}

Protection Of Dda Land At South Zone Construction Of Fly Ash Brick Masonry Boundary Wall , Repair An Plugging Of Breaches Of Existing R . R . Walls And Installation Of Dda Sign Board On Vacant Land Falling Under Jurisdiction Of Swd-2 Dda And Well As Han, VASANT KUNJ NEW DELHI-Delhi

Delhi Development Authority-DDA has published Protection Of Dda Land At South Zone Construction Of Fly Ash Brick Masonry Boundary Wall , Repair An Plugging Of Breaches Of Existing R . R . Walls And Installation Of Dda Sign Board On Vacant Land Falling Under Jurisdiction Of Swd-2 Dda And Well As Han. Submission Date for this Tender is 28-08-2019. Wall construction Tenders in VASANT KUNJ NEW DELHI Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

21470540
Protection Of Dda Land At South Zone Construction Of Fly Ash Brick Masonry Boundary Wall , Repair An Plugging Of Breaches Of Existing R . R . Walls And Installation Of Dda Sign Board On Vacant Land Falling Under Jurisdiction Of Swd-2 Dda And Well As Han
Open Tender
Indian
Delhi
VASANT KUNJ NEW DELHI
28-08-2019

Tender Details

Protection Of Dda Land At South Zone Construction Of Fly Ash Brick Masonry Boundary Wall , Repair An Plugging Of Breaches Of Existing R . R . Walls And Installation Of Dda Sign Board On Vacant Land Falling Under Jurisdiction Of Swd-2 Dda And Well As Handing Over Of New Lands To Ae ( Qrt ) Swd2

Key Value

Document Fees
Refer document
EMD
INR 42247.0 /-
Tender Value
INR 21.12 Lakhs /-

BOQ Items

Name of work: Protection of DDA land at South Zone. Sub-Head : Construction of fly ash brick masonry boundary wall, repair & plugging of breaches of existing R.R. walls and installation of DDA Sign Board on vacant land falling under jurisdiction of SWD-2/DDA as well as handing over of new Lands to AE(QRT)/SWD-2 by the LM/NL/S&S wings in near future. Estimated Cost : 21,12,344/-
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.\n(a) All kinds of soil. 144 Cum
2 2.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\n(a) 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) 12 Cum
3 2.2 (b) 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 6 Cum
4 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:\n(a) Cement mortar 1:6 (1 cement : 6 coarse sand) 88 Cum
5 4 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :\n(a) Cement mortar 1:6 (1 cement : 6 coarse sand) 155 Cum
6 5 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):\n(a) Flush / Ruled/ Struck or weathered pointing 900 Sqm.
7 6 Providing and fixing 1.25mm thick in M.S. Sheet board of size 0.90x1.20 Mtr. with frame 40x40x5mm angle iron consisting of 2 Nos. post 3.00 Mtr. length and bracing 2 Nos. 35x35x5mm angle iron i/c cutting, welding, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per direction of Engineer-in-charge. 2 Each
8 7 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.\n(a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 300 Kg.
9 8 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\n(a) Two or more coats on new work 13 Sqm.
10 9 Lettering with black Japan paint of approved brand and manufacture 825 per letter\nper cm height
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail