| 1 | 1 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for shafts, column footings or for laying cables/pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed. | | 500 | Cum |
|---|
| 2 | 2 | Returning filling in soil including spreading, leveling, watering and well ramming in layers not exc 25 cm thick, complete all as specified and directed. | | 445 | Cum |
|---|
| 3 | 3 | Removal of excavated surplus soil to distance not exc 50 Mtr and deposting where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed. | | 55 | Cum |
|---|
| 4 | 4.01 | Taking up or down steel water tubing and connections including cleaning serviceable pipe internally/externally for re-use, complete all as specified and directed for following bore of pipes: -\n20 mm bore | | 1300 | RM |
|---|
| 5 | 4.02 | 25mm bore | | 800 | RM |
|---|
| 6 | 4.03 | 40 mm bore | | 210 | RM |
|---|
| 7 | 4.04 | 50mm bore | | 300 | RM |
|---|
| 8 | 4.05 | 80mm bore | | 300 | RM |
|---|
| 9 | 4.06 | 100mm bore\n(Note for item 4.01 to 4.06: - Excavation and earth work shall be measured and paid separately) | | 190 | RM |
|---|
| 10 | 5.01 | Supply & laying/fixing steel water tubing, galvanised, medium grade with all fitting, laid in trenches or fixed to walls, ceilings or laid in floors, complete all as specified and directed of following bore of pipes: -\n20mm bore | | 1200 | RM |
|---|
| 11 | 5.02 | 25mm bore | | 700 | RM |
|---|
| 12 | 5.03 | 40 mm bore | | 180 | RM |
|---|
| 13 | 5.04 | 50mm bore | | 260 | RM |
|---|
| 14 | 5.05 | 80mm bore | | 260 | RM |
|---|
| 15 | 5.06 | 100mm bore | | 150 | RM |
|---|
| 16 | 6.01 | Laying only in trenches/fixing to wall/ceiling/floors old serviceable steel water tubing, galvanized, medium grade, with and including all new fittings in existing or new location, complete all as specified and directed for following the following bore of pipes: -\n20 mm bore | | 100 | RM |
|---|
| 17 | 6.02 | 25mm bore | | 100 | RM |
|---|
| 18 | 6.03 | 40 mm bore | | 30 | RM |
|---|
| 19 | 6.04 | 50mm bore | | 40 | RM |
|---|
| 20 | 6.05 | 80mm bore | | 40 | RM |
|---|
| 21 | 6.06 | 100mm bore\nNote for item 6.01 to 6.06: - Old serviceable pipes retrieved from taking down shall be refixed under this item with new GI fittings as required at site. Cost of new GI fittings shall be deemed included in the quoted rates. | | 40 | RM |
|---|
| 22 | 7.01 | Taking up cast iron water main(including all fittings), with spigot and socketed ends jointed with run lead joints including burning out lead of joints and collecting run lead for re-use, cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody in storeyard of AGE E/M and removing unserviceable pipe from site complete all as specified and directed for following bore pipes:-\n80 mm bore | | 220 | RM |
|---|
| 23 | 7.02 | 100 mm bore | | 230 | RM |
|---|
| 24 | 7.03 | 150 mm bore\n(Note :- Excavation and earth work shall be measured and paid separately) | | 140 | RM |
|---|
| 25 | 8.01 | Laying only in trenches old serviceable cast iron pipe any class with spigot and socketed ends, jointed with rubber tyton or run lead joints, complete all as specified and directed for following bore pipes:-\n80 mm bore | | 40 | RM |
|---|
| 26 | 8.02 | 100 mm bore | | 50 | RM |
|---|
| 27 | 8.03 | 150 mm bore\nNote for item 8.01 to 8.03: (i) Rubber tyton or run lead joints of pipes shall be measured and paid separately under respective items here-in-after.\n(ii) Cast iron fittings/specials shall be measured and paid separately under respective items here-in-after. | | 40 | RM |
|---|
| 28 | 9.01 | Supply, laying in trenches, under floor, under road, connecting, jointing and testing centrifugally cast (Spun) iron pressure pipe class LA, ISI marked, with socket and spigot ends conforming to IS 1536 of 2001, jointed with rubber tyton or run lead joints, complete all as specified and directed for following bore pipes:-\n80 mm bore | | 180 | RM |
|---|
| 29 | 9.02 | 100 mm bore | | 180 | RM |
|---|
| 30 | 9.03 | 150 mm bore\nNote for item 9.01 to 9.03: (i) Rubber tyton or run lead joints of pipes shall be measured and paid separately under respective items here-in-after.\n(ii) Cast iron fittings/specials shall be measured and paid separately under respective items here-in-after. | | 100 | RM |
|---|
| 31 | 10 | M&L for CI fittings spigot socketed and flanged pipe such as bends, tee pieces, 'Y' junction, cross collars caps and plugs of any type or radius upto 150mm bore pipe complete all as specified and directed. | | 180 | Kg |
|---|
| 32 | 11 | M & L for rubber gasket joint for 80 mm bore confirming to IS complete all as specified and directed. | | 37 | Each |
|---|
| 33 | 12 | M & L for rubber gasket joint for 100 mm bore confirming to IS complete all as specified and directed. | | 18 | Each |
|---|
| 34 | 13 | M & L for rubber gasket joint for 150 mm bore confirming to IS complete all as specified and directed. | | 12 | Each |
|---|
| 35 | 14.01 | Supply and fix for run lead joint for spigot and socketed pipes and fittings including allied jointing material i.e. spun yarn etc, complete all as specified and directed for following bore pipes:-\n80 mm bore | | 25 | Each |
|---|
| 36 | 14.02 | 100 mm bore | | 20 | Each |
|---|
| 37 | 14.03 | 150 mm bore | | 10 | Each |
|---|
| 38 | 15.01 | Supply and fix in repairs for Gun-metal, globe or gate valves, ISI marked with iron wheel head, screwed both ends for iron pipe and fixed of followig bore :-\n20 mm bore | | 137 | Each |
|---|
| 39 | 15.02 | 25mm dia | | 40 | Each |
|---|
| 40 | 15.03 | 40mm dia | | 4 | Each |
|---|
| 41 | 15.04 | 50mm dia | | 14 | Each |
|---|
| 42 | 16.01 | Taking down old unserviceable sluice valve and supply and installed, connecting and testing of sluice valve, class PN 1 double flanged with CI body wheel and stainless steel spindle non rising type, IS-14846 ISI marked including jointing materials such as rubber gasket, nut, bolt and washer etc complete all as specified and directed of the following sizes :-\n80mm dia | | 7 | Each |
|---|
| 43 | 16.02 | 100 mm bore | | 7 | Each |
|---|
| 44 | 16.03 | 150 mm bore | | 3 | Each |
|---|
| 45 | 17.01 | Taking down old unserviceable non return valve and supply and installed, connecting and testing of cast steel double flanged NRV swing check type, double flanged build , weld end bolted, cover designed as per BS-1868, pressure rating PN 1.6, complete all as specified and directed of the following sizes :-\n80mm dia | | 2 | Each |
|---|
| 46 | 17.02 | 100 mm bore | | 1 | Each |
|---|
| 47 | 18.01 | Taking down old unserviceable butterfly valves and supply and installed, connecting and testing of cast steel butterfly valves, ISI marked, lever type with stainless steel disc, class PN 1.6, suitable for cast iron pipe lines, complete all as specified and directed of the following sizes :-\n80mm dia | | 4 | Each |
|---|
| 48 | 18.02 | 100 mm bore | | 2 | Each |
|---|
| 49 | 18.03 | 150 mm bore | | 1 | Each |
|---|
| 50 | 19 | Material and labour for valve chamber of size 900 x 600 x 1000 mm with PCC (1:2:4) type B1 using 20 graded aggregate as in foundation 100 mm thick brick masonry one brick thick wall in CM (1:4) coping with PCC (1:2:4) type B1 50 mm thick, plastering internal and external walls upto 150 mm below GL in CM (1:4) , 50 mm x 50 mm x 6 mm thick angle iron frame for chamber cover fixed with the chamber using 4 Nos hold fasts made of 50 x 6 mm thick MS flat iron of suitable length, nild steel chamber cover 4 mm thick, brazed with 50 x 6 mm MS flats, fixed with handle made of 10 mm dia MS bar suitably welded of 200 mm length and locking arrangement two coat cement based painting on plastered surfaces and two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete for chamber complete all as specified and directed. | | 4 | Each Job |
|---|
| 51 | 20 | All as per item 19 herein before but size of valve chamber 450x450x600 mm, complete all as specified and directed. | | 4 | Each Job |
|---|
| 52 | 21 | Surface dressing not exceeding 15 Cm deep in soft/loose soil around pupm house buildings, complete all as specified and directed. | | 230 | Sqm |
|---|
