Housing Urban and Rular Development Government Departments Closing in 0 days TDR #21407964

Construction Of 30 Meter Span Class A Loading Single Lane Steel Girder Motor Bridge In Km 01 Of Rikholi Nail Jagri Sera Motor Road At Gairsain Block Distt Chamoli

Issued by Government Departments · Gairsain, Uttarakhand
Tender Value
2.02 Crore
Estimated cost
Bid Submission
11 Sep 2019
0 days left
EMD
3.90 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gairsain → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of 30 Meter Span Class A Loading Single Lane Steel Girder Motor Bridge In Km 01 Of Rikholi Nail Jagri Sera Motor Road At Gairsain Block Distt Chamoli

BOQ

Name of Work: Under CM announcement No. 336/2016 Construction of 30 Meter Span class A loading Single lane steel girder motor Bridge in Km 01 of Rikholi Nail Jagri Sera Motor road at Gairsain Block Disst Chamoli
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11\nEarth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Mechanical MeansUp to 3.0 M.408.79Cum
22\nEarth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Mechanical Means3.0 to 6.0 M.371.35Cum
33\nEarth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Mechanical MeansAbove 6.0 M.298.29Cum
44Plain cement concrete in open foundation complete as per drawing and technical specifications PCC Grade M1513.44Cum
55Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. RCC Grade M 30 Using Batching Plant, Transit Mixer and Concrete Pump Hight Above to 10 M.204.66Cum
66Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. RCC Grade M 30 Using Batching Plant, Transit Mixer and Concrete Pump Hight 5 to 10 M.131.62Cum
77Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications34.15MT
88Supplying, fitting and fixing in position true to line and level POT-PTFE bearing tonne consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved Technical Specifications (Including the Cost of Bearing Assembly)380MT
99Furnishing and Placing Reinforced cement concrete in super-structure as per drawing and Technical Specification RCC Grade M25 Using Concrete Mixer For solid slab super-structure35.62Cum
1010Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications4.07MT
1111Providing, fitting and fixing mild steel railing complete as per drawing and Technical Specification1581.57Kg
1212Supply and fabrication of steel truss bridge as per detailed drawing attached including supply of all structural steel confirming IS 2062 - 2011 required for proper completion of the bridge including ground errection of the bridge all T&P, nuts and bolts, washers and also including supply and fixing of shop rivets required as per drawing, required equipment shall be arranged by the contractor at his own cost which shall be taken back by the contractor after satisfactory execution of the job, the rates shall include ground errection in the workshop and its dismentling after inspection, approval and removing defects, match marking of all parts, numbering and proper stacking in the premises of workshop before cartage to site of work. The work shall be executed in accordance to IS - 1915. The rates shall include cost of all material, its wastage, cutting, bending if required, welding, making holes, shop riveting, labour, T&P etc. required for proper completion of the work. including cost of cartage from workshop to Bridge Site including safe stacking of parts.36.68MT
1313Erection of Steel Truss (Girder) Bridge (up to 60m span) as per drawing with required camber including cartage of fabricated parts from the place of stack near site including submission of launching plan by the contractor, (duly vetted by a recognised reputable institution/ consultant if required) and approved by the engineer-in-charge. Service bolts to used shall be of approved make. The rate including of cost of all labour, T&P, equipments, civil work and consumables, cost of arranging, fabricating, errecting and dismantling of erection scheme including the cost of its designing, revising, supervision by contractor's designeer at site during erection, also including cost of all safety measures and necessary insurances of bridge and labours for proper completion of the work as per MORTH specification no. 1905 with due regard of mansoon and as per directions of the engineer-incharge.36.68MT
1414Drainage Spouts complete as per drawing and Technical specification12No.
1515Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications8.12Cum
1616PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification7.82Cum
1717Reinforced cement concrete (M-30) approach slab including formwork but excluding reinforcement steel, complete as per drawing and Technical specification15.65Cum
1818Providing and laying of strip seal expansion joint catering to maximum horizontal movement upto 70 mm ( complete as per approved drawings and standard specifications ) to be installed by the manufacturer / supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation14.9Rm
1919Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications107.8Rm
2020Painting on Steel Surfaces \nProviding and applying two coats of readymix paint of approved brand on steel suface after through cleaning of surface to give an even.1039.28Sqm
2121Supply and Fixing of 20 mm dia P.F. make 10.90 grade HSFG High Strength Friction Grip Bolt to IS 3757:1985 latest to grade 10.9S with High Strength Friction Grip nut to IS 6623:2004 latest to grade 10S and high Strength Friction 2 No. washer including cost of all material, Labour, Fixing at site, all taxes, T&P etc required foe Proper completion of the work (22 X 100mm)2894No.
2222Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification.188.91Cum
2323Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification Granular material383.08Cum
2424Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material Mechanical Means Depth upto 3 m114Cum
2525Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction689Cum

AI Tender Summary

OUR REF NO 21407964
AUTHORITY Government Departments
TENDER VALUE 2.02 Crore
LAST DATE 11-09-2019
Authority
Authority Name Public Works Department
Work Description Construction Of 30 Meter Span Class A Loading Single Lane Steel Girder Motor Bridge In Km 01 Of Rikholi Nail Jagri Sera Motor Road At Gairsain Block Distt Chamoli
Basic Detail
Tender No 3401/34 yata-07/2019 Dated 01.08.2019
Bidding Type Tender
Location
City Gairsain
State Uttarakhand
Key Dates
Publish Date 14 Aug 2019
Submission Date 11 Sep 2019
Open Date 11 Sep 2019
Finance
Tender Value 2.02 Crore
Tender Fee 5900
EMD 3.90 Lakhs
Exemption Not Available
Document List
Tendernotice_2.pdf
Technical_Bid.pdf
A155021E-5A66-4563-85CD-F807BD3655EB.html
Tendernotice_1.pdf
BOQ_23471.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 14, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 11, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 11, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_2.pdf

pdf

Technical_Bid.pdf

html

A155021E-5A66-4563-85CD-F807BD3655EB.html

pdf

Tendernotice_1.pdf

xls

BOQ_23471.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender