| 1 | 1 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/ blankets, any thickness including cover fillets complete all as specified and as directed by Engr-in-charge. | | 271 | sqm |
|---|
| 2 | 2 | Supply and fix anodised aluminium (powder coated) snap grid frame work for false ceiling the size of grid not more than 605x605mm suspended with hangers 6mm dia G.I. (1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40X3mm size 60mm long complete all as specified and as directed by Engr-in-charge. | | 21 | Sqm |
|---|
| 3 | 3 | Material and labour for perforated particle board/ tiles 12mm thickness white/ colour as per requirement for insulation and accoustic purposes, 600X600mm in size, fixed with staples on snap grid as in ceiling flat or sloping complete all as specified and as directed by Engr-in-charge. | | 21 | Sqm |
|---|
| 4 | 4 | Material and labour for french polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on new works with two or more coats complete all as specified and as directed by Engr-in-charge. | | 21 | sqm |
|---|
| 5 | 5 | Supply and fix anodised aluminium powder coated snap grid frame work not more than 605x605mm size for false ceiling with 6mm dia GI upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and laying including PVC laminated mineral fibre false ceiling board of Vinyl finish approved materials of size not more than 600x600x9mm thick fixed in ceiling, flat or sloping complete all as specified and as directed by Engr-in-charge. | | 250 | sqm |
|---|
| 6 | 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish removed outside the defence land complete all as specified and as directed by Engr-in-charge. | | 93 | Sqm |
|---|
| 7 | 7 | Material and labour for vertified ceramic tiles10mm thick (light shade) joint free square/ rectangular polished area of each tiles not exc 0.36 sqm in floor surfaces as skirting, dados, set and jointed in neat cement slurry @ 3.00Kg /sqm and pointed in white or coloured cement to match the surface and including 15mm thick screed bedding in cement mortar 1:6 for laying floor finishes smooth complete all as specified and as directed by Engr-in-charge. | | 55 | Sqm |
|---|
| 8 | 8 | Material and labour for coloured glazed ceramic wall tiles 450x350x7mm thick on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge. | | 38 | Sqm |
|---|
| 9 | 9 | Taking down chowkats or frames exc 1.50 sqm but not exc 4.00 sqm each with shutters (without taking off shutters from the frames) and removing from site, making good the dismantled portion in PCC 1:2:4 complete all as specified and as directed by Engr-in-charge. | | 2 | Each |
|---|
| 10 | 10 | Taking down chowkats or frames not exc 1.50 sqm each with shutters (without taking off shutters from the frames) and removing from site, making good the dismantled portion in PCC 1:2:4 complete all as specified and as directed by Engr-in-charge. | | 1 | Each |
|---|
| 11 | 11 | Supply and fix aluminium anodised powder coated door shutter approved make in single or double leaf with frames size 83x38x1.5mm thick including 5.5mm thick plain glass in half portion and 12mm thick prelaminated particle board exterior grade, one side with decorative choice and other side balancing (both side white laminated), standard rubber gasket, powder coated aluminium beadings, disc type handles two Nos, door stopper, door closer hydraulically regulated for each shutters and one mortice lock and joining cleat, 100mm hinges etc., complete all as specified and as directed by Engr-in-charge.\nNote: Door closer hydraulically regulated and mortice lock shall be measured and paid separately under respective items. | | 2.8 | Sqm |
|---|
| 12 | 12 | Supply and fix two track powder coated anodized aluminium window frame with sliding shutters with following specifications:- (a) windows frame of section 75x25.40x1.25mm @ 0.676 kg/RM\n(b) window shutter of aluminium weighing not less than 0.55kg/RM\n(c) two nos of glazed shutters with 5.50mm thick plain glass fixing with standard rubber gasket.\n(d) Aluminium beadings as per requirement as in fixing for glass and wire mess joining cleats and including handles locking arrangements etc., complete all as specified and as directed by Engr-in-charge. | | 0.85 | Sqm |
|---|
| 13 | 13 | Supply and fix door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc., complete all as specified and as directed by Engr-in-charge. | | 1 | Each |
|---|
| 14 | 14 | Supply and fix 100mm size mortice lock with two lever (vertical type) brass body and fixed complete all as specified and as directed by Engr-in-charge. | | 1 | Each |
|---|
| 15 | 15 | Supply and fix factory made solid PVC moulded with particle board core door shutters 28 to 30mm thick (stile), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face complete all as specified and as directed by Engr-in-charge. | | 2 | Sqm |
|---|
| 16 | 16 | Supply and fix 125mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed by Engr-in-charge. | | 3 | Each |
|---|
| 17 | 17 | Supply and fix 150mm aluminium handle, cast type, anodised and fixed complete all as specified and as directed by Engr-in-charge. | | 2 | Each |
|---|
| 18 | 18 | Supply and fix 150mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-charge. | | 2 | Each |
|---|
| 19 | 19 | Supply and fix aluminium alloy, anodised, sliding door bolt of size 300mm with hasp, staple (bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed by Engr-in-charge. | | 1 | Each |
|---|
| 20 | 20 | Material and labour for preparation of old painted surface of wood or wood based surfaces of any description not otherwise described, over 10cm in width or girth, and applying one of synthetic enamel paint (first quality) complete all as specified and as directed by Engr-in-charge. | | 50 | Sqm |
|---|
| 21 | 21 | Material and labour for preparation of old painted steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint complete all as specified and as directed by Engr-in-charge. | | 30 | Sqm |
|---|
| 22 | 22 | Taking down cement plaster from brick /concrete surfaces including racking out joints, hacking for key and scrubbing down with water etc., complete all as specified and as directed by Engr-in-charge. | | 90 | Sqm |
|---|
| 23 | 23 | Material and labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. | | 90 | Sqm |
|---|
| 24 | 24 | Material and labour for roller application of two coats of oil emulsion distemper on newly plaster wall surfaces including applying with 3mm thick birla/ JK putty over a coat of primer of surfaces complete all as specified and as directed by Engr-in-charge. | | 90 | Sqm |
|---|
| 25 | 25 | Material and labour for complete removal of existing treatment on old decorated plastered or unplastered surface walls by scrapping with steel wire brush, washing and cleaning and applying two coats of oil emulsion distemper a layer of wall care putty minimum 2-3mm thick, at any height of building/ tower complete all as specified and as directed by Engr-in-charge. | | 475 | Sqm |
|---|
| 26 | 26 | Material and labour for 18/ 19mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed in pelmet boxes or in narrow width not exc 15cms each rebated or flat edged fixed with screws to timber frame work complete all as specified and as directed by Engr-in-charge. | | 0.27 | sqm |
|---|
| 27 | 27 | Material and labour for venetion blind (vertical blind) of fibre strips 100mm wide of superior quality fixed to powder coated aluminium channel with sliding arrangements, pulling arrangements aluminium bracket fixed to wall with rowl play complete all as specified and as directed by Engr-in-charge. | | 1.44 | sqm |
|---|
| 28 | 28 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/ steel frames glazed with putty or fixed with beads complete all as specified and as directed by Engr-in-charge. | | 5 | Sqm |
|---|
| 29 | 29 | Supply and fix 4mm thick sheet glass selected quality on one side fixed in door/ windows, not exc 0.5 sqm in each pane fixed with stainless steel screws, beads/ glazing with oil putty etc., complete all as specified and as directed by Engr-in-charge. | | 3 | sqm |
|---|
| 30 | 30 | All as per item No.29 here-in-before but for obscured or frosted, on one side. | | 2 | sqm |
|---|
| 31 | 31 | Taking down copper /aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc., removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per site condition) and making good disturbed surfaces of wall, floors, etc., complete all as specified and as directed by Engr-in-charge. | | 24 | per point |
|---|
| 32 | 32 | Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed multi stranded copper conductor drawn into including PVC conduit concealed in wall /roof /ceiling etc., and conduit of size not less than 20mm dia and provision of 1.5 sqmm single core PVC insulated unsheathed multi stranded copper conductor as earth wire and cast iron/ pressed steel terminal boxes for mounting switches, sockets, fan regulator etc., with 3mm thick plastic laminated sheet cover for the following complete all as specified and as directed by Engr-in-charge.\nNote: 1. Cutting/ chasing shall be measured and paid under the respective item of the schedule.\n2. One run of PVC conduit and three runs of 1.5 sqmm, single core, PVC insulated, unsheathed FRLS cable, 1100 volts grade, multistranded with copper conductor shall be measured and paid as one length. | | | |
|---|
| 33 | 32.01 | One light point controlled by one switch. | | 16 | Point |
|---|
| 34 | 32.02 | One fan point controlled by one switch and one regulator. | | 5 | Point |
|---|
| 35 | 32.03 | One 3 pin socket outlet 5 Amps on independent board. | | 5 | Point |
|---|
| 36 | 33 | All as per item No.32 here-in-before but one 3 pin socket outlet 5/ 15 Amps, indipendent board with cables 4.0 sqmm size. | | 3 | Point |
|---|
| 37 | 34 | Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed multi stranded copper conductor drawn into including PVC conduit concealed in wall/ roof/ ceiling etc., and conduit of size not less than 20mm dia and provision of 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor as earth wire and cast iron/ pressed steel terminal boxes for mounting switches, sockets, fan regulator etc., with 3mm thick plastic laminated sheet cover for the following complete all as specified and as directed by Engr-in-charge.\nNote: 1. Cutting/ chasing shall be measured and paid under the respective item of the schedule.\n2. One run of PVC conduit and three runs of 1.5 sqmm, single core, PVC insulated, unsheathed FRLS cable, 1100V grade, multistranded with copper conductor shall be measured and paid as one length. | | | |
|---|
| 38 | 34.01 | One 3 pin socket outlet 5 Amps, independent board with cables 1.5 sqmm size. | | 5 | Point |
|---|
| 39 | 35 | All as per item No.34 here-in-before but one 3 pin socket outlet 5/ 15 Amps, independent board with cables 4 sqmm size. | | 5 | Point |
|---|
| 40 | 36 | Supply and fix switch piano type flush button single pole one way 240 V 5/6 Amps complete all as specified and as directed by Engr-in-charge. | | 16 | Each |
|---|
| 41 | 37 | Supply and fix switch socket combination 2 in 1, 3 pin, 5 Amps flush type complete all as specified and as directed by Engr-in-charge. | | 10 | Each |
|---|
| 42 | 38 | Supply and fix switch socket combination 3 pin, 6/16 A, flush type complete all as specified and as directed by Engr-in-charge. | | 8 | Each |
|---|
| 43 | 39 | Supply and fix ceiling rose surface bakelite 65x50mm, 2 to 3 terminals complete all as specified and as directed by Engr-in-charge. | | 16 | Each |
|---|
| 44 | 40 | Taking down unserviceable sub main wiring of any size aluminium conductor along with earth wire of any sizes complete all as specified and as directed by Engr-in-charge. | | 40 | RM |
|---|
| 45 | 41 | Material and labour for submain wiring for along with earth wire with the PVC insulated, unsheathed FRLS cable, 1100 volts grade, multistranded with copper conductor, drawn through and including suitable size of PVC conduit pipe and accessories concealed in the wall/ roof etc., for the following sizes complete all as specified and as directed by Engr-in-charge. | | | |
|---|
| 46 | 41.01 | 3X16 sqmm for phase and neutral and 2X16 sqmm as earth wire. | | 40 | RM |
|---|
| 47 | 42 | Supply and fix high efficiency modern 34W, 2x2 sqft LED light with panel for recesssed dust free installation with high brightness LEDs for glare free homogenous illumination and suitable for ceilling cut out 600x600mm complete all as specified and as directed by Engr-in-charge.\nNote: Including taking down the existing unserviceable FTL fittings. | | 16 | Each |
|---|
| 48 | 43 | Supply and fix sheet metal enclosure vertical DB's 4 way double door in and including MCCB 100 A, 4 pole, 415V, 25 KA with spreader terminals, insulating phase barrier and hardware complete all as specified and as directed by Engr-in-charge.\nNote: (i) Including taking down old DB, MCCB and MCB's.\n(ii) MCB SP shall be measured and paid separetly under the respective item of the schedule. | | 2 | Each |
|---|
| 49 | 44 | Supply and fix MCB SP 6 to 32A, 240V, \"C\" series complete all as specified and as directed by Engr-in-charge. | | 24 | Each |
|---|
| 50 | 45 | Material and labour for cutting chases on brickwork concrete surfaces not exc 10cm girth and making good in cement mortar 1:3 the existing surface after carryiing out the concealed wiring including necessary finishes complete all as specified and as directed by Engr-in-charge. | | 25 | RM |
|---|
| 51 | 46 | Supply and fix return air ducting factory made out of commercial grade GI sheet zinc coating 120 grade, IS:277 and factory fabricated as per SMACNA-1995 standards and IS-655 required portion of duct shall be acoustically insulated with standard size of AC sheets, insulated with 25mm thick resin bonded fibre glass wool of densitiy 24Kg/ cum covered with factory laminated aluminium foil fixed with adhesive tape and finally cladded 24 SWG aluminium sheet and supported by internal channel and clamping wherever the ducting passes through un-conditioned space shall be insulated with 50mm thick resin bonded fibre glass wool of density 22 Kg/ cum and covered with GI chicken wire mesh and cladded with aluminium foil fixed with adhesive tape and finally cladded with 26 SWG aluminium sheet and supported by internal channel and clamping, wherever the ducting is exposed to sky shall be insulated with 50mm thick resin bonded fibre glass wool of density 2 Kg/ cum covered with polythene sheet faced hessian cloth, GI chicken wire mesh and cladded with sand cement plaster. Aluminium powder coated double deflection adjustable type supply air grills/ diffusers with MS volume control dampers and aluminium powder coated fixed bar type return air grills/ diffusers as required without volume control damper, for return air complete all as specified and as directed by Engr-in-charge.\nNote: Including taking down the old duct and handed over to MES store. | | 1 | Each job |
|---|