Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #21439508

Supply Of Op Wks Stores

Issued by Statutory Bodies & Commissions/Committees · Old Air Field, Srinagar, Jammu andKashmir, Jammu And Kashmir
Tender Value
45 Lakhs
Estimated cost
Bid Submission
11 Sep 2019
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Old Air Field, Srinagar, Jammu andKashmir → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply Of Op Wks Stores , Constr Mtrl , Main Gate . Mild Steel Gate 5 . 5 M Wide And 2 . 25 M High Made Up Of Isa 65 X 65 X 6 Mm And 10 Mm Square Bars Welded To Ismb Along-175 With Small Door Opening Of Size 1 . 00M X 0 . 6M Including Necessary Hings , Locking Bolts Complete As Shown In Drawing . Including Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer . The Ismb ( Gate Pillars ) Shall Be Embedded In Pcc 1:2:4 Foundation Of Size 450 X 450 X 750Mm . As Per Appx E . ( One Main Gate Per Km ) . Delivery Location Anantnag High Ground , Wicket Gate . Mild Steel Gate 1 . 2M Wide And 2 . 1M High , Made Up Of Isa 65 X 65 X 6Mm And 10Mm Square Bars Welded To Ismb-150 Including Necessary Hings , Locking Bolts Complete As Shown In Drawing . Including Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer . The Ismb ( Gate Pillars ) Shall Be Embedded In Pcc 1:2:4 Foundation Of Size 450 X 450 X 750Mm . As Per Appx F . ( Two Wicket Gates Per Km ) . Delivery Location Anantnag High Ground , Galvanised Steel Barbed Wire , Isi Marked A-5 Designation For Galvanised Steel Barbed Wire For Fencing Shall Conform To Is 278-1978 . The Barbed Wire Shall Consist Of Two Line Wire 2 . 24Mm Dia ( Tensile Strength 390 - 590 N / Mm2 Minimum Breaking Load Of Complete Barbed Wire 3Kn ) , One Or Both Containing 2 . 00 Mm Dia Barbs At 75 Mm Center To Center And Weighing 97 To 106 Kg Per Km . The Barbs Shall Have A Length Of Not Less Than 13 Mm And Not More Than 18 Mm . The Line Of And Point Wires Shall Be Circular In Section , Free From Scales And Other Defects And Shall Be Uniformly Galvanised . The Line Wire Shall Be In Continuous Length And Shall Not Contain Any Welds Other Than Those In The Rod Before It Is Drawn . The Galvanising Shall Conform To The Requirement As Laid Down For Light - Coated Wire Of Is 4826-1968 Specification For Galvanised Coating On Round Steel Wires . Barbing Wire ( Line ) Shall Be Hard Type Heavy Coated ( 230 Gm / Sq M ) And Barbing Wire ( Point ) Shall Be Hard Type Light Coated ( 70 Gm / Sq M ) . The Galvanised Barbed Wire Will Be Bundles Of 25 To 30 Kgs Each And The Bundles Will Be Packed In Hessian Cloth , The Bundles Should Be Strong Enough To Withstand Rough Handling During Transportation . Every Reel Of Barbed Wire Shall Be Marked Legibly With Bis Standard Make The Name Of Manufacture , The Type Of Barbed Wire , The Diameter Of The Line And Point Wires , Barb Spacing And Length And / Or Mass Of The Reel . Delivery Location Anantnag High Ground , Sfabricated Structural Steel Rolled Section For Fencing Post Made Out Of Angle Iron 65 X 65 X 6Mm Of 2 . 7Mtr Long ( 20 . 88 Kgs ) And 0 . 9 Mtr Long Swan Neck Including Making 16 Slots And Notched Round Holes Of 6Mm For Vertical Post For Fixing Barbed Wire And Splitting Of Bottom End For 15Cm Of Picket For Anchorage . The Fencing Post Shall Be Applied Two Coats Of Synthetic Enamel Paint Bus Green Over A Coat Of Red Oxide Primer . The Bottom 600 Mm Length Of Angle Post Shall Be Applied One Coat Of Red Oxide Primer Only , Conforming To Is 808-1989 . Delivery Location Anantnag High Ground , Fabricated Mild Steel Angle Iron Struts 65 X 65 X 6 Mm Of 2 . 70 M Long With Swan Neck At 135 Degree Of 20 Cm Length For Supports At Corners Including Two Holes Of 10 Mm Dia For Fixing With Vertical Post Including Two Coats Of Synthetic Enamel Paint Bus Green Over A Coat Of Red Oxide Primer . The Bottom 600 Mm Length Of Angle Post Shall Be Applied One Coat Of Red Oxide Primer , Conforming To Is 808-1989 . Delivery Location Anantnag High Ground , Ms Bolts Of 10 Mm Dia 40 Mm Long Having Head Hexagonal Alongwith Nuts And Two Washers . Delivery Location Anantnag High Ground , Cement Opc 43 Grade In Bag Of 50 Kg Each Conforming To Is-8112-1989 . Delivery Location Anantnag High Ground , Natural Sand Confirming To Is 383-1970 ( Specifications For Coarse And Fine Aggregates . Free From Adherent Coating , Hard , Durable , Clean And Shall Not Contain Clay And Impurities Such Iron Pyrites , Alkalies , Salt , Coal , Mica , Shale Or Similar Laminates Or Other Materials Exceeding The Specified Limits In Is Code Aggregates For Concrete . Delivery Location Anantnag High Ground , Aggregate 20 Mm . Stone Aggregate To Be Crushed Rock Or Gravel 20 Mm Graded Conforming To Is 383-1970 ( Second Revision ) And Shall Consist Or Angular Fragments And Shall Be Clean , Hard , Tough , Durable And Of Uniform Quality Through Out . Delivery Location Anantnag High Ground , Ms Binding Wire Not Less Than 0 . 9 Mm Dia . Delivery Location Anantnag High Ground

BOQ

Name of Work: < Supply of Op Wks Store>
Sl.No.Item DescriptionItem Code / MakeQuantity +/- 50%Units
11Constr Mtrl
21.01Main Gate. Mild steel gate 5.5 m wide and 2.25 m high made up of ISA 65 x 65 x 6 mm and 10 mm square bars welded to ISMB along-175 with small door opening of size 1.00m x 0.6m including necessary hings, locking bolts complete as shown in drawing. Including two coats of synthetic enamel paint over a coat of red oxide primer. The ISMB (Gate pillars) shall be embedded in PCC 1:2:4 foundation of size 450 x 450 x 750mm. As per Appx 'E'. (One Main Gate per Km). Delivery Location Anantnag High Grounditem15Nos
31.02Wicket Gate. Mild steel gate 1.2m wide and 2.1m high, made up of ISA 65 x 65 x 6mm and 10mm square bars welded to ISMB-150 including necessary hings, locking bolts complete as shown in drawing . Including two coats of synthetic enamel paint over a coat of red oxide primer. The ISMB (Gate pillars) shall be embedded in PCC 1:2:4 foundation of size 450 x 450 x 750mm. As per Appx 'F'. (Two wicket Gates per Km). Delivery Location Anantnag High Grounditem210Nos
41.03Galvanised Steel Barbed Wire, ISI marked A-5 designation for Galvanised steel barbed wire for fencing shall conform to IS 278-1978. The barbed wire shall consist of two line wire 2.24mm dia (Tensile strength 390 - 590 N/mm2 minimum breaking load of complete barbed wire 3kN), one or both containing 2.00 mm dia barbs at 75 mm center to center and weighing 97 to 106 Kg per Km. The barbs shall have a length of not less than 13 mm and not more than 18 mm. The line of and point wires shall be circular in section, free from scales and other defects and shall be uniformly galvanised. The line wire shall be in continuous length and shall not contain any welds other than those in the rod before it is drawn. The galvanising shall conform to the requirement as laid down for light - coated wire of IS 4826-1968 Specification for galvanised coating on round steel wires. Barbing wire (line) shall be hard type heavy coated (230 gm/sq m) and barbing wire (point) shall be hard type light coated (70 gm/sq m). The Galvanised barbed wire will be bundles of 25 to 30 Kgs each and the bundles will be packed in hessian cloth, the bundles should be strong enough to withstand rough handling during transportation. Every reel of barbed wire shall be marked legibly with BIS standard make the name of manufacture, the type of barbed wire, the diameter of the line and point wires, barb spacing and length and/or mass of the reel. Delivery Location Anantnag High Grounditem38248Kgs
51.04SFabricated structural steel rolled section for fencing post made out of angle iron 65 x 65 x 6mm of 2.7mtr long(20.88 Kgs) and 0.9 mtr long swan neck including making 16 slots and notched round holes of 6mm for vertical post for fixing barbed wire and splitting of bottom end for 15cm of picket for anchorage. The fencing post shall be applied two coats of synthetic enamel paint bus green over a coat of red oxide primer. The bottom 600 mm length of angle post shall be applied one coat of red oxide primer only, conforming to IS 808-1989. Delivery Location Anantnag High Grounditem41670Nos
61.05Fabricated Mild steel Angle iron struts 65 x 65 x 6 mm of 2.70 m long with swan neck at 135 degree of 20 cm length for supports at corners including two holes of 10 mm dia for fixing with vertical post including two coats of synthetic enamel paint bus green over a coat of red oxide primer. The bottom 600 mm length of angle post shall be applied one coat of red oxide primer ,conforming to IS 808-1989. Delivery Location Anantnag High Grounditem5170Nos
71.06MS Bolts of 10 mm dia 40 mm long having head hexagonal alongwith Nuts and two washers. Delivery Location Anantnag High Grounditem6340Nos
81.07Cement OPC 43 Grade in Bag of 50 kg each conforming to IS-8112-1989. Delivery Location Anantnag High Grounditem71060Bags
91.08Natural sand confirming to IS 383-1970 (Specifications for coarse and fine aggregates. Free from adherent coating, hard, durable, clean and shall not contain clay and impurities such iron pyrites, alkalies, salt, coal, mica, shale or similar laminates or other materials exceeding the specified limits in IS code aggregates for concrete. Delivery Location Anantnag High Grounditem8111Cum
101.09Aggregate 20 mm. Stone Aggregate to be crushed rock or gravel 20 mm graded conforming to IS 383-1970 (Second revision) and shall consist or angular fragments and shall be clean, hard, tough, durable and of uniform quality through out. Delivery Location Anantnag High Grounditem9126.75Cum
111.1MS Binding wire not less than 0.9 mm dia. Delivery Location Anantnag High Grounditem1080Kgs

AI Tender Summary

OUR REF NO 21439508
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 45 Lakhs
LAST DATE 11-09-2019
Authority
Authority Name Indian Army
Work Description Supply Of Op Wks Stores , Constr Mtrl , Main Gate . Mild Steel Gate 5 . 5 M Wide And 2 . 25 M High Made Up Of Isa 65 X 65 X 6 Mm And 10 Mm Square Bars Welded To Ismb Along-175 With Small Door Opening Of Size 1 . 00M X 0 . 6M Including Necessary Hings , Locking Bolts Complete As Shown In Drawing . Including Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer . The Ismb ( Gate Pillars ) Shall Be Embedded In Pcc 1:2:4 Foundation Of Size 450 X 450 X 750Mm . As Per Appx E . ( One Main Gate Per Km ) . Delivery Location Anantnag High Ground , Wicket Gate . Mild Steel Gate 1 . 2M Wide And 2 . 1M High , Made Up Of Isa 65 X 65 X 6Mm And 10Mm Square Bars Welded To Ismb-150 Including Necessary Hings , Locking Bolts Complete As Shown In Drawing . Including Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer . The Ismb ( Gate Pillars ) Shall Be Embedded In Pcc 1:2:4 Foundation Of Size 450 X 450 X 750Mm . As Per Appx F . ( Two Wicket Gates Per Km ) . Delivery Location Anantnag High Ground , Galvanised Steel Barbed Wire , Isi Marked A-5 Designation For Galvanised Steel Barbed Wire For Fencing Shall Conform To Is 278-1978 . The Barbed Wire Shall Consist Of Two Line Wire 2 . 24Mm Dia ( Tensile Strength 390 - 590 N / Mm2 Minimum Breaking Load Of Complete Barbed Wire 3Kn ) , One Or Both Containing 2 . 00 Mm Dia Barbs At 75 Mm Center To Center And Weighing 97 To 106 Kg Per Km . The Barbs Shall Have A Length Of Not Less Than 13 Mm And Not More Than 18 Mm . The Line Of And Point Wires Shall Be Circular In Section , Free From Scales And Other Defects And Shall Be Uniformly Galvanised . The Line Wire Shall Be In Continuous Length And Shall Not Contain Any Welds Other Than Those In The Rod Before It Is Drawn . The Galvanising Shall Conform To The Requirement As Laid Down For Light - Coated Wire Of Is 4826-1968 Specification For Galvanised Coating On Round Steel Wires . Barbing Wire ( Line ) Shall Be Hard Type Heavy Coated ( 230 Gm / Sq M ) And Barbing Wire ( Point ) Shall Be Hard Type Light Coated ( 70 Gm / Sq M ) . The Galvanised Barbed Wire Will Be Bundles Of 25 To 30 Kgs Each And The Bundles Will Be Packed In Hessian Cloth , The Bundles Should Be Strong Enough To Withstand Rough Handling During Transportation . Every Reel Of Barbed Wire Shall Be Marked Legibly With Bis Standard Make The Name Of Manufacture , The Type Of Barbed Wire , The Diameter Of The Line And Point Wires , Barb Spacing And Length And / Or Mass Of The Reel . Delivery Location Anantnag High Ground , Sfabricated Structural Steel Rolled Section For Fencing Post Made Out Of Angle Iron 65 X 65 X 6Mm Of 2 . 7Mtr Long ( 20 . 88 Kgs ) And 0 . 9 Mtr Long Swan Neck Including Making 16 Slots And Notched Round Holes Of 6Mm For Vertical Post For Fixing Barbed Wire And Splitting Of Bottom End For 15Cm Of Picket For Anchorage . The Fencing Post Shall Be Applied Two Coats Of Synthetic Enamel Paint Bus Green Over A Coat Of Red Oxide Primer . The Bottom 600 Mm Length Of Angle Post Shall Be Applied One Coat Of Red Oxide Primer Only , Conforming To Is 808-1989 . Delivery Location Anantnag High Ground , Fabricated Mild Steel Angle Iron Struts 65 X 65 X 6 Mm Of 2 . 70 M Long With Swan Neck At 135 Degree Of 20 Cm Length For Supports At Corners Including Two Holes Of 10 Mm Dia For Fixing With Vertical Post Including Two Coats Of Synthetic Enamel Paint Bus Green Over A Coat Of Red Oxide Primer . The Bottom 600 Mm Length Of Angle Post Shall Be Applied One Coat Of Red Oxide Primer , Conforming To Is 808-1989 . Delivery Location Anantnag High Ground , Ms Bolts Of 10 Mm Dia 40 Mm Long Having Head Hexagonal Alongwith Nuts And Two Washers . Delivery Location Anantnag High Ground , Cement Opc 43 Grade In Bag Of 50 Kg Each Conforming To Is-8112-1989 . Delivery Location Anantnag High Ground , Natural Sand Confirming To Is 383-1970 ( Specifications For Coarse And Fine Aggregates . Free From Adherent Coating , Hard , Durable , Clean And Shall Not Contain Clay And Impurities Such Iron Pyrites , Alkalies , Salt , Coal , Mica , Shale Or Similar Laminates Or Other Materials Exceeding The Specified Limits In Is Code Aggregates For Concrete . Delivery Location Anantnag High Ground , Aggregate 20 Mm . Stone Aggregate To Be Crushed Rock Or Gravel 20 Mm Graded Conforming To Is 383-1970 ( Second Revision ) And Shall Consist Or Angular Fragments And Shall Be Clean , Hard , Tough , Durable And Of Uniform Quality Through Out . Delivery Location Anantnag High Ground , Ms Binding Wire Not Less Than 0 . 9 Mm Dia . Delivery Location Anantnag High Ground
Basic Detail
Tender No 2518/QTN/09/19-20/OPW
Bidding Type Tender
Location
City Old Air Field, Srinagar, Jammu andKashmir
State Jammu And Kashmir
Key Dates
Publish Date 17 Aug 2019
Submission Date 11 Sep 2019
Open Date 12 Sep 2019
Finance
Tender Value 45 Lakhs
Tender Fee Ref. Documents
EMD 90000
Exemption Not Available
Document List
RFP.pdf
91815D97-D6D7-47F4-9822-958524D5E8DC.html
BOQ_309169.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 17, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 11, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 12, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

RFP.pdf

html

91815D97-D6D7-47F4-9822-958524D5E8DC.html

xls

BOQ_309169.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders