Rajasthan State Road Development And Construction Corporation Limited has published Tender For 11 Kv And Sub Station Work For 03 Nos . Of Toll Plaza On Bali-Pindwara Road. Submission Date for this Tender is 22-08-2019. Substation Tenders in BALI-PINDWARA ROAD Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work : -11 KV Line & Sub station work for 3 Nos. Of toll plaza on Bali - Pindwara Road. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | Supply and erection of P.C.C./R.C.C. pole as per REC manual no 15/1979 conforming to IS: 2905/1966 including excavation of pit and back filling with stone aggregate/boulders and soil in 0.45m consolidating each deposited layer of 0.45m by ramming and watering etc complete in all respect. | 0.0001 | P.Cum | |
| 2 | 1.02 | 9.0 Mtr long (200 Kg ) as per Discom specification | 133 | Nos. | |
| 3 | 1.03 | Supply and erection of GI stay set as per Discom specification complete with long stay rod with anchor plate including stay clamps turn buckle and G.I stay wire tightened through strain insulator, in cement concrete 1:3:6 including excavation of pit-re-filling etc as reqd. | 0.0001 | P.Cum | |
| 4 | 1.04 | Stay set of dia 20mm,2.4m long stay rod and anchor plate 380x380x6.4mm | 70 | Nos. | |
| 5 | 1.05 | Supplying and drawing overhead steel core Aluminium conductor (ACSR) ISI marked(IS 398 part II-1996) on existing cross arms through insulator with all necessary T&P required including binding and twisting etc. complete in all respect as required as per Discom specification. | 0.0001 | P.Cum | |
| 6 | 1.06 | 30 Sqmm of (6+1) 2.59mm (Weasel) | 8190 | Mtr | |
| 7 | 1.07 | 50 Sqmm of (6+1) 3.35 mm (Rabbit) | 12300 | Mtr | |
| 8 | 1.08 | 50 Sqmm of (6+1) 3.35 mm (Insulated Rabbit) | 8000 | Mtr | |
| 9 | 1.09 | Supplying and drawing of XLPE insulated LT Aerial bunched Aluminium conductor cable confirming to IS 14255/1995 and IS 398 (Pt-4)/ 1994 on existing cross arms through I hook with all necessary T&P required including binding and twisting etc. complete in all respect as required as per Discom specification. | 0.0001 | P.Cum | |
| 10 | 1.1 | 1 X 25 sq. mm. + 1X25 sq. mm. (Bared) | 1000 | Mtr | |
| 11 | 1.11 | 3 X 50 sq. mm. + 1X35 sq. mm. (Bared) | 500 | Mtr | |
| 12 | 1.12 | Supply and fixing of 'V' type cross arms made of MS channel on the existing poles complete including all necessary nut and bolt etc with clamps as per Discom specification. | 0.0001 | P.Cum | |
| 13 | 1.13 | 11kV cross arms (75 x 40 x 6.8 kg/mtr) | 119 | Nos. | |
| 14 | 1.14 | Supply and fixing of top hamper on the existing pole complete including nut bolts etc as required. | 0.0001 | P.Cum | |
| 15 | 1.15 | Vertical type | 0.0001 | P.Cum | |
| 16 | 1.16 | 11 kV (.7m long) (65 x 65 x6mm angle) | 119 | Nos. | |
| 17 | 1.17 | Supply and fixing 11kV pin insulator( IS 731/ 1971) with minimum creepage distance of 300mm on existing bracket including all accessories like hot dipped GI spindle and nuts etc (as per specificationof Discom). | 372 | Nos. | |
| 18 | 1.18 | Supply and fixing 11kV Disc insulator (IS 731/ 1971) with minimum creepage distance of 300mm on existing bracket including all accessories like hot dipped GI spindle and nuts etc (as per specificationof Discom). | 0.0001 | P.Cum | |
| 19 | 1.19 | T & C type hardware 45 KN | 90 | Nos. | |
| 20 | 1.2 | T & C disc insulator 45 KN | 180 | Nos. | |
| 21 | 1.21 | Pipe Earthing as per IS:3043 with perforated 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300 mm and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance as required. | 6 | Nos. | |
| 22 | 1.22 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. | 0.0001 | P.Cum | |
| 23 | 1.23 | 32mm x6mm G.I. ( Hot Dipped ) Strip | 60 | Mtr. | |
| 24 | 1.24 | 8 SWG G.I. ( Hot Dipped ) Wire | 6730 | Mtr. | |
| 25 | 1.25 | Supply and fixing of following LT Supporting accessories with nut bolt & Clamps made out as per standard Discom's specifications. | 0.0001 | P.Cum | |
| 26 | 1.26 | LT cross arm 600 mm long with clamp | 30 | Nos. | |
| 27 | 1.27 | LT cross arm 1200 mm long with clamp | 60 | Nos. | |
| 28 | 1.28 | Suspension clamp with eye hook & Pole clamp | 45 | Nos. | |
| 29 | 1.29 | Supply and fixing of Cross arms made out from 100 x 50 x 5 mm MS channel complete in all respect as required including nuts and bolts and clamp as per Discom specification etc as required. | 0.0001 | P.Cum | |
| 30 | 1.3 | 2 x 1.3 m long | 3 | Nos. | |
| 31 | 1.31 | Supply and fixing of PG clamps on overhead lines/jumpers, made of aluminium alloy 4600 of IS 617-1994 (with latest amendment if any) with steel nut and bolts conforming to IS 1363-1992 & IS 1367/1979-80 (with latest amendments if any) all ferrous metal parts intended for outdoor use except those made of stainless steel shall be protected by hotdip galvanising in accordance with IS 2633-1986 complete in all respect as required for ACSR conductor. | 0.0001 | P.Cum | |
| 32 | 1.32 | Weasel/Rabbit | 96 | Nos. | |
| 33 | 1.33 | Supply and fixing double pole structure for 11/0.4 Kv substation as per Discom specification complete in all respect as required including nuts and bolts etc (excluding the cost of poles) made of MS channel of 4 nos 100 x 50 x 6mm and 4 nos 75 x 40 x 6mm and MS flat 50 x 6mm as per Discom specifications. | 4 | Nos. | |
| 34 | 1.34 | Providing and fixing of single pole mounted structure set for isolator as per Discom specification complete in all respect with nuts and bolts as required MS flat 50 x 6mm, MS angle 65 x 65 x6mm, MS channel 100 x 50 x 6mm. ( Excluding cost of pole ). | 3 | Nos. | |
| 35 | 1.35 | Supply and fixing of 11kV, 400 Amp 3pole, central pot rotating double break type isolator (IS:9921 part I toV) without earth blade operating mechanism with GI spring loaded reverse loop type fixed contact, solid hard drawn electolytic copper tubular moving contact with silver/ nickel plated at end points, 9 nos post insulator of 12 kV (IS:2554 & IS 5350 part III), hot dipped galvanising hard ware, nut, bolts etc complete in all respect as per specification of Discom.( Type tested by ERDA/CPRI.) | 4 | Nos. | |
| 36 | 1.36 | Supply and fixing of 1.6 mm thick MS 11 kV Danger plates as per specification of Discom on the existing poles complete in all respect as per Discom specification. | 8 | Nos. | |
| 37 | 1.37 | Supply and fixing 100 Amp, 11kV Horn gap fuse set IS 9385 on existing DP structure with 6 nos 24kV/22kV post insulator (IS:5350 part III), hot dipped hard ware,fuse wire of required size etc. complete in all respect as per specification given by Discom. (Type tested by ERDA/CPRI) | 4 | Nos. | |
| 38 | 1.38 | Supply and fixing of piller box made of 2 mm thick powder coated CRCA sheet of 415 volts 3 phase 4 wire triple pole and neutral type, complete in all respect as required. Including knife switch of 400 amp. rating , HRC fuses with copper one piece U contacts base, brass studs and nuts, copper busbar for main and interconnection, MS angle frame of 50 x 50 x 6 mm grouted with C.C. of M-10 grade to achieve the height of 1.5 feet above the road level suitable for four outgoing. | 4 | Nos. | |
| 39 | 1.39 | P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. Armoured | 0.0001 | P.Cum | |
| 40 | 1.4 | 185.0 Sq.mm 3.5 core | 150 | Mtr. | |
| 41 | 1.41 | 70.0 Sq.mm 3.5 core | 360 | Mtr. | |
| 42 | 1.42 | 10.0 Sq.mm 4 core | 100 | Mtr. | |
| 43 | 1.43 | 4.0 Sq.mm 2 core | 250 | Mtr. | |
| 44 | 1.44 | Supply and fixing of LT porcelain pin insulator as per IS 1445-1997 suitable for working voltage 1100 volts including all accessories like hot dip GI forged spindle of 260mm long and nuts etc as reqd as per Discom specification. | 0.0001 | P.Cum | |
| 45 | 1.45 | 105mm x 65mm | 60 | Nos. | |
| 46 | 1.46 | Supply and fixing of porcelain shackle insulator as per IS:1443 1979 suitable for working on 1100 volts including hot dipped GI accessories and heavy duty hardwares etc as required as per Discom specification. | 0.0001 | P.Cum | |
| 47 | 1.47 | 100mm x 110mm | 240 | Nos. | |
| 48 | 1.48 | P & Laying XLPE insulated IS:7098/II/85 of Group1 and approved make H.T.cable for working voltage 11 K.V.Earthed direct in ground including excavation of 30cmx100cm size trench, 25cm layer of river sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size. | 0.0001 | P.Cum | |
| 49 | 1.49 | 3 core 185.0 Sq.mm | 360 | Mtr. | |
| 50 | 1.5 | Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of Group1 and approved make suitable for XLPE insulated 11 KV / 33 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes . | 0.0001 | P.Cum | |
| 51 | 1.51 | 11 KV End Termination Kit Outdoor type 3 core 120/150/185/225 Sq.mm | 12 | Nos. | |
| 52 | 1.52 | S & Laying following size' B ' class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required | 0.0001 | P.Cum | |
| 53 | 1.53 | 100 mm dia. | 54 | Mtr. | |
| 54 | 1.54 | SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator). Interconnection between bus bar and switchgears / cable shall be rigidly supported and made out by flexible copper wires (up to 125 amp ) and by solid bus bar (>125 amp ). All joints / interconnections of copper bus bar shall be dully tinned. Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves. Earth and Neutral bus bar shall be half of the size of phase bus bar. | 12 | Sqm. | |
| 55 | 1.55 | Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. | 0.0001 | P.Cum | |
| 56 | 1.56 | Electrolytic grade Aluminium bus bar | 9 | Kg. | |
| 57 | 1.57 | SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required. Group-1. | 0.0001 | P.Cum | |
| 58 | 1.58 | With Thermal Magnetic release 160 Amp, 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu | 3 | Each | |
| 59 | 1.59 | Supply and installation of spike of M.S. rod 20mm dia 3.0mtr. long for earthing of (tower/pole) drive into earth by mechnical means sturcture connection the spike with cross arm top hamper PCC pole, lattics tower to earth etc. complete as per technical specification of DISCOM | 96 | Nos. | |
| 60 | 1.6 | P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia. | 0.0001 | P.Cum | |
| 61 | 1.61 | 120 / 103.5 mm | 200 | Mtr. | |
| 62 | 1.62 | 50 / 55 mm | 100 | Mtr. | |
| 63 | 1.63 | Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , Painting etc. as required. | 65 | Kg. | |
| 64 | 1.64 | Supply & Erection of lattice structure of height 12.8 mtr in alignment, including excavation of pit and Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement, river sand and 12 mm to 20 graded blast crusher broken in pit/ found cement plaster upto 0.50mtr. from top to bottom in 1:3:6 ratio and paint of tower of approved make two coat of red oxide paint and one coat of aluminium paint before installation and one coat of paint after irrection work completed as per technical specifications & drawing of DISCOM. | 39 | Nos. | |
| 65 | 1.65 | Supply and fixing M.S. channel (cut point) 100x50mm ISMC (9.5Kg. Per Mtr.) 2x1.8mtr. long with pilot patti 50x6mm thick necessary nuts and bolts etc. as per technical specification & drawing of DISCOM. | 14 | Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
