Supplying , Erecting , Testing And Commissioning Of Six Passenger Lift To Administrative Building At Panchayat Samiti Mul
Tender Value
14.75 Lakhs
Estimated cost
Bid Submission
31 Aug 2019
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mul → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supplying , Erecting , Testing And Commissioning Of Six Passenger Lift To Administrative Building At Panchayat Samiti Mul
BOQ
| Name of Work: Supplying ,Erecting,Testing & Commissioning of Six Passenger Lift to Administrative Building (G+2Floors) at Panchayat Samiti Mul Dist Chandrapur T.S.NO OD/40/2019-20 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SITC of Electric Traction Passenger Lift with • Rated capacity :- 6 Passenger/408Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MR/MRL • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights,blower/fan for ventilation & SS chequered plate flooring,handrails, mirror, emergency light etc.• COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch,OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor • Clear Car size of 1100 mm wide x 1100 mm deep x 2000 mm high • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor / control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Lan CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18\" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.• Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength • Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery,adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc.complete as per specification no. LFT.• Lift shaft available having clear size of 1650 mm wide x 1500mm deep, 1600 mm Pit depth, 4200 mm overhead (CSR IT NO 7/1/2 ) For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrowsindicators,extension of guide rails, shaft wiring with trunking, traveling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete Add Note A(2) For additional 2MP Camera along with necessary accessories at Home Landing, add as given. Add Note D For vision panel having Size 100mm wide x 200mm high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself. Add Note F (Note- Only MOU with Jhonson or Kone lift manufacturer / Authorised Dealers is allowed) | BI01010001010000000000000515BI0100001113 | 1 | Pts |
| 2 | 2 | Supplying and erectingCorridor/Passage light fitting( 2 feet) including 18W LED lamp, Comprises of Extruded channel in Plastic Silver gray Color & With same Plastic end cap on provided PVC block / wooden board (CSR it No 2/5/20) | BI01010001010000000000000515BI0100001114 | 3 | Nos |
| 3 | 3 | Providing earthing with Galvanished cast iron plate size 60x60x0.6 cm complete with all materials ,testing & recording the results as per specification No EA-EP (CSR it No 9/1/1) | BI01010001010000000000000515BI0100001115 | 2 | Nos |
| 4 | 4 | Supplying standard first aid Box with necessary antiseptic cream medicine for use on wounds due burn,crepe,bandage,gauge bandage,medicated ready to use bandage(Biand-aid) adhesive tape for medicine use scissor, anti septic sloution tec. (CSR it No 10/2/27) | BI01010001010000000000000515BI0100001116 | 1 | Nos |
| 5 | 5 | Supplying & erecting Carbon Dioxide (Co2) fire Extinguisher of 4.5 kg capacity catridge type conf to IS 2878 complete erected with necessary clamps made from front 50x6 mm M.S flat with nuts & bolts grouted in wall complete (CSR it No 10/2/36) | BI01010001010000000000000515BI0100001117 | 1 | Nos |
| 6 | 6 | Supplying and erecting double pole metal clad switch with HC type fuse and neutral link 240V, 32A on iron / GI frame as per specification no. SW-SWR/MDP .(CSR it No 5/1/3) | BI01010001010000000000000515BI0100001118 | 1 | Nos |
| 7 | 7 | Supplying, erecting & terminating XLPE armoured cable 2 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR it No 7/1/5) | BI01010001010000000000000515BI0100001119 | 40 | Nos |
| 8 | 8 | Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 6 ways for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB (CSR it No 5/4/15) | BI01010001010000000000000515BI0100001120 | 1 | Mtr |
| 9 | 9 | Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB (CSR it No 5/6/2) | BI01010001010000000000000515BI0100001121 | 1 | Mtr |
| 10 | 10 | Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB (CSR it No 5/3/2) | BI01010001010000000000000515BI0100001122 | 2 | Nos |
| 11 | 11 | Supplying, erecting & marking SPMCB 6A to 32A, C-series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB (CSR it No 5/3/3) | BI01010001010000000000000515BI0100001123 | 4 | Nos |
| 12 | 12 | Supplying & erecting mains with 2x1.5 sq.mm. FRLSH copper wire, in 16gauge 20 mm dia. Rigid Steel conduit with continuous GI earth wire of 2.5 sq.mm. as per specification No:WG-MA/MC (CSR it No 1/5/2). | BI01010001010000000000000515BI0100001124 | 15 | Nos |
| 13 | 13 | Supplying & erecting mains with 2x2.5 sq.mm. FRLSH copper wire, in 16gauge 20 mm dia. rigid steel conduits, with continuous GI earth wire of 2.5sq.mm. as per specification No: WG-MA/MC (CSR it No 1/5/4). | BI01010001010000000000000515BI0100001125 | 10 | Nos |
| 14 | 14 | Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No:WG-PW/SW (CSR it No 1/9/2) | BI01010001010000000000000515BI0100001126 | 10 | Nos |
| 15 | 15 | Supplying and erecting flush type shockproof plug socket 6A & 16A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board. (CSR it No 1/7/13) | BI01010001010000000000000515BI0100001127 | 1 | Nos |
| 16 | 16 | Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW (CSR it No 1/9/13) | BI01010001010000000000000515BI0100001128 | 5 | Nos |
| 17 | 17 | Supplying & erecting decorative pre-wired box type fitting/batten suitable for 4 feet, T8 LED tube light (excluding tube light). (CSR it No 2/1/1) | BI01010001010000000000000515BI0100001129 | 2 | Nos |
| 18 | 18 | Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary. (CSR it No 2/10/14) | BI01010001010000000000000515BI0100001130 | 2 | Nos |
| 19 | 19 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. (CSR it No 2/10/11) | BI01010001010000000000000515BI0100001131 | 6 | Nos |
| 20 | 20 | Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no. FG-IDF/BHF (CSR it No 2/2/5) | BI01010001010000000000000515BI0100001132 | 5 | Nos |
| 21 | 21 | Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF (CSR it No 2/12/3) | BI01010001010000000000000515BI0100001133 | 1 | Nos |
| 22 | 22 | Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. (CSR it No 2/12/15) | BI01010001010000000000000515BI0100001134 | 1 | Nos |
| 23 | 23 | Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original. (CSR it No 2/12/15) | BI01010001010000000000000515BI0100001135 | 1 | Nos |
| 24 | 24 | Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts,plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm. (CSR it No 2/13/11) | BI01010001010000000000000515BI0100001136 | 1 | Mtr |
| 25 | 25 | Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC (CSR it No 2/13/14) | BI01010001010000000000000515BI0100001137 | 1 | Mtr |
| 26 | 26 | Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board. (CSR it No 2/13/9) | BI01010001010000000000000515BI0100001138 | 1 | Nos |
| 27 | 27 | Supplying and erecting triple pole metal clad HC type rewireable fuse and switch 415, V 32A with neutral link on angle iron / GI frame as per specification no. SW-SWR/MTP. (CSR it No 2/13/9) | BI01010001010000000000000515BI0100001139 | 2 | Nos |
| 28 | 28 | Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL (CSR it No 7/1/29) | BI01010001010000000000000515BI0100001140 | 50 | Nos |
| 29 | 29 | Supplying, fixing and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 32A/40A as per specification no SW-RCCB/RCBO (CSR it No 5/6/15) | BI01010001010000000000000515BI0100001141 | 1 | Mtr |
| 30 | 30 | Supplying & fixing CRCA sheet Box with earthing terminals for housing 4 Pole RCCB on iron frame/laminated board complete. (CSR it No 5/6/10) | BI01010001010000000000000515BI0100001150 | 1 | Kg |
AI Tender Summary
Tender Timeline
Aug 20, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 03, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender