Repair / Replacement / Conversion Of Street Light Oh Line , Ug Cable Pole Box , Old Vintage Street Light With Other Connected Works At Manoj Pandey Vihar , Dhan Singh Thapa Vihar , 13 Engr With Other Connected Area Under Age E/M Of Ge Sukna
Tender Value
45 Lakhs
Estimated cost
Bid Submission
03 Sep 2019
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sukna → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair / Replacement / Conversion Of Street Light Oh Line , Ug Cable Pole Box , Old Vintage Street Light With Other Connected Works At Manoj Pandey Vihar , Dhan Singh Thapa Vihar , 13 Engr With Other Connected Area Under Age E/M Of Ge Sukna
BOQ
| Name of Work: REPAIR / REPLACEMENT / CONVERSION OF STREET LIGHT OH LINE, UG CABLE POLE BOX, OLD VINTAGE STREET LIGHT WITH OTHER CONNECTED WORKS AT MANOJ PANDEY VIHAR, DHAN SINGH THAPA VIHAR, 13 ENGR WITH OTHER CONNECTED AREA UNDER AGE E/M OF GE SUKNA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | S&F in repairs 45 watt LED street light fitting and including fixing arrangement made out of 40 mm bore GI pipe light grade of length not less than 1.2 m, bent to shape, fixed with two pairs of 40 x 5 mm MS flat iron clamps, nuts, bolts & washers to fix the fitting with pole complete all as specified and directed.\nMake :- Bajaj Cat No. BRTFG 45W LED V2 or equivalent in Philips / Havells / Surya / Wipro\n | 50 | Each | |
| 2 | 2 | All as per Sl item No. 1 above but 90 watt LED street light fitting.\nMake :- Bajaj Cat No. BRTFG 90W LED I V2 or equivalent in Philips / Havells / Surya / Wipro\n\n | 30 | Each | |
| 3 | 3 | All as per Sl item No. 1 above but 60 watt LED flood light fitting.\nMake :- Bajaj Cat No. BJFL 60W LED I or equivalent in Philips / Havells / Surya / Wipro\n | 20 | Each | |
| 4 | 4 | All as per Sl item No. 1 above but 200 watt LED flood light fitting.\nMake :- Bajaj Cat No. BJFL 200W LED I or equivalent in Philips / Havells / Surya / Wipro\n | 10 | Each | |
| 5 | 5 | S&F in repairs 40 watt LED post top lantern with aluminium die-cast housing & acrylic diffuser, IP 65 complete all as specified and as directed.\nMake :- Bajaj Cat No. BGCS 40W LED WH or equivalent in Philips / Havells / Surya / Wipro\n | 12 | Each | |
| 6 | 6 | S&F in repairs weather proof flat twin core cable with 2.5 Sqmm aluminium conductor for connection of street lights complete all as specified and as directed.\nMake :- Havells / Finolex / KEI / Polycab / RR Kabel Ltd.\n | 1500 | RM | |
| 7 | 7 | S&F in repairs 24 watt fluorescent tube rod, T-5, 6500 K complete all as specified and as directed.\nMake :- Havells / Surya / Philips / Bajaj / Wipro\n | 600 | Each | |
| 8 | 8 | S&F in repairs side holder suitable for existing 24 watt, T5 tubelight fitting complete all as specified and as directed.\n\n | 50 | Each | |
| 9 | 9 | S&F in repairs electronic ballast suitable for 2 x 24 watt T-5 lamp complete all as specified and as directed.\nMake:- Surya / Philips / Havells / Bajaj / Wipro\n | 150 | Each | |
| 10 | 10 | S&F in repair 12 KW, single phase automatic street light timer switch for automatic switching on / off street light based on lux level of nature light, consisting of sensor, overload protection fuse gear, power contactor & MCB of suitable capacity, terminal blocks for cable entry & control unit enclosed in pole / wall mountable enclosure made out of rust proof, shock proof, termite proof FR grade SMC, conforming to IP 54, with universal lock and key arrangement complete all as specified and as directed.\nMake:- Kakatiya energy system Pvt Ltd, Cat No. swadeep - 02 EC 12KW 1P or equivalent in Havells / GE\n\n | 5 | Each | |
| 11 | 11 | All as per Sl item No. 10 above but 12 KW, three phase automatic street light timer switch.\nMake:- Kakatiya energy system Pvt Ltd Cat No. swadeep - 02 EC 12KW 3P or equivalent in Havells / GE\n | 5 | Each | |
| 12 | 12 | Supply, installation, testing and commissioning of cubical type LT panel board, outdoor type, manufactured by CPRI approved factory, having overall minimum dimensions 1.20 m (L) X 1.00 m (H) X 0.50 m (W), made out of 3.15 mm thick CRCA steel sheet and including MS angle iron 50 x 50 x 6 mm frame work, legs 0.6 m long, totally enclosed, dust & vermin proof (IP-54), double leaf door shutter in front side and single leaf shutter in rear side fixed with hinges having necessary locking arrangement in both front and rear door, with four side projected slanting roof, duly powder coated of approved shade over a coat of red oxide primer both internally and externally and including mounting on PCC platform made out of PCC 1:3:6, 150 mm thick (100 mm below & 50 mm above GL) all round the panel board and including necessary earth work. The panel board shall be suitable for operation on AC 415 Volt, 3 Phase, 50 Hz, 4 wire system and shall have aluminium bus bar of 400 Amps capacity (main bus bar), 600 amp loop bus bar with colour insulating tape / sleeves mounted on porcelain or synthetic insulators, provision for fixing MCCBs / MCBs, necessary inter-connections with aluminium bus bar / strip with colour code insulation, LED indicating lamps (R, Y, B), digital voltmeter & ammeter of suitable capacity with selector switch and suitable CTs, connections of all outgoing / incoming, existing / new cables of required size with following accessories and taking down complete all as specified and direcetd:-\n | 5 | Each Job | |
| 13 | 12.01 | Incoming ;-\nMCCB 4 pole 250 Amp, 50KA - 1 No.\nOutgoing :-\nMCCB 4 pole 63 Amp, 25KA - 10 Nos.\nMake of MCCB :- Legrand / L & T / Siemens / ABB\nMake of voltmeter / ammeter :- Havells India Ltd. / HPL India Ltd. / L&T / Schneider / BCH\nMake of CT/PT:- AE / English Electric / Crompton Greaves / Areva T&D / Schneider\n | |||
| 14 | 13 | M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised iron strip of size 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed.\nNote:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 40 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.\n\n | 20 | Each Set | |
| 15 | 14 | Excavation in trenches not exceeding 1.5 m wide and n. exc 1.5 m in depth, getting out all excavated material and including bricks etc., in soft / loose soil complete all as specified and directed.\n | 891 | Cum | |
| 16 | 15 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.\n | 562 | Cum | |
| 17 | 16 | Removing of excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.\n | 329 | Cum | |
| 18 | 17 | M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. \nNote:- Punned thickness shall only be measured and paid.\n | 267 | Cum | |
| 19 | 18 | Supply & laying sub class 'B' bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed. | 22000 | Each | |
| 20 | 19 | All as per Sl. Item No.18 above but laying only.\nNOTE: Serviceable quantity obtainred from Sl. Item No. 14 shall be reused under this item | 4400 | Each | |
| 21 | 20 | Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 120 Sqmm x 3.5 Core, laid in trenches / duct / on pole and including taking out old cable complete all as specified and directed.\nMake :- Havells / KEI / Polycab / Finolex / Gloster cables Ltd / Asian Cable\n | 500 | RM | |
| 22 | 21 | All as per Sl item No.20 above but 70 sqmm x 3.5 core.\n\n | 100 | RM | |
| 23 | 22 | All as per Sl item No.20 above but 35 sqmm x 4 core.\n\n | 500 | RM | |
| 24 | 23 | All as per Sl item No.20 above but 16 sqmm x 4 core.\n\n | 2300 | RM | |
| 25 | 24 | S&F in repairs cable junction box of size not less than 205 mm (w) x 255 mm (h) x 112 mm (d) with terminals, weatherproof (protected against UV due to solar radiation, rainwater, temperature resistant, impact resistant, etc,) IP 66, with internally embedded gasket (PUR), cover and pre-moulded knockout all sides, fixing arrangement with MS flat of size 40 x 4 mm, necessary nuts, bolt and wahsers complete all as specified and directed.\nMake :- Hensel Cat No. KF 2525 B or equivalent in Sintex Industries Ltd. / C&S electric Ltd. | 111 | Each | |
| 26 | 25 | Boring holes horizontally under road, manually, in soft / loose soil, without cutting / disturbing the existing road surface, suitable for inserting pipe of n exc. 80 mm bore at a depth 0.75 m to 1.0 m from road surface for passing of UG cable, getting out and disposal of soil to a distance not exceeding 50 m complete all as specified and as directed.\nNote:- GI Pipe shall be measured and paid separately.\n | 40 | RM | |
| 27 | 26 | M&L 80 mm bore galvanised steel water tubing, light grade with necessary fittings, laid under road crossing or fixed along electric pole etc, for cable protection complete all as specified and directed.\nMake :- Tata / Jindal Steel / Prakash\n | 20 | RM | |
| 28 | 27 | All as per Sl item No. 26 above but 40 mm bore.\n\n\n | 25 | RM | |
| 29 | 28 | Surface dressing in soft /loose soil not exeeding 15 cm deep, around panel poards, poles etc, and including disposal of materials up to a distance not exceeding 50 m complete all as specified and directed. | 250 | Sqm | |
| 30 | 29 | Supply, spreading and leveling 20 mm size graded crushed stone aggregate around panel poards, poles etc, complete all as specified and directed. | 30 | Cum | |
| 31 | 30 | M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping of electric poles and including necessary formwork and demolition complete all as specified and directed. | 2 | Cum | |
| 32 | 31 | M&L cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections and including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and including preparation of surfaces and applying two coats of aluminium paint over a coat of red oxide primer and dismantling complete all as specified and directed.\nMake of paint : Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)\n | 2 | Quintal |
AI Tender Summary
Tender Timeline
Aug 20, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 04, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender