200x168x98mm with heavy duty electrical grade brass connector( 4 way) for connecting incoming and out going cables including charges for fixing the box on post /concrete base/parapet of bridge using suitable size MS clamps, provision for mounting 1 no. 6A two pole MCB, providing MS sheet in the box for glanding the cables as required.	BI01010001010000000000000515BI0100001193	30	each
81	81	Supply and installation of 3 phase 4 way Double cover dust and vermin proof enclosure of Vertical MCB DB inclusive of copper/brass bus bar, Neutral link and DIN bar suitable for incorporating MCB, isolator etc. including providing blanking plates in the blanking slots and fixed in recess including cutting holes on the wall, making good the damages, colour washing etc. as required.	BI01010001010000000000000515BI0100001194	1	each
82	82	40 A, 4 pole, 2 way,centre off 400V AC MCB change over switch with centre OFF	BI01010001010000000000000515BI0100001195	1	each
83	83	Supply and fixing 6A to 32 A TP MCB (Triple Pole) - c series and giving connection.	BI01010001010000000000000515BI0100001196	3	each
84	84	40 A, 4 pole, 30 mA RCCB	BI01010001010000000000000515BI0100001197	1	each
85	85	6-32A( C curve)	BI01010001010000000000000515BI0100001198	3	each
86	86	Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (a) Single control light point with 6A, 3 plate ceiling rose	BI01010001010000000000000515BI0100001199	13	points
87	87	Supply and wiring point in the above system but without ceiling for batten light.	BI01010001010000000000000515BI0100001200	1	points
88	88	Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.	BI01010001010000000000000515BI0100001201	2	points
89	89	Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.	BI01010001010000000000000515BI0100001202	3	points
90	90	Supply, conveyance, installation, testing and commissioning of pre-wired light fitting made from 0.5mmCRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required. (a) 1x28wT5 fitting with lamp holder, APF electronic ballast suitable for continuous operation with THD <10%, power factor >0.98, RoHS compliant,high lumen tube .	BI01010001010000000000000515BI0100001203	5	each
91	91	Supply, conveyance, installation, testing and commissioning of pre-wired light fittings made of .5mm thick CRCA sheet accessories and lamps etc. including supplying and fixing ball and socket arrangements on PVC round block, suspension down rod of 19mm dia MS conduit up to 2x30cm length including painting and wiring the down rod with 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connections etc. as required. (a) 1x28wT5 fitting with APF electronic ballast suitable for continuous operation with THD <10%, power factor >0.98, RoHS compliant,high lumen tube .	BI01010001010000000000000515BI0100001204	4	each
92	92	Supply and fixing angle / straight brass lined skirt type, bakelite batten holder without shade and giving connection etc as required	BI01010001010000000000000515BI0100001205	1	each
93	93	Supply and fixing Aluminium polished shade 200 mm as required.	BI01010001010000000000000515BI0100001206	1	each
94	94	Supply and providing the following types and power rated lamps in the existing fittings as required Dwarf size 14W BC/ES/E14 RETROFIT CFL	BI01010001010000000000000515BI0100001207	2	Each
95	95	Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, epoxy powder coated, heat resistant prismatic glass cover suitable for 9 W CFL to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required.	BI01010001010000000000000515BI0100001208	2	Each
96	96	Supply and drawing 650/1100V grade PVC insulated stranded single core copper conductor cable size 3 x 1.5 sq mm conforming to IS 694/1990 through the existing conduit and giving necessary connections etc a required (to lamp from pillar box of lamp Post)	BI01010001010000000000000515BI0100001209	216	One metre
97	97	Supply and drawing 650/1100V grade PVC insulated stranded single core copper conductor cable size 2 x 2.5 sq mm conforming to IS 694/1990 through the existing conduit and giving necessary connections etc as required.	BI01010001010000000000000515BI0100001210	30	One metre
98	98	Supply and drawing 650/1100V grade PVC insulated stranded single core copper conductor cable size 2 x 4 sq mm conforming to IS 694/1990 through the existing conduit and giving necessary connections etc a required.	BI01010001010000000000000515BI0100001211	15	One metre
99	99	4.00 sq mm 3 run	BI01010001010000000000000515BI0100001212	190	One metre
100	100	4.00 sq mm 1 run	BI01010001010000000000000515BI0100001213	240	One metre
101	101	Supply, conveyance, installation, testing and commissioning of exhaust fan 305 mm sweep light duty in the existing opening including making the holes suit the size of the above fan, fixing necessary bolt and nuts making good the damages etc. as required including giving connection with required length of 24/0.20 mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS.	BI01010001010000000000000515BI0100001214	2	each
102	102	Charges for cutting holes suitable for accomodating exhaust fans of all sizes including plastering, making good the damages, colour washing etc. as required.	BI01010001010000000000000515BI0100001215	2	each
103	103	Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.	BI01010001010000000000000515BI0100001216	2	each
104	104	Supply, conveyance, installation, testing and commissioning of 1200 mm sweep ceiling fan of using standard accessories wiring the down rod with 16/0.20 mm PVC unsulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire etc. as required % (Star rated)	BI01010001010000000000000515BI0100001217	2	each
105	105	Supply and fixing 16A modular type switch on the existing modular box(Group B)	BI01010001010000000000000515BI0100001218	2	each
106	106	.. Do .. 15A universal plug socket ..do ..	BI01010001010000000000000515BI0100001219	2	each
107	107	.. Do ..3 module metal box in recess	BI01010001010000000000000515BI0100001220	2	each
108	108	.. Do ..3 module white/ off-white front plate	BI01010001010000000000000515BI0100001221	2	each
109	109	Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.(a) 20 mm dia medium gauge	BI01010001010000000000000515BI0100001222	30	One metre
110	110	(b) 25 mm dia medium gauge	BI01010001010000000000000515BI0100001223	50	One metre
111	111	Supplying and clamping the following sizes of corrugated PVC flexible conduit with necessary compression gland with locking ring and check nut at termination pointed using suitable size GI / painted MS saddles spacing not exceeding 60 cms on surface including making good the damages, colour washing etc. as required. (a) 20 mm dia	BI01010001010000000000000515BI0100001224	20	One metre
112	112	(b) 25 mm dia	BI01010001010000000000000515BI0100001225	60	One metre
113	113	Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required.	BI01010001010000000000000515BI0100001226	2	each
114	114	Supply & Providing 10 Litre Fire Buckets of the capacity on existing stand including spply and filling river sand	BI01010001010000000000000515BI0100001227	2	each
115	115	Supply and providing 2mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength.	BI01010001010000000000000515BI0100001228	4	One square metre
116	116	Printing letters of figures of size upto 2.5/4/5 cm height as identification marks.	BI01010001010000000000000515BI0100001229	2000	Each
117	117	Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.	BI01010001010000000000000515BI0100001230	1	Each
118	118	Supply and providing MS chequered plate of suitable thickness including cutting, welding, painting etc. as required for the cable trench covering.	BI01010001010000000000000515BI0100001231	1000	One kilogram
119	119	Supply and installation including all manner of supports, suspenders, anchor, bolts etc of cable trays made of suitable size channel section slotted angles/flats, MS plates etc. as required including painting with two coats of enamel paint over a coat of zinc cromate primer, making good the damages as required.	BI01010001010000000000000515BI0100001232	2650	One kilogram
120	120	Supplying and installation of supports, anchor bolts etc made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint	BI01010001010000000000000515BI0100001233	300	One kilogram
121	121	supply,installation and commissioning of forward reverse operating arrangement for the existing motor shutter assembly using 32A contactors ,1 No.40A 4 pole mcb isolator,overload relay,push button with elements etc as required excluding 4/6sq.mm pvc copper wire	BI01010001010000000000000515BI0100001234	22	each
122	122	Aluminium anodised semi oval type legend plate with inscription of ON/ OFF/ FORWARD/ REVERSE/ START/ STOP/ UP/ DOWN/ R PHASE/ Y PHASE/ B PHASE/ TRIP/ OPEN/ CLOSE/ LEFT/ RIGHT/ MOTOR ON/ MOTOR OFF/ ACCEPT/ RETRACT/ RESET/ EMERGENCY/ EMERGENCY ON/ EMERGENCY OFF/ PUMP RUNNING/ PUMP OFF/ EMERGENCY STOP/ SLOW/ FAST or other inscriptions directed.	BI01010001010000000000000515BI0100001235	50	Each
123	123	Supply and providing 10Amps Eluminax connector	BI01010001010000000000000515BI0100001236	100	Each
124	124	Supply and providing 4 Amps Eluminax connector	BI01010001010000000000000515BI0100001237	250	Each
125	125	Supply and providing 3 KVAr, 3 phase, 440 V, delta connected Metalised Poly Propylene Capacitor suitable for direct connection to motors.	BI01010001010000000000000515BI0100001238	22	Each
126	126	.. Do .. 25A 4 way electrical grade brass Heavy duty connectors (for street light)	BI01010001010000000000000515BI0100001239	14	Each
127	127	.. Do .. Timer control (0-24.00hrs)for street light	BI01010001010000000000000515BI0100001240	1	Each
128	128	.. Do ..6A MCB 2Pole(for each street light lamp)	BI01010001010000000000000515BI0100001241	44	Each
129	129	.. Do .. 25A Contactor (for street light control)	BI01010001010000000000000515BI0100001242	1	Each
130	130	Earth work excavation in ordinary soil and depositing with a lead up to 50 m and lift up to 1.50 m including neat banking	BI01010001010000000000000515BI0100001243	10	One cubic metre
131	131	Brick work in cement mortar 1:6 with country burnt bricks 19cm x 9cm x 9cm for foundation and basement.	BI01010001010000000000000515BI0100001244	10	One Square metre
132	132	Plastering with cement mortar 1:4, 12mm thick one coat.	BI01010001010000000000000515BI0100001245	50	One Square metre
133	133	Plain cement concrete 1:4:8 using 40mm ( Normal size ) broken stone. ( m3 )	BI01010001010000000000000515BI0100001246	5	One cubic metre
134	134	Part II (DG Set)Supply,installation,testing and commissioning of 100 KVA DG Set with Acousic Enclosure as per CPCB norms,preparing necceessary drawings, submission to Electrical Inspectorate ,getting approval etc all inclusive) extention exhaust pipe up to 5 metres including providing Aluminium cladding and inclusive of the items as detailed in the Appendix attached.	BI01010001010000000000000515BI0100001247	2	each
135	135	Supply of HSD	BI01010001010000000000000515BI0100001249	100	One Litre

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Kerala Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Nabard Ridf Xx Construction Of A Regulator Across Bharathapuzha At Koottakadavu In Anakkara Panchayath- Electrical Work, Anakkara Panchayath-Kerala

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Nabard Ridf Xx Construction Of A Regulator Across Bharathapuzha At Koottakadavu In Anakkara Panchayath- Electrical Work, Anakkara Panchayath-Kerala

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us