| 1 | 1 | M&L for repairs to pot holes any depth not exceeding 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc, cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5Kg/10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg/10 Sqm, using bitumen grade VG-30 and blinded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed macadam binder and chips) depth of pot holes exceeding 30mm complete all as specified and as directed. | | 20 | TEN\n SQM |
|---|
| 2 | 2 | M&L for preparation of black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc all as specified and as directed. | | 280 | TEN\n SQM |
|---|
| 3 | 3 | M&L for applying evenly a priming/tack coat with bituminous primer over existing black top surfaces at 5Kg/10 Sqm using paving bitumen grade VG-30 with sprayer complete all as specified and as directed. | | 280 | TEN\n SQM |
|---|
| 4 | 4 | M & L for Bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix rolled and compacted to required camber and gradient with power roller 10 to 12 tonne capacity complete all as specified and as directed.\nNote: Contractor shall quote his rate by considering 5.5% bitumen content. If it is less than 5.5% by weight of total mix, the amount shall be recovered for the less weight of binder only at the rate of Rs 42/- per Kg if technically acceptable. No other claim whatsoever on account of this will be allowed.\n | | 300 | TEN SQM |
|---|
| 5 | 5 | M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm, exceeding 50mm and not exceeding 100mm deep including removing to a distance not exceeding 50mtr and stacking complete all as specified and as directed. | | 20 | X SQM |
|---|
| 6 | 6 | M&L for premixed bituminous macadam with paving bitumen grade VG-30 @ 4% by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) all as specified and as directed. Note : Contractor shall quote his rate by considering 4% bitumen content if it is less than 4% by weight of total mix, the amount shall be recovered for the less weight of binder only at the rate of Rs 42/- per kg if technically acceptable. No other claims whatsoever on account of this will be allowed. | | 2 | CUM |
|---|
| 7 | 7 | M&L for 150mm thick WBM (compacted thickness) in two layers of 75mm thick, with granite, trap or basalt coarse aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) spread, rolled and consolidated to required gradient and camber complete all as specified and as directed. | | 20 | X SQM |
|---|
| 8 | 8 | M&L for preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed. | | 20 | X SQM |
|---|
| 9 | 9 | M&L for applying evenly a priming/tack coat with bituminous primer at 10Kg/10 Sqm using paving bitumen grade VG-30 with sprayer complete all as specified and as directed. | | 20 | TEN\n SQM |
|---|
| 10 | 10 | M&L for providing and applying 2.5mm thick road marking strips exceeding 10cm wide (Retro reflective) of specified shade/colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cleaning the road surface of all dirt, seals, oil, grease and foreign material etc and accordance with manufacturers specifications complete all as specified and as directed. | | 200 | SQM |
|---|
| 11 | 11 | S&F solar studs made out of aluminium composite body OF size 100mmx100mmx21mm fixed with bright LEDs 2 Nos (RED) on each side fixed using adhesive or self expanding scews as per manufacturer’s instructions and as directed by Engineer-in-charge. Make : Tata BP/Dark eye/Green light. | | 40 | EACH |
|---|
| 12 | 13 | S&F delinator posts made of 75mm outer dia MS pipe with mesh complete with Six Nos retro reflective tape (high intensity prismatic). The poles painted with two coats of synthetic enamel paint over a coat red oxide primer including fixing to roadsides with PCC 1:3:6 type C1 and earth work complete all as specified and as directed.\nMake : Reflective tapes preferable AVERY DENNISON Co, USA)\n | | 30 | EACH |
|---|
