Public Administrative Department Government Departments Closing in 0 days TDR #21415406

Tender For Office Interior Works

Issued by Government Departments · MUMBAI, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Aug 2019
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
MUMBAI → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Office Interior Works

BOQ

Name of Work: OFFICE INTERIOR WORKS
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11CARPENTRY WORK
21.01Providing & Fixing Main Entrance Door made out of 45mm thick block board, with TW beading patti, door frame finished in ply in line & level, all finished with both side laminate and French polished with hinges, tower bolt, night latch, handle and a dead lock, complete.( 7’ x 3’6” ) (Reference Drawing no.3)1LS
31.02Providing & Fixing main entrance Glass Door with wooden frame, laminate finished both side, 8mm thick glass with design and name engraved on glass, with hinges, dead lock, handle and door closer, French polished, complete. (7’ x 3’6”) (Reference Drawing no.3)1LS
41.03Providing & Fixing Cabin doors made out of 35mm thick block board, with TW frame along with the partition and beading patti, both side laminate finished, with hinges, mortise lock, tower bolt, complete (7’ x 3’ 0”) GM, CM, SR.3Each
51.04Providing & Fixing Cabin doors made out of 35mm thick block board, TW frame along with the partition and beading patti, both side laminate finished, with hinges, mortise lock, tower bolt, complete (7’ x 2’6” ) GM-SR, PA-STAFF.2Each
61.05Providing & Fixing Toilet & pantry Door made out of 35mm thick block board, TW beading patti, door frame finished in plywood, frame and door all laminate finished, French polished with brass hinges, mortise lock, baby latches, door closer, aluminum louvers in the bottom of the door for ventilation, complete. (7’ x 2’3”)3Each
71.06Providing & Fixing full height partition made out of aluminum section 50 x 35 mm both side 9 mm thick plywood, laminate finished with glass wool filling packed in plastic sheets for Sound proofing in between the aluminum frames, French polished in grooves etc., complete for M.D. cabin120Sq.Ft.
81.07Providing & Fixing cabin door made out of aluminum section 50 x 35 mm both side 9 mm thick plywood, with TW frame along the partition, TW beading, laminate finished with glass wool filling packed in plastic sheets for Sound proofing in between the aluminum frames, French polished with hinges, mortise lock, door closer, complete for PA to M.D. cabin.(7’ x 2’6”)1LS
91.08Providing & Fixing cabin door made out of aluminum section 50 x 35 mm both side 9 mm thick plywood, with TW frame along the partition, TW beading, laminate finished with glass wool filling packed in plastic sheets for Sound proofing in between the aluminum frames, French polished with hinges, mortise lock, door closer, complete for M.D. cabin. (7’ x 3’)1LS
101.09Providing & Fixing Book shelf cabinet made out of 19mm thick plywood with 6mm thick back ply with 6mm thick glass shutters with hinges, laminate finished, ball catch, handles, drawer channels, etc. French polished, complete for M.D. cabin. (3’ x 7’ x 1’3”) (Reference Drawing no.4)21Sq.Ft.
111.1Providing & Fixing Filing cabinet made out of 19mm thick plywood with 6mm thick back ply with 6mm thick glass shutters with hinges, laminate finished, ball catch, handles, drawer channels, etc. French polished, complete for M.D. cabin. (4’ x 7’ x 1’3”) (Reference Drawing no.4)35Sq.Ft.
121.11Providing & Fixing Filing cabinet made out of 19mm thick plywood with 6mm thick back ply with 6mm thick glass shutters with hinges, laminate finished, ball catch, handles, drawer channels, etc. French polished, complete for GM. cabin. (3’ 6” x 7’ x 1’3”) (Reference Drawing no.5)25Sq.Ft.
131.12Providing & Fixing side unit of executive table made out of 19mm thick plywood with 6mm thick back ply with 6mm thick glass shutters with hinges, laminate finished, ball catch, handles, drawer channels, etc. French polished, complete for GM. cabin. (3’ 3” x 2’ 6”) (Reference Drawing no.5)8Sq.Ft.
141.13Providing & Fixing new executive table top on existing base made out of 35mm thick block board with TW beading, laminate top finished, French polished, complete for GM. cabin. (3’x 7’)1Sq.Ft.
151.14Providing & Fixing full height partition made out of aluminum section 50 x 35 mm both side 9 mm thick plywood, laminate finished, French polished in grooves etc., complete.550Sq.Ft.
161.15Providing & Fixing 4’ 0” height partition made out of aluminum section 50 x 35 mm both side 9 mm thick plywood, laminate finished, TW frame on open edge, French polished in grooves etc., complete.42Sq.Ft.
171.16Providing & Fixing work table made out of 19mm thick plywood with 6mm thick back ply with 6mm thick glass shutters with hinges, laminate finished, ball catch, handles, drawer channels, etc. French polished, complete for PA cabin. (5’3” x 2’) (Reference Drawing no.6)1Each
181.17Providing & Fixing filing cabinets over the work table made out of 19mm thick plywood, TW beading patti, laminate finished, with hinges, bal catch handle, etc. French polished, complete in PA cabin. (5’ 3” x 2’ 9”) (Reference Drawing no.6)15Sq.Ft.
191.18Providing & Fixing work table made out of 19mm thick plywood with hinges, TW beading patti, laminate finished, ball catch, handles, drawer channels, etc. French polished, complete for reception area. (3’ x 2’) (Reference Drawing no.7)2Each
201.19Providing & Fixing side unit of reception & staff table made out of 19mm thick plywood with 6mm thick back ply with 6mm thick glass shutters with hinges, laminate finished, ball catch, handles, etc. French polished, complete. (10’ x 2’ 6”) (Reference Drawing no.8)25Sq.Ft.
211.2Providing & Fixing filing cabinet side unit of reception & staff table made out of 19mm thick plywood with 6mm thick back ply with 6mm thick glass shutters with hinges, laminate finished, ball catch, handles, etc. French polished, complete. (10’ x 2’ 9”) (Reference Drawing no.8)27.5Sq.Ft.
221.21Providing & Fixing Filing cabinet made out of 19mm thick plywood with 6mm thick back ply with hinges, laminate finished, ball catch, handles, etc. French polished, complete in reception area (3’ 9” x 7’ x 1’3”) (Reference Drawing no.7)32Sq.Ft.
231.22Providing & Fixing staff work table made out of 19mm thick plywood with hinges, laminate finished, ball catch, handles, drawer channels, etc. French polished, complete in staff area. (4’ x 2’) (Reference Drawing no.9)5Each
241.23Providing & Fixing side unit of north side staff table made out of 19mm thick plywood with 6mm thick back ply with hinges, laminate finished, ball catch, handles, etc. French polished, complete. (14’ x 2’ 6” x 1’ 3”) (Reference Drawing no.10)35Sq.Ft.
251.24Providing & Fixing side unit of south side staff table made out of 19mm thick plywood with 6mm thick back ply with hinges, laminate finished, ball catch, handles, etc. French polished, complete. (9’ x 2’ 6” x 1’ 3”) (Reference Drawing no.11)22.5Sq.Ft.
261.25Providing & Fixing north side Filing cabinet made out of 19mm thick plywood with 6mm thick back ply with hinges, laminate finished, ball catch, handles, etc. French polished, complete in Staff area (14’ x 2’ 9” x 1’3”) (Reference Drawing no.10)38.5Sq.Ft.
271.26Providing & Fixing south side Filing cabinet made out of 19mm thick plywood with 6mm thick back ply with hinges, laminate finished, ball catch, handles, etc. French polished, complete in Staff area (9’ x 2’ 9” x 1’3”) (Reference Drawing no.11)24.75Sq.Ft.
281.27Providing & Fixing 19mm thick plywood shutters with TW frame and leaping patti, laminate finished with hinges, handles, ball catch etc., complete below the window for storage space.210Sq.Ft.
291.28Providing & Fixing cabinet for Server unit, EPABX etc. made out of 19mm thick plywood with 6mm thick back ply with hinges, laminate finished, ball catch, handles, drawer channels, etc. French polished, complete in reception area (8’ 6” x 8’6\" x 2’) (Reference Drawing no.12)72.25Sq.Ft.
301.29Providing and fixing name plate in Stainless Steel outside main door with engraved in black the name of the company.1L.S.
311.3Providing & Fixing 19mm thick plywood shutters with TW frame and leaping patti, laminate finished with hinges, handles, ball catch, SS rods drawers, drawer channel etc., complete below the pantry platform counter. (2’ 8” x 4’) (Reference Drawing no.13)8Sq.Ft.
321.31Providing and fixing storage cabinet above pantry platform made out of 19mm thick plywood with 6mm thick back plywood with hinges, ball catch, handle etc., complete. (2’ 3” x 2’ 9”) (Reference Drawing no.13)10Sq.Ft.
332PANTRY Providing & Fixing Pantry platform with SS Sink in marble, cudappa and black granite top, inside glased tile finished, complete with edge polished.4R.Ft.
342.01Providing & Fixing new 5” thick brick wall in sand & cement mortar in line & level.45Sq.Ft.
352.03Providing & applying minimum ¾” thick cement plaster in CM 1:4 to the wall finished in line & level and to be cured for 3 days.60Sq.Ft.
362.04Providing & Fixing wall tiles with 12mm thick CM 1:3 in line and level. (Basic cost Rs.120 tiles/sq. ft.)105Sq.Ft.
372.05Providing & Fixing Floor tiles in cement mortar & river sand bedding (Basin Cost Rs.120 tiles/sq. ft.)20Sq.Ft.
382.06Granite Shelf both side polished and edge polished for Microwave to be fixed in the wall.3Sq.Ft.
392.07Providing & fixing concealed CPVC Atral flowgard plus SDR11 ½” pipe line plumbing for kitchen sink, water filter and Astral ultradrain “B” Class pipes pipes for kitchen drainage.1L.S.
402.08Providing and fixing kitchen waste coupling, kitchen long nose cock, angle cock of Jaquar make quarter turn model.1L.S.
412.09Exhaust Fan1Each
423TOILETS BOD AND MD Breaking existing wall without damaging the structure and carting away the debris from site.40Sq.Ft.
433.01Breaking existing Floor tiles without damaging the structure and carting away the debris from site.80Sq.Ft.
443.02Breaking existing wall tiles without damaging the structure and carting away the debris from site.350Sq.Ft.
453.03Breaking the floor brick bat coba without damaging the structure and carting away the debris from site.65Sq.Ft.
463.04Providing and laying the water proofing base coat of Sunanda Chemicals Polyalk WP as per the company specifications on the RCC floor up to 2 feet on the wall.65Sq.Ft.
473.05Providing and laying New Brick bat coba 8 to 10” thick with waterproofing Sunanda make chemicals and water ponding for 4 days to check for any leakages.65Sq.Ft.
483.06Providing & Fixing new 5” thick brick wall in sand & cement mortar in line & level.75Sq.Ft.
493.07Providing & applying minimum ¾” thick cement plaster in CM 1:4 to the wall finished in line & level and to be cured for 3 days.150Sq.Ft.
503.08Providing & Fixing Floor tiles in cement mortar & river sand bedding (Basin Cost Rs.120 tiles/sq. ft.)60Sq.Ft.
513.09Providing & Fixing Floor tiles in cement mortar & river sand bedding (Basin Cost Rs.120 tiles/sq. ft.)340Sq.Ft.
523.1Providing & fixing concealed water supply CPVC Atral flowgard plus SDR11 ½” pipe line plumbing for wash basin, cistern, health faucet and Astral ultradrain “B” Class pipes pipes for wash basin, nahni & WC, complete.2Each
533.11Providing & Fixing Wash basin counter in marble and black granite top with edge polished (1’9” x 2’9”)2Each
543.12Providing and fixing Jaquar make quarter turn faucets Angle cocks, health faucet, bib cock, basin pillar cock, waste coupling, bottle trap, nahni trap etc., complete.1Nos.
553.13Counter top basin Hindware make or equivalent2Nos.
563.14Wall hanging WC and PVC low level cistern Hindware make or equivalent2Nos.
573.15Providing and fixing, towel rod, soap dish, hook, toilet paper holder, soap dispenser.1L.S.
583.16Providing and fixing exhaust fan.1Each
593.17Providing and fixing aluminum friction hinges openable aluminum Jindal make window in frosted glass with marble and granite frame on the external wall, finished complete.1Each
603.18Providing and fixing 3’ x 2’ modiguard Mirror with PVC back tape and on brass fitting.2Each
613.19Providing and fixing GI duct with Exhaust fan from BOD toilet to the external wall, complete.1L.S.
624STORE ROOM Providing & Fixing filing cabinets in 19mm thick plywood, 6mm thick back plywood with hinges, handles, ball catch, laminate finished and French polished complete. (Reference Drawing no.14)161Sq.Ft.
635GENERAL Providing and Fixing Stylex make or equivalent make vinyl flooring over the existing flooring, complete with skirting on wall.1200Sq.Ft.
645.01Providing and Fixing Gysum board false ceiling, with 20 guage GI fittings, complete with making of light fixtures and fan holes in the Ceiling.1400Sq.Ft.
655.02Providing and applying P.O.P On Wall in line and level.1500Sq.Ft.
665.03Providing and making Electrical Points in 1.5 sq. mm. polycab fireproof wires for electrical fittings.100Nos.
675.04Providing and fixing Beluga make or equivalent Led Lights 22 W in the ceiling.40Nos.
685.05Providing and fixing Havells make 390 SS model white pearl finish 1200 mm Fans.8Nos.
695.06Providing & fixing Le-Grand M.D.B Box with MCB’s, ELCB, complete.2Nos.
705.07Providing and Fixing10 Sq. MM main circuit Polycab armoured cable or equivalent from meter room to MDB1R MT
715.08Providing and Fixing Polycab fireproof wires 4 Sq. MM Electric circuit for Air conditioners.68R MT
725.09Providing and Fixing Polycab fireproof wires 2.5 Sq. MM Electric circuit for Electric junction switch boards.90R Mt
735.1Providing and Fixing Internal Cat 6 Polycab make or equivalent make Cables from Server unit to the various points marked.125Points
745.11Providing and Fixing Polycab Telephone Cables 5 pairs for Internal Telephone/EPABX connections from junction to various points marked.110R Mt
755.12Providing and Fixing Polycab cat 6 cable from indoor junction to outside Building main junction.1R MT
765.13Providing and Fixing Polycab cat 11 or equivalent make cable from Indoor Junction to Building main junction.1R Mt
775.14Providing and Fixing Polycab or equivalent 10 pair cables from Indoor Junction to Building main junction.1R Mt
785.15Providing and Fixing Jindal or equivalent Aluminum sliding Window of 1” Series heavy gauge with window frame boxing with plywood and inside laminate finish, complete as shown in the plan for each area.180Sq.Ft.
795.16Providing and Fixing Trendy UPVC openable/sliding window Sound proof double glazed Window for G.M. cabin50Sq.Ft.
805.17Providing and Fixing Marvel make or equivalent make Roller blinds for Windows.300Sq.Ft.
815.18Providing and Fixing Norysis Make Switches, sockets, boxes, plates etc.1L.S.
825.19Providing and applying Asain Make Royal paint on walls and ceiling with 1 coat of primer, 3 coats of paint, 2 coats of putty, sanding and complete with smooth surface.4000Sq.Ft.
835.2Removing the existing furniture/wiring/windows etc. and disposing from site.1L.S.
846AC Removing & Re-fixing existing AC’s from old office at Khetan Bhavan, Churchgate, servicing, fixing new copper piping, drainage pipes, core cutting if required, MS brakets (serviceable) for outdoor units, fixing installation, gas charging if required, complete.5Each
856.01Providing and making alterations in the existing grill to make openable and lockable for servicing AC and fire escape, enamel painted and complete.1L.S.

AI Tender Summary

OUR REF NO 21415406
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 29-08-2019
Authority
Authority Name Maharashtra State Oil Seeds Commercial And Industrial Corporation Limited
Work Description Tender For Office Interior Works
Basic Detail
Tender No Office Interior Works
Bidding Type Tender
Location
City MUMBAI
State Maharashtra
Key Dates
Publish Date 16 Aug 2019
Submission Date 29 Aug 2019
Open Date 30 Aug 2019
Finance
Tender Value Ref. Documents
Tender Fee 5900
EMD 1 Lakhs
Exemption Not Available
Document List
CED8B050-A99A-4804-81A7-FBE79FC843B0.html
TENDERDOC.pdf
BOQ_832620.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 16, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 29, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 30, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

CED8B050-A99A-4804-81A7-FBE79FC843B0.html

pdf

TENDERDOC.pdf

xls

BOQ_832620.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders