| 1 | 1 | Supply and erection of Vertical Turbine Pump Set with all required accessories having the following specifications .<br><br>Pump:- The duty Conditions are <br> Discharge 13.5 lps<br> Total Head- 118 m<br> Column pipe 15 meters <br><br>Delivery size is to be suitable for coupling with squirrel cage induction motor column pipe shall be MS 8mm thick and flanged with the length of individual column pipe as a maximum of 1.50 m<br>Motor:- <br> The motor shall be squirrel cage induction motor of adequate capacity to drive the pump set at the specified duty conditions. The motor shall be suitable for operating on 415 volts 3 phase 50 Hz AC supply and shall conform to IS 315 and other relevant standards.RPM shall be less than 1500<br>Sluice Valves & Reflux Valves-<br><br> The Sluice Valves and reflux Valves shall be of C.I. double flanged and shall be marked by ISI.<br> The Valves shall be of PN 1.6/2.00<br>Pressure Gauge : -<br> The pressure gauge shall be capable for reading up to 200 m head and shall be coupled with suitable <br> stop cock.<br>Starter:-<br> Suitable Auto Transformer /Soft Starter confirming to relevant KSEB and EI requirements shall be supplied <br> and erected. The Starter shall have necessary protective measures .<br>Panel Board:- <br> Panelboard shall be floor /Wall mounted type, a cubical board consisting of suitable capacity MCCB, bus bars, HRC fuse, Voltmeter, Ammeter, Selector Switches, Indicator lamps, etc. The Panel Board shall conform to KSEB regulations and requirements. The Panel board should also have the facilities and capacity for operating 2 numbers of the motor of the above Capacity and shall have necessary interlocking arrangements. Existing motor should be connected to the new panel board.It should have the facility for providing one breaker of required capacity as incoming and 2 numbers of breakers as outgoing.<br>Capacitor<br>The Capacitor should be MPP/APP type having super heavy duty ISI marked and should be of adequate capacity to regulate the power factor to 0.90 or above.<br><br><br><br><br>\n | BI01010001010000000000000515BI0100001113 | 64 | HP |
|---|
| 2 | 2 | Fabricating MS pipes of size 150mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates | BI01010001010000000000000515BI0100001114 | 10 | Metre |
|---|
| 3 | 3 | Fabricating MS pipes of size 200mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates | BI01010001010000000000000515BI0100001115 | 10 | Metre |
|---|
| 4 | 4 | Fabricating MS flanges of diameter 200 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates | BI01010001010000000000000515BI0100001116 | 8 | Nos |
|---|
| 5 | 5 | Fabricating MS flanges of diameter 150 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates | BI01010001010000000000000515BI0100001117 | 12 | Nos |
|---|
| 6 | 6 | Cutting 200 mm (ID) MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates | BI01010001010000000000000515BI0100001118 | 10 | Nos |
|---|
| 7 | 7 | Construction of chamber for 100mm sluices valveWelding 200 mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates | BI01010001010000000000000515BI0100001119 | 10 | Nos |
|---|
| 8 | 8 | Grinding cut and weld edges of 200 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates.\n | BI01010001010000000000000515BI0100001120 | 10 | Nos |
|---|
| 9 | 9 | Cutting 150mm (ID)MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates.\n | BI01010001010000000000000515BI0100001121 | 12 | Nos |
|---|
| 10 | 10 | Welding 150mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates | BI01010001010000000000000515BI0100001122 | 12 | Nos |
|---|
| 11 | 11 | Grinding cut and weld edges of 150mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates | BI01010001010000000000000515BI0100001123 | 10 | Nos |
|---|
| 12 | 12 | Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)\n | BI01010001010000000000000515BI0100001125 | 3.073 | cum |
|---|
