Indian Army-IA has published Provision Of Operational Stores. Submission Date for this Tender is 21-08-2019. Angle Tenders in Akhnoor Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Name of Work: Provision of Operational Stores (Job No-8943) | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1.01 | Concrete Block of size 0.30 x 0.20 x 0.15 mtr casted in mix design M15 having minimum compression strength of 121 kg/cm2 conforming to IS 2185-2005 | Item 1 | 10000 | Nos |
2 | 1.02 | Punched Tape Concertina Coil (including spike handle) with 50 turns and dia 1050 mm having a 2.6 mm dia core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are elecyrogalvanised to provide protection against outdoor exposure. The punched tape is machenically crimped over the cover wire and then formed in to a coil at various parts of the periphery of the coil steel clips connect the individual turns of the coil to each other so that it opens up like an accordion. The width of barbed as 9mm and spacing of clips 23.5 mm to 24.5 mm C/C. The weight of each coil will be 15.2 +5% Kgs without packing material and coil length 15 mtr when opened up. Each coil wowound with bituminised hession cloth for providing protection coating as per specification No IND/ENG/PROV/1245 is for raw material and drawing IMGA 0112/B (Sheet 01 of 02), IMPD-1821/B and IMPD-1822/B | Item 2 | 600 | Nos |
3 | 1.03 | Protective Wall Cage.Protective Wall Cage made of 8mm steel TOR (Make :- SAIL TMT/ JINDAL TMT/ TATA TMT) one coat of red oxide primer as per IS 2062-1999 with specification of weight Kg/M being not less than 0.395 Kg. The basket will be size as under :- \n(a) Length - 90 cm\n (b) Width - 60cm\n (c) Height - 75cm \n The mesh will be of a dimension 15cm x 15cm with all four corners of basket hinged with rings made of 10mm TOR, dia 1.25 inch with a total of 20 Rings (5 Nos each corner). Each wall cage to have 04 Nos of clamps. Clamps should consist of two Nos of MS plate of size (LxBxC) 100mm x 40mm x 4mm with 2 Nos of holes as mentioned in drawing, 2 Nos of 50mm x 8mm full threading nut and bolts as shown in the drawing be provided with the each clamp alongwith the washer with each nut bolt. One coat of red oxide primer to be applied to entire cage surface.\n | Item 3 | 500 | Nos |
4 | 1.04 | A' (Revised) picket of size 75mmx75mm x6m angle 4.215m long measured along the internal dimension incl V swan nech with min weight of 28.662 kgs with tolerance +/- 5% with one coat of red oxide. Make TATA/Jindal/SAIL. | Item 4 | 156 | Nos |
5 | 1.05 | HDPE sand bags (UV proofed) barrel type double stitched at one end std quality with inside lamination size 840x360mm with suitable tying cord as per IS 14252-1995 and weight of each bag not less than 85 gm colour Khaki. | Item 5 | 25000 | Nos |
6 | Total in Figures |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail