Tender For Repairs To Buildings Of 661 Army Avn ( R And O ) , 4 Guards , Cwe Office , Ge ( West ) Jrc , Age E/M ( West ) , 4011 Fd Hosp , Vajra Canteen Of Age B/R-Ii Under Ge ( West ) Jalandhar Cantt As Described In Bill Of Quantities
Tender Value
28 Lakhs
Estimated cost
Bid Submission
31 Aug 2019
0 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar Cantt → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Bldgs Of 661 Army Avn ( R And O ) , 4 Guards , Cwe Office , Ge ( West ) Jrc , Age E / M ( West ) , 4011 Fd Hosp , Vajra Canteen Of Age B / R-Ii Under Ge ( West ) Jalandhar Cantt As Described In Bill Of Quantities
BOQ
| Name of Work : REPAIR TO BLDGS OF 661 ARMY AVN SQN (R&O), 4 GUARDS, CWE OFFICE, GE (WEST) JRC, AGE E/M (WEST), 4011 FD HOSP, VAJRA CANTEEN OF AGE B/R-II UNSER GE (WEST) JALANDHAR CANTT | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling asbestos cement (corrugated or semi corrugated sheets in roof coverings complete all as specified and directed. | 400 | Sqm | |
| 2 | 2 | Dismantling wall and ceiling board( fibre, pulp insulation etc) or insulation boards any thickness including cover fillets complete all as specified and as direced by the Engr-in-Charge. | 200 | Sqm | |
| 3 | 3 | Dismentling Timber scantling 40 sq.cm over in section in any description complete all as specified and directed. | 0.2 | Cum | |
| 4 | 4 | Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed. | 0.5 | Qtl | |
| 5 | 5 | S&F rolled MS joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary length i.e. within 20mm of the length indcated) using Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. | 550 | Kg | |
| 6 | 6 | Erection and fabrication only rolled MS joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary length i.e. within 20mm of the length indcated) using Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. | 350 | Kg | |
| 7 | 7 | Supply and fixing Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. | 200 | Sqm | |
| 8 | 8 | Supply and fixing Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. | 10 | Sqm | |
| 9 | 9 | M&L for 6mm thick asbestos cement fibre corrugated /semi corrugated sheets as in roof coverings fixed with L-type or J-type or cranked hook bolts complete all as specified and directed. | 150 | Sqm | |
| 10 | 10 | All as per item No 09 but except sheet complete all as specified and directed. | 50 | Sqm | |
| 11 | 11 | Supply & fixing asbestos cement one piece plain angular ridge 6mm thick in pair complete all as specified and directed. | 20 | RM | |
| 12 | 12 | S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primered self-embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and as directed. | 200 | Sqm | |
| 13 | 13 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (Without taking off shutters from the frames complete all as specified and directed. | 50 | Each | |
| 14 | 14 | Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (Without taking off shutters from the frames complete all as specified and directed. | 20 | Each | |
| 15 | 15 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed. | 10 | Each | |
| 16 | 16 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and refixing in same opening complete all as specified and directed. | 20 | Each | |
| 17 | 17 | S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. | 45 | RM | |
| 18 | 18 | S&F Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.\n | 13 | Sqm | |
| 19 | 19 | M&L for 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. | 30 | Sqm | |
| 20 | 20 | M&L for 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed. | 16 | Sqm | |
| 21 | 21 | S & F steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one verticle mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. \nNote: Wire mesh and painting shall be measured and paid separately under respective item of schedule. | 35 | Sqm | |
| 22 | 22 | Ditto all as per description ser item No- 21 but window with glazed shutters. \nNote : Glass pans and painting shall be measured & paid separately under respective item of schedule. | 35 | Sqm | |
| 23 | 23 | M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed. | 650 | Kg | |
| 24 | 24 | S&F mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified & directed. | 450 | Kg | |
| 25 | 25 | Supply & fixing powder coated aluminum frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed. | 150 | Kg | |
| 26 | 26 | Supply & fixing powder coated, any colour, aluminum door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. | 9 | Sqm | |
| 27 | 27 | Supply & fixing powder coated, any colour, aluminum window and ventilator shutters, (minimum thickness of powder coating 50 micron),side hung type without sash bars, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. | 20 | Sqm | |
| 28 | 28 | Supply & fixing galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed. | 20 | Sqm | |
| 29 | 29 | Supply and fixing 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. | 105 | Each | |
| 30 | 30 | S&F aluminium handle cast type anodised 150mm long complete all as specified and directed. | 90 | Each | |
| 31 | 31 | Supply & fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150mm overall length of cover plate complete all as specified and directed. | 20 | Each | |
| 32 | 32 | Supply and fixing 200mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. | 90 | Each | |
| 33 | 33 | Supply and fixing 75 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. | 20 | Each | |
| 34 | 34 | Supply and fixing 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed. | 25 | Each | |
| 35 | 35 | Supply and fixing in replacement aluminium (die cast body) door closer hydraulically regulated, designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed. | 5 | Each | |
| 36 | 36 | S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. | 10 | Each | |
| 37 | 37 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 142 | Sqm | |
| 38 | 38 | M & L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 110 | Sqm | |
| 39 | 39 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store complete all as specified and directed. | 550 | Sqm | |
| 40 | 40 | M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. | 1750 | Sqm | |
| 41 | 41 | M&L for glazed ceramic coloured tiles of size 450 x 300 x 7mm/ 300 x 200 x 7mm thick as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed. | 200 | Sqm | |
| 42 | 42 | M&L for joint free Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed. | 150 | Sqm | |
| 43 | 43 | M&L for joint free Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed. | 8 | Sqm | |
| 44 | 44 | M&L vitrified ceramic tiles 10mm thick, light shade, polished area of each tiles n. exc 0.36 Sqm (square / rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including rendering 15mm thick in cement mortar (1:6) finished rough to fix tiles complete all as specified and directed. | 100 | Sqm | |
| 45 | 45 | M&L vitrified ceramic tiles 10mm thick, light shade, polished area of each tiles n. exc 0.36 Sqm (square / rectangular) as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed. | 8 | Sqm | |
| 46 | 46 | M&L machine cut kota stone flooring 18 to 20 mm thick over 20mm thick cement screed beed in cement mortar 1:4, laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing complete all as specified and as directed. | 100 | Sqm | |
| 47 | 47 | M&L machine cut kota stone flooring 18 to 20 mm thick in riser of steps, skirting, dado and pillar laid over rendering 10mm thick in cement mortar 1:4, and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing complete all as specified and as directed. | 6 | Sqm | |
| 48 | 48 | M & L Marble work (black marble, Bhaislana Zebra)18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of marble shade including cutting and polishing complete all as specified and directed. | 5 | Sqm | |
| 49 | 49 | M&L for 75mm PVC (SWR) floor trap plain with grating incluidng jointing with solvent cement fixed in repairs complete all as specified and directed. | 20 | Each | |
| 50 | 50 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed. | 20 | Each | |
| 51 | 51 | S&F vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) fixed including provision of lime concrete bedding including breaking up of existing damaged WC seat and connecting flush pipe etc complete all as specified and directed by Engr-in-Charge.\n | 15 | Each | |
| 52 | 52 | S&F vitreous china wash hand basin, white, flat back 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including cast iron cantilever brackets and cutting for and pinning in ends of brackets complete all as specified and directed. | 10 | Each | |
| 53 | 53 | Supply and fixing in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete all as specified and directed. | 50 | Each | |
| 54 | 54 | S&F in repairs pillar tap, cast copper alloy chromium plated, with capston heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. | 15 | Each | |
| 55 | 55 | Supply & fixing in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed. | 20 | Each | |
| 56 | 56 | Supply and fixing in repair 32mm dia waste fittings, brass, chromium plated for basin with long screwd shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed. | 10 | Each | |
| 57 | 57 | S&F stop valves 15mm bore, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down with high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, fixed in repairs, complete all as specified and directed. | 20 | Each | |
| 58 | 58 | S&F in repair 32mm dia waste coupling of PTMT (half or full threaded), (minimum weight 45 gms) complete all as specified and directed. | 20 | Each | |
| 59 | 59 | S&F 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed. | 20 | Each | |
| 60 | 60 | Supply and fixing in repairs for 15mm dia of pipe bib taps, cast copper alloy fancy type and chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. | 40 | Each | |
| 61 | 61 | S&F in repair bib taps, cast copper alloy, with crutch or butterfly handles, long body, fancy type, chromium plated screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. | 22 | Each | |
| 62 | 62 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including plastic water closet seat cover white, closed pattern with flat bottom and including connection to drain or outgoing pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and directed. | 4 | Each | |
| 63 | 63 | Supply & fixing in repairs brass chromium plated jet/ health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge. | 10 | Each | |
| 64 | 64 | Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store complete all as specified and directed. | 120 | RM | |
| 65 | 65 | Taking up or down steel tubing 20mm bore and connection including cleaning for refixing or removal to store complete all as specified and directed. | 40 | RM | |
| 66 | 66 | M&L galvanised iron tubes 15mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed. | 120 | RM | |
| 67 | 67 | M&L galvanised iron tubes 20mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed. | 40 | RM | |
| 68 | 68 | Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth complete all as specified and directed. | 120 | RM | |
| 69 | 69 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality 5 mm thick glass mounted on 6 mm thick commercial plywood and fixed to wooden plug with chormimum plated brass screws and cup washers complete all as specified and directed. | 15 | Each | |
| 70 | 70 | S&F 125mm size chromium plated brass shower rose with swivel joints including arm for fixing with 15mm pipe complete fixed in repair complete all as specified and directed. | 10 | Each | |
| 71 | 71 | Taking down cement plaster of any description on brick or stone masonary, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed. | 650 | Sqm | |
| 72 | 72 | M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement complete all as specified and directed. | 300 | Sqm | |
| 73 | 73 | M & L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. | 300 | Sqm | |
| 74 | 74 | M&L rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed. | 50 | Sqm | |
| 75 | 75 | M & L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge. | 50 | Sqm | |
| 76 | 76 | M & L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed by Engr-in-Charge. | 300 | Sqm | |
| 77 | 77 | M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge. | 300 | Sqm | |
| 78 | 78 | M & L for preparation of old decorated surface of walls and applying one coats of white wash complete all as specified and as directed by Engr-in-Charge. | 200 | Sqm | |
| 79 | 79 | M & L for preparation of old decorated surface of walls and applying one coats of oil emulsion distemper complete all as specified and as directed by Engr-in-Charge. | 200 | Sqm | |
| 80 | 80 | M&L for preparation of old decorated surfaces of walls, including removing existing treatment washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of oil emulsion distemper complete all as specified & directed. | 50 | Sqm | |
| 81 | 81 | M&L preparation of old surface of wall by removing greasy spot and etc. and applying on coat of cement base paint on walls etc complete all as specified and as directed by Engineer-in-Charge. | 150 | Sqm | |
| 82 | 82 | M&L preparation of old decorated surface of ceiling applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge. | 70 | Sqm | |
| 83 | 83 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thick below or above ground level complete all as specified and directed. | 12.5 | Cum | |
| 84 | 84 | M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate), as in leveling concrete in floor finished concrete surface even & smooth without using extra cement complete all as specified & directed. | 50 | Sqm | |
| 85 | 85 | M & L for chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. | 50 | Sqm | |
| 86 | 86 | M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. | 3.75 | Cum | |
| 87 | 87 | M&L 80mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-40 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed.\nNote: Sand for sand cushioning shall be measured and paid for separately. | 150 | Sqm | |
| 88 | 88 | M & L for providing PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof curves, mud stopes, sunken floor rounded, coping, benching/ haunching, slightly rounded or chamfered angle and throating etc complete all as specified and directed. | 3.3 | Cum | |
| 89 | 89 | Demolition of brick work or stone/ boulder masonary built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed. | 6 | Cum | |
| 90 | 90 | M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed. | 6 | Cum | |
| 91 | 91 | M&L for hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed. | 12 | Sqm | |
| 92 | 92 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. | 32 | Sqm | |
| 93 | 93 | Taking up Asbestos cement pressure pipes, any class (including all fittings) 100 mm bore including disconnecting pipes and fittings complete all as specified and directed. | 50 | RM | |
| 94 | 94 | S&F for rotational moulded polye- thylene water storage tanks, 500 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, including dismantling of tank complete all as specified and directed. | 7 | Each | |
| 95 | 95 | S&F for rotational moulded polye- thylene water storage tanks, 1000 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, including dismantling of tank complete all as specified and directed. | 7 | Each | |
| 96 | 96 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. | 50 | RM | |
| 97 | 97 | Supply and fixing PVC (SWR) bends any radius of 110 mm bore complete all as specified and directed. | 8 | Each | |
| 98 | 98 | Supply and fixing PVC (SWR) vent cowl 110mm dia complete all as specified and directed. | 6 | Each | |
| 99 | 99 | Dismantling of brick tiles single layer as in roof covering all as specified and directed. | 800 | Sqm | |
| 100 | 100 | Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. | 48 | Cum | |
| 101 | 101 | M & L for PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) as in roof padding to top surface of slab in slope 1:40 complete all as specified and directed. | 34.4 | Cum | |
| 102 | 102 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application including applying evenly a tack coat of industrial bitumen 85/25 @ 1.25 Kg per Sqm over applying primer bitumen coat @0.30 kg per sqm including cleaning surfaces complete all as specified complete all as specified and directed. | 1400 | Sqm | |
| 103 | 103 | M&L for brick tile terracing with 40mm thick brick tiles laid on bedding layer of 15mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement mortar all as specified and directed. | 300 | Sqm | |
| 104 | 104 | All as per Ser item No 103 above but except brick tiles. | 500 | Sqm | |
| 105 | 105 | M&L for flush pointing to brick terracing tiles in cement mortar (1:3) complete all as specified and directed. | 80 | X Sqm | |
| 106 | 106 | M&L for rendering 15mm thick cement plaster in cement mortar (1:3) on fair faces of brick or concrete surfaces, mixed with water proofing compound in the proportion as recommended by the manufacturer, surfaces finished even and smooth without using extra cement all as specified and directed. (Water proof comound shall be measured and paid separately). | 600 | Sqm | |
| 107 | 107 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. | 210 | kg | |
| 108 | 108 | Demolition of Concrete concrete (unreinforced) of any description and in any position not otherwise specifically provided for sunken floor complete all as specified and directed. | 24.5 | Cum | |
| 109 | 109 | M&L for 50 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, laid in panels, concrete surfaces finished even & smooth without using extra cement complete all as specified & directed. | 80 | Sqm | |
| 110 | 110 | M&L for 50mm thick PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in alternate bays complete all as specified & directed. | 50 | Sqm | |
| 111 | 111 | M & L Cement concrete type E-2, 1:5:10 using 40mm graded aggregate in foundations filling and mass concrete as in sunken floor complete all as specified and directed. | 12 | Cum | |
| 112 | 112 | M&L for applying two coats of SHALIMAR SUPERCRETE/ NITOBOND water proofing coating on the entire surface of sunken portion complete all as specified and directed. | 60 | Sqm | |
| 113 | 113 | M&L for 25mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in sub floors, sub base; concrete surfaces finished even & fair to receive topping floor finish/layer all as specified & directed. | 60 | Sqm | |
| 114 | 114 | M&L for 15mm thick cement screed in cement mortar (1:3) with integral WPC FOSROC’s complast X 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC’s Nito bond AR cement slurry/ STP No 1 liquid @ 200 ml per bag complete all as specified and directed. | 60 | Sqm | |
| 115 | 115 | Supply & fixing 32mm dia G I pipe 450mm long beveled cut at both ends by making hole in walls sunken portion approx above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete all as specified and directed. | 10 | RM | |
| 116 | 116 | S&F in repair sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe complete all as specified and directed. | 10 | Each | |
| 117 | 117 | Supply and fixing in repairs Chromium plated grating 125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap complete all as specified and directed. | 10 | Each | |
| 118 | 118 | Supply and fixing in repair mild steel powder coated pelmet rods including 02 Nos of brackets complete all as specified and and directed. | 50 | RM | |
| 119 | 119 | S&F in repairs vitreous china bowl urinal, half stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, etc including fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed. | 10 | Each | |
| 120 | 120 | M&L for repairing of RCC projections, chajjas, roofs facia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70 mm including necessary form work and applying two coats of cement base paint of tint matching with the existing surfaces, work in building at any height as directed, complete all as specified.\nNote : 1. Welded mesh to be paid separately.\n2. The rate quoted by the contractor shall be included for scaffolding etc.\n3. Engineer-in-charge shall ensure to get the complete work executed against this term before submission of completion. | 100 | Sqm |
AI Tender Summary
Tender Timeline
Aug 14, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 02, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender