Military Engineer Services-MES has published Providing Of Stp At Dharamshala. Submission Date for this Tender is 22-08-2019. Sewage Treatment Plant Tenders in Dharamshala Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: PROVN OF STP AT DHARAMSHALA | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Lumpsum price worked out by the contractor for Building work as listed in Schedule 'A' Part-I.\n | 1 | Lump sum | |
| 2 | 2 | Lumpsum price worked out by the contractor for Internal water supply as listed in Schedule 'A' Part-II.\n | 1 | Lump sum | |
| 3 | 3 | Lumpsum price worked out by the contractor for Internal electric Supply as listed in Schedule 'A' Part-III.\n | 1 | Lump sum | |
| 4 | 4 | Lumpsum price worked out by the contractor for Plumbing work as listed in Schedule 'A' Part-IV.\n | 1 | Lump sum | |
| 5 | 5 | Lumpsum price worked out by the contractor for Site clerance as listed in Schedule 'A' Part-V.\n | 1 | Lump sum | |
| 6 | 6 | Lumpsum price worked out by the contractor for Protective work as listed in Schedule 'A' Part-VI.\n | 1 | Lump sum | |
| 7 | 7 | Lumpsum price worked out by the contractor for Road, Path & Culvert as listed in Schedule 'A' Part-VII.\n | 1 | Lump sum | |
| 8 | 8 | Lumpsum price worked out by the contractor for Sewage Disposal as listed in Schedule 'A' Part-VIII.\n | 1 | Lump sum | |
| 9 | 9 | Lumpsum price worked out by the contractor for Security fencing as listed in Schedule 'A' Part-IX.\n | 1 | Lump sum | |
| 10 | 10 | Lumpsum price worked out by the contractor for External Water Supply as listed in Schedule 'A' Part-X.\n | 1 | Lump sum | |
| 11 | 11 | Lumpsum price worked out by the contractor for External Electrification as listed in Schedule 'A' Part-XI.\n | 1 | Lump sum | |
| 12 | 12 | Lumpsum price worked out by the contractor for Demolition/dismantling as listed in Schedule 'A' Part-XII.\n | 1 | Lump sum | |
| 13 | 13 | Construction of brick masonary manhole MH-1 of size 75cm x 60cm (internal dimensions) and 80cm depth (overall dimensions) built in cement mortar 1:6, Plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and including PCC benching in 1:2:4 type (using 20mm graded crushed stone aggregate) with rendered smooth using extra cement,15mm thick plastering internally with cement mortar 1:4 and flush pointing externally as the work proceeds in same mortar complete including RCC manhole cover and earth work in any type of soil including removal to a distance not exceeding 50m complete all as shown on drawing No SMITCONE/CEPZ/STP-01/2018 Sht No 10 dated 01-05-2018 and as specified. | 39 | Each Job | |
| 14 | 14 | Construction of RCC manhole MH-2 with circular manhole cover 60cm dia built in M-25, of size 90cm dia and 145cm depth (internal dimensions), plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and including 15mm thick plastering internally with cement mortar 1:3, MS rungs, PCC benching in 1:2:4 type (using 20mm graded crushed stone aggregate) with rendered smooth using extra cement complete including RCC including RCC manhole cover and earth work in any type of soil including removal to a distance not exceeding 50m complete all as shown on drawing No SMITCONE/CEPZ/STP-01/2018 Sht No 10 dated 01-05-2018 and as specified. | 333 | Each | |
| 15 | 15 | Construction of RCC manhole MH-3 with circular manhole cover 60cm dia built in M-25, of size 120cm dia and 200cm depth (internal dimensions), plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and including 15mm thick plastering internally with cement mortar 1:3, MS rungs, PCC benching in 1:2:4 type (using 20mm graded crushed stone aggregate) with rendered smooth using extra cement complete including RCC including RCC manhole cover and earth work in any type of soil including removal to a distance not exceeding 50m complete all as shown on drawing No SMITCONE/CEPZ/STP-01/2018 Sht No 10 dated 01-05-2018 and as specified. | 31 | Each | |
| 16 | 16 | Construction of RCC manhole MH-4 with circular manhole cover 60cm dia built in M-25, of size 150cm dia and 280cm depth (internal dimensions), plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and including 15mm thick plastering internally with cement mortar 1:3, MS rungs, PCC benching in 1:2:4 type (using 20mm graded crushed stone aggregate) with rendered smooth using extra cement complete including RCC including RCC manhole cover and earth work in any type of soil including removal to a distance not exceeding 50m complete all as shown on drawing No SMITCONE/CEPZ/STP-01/2018 Sht No 10 dated 01-05-2018 and as specified. | 31 | Each | |
| 17 | 17 | Construction of RCC manhole MH-5 with circular manhole cover 60cm dia built in M-25, of size 180cm dia and 430cm depth (internal dimensions), plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and including 15mm thick plastering internally with cement mortar 1:3, MS rungs, PCC benching in 1:2:4 type (using 20mm graded crushed stone aggregate) with rendered smooth using extra cement complete including RCC including RCC manhole cover and earth work in any type of soil including removal to a distance not exceeding 50m complete all as shown on drawing No SMITCONE/CEPZ/STP-01/2018 Sht No 10 dated 01-05-2018 and as specified. | 16 | Each | |
| 18 | 18 | Double corrugated pipes (DWCPE (SN8) pipes 300mm (Outer dia) and 260mm (inner dia) laid in 150mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) bed bed complete all as specified and as directed. | 309 | RM | |
| 19 | 19 | Double corrugated pipes (DWCPE (SN8) pipes 200mm (Outer dia) and 175mm (inner dia) laid in 150mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) bed complete all as specified and as directed. | 3190 | RM | |
| 20 | 20 | Double corrugated pipes (DWCPE (SN8) pipes 180mm (Outer dia) and 163mm (inner dia) laid in 150mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) bed complete all as specified and as directed. | 9144 | RM | |
| 21 | 21 | Boring of holes under road, pavement hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4mpa working pressure for crossing of 150mm dia pipe (sewer line) complete all as specified and as directed. | 115 | RM | |
| 22 | 22 | Boring of holes under road, pavement hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 200mm dia suitable for 0.4mpa working pressure for crossing of 200mm dia pipe (sewer line) complete all as specified and as directed. | 120 | RM | |
| 23 | 23 | Boring of holes under road, pavement hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 250 dia suitable for 0.4mpa working pressure for crossing of 250mm dia pipe (sewer line) complete all as specified and as directed. | 25 | RM | |
| 24 | 24 | Cutting and threading to existing GI pipe line in position (two cut) for GI pipe line 20/25mm bore of pipe making branch connection with 20/25mm bore of GI pipe including fittings like socket, tee, nipple, union and bend of required degree etc., including excavation, earthwork and making good distrubed surface complete all as specified and as directed. \n | 3 | Each Job | |
| 25 | 25 | Supply and fixing stainless steel grade (SS-304) pipe 32 mm dia with all fittings and fixtures for provision of air grid laid in floors or fixed to wall, ceiling etc including necessary welding joints etc. complete all as specified and as directed. | 900 | Kg | |
| 26 | 26 | Supply and fixing stainless steel grade (SS-304) pipe 20 mm dia with all fittings and fixtures for provision of air grid laid in floors or fixed to wall, ceiling etc including necessary welding joints etc. complete all as specified and as directed. | 75 | Kg | |
| 27 | 27 | Supplying, laying and testing of mild steel tubes 200 mm bore, ISI marked (IS-1239) heavy grade with all fittings and fixtures with flanged ends, any length, laid in trenches/wall/floors complete all as specified and as directed. | 50 | RM | |
| 28 | 28 | Mild steel flanges welded to mild steel tubes 80mm dia flange of any description including necessary gaskets, nuts, bolts & washers, tees, bends, dead plates, mild stee clamps etc complete all as specified and as directed. | 288 | Kg | |
| 29 | 29 | Mild steel flanges welded to mild steel tubes 100mm dia flange of any description including necessary gaskets, nuts, bolts & washers, tees, bends, dead plates, mild stee clamps etc. complete all as specified and as directed. | 360 | Kg | |
| 30 | 30 | Mild steel flanges welded to mild steel tubes 150mm dia flange of any description including necessary gaskets, nuts, bolts & washers, tees, bends, dead plates, mild steel clamps etc. complete all as specified and as directed. | 690 | Kg | |
| 31 | 31 | MBBR media made of poly propylene with virgin plastic UV stabilized milky white specific gravity 0.95 to 0.98 cylindercial or circular shape media, wagon wheel design cylinderical with external fins, surface area 500 Sqm/ Cum non toxic complete all as specified and as directed. | 43 | Cum | |
| 32 | 32 | Tube Settler modules hexagonal cheviron shape tongue and groove fitting UV stablized Virgin of PVC based black colour thicness 1.0mm Media complete all as specified and as directed. | 30 | Sqm | |
| 33 | 33 | For Equalisation Tank) (2 HP) FOR 100 & 200 KLD\nSupply, installation, commissioning and testing of non clog submersible sewage Pump set for type of installation stationary suitable to handle domestic sewage water ( solid particle upto size 100 mm) having Discharge 300 LPM at a head of 10 metre suitable for delivery pipe 50 mm bore, 415V (+ 5% & +10%) & frequency 50Hz + 3%) complete all as specified and as directed. \nMaterial of Construction: Pump casing (Pump+ Motor) CI (FG 260), Impeller: CI (FG 260) ; Shaft: SS – 410, Fast: SS \n \n | 4 | Each Job | |
| 34 | 34 | The pump shall consist of following features :- \n(a) Double bi-directional mechanical seal with silicon carbide faces for long service life.\n(b) Lateral cable entry to avoid transport and installation damage & also having resin filled triple protection cable assembly to avoid leakage in the motor even in the event of damage of cable.\n(c) Temperature sensors to prevent the motor winding form overheating.\n(d) Special moisture sensor to prevent motor winding even in the event of accidental water entry.\n(e) Automatic, bolt-free connection, leakage prevented by means of elastic seal to allow operator-friendly to easy installation and removal of the pump sets from duck foot bend for stationary installation.\n(f) Antifriction ball bearing, packed with grease for life\n(g) Flanged duck foot bend for discharge pipe – 01 No\n(h) Submersible cable three core x 02 runs of required size and length from non clog submersible pump set to Starter. (j) Flow meter -1 No\n(k) Accessory like nuts,bolts,washers & flanges. | |||
| 35 | 35 | For Equalisation Tank) (2 HP) FOR 300 KLD\nSupply, installation, commissioning and testing of non clog submersible sewage Pump set for type of installation stationary suitable to handle domestic sewage water ( solid particle upto size 100 mm) having Discharge 450 LPM at a head of 10 metre suitable for delivery pipe 100 mm bore, 415V (+ 5% & +10%) & frequency 50Hz + 3%) complete all as specified and as directed. \nMaterial of Construction: Pump casing (Pump+ Motor) CI (FG 260), Impeller: CI (FG 260) ; Shaft: SS – 410, Fast: SS \n \n | 2 | Each Job | |
| 36 | 36 | The pump shall consist of following features :- \n(a) Double bi-directional mechanical seal with silicon carbide faces for long service life.\n(b) Lateral cable entry to avoid transport and installation damage & also having resin filled triple protection cable assembly to avoid leakage in the motor even in the event of damage of cable.\n(c) Temperature sensors to prevent the motor winding form overheating.\n(d) Special moisture sensor to prevent motor winding even in the event of accidental water entry.\n(e) Automatic, bolt-free connection, leakage prevented by means of elastic seal to allow operator-friendly to easy installation and removal of the pump sets from duck foot bend for stationary installation.\n(f) Antifriction ball bearing, packed with grease for life\n(g) Flanged duck foot bend for discharge pipe – 01 No\n(h) Submersible cable three core x 02 runs of required size and length from non clog submersible pump set to Starter. \n(j) Flow meter -1 No\n(k) Accessory like nuts,bolts,washers & flanges. | |||
| 37 | 37 | For Clear Water Tank to Filters) (3 HP):- FOR 300 KLD\nSupply, installing, testing and commissioning of centrifugal pumping set mounted on common base plate foundation with discharge of pumping set 400 LPM at 15mtr head directly coupled with electric motor of suitable capacity for above pumping set complete with all accessories. \n(i) Delivery pipe 80mm dia MS pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of sluice valves and non return valve all as required.\n(ii) PCC platform in Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate 30cm above ground level including necessary eye bolts etc as per manufacturer recommendation. \n(iii) Cable connection shall be of copper conductor armed of sutable size laid underground including earth work, sand cushioning, cable cover and protection pipe wherever required at site from panel to pump set. \n(iv) Flow meter -01 No \n(v) Foot valve 80mm dia -01 No\n | 2 | Each Job | |
| 38 | 38 | For Clear Water Tank to Filters) (2 HP):- FOR 100 & 200 KLD\nSupply, installing, testing and commissioning of centrifugal pumping set mounted on common base plate foundation with discharge of pumping set 300 LPM at 15mtr head directly coupled with electric motor of suitable capacity for above pumping set complete with all accessories complete all as specified and as directed. \n(i) Delivery pipe 80mm dia MS pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of sluice valves and non return valve all as required.\n(ii) PCC platform in Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate 30cm above ground level including necessary eye bolts etc as per manufacturer recommendation. (iii) Cable connection shall be of copper conductor armed of sutable size laid underground including earth work, sand cushioning, cable cover and protection pipe wherever required at site from panel to pump set. \n(iv) Flow meter -01 No \n(v) Foot valve 80mm dia -01 No\n | 4 | Each Job | |
| 39 | 39 | (For Sludge transfer Tube Settler to Sludge drying beds) (1/2 HP)\nSupply, installing, testing and commissioning of screw pumping set mounted on common base plate foundation with discharge of pumping set 50 LPM at 10mtr head directly coupled with electric motor of suitable capacity for above pumping set complete with all accessories complete all as specified and as directed. \n(i) Delivery pipe 80mm dia MS pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of sluice valves and non return valve all as required.\n(ii) PCC platform in Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate 30cm above ground level including necessary eye bolts etc as per manufacturer recommendation. \n(iii) Cable connection shall be of copper conductor armed of sutable size laid underground including earth work, sand cushioning, cable cover and protection pipe wherever required at site from panel to pump set. \n(iv) Flow meter -01 No \n | 6 | Each Job | |
| 40 | 40 | Supply, installing, testing and commissioning dosing pump high pressure single head gear motored adjustable dosing pump with all acessories such as lead tubing,connecting nuts,injection check valve,clay weight and ferrules with following specifications including PVC tank of 200 ltrs to calculate the dose to be injected with counted screen for chlorine counts in PPM:-\n(i) Adjustable high pressure -0-100 PSI\n(ii) Power - 0.25 HP AC 230 Volts,50 Hz\n(iii) RPM -44\n(iv) HP -1/30 fractioanal\n(v) Output -2 US GPD to 40 US GPD \n(vi) Cable connection shall be of copper conductor armed of sutable size laid underground including earth work, sand cushioning, cable cover and protection pipe wherever required at site from panel to pump set. | 6 | Each | |
| 41 | 41 | Supply, installing, testing and commissioning air compressor assembly complete of capacity 120 Cu.m/hour, 415 V, 3 Phase 50 Hz including NRV, air filter, cleaner etc as specified including necessary cable connection shall be of copper conductor armed of suitable size laid underground including earth work, sand cushioning, cable cover and protection pipe wherever required at site from starter to Air Compressor assembly complete all as specified and as directed.\n(for 100 KLD ) | 2 | Each | |
| 42 | 42 | Supply, installing, testing and commissioning air compressor assembly complete of capacity 250 Cu.m/hour, 415 V, 3 Phase 50 Hz including NRV, air filter, cleaner etc as specified including necessary cable connection shall be of copper conductor armed of suitable size laid underground including earth work, sand cushioning, cable cover and protection pipe wherever required at site from starter to Air Compressor assembly complete all as specified and as directed. \n(for 200 KLD) | 2 | Each | |
| 43 | 43 | Supply, installing, testing and commissioning air compressor assembly complete of capacity 200 Cu.m/hour, 415 V, 3 Phase 50 Hz including NRV, air filter, cleaner etc as specified including necessary cable connection shall be of copper conductor armed of suitable size laid underground including earth work, sand cushioning, cable cover and protection pipe wherever required at site from starter to Air Compressor assembly complete all as specified and as directed. \n(for 300 KLD) | 3 | Each | |
| 44 | 44 | Supply and Fixing of bar Screen Unit of 1000mm x 1100mm x 90mm size consisting of 2. Nos. of bar screens made of 3mm x 30mm strips spaced at a center distance of 30 mm and fixed at an angle of 60 degrees to horizontal, all bar strips firmly welded to angle iron frame of 30mm x 30mm x 3 mm thick as shown in drawings, entire bar screen unit is made in stainless steel 304 grade material and bolted to side walls, using anchor bolts of SS 304 material in ihe middle of bar Screen chamber complete all as specified and as directed.\n | 3 | Each | |
| 45 | 45 | Supply and Fixing of lint Catcher Screen size 6 mm x 200 mm x1000 mm, in S.S. 304 gradematerial, in position in the MBBR tanks. (for MBBR 1, MBBR 2, tube settling tank) complete all as specified and as directed. | 9 | Each | |
| 46 | 46 | Supply and fix Hand Operated Chain Pulley Block of capacity 1 ton having load chain 6 mm dia and standard lift height 3 meters, automatic double pawl breaking system, alloy steel load wheel mounted on 4 ball bearing , double cover protection , fully forged hooks are fitted with safety latches, zinc plated hand chain etc complete all as specified and as directed. | 3 | Each | |
| 47 | 47 | Supply, fixing and commissioning factory fabricated multi media filter (MMF), cylinderical shape mild steel construction, epoxy coated of capacity as per specification at 15 metre head with supporting layers of pebbles and graded quartz gravels as filter media with & including suitable staging as per manufacturers instructions complete all as specified and as directed. | 3 | Each Job | |
| 48 | 48 | Supply, fixing and commissioning factory fabricated activated carbon filter (ACF), cylinderical shape mild steel construction, epoxy coated of capacity as per specification at 15 metre head with activate carbon layers as filter media with & including suitable staging as per manufacturers instructions complete all as specified and as directed. | 3 | Each Job | |
| 49 | 49 | Online BOD /COD/TSS/pH/ Analyzer System Display :- \nHigh contrast 40 character x 16 line backlit LCD with LED backlight \nRange :- 0 to 250 mgC/L with Exceedance tracking up to 1000 mg/L \nParameters :- Measures TOC, TIC, TC,TDS,TSS and COD, BOD by correlation.\nRange Selection :- Automatic or Manual Range as per Client requirement \nRepeatability :- ±4% of reading or ±.04 mg/L (40 ppb) whichever is greater \nSelf-Cleaning :- In-built self-cleaning of sample line after each measurement cycle \nPower Requirements :- 115/220Vac \nAuto-Calibration: - Yes. \nData Storage: - Previous 9999 reaction data Previous 99 fault events.\nIncludes OPUS cal Out let COD,BOD ,TDS&TSS\npH analyzer with PH Sensor \nDATA ACQUISION SYSTEM For Real Time Data Transmission to web server \n | 3 | Each | |
| 50 | 50 | Supply, installing, testing and commissioning of centrifugal pumping set mounted on common base plate foundation with discharge of pumping set 250 LPM at 5 mtr head directly coupled with electric motor of suitable capacity for above pumping set complete with all accessories :-(1HP)\n(i) Delivery pipe 100mm dia MS pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of sluice valves and non return valve all as required.\n(ii) PCC platform in Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate 30cm above ground level including necessary eye bolts etc as per manufacturer recommendation. \n(iii) Necessary cable connection of sutable size copper conductor laid from starter to motor terminals. | 3 | Each | |
| 51 | 51 | Foot valve conforming to IS 4038, 100mm dia bore complete all as specified and as directed. \n | 3 | Each | |
| 52 | 52 | Air release valve double( isolated type) with flanged ends suitable for 100 mm bore tube ISI (IS 14846) marked complete all as specified and as directed. | 3 | Each | |
| 53 | 53 | Construction of valve chamber of internal size 750mm x 750mm x 750mm suitable for 80mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 25 x 25 x 3mm all round and at diagonals of size 40mm x 40mm x 6mm and also MS plate welded to MS angle as shown in drawing, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc, all as specified and as directed. | 3 | Each Job | |
| 54 | 54 | M&L for earthing complete with galvanized steel earth plate electrode 600mmx600mmx6mm thick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead 32X6mm size by means of nuts bolts,washers,check nuts of galvanised iron and 32mm x 6mm earth lead protected by provision of GI medium grade 40 mm bore including provision of 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 KG/Sqmm) and frame of angle iron 40mmx40mmx3 mm with 6mm dia MS bar handle made to shape, GI light grade pipe 20mm dia for watering of suitable length placed on the TOP edge of earth plate,common salt and charcoal filling with fixing arrangement, funel,wire mesh and earth work in any type of soil , returning filling in and removal of surplus soil to a distance not excceding 50 mtr complete all as specified and shown in EP-3 of SSR Part-I and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and as directed. | 28 | Each Set | |
| 55 | 55 | M&L for earthing complete with galvanized steel earth plate electrode 600mmx600mmx6mm thick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4 mm dia by means of nuts bolts,washers,check nuts of galvanised iron and GI earth lead protected by provision of GI medium grade 15 mm bore pipe including provision off 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 KG/Sqmm) and frame of angle iron 40mmx40mmx3 mm with 6mm dia MS bar handle made to shape, GI light grade pipe 20mm dia for watering of suitable length placed on the TOP edge of earth plate,common salt and charcoal filling with fixing arrangement, funel,wire mesh and earth work in any type of soil , returning filling in and removal of surplus soil to a distance not excceding 50 mtr complete all as specified and shown in EP-3 of SSR Part-I and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and as directed. | 13 | Each Set | |
| 56 | 56 | Supply and fixing LED security light 35 Watt energy saving and environmental friendly long life led street light made up of pressure die cast aluminium housing with high power led as lighting source and lens embedded PC cover having IP65 protection and impact resistance of iK07 of capacity 35 Watt including GI bkt of 40 mm bore pipe of med grade 1.5 mtr long bent to shape duly fixed with two No clamp fabricated to shape made of MS 50 X6 mm and making neccessry connection with 1.5 sqmm aluminium wire from fitting to pole box complete all as specified and as directed.\nMakes: Havells Model ENDURA CITYLITE PLATLNUM PLUS Cat part No LHETBXU7PAIS035 or equivalent in Philips/SYSKA/CG/Polycab \nNote: MS clamps, Nut bolt & washers shall be measured under respective items of Sch. | 18 | Each | |
| 57 | 57 | M& L for LT feeder panel box with, installation, testing and commissioning, factory fabricated prewired, cubical type of appropriate size indoor type , dust and vermin proof, made out 2 mm thick CRCA sheet with openable shutters on both sides (front & rear), powder coated externally and internally, having locking arangement floor mounted grouted with appropriate size of nut bolts complete all as specified & directed to accommodate the following accessories:- | 1 | Each Job | |
| 58 | 58 | INCOMING:- (a) Aluminium bus bar 150 A for three phase and neutral duly insulated with sleeves of different colour RYB .\n(b) MCCB 40 Amp FP 25 KA -01 No\nOUTGOING:-\n(a) MCB TPN 20 Amp -02 Nos ( for Air compressor)\n(b) MCB TPN 10 AMP-06 Nos ( for centrifugal & submersible pump )\n(c) MCB 6-32 Amp SPN-01 No ( for Security lights )\n(d) DOL Starter 4 HP-06 Nos\n(e) DOL Starter 5 HP -02 Nos\n(f) DOL Starter 0.5 HP -02 Nos\n(g) Change over 40 Amp FP-01 No\nNotes : (i) Incoming and outgoing cable shall be fixed with appropriate size of copper thimble. \n(ii) Apron shall be provided at bottom for protection of cable to avoid entry of vermins, reptiles.\n(iii) All MCCBs shall be of thermal adjustable release.\n(iv) Entries of all sizes of cables in panel should be done through adequate size of metallic cable glands. | |||
| 59 | 59 | M& L for LT feeder panel box with, installation, testing and commissioning, factory fabricated prewired, cubical type of appropriate size indoor type , dust and vermin proof, made out 2 mm thick CRCA sheet with openable shutters on both sides (front & rear), powder coated externally and internally, having locking arangement floor mounted grouted with appropriate size of nut bolts complete all as specified & directed to accommodate the following accessories:- | 2 | Each Job | |
| 60 | 60 | INCOMING:- (a) Aluminium bus bar 40 A for three phase and neutral duly insulated with sleeves of different colour RYB .\n(b) MCCB 25 Amp FP 25 KA -01 No\nOUTGOING:-\n(a) MCB TPN 10 Amp -02 Nos ( for Air compressor)\n(b) MCB TPN 6 AMP-06 Nos ( for centrifugal & submersible pump )\n(c) MCB 6-32 Amp SPN-02 Nos ( for Security lights )\n(d) DOL Starter 2 HP-06 Nos\n(e) DOL Starter 5 HP -02 Nos\n(f) DOL Starter 0.5 HP -02 Nos\n(g) Change over 40 Amp FP-01 No\nNotes : (i) Incoming and outgoing cable shall be fixed with appropriate size of copper thimble. \n(ii) Apron shall be provided at bottom for protection of cable to avoid entry of vermins, reptiles.\n(iii) All MCCBs shall be of thermal adjustable release.\n(iv) Entries of all sizes of cables in panel should be done through adequate size of metallic cable glands. | |||
| 61 | 61 | Supply, installation,testing and commissioning Silent diesel engine driven generating set of suitable BHP to give 30 KVA output at Dharmshala cantt, continuous rating directly coupled alternator at 1500 RPM, water cooled turbo charged ,with common base plate frame flexible coupling ,electronic control panel for engine ,displaying battery voltage, coolant water temperature ,lubricating oil pressure engine speed and engine hours ,safety trip and indication for high water temperature, low lubricating oil pressure and over speed, alternator self excited, self regulated brushless excitation. Voltage regulation (+/-1%)of related voltage from no load to full load, acoustic enclosure, Fuel piping ,Exhaust piping ,control wiring cable from engine to control panel ,all as specified and as directed.\nThe generator set shall be Skid mounting type base frame fabricated from suitable MS channel suitably machined to ensure perfect alignment of the engine & alternator with rigid construction & necessary reinforcement to ensure minimum vibrations. AVM Pads: Suitable number of AVM pads shall be supplied with Silent DG Set.\n(a) Diesel Engine: The Engine as per IS : 10001/10002 of suitable BHP at Dharmshala Cantt to give suitable output from alternator for 30 KVA capacity (1500 RPM.Radiator water cooled ,turbo charged /naturallyat 1500 RPM. The engine shall be provided with electrical starting arrangement complete as per manufacturers instructions. | 1 | Each Job | |
| 62 | 62 | Makes: M&M/Kirloskar/Cummins /Ashoke Leyland. Salient feature of accessories shall be as under:-\n(i) A1 class Governor\n(ii) Battery charging Alternator\n(iii) Fuel filter.\n(iv) Lube oil filter\n(v) Air cleaner\n(vi) Engine safety sensors (LLOP & HWT)\n(vii) Radiator Assembly, Radiator cooling fan ,water pump ,thermostat.\n(viii) RPM/Hour meter.\n(ix) Water Temp gauge, Oil pressure gauge, Oil temp gauge. \n(x) Fuel hoses.\n(xi) Protection Guard for safety of person from moving/rotating parts of generating set coupling .\n(xii) Complete all as per OEM design/instructions | |||
| 63 | 63 | (b) Alternator: The alternator as per IS : 13364 shall be designed for an output of 30 KVA at Dharmshala Cantt 1500 RPM, 415 volts, 0.8 PF suitable for 50 Hz, 3 phase, 4 wire system. The alternator is brushless type, screen protected, revolving field, self exited, self regulated with insulation class H band of voltage regulation (+/- 1%) in static condition alongwith suitable LT panel complete all as manufacturers instructions\nMakes: M&M/Stamford /Kirloskar Electric /Crompton Greaves /Jyoti \n(c) Accoustic Enclosure Pre-fabricated factory built ,free standing floor mounted out door type acoustic enclosure ,modular construction suitable for accommodation 30 KVA DG set as per specification ,approachable through doors,openable on four sides. The Enclosure shall confirm to the latest Environment (Protection) Act 1986(29 to 1988) and latest amendments inside to the rules Noise limit shall be 75 dB at 1 RM from the enclosure and suitable as per CPCB norms complete. The unit rate quoted is deemed to be inclusive of supply installation ,testing and commissioning of DG set with ACOUSTIC ENCLOSURE, Electric Panel and all accessories as specified. | |||
| 64 | 64 | (d) Fuel tank (Service Tank) of MS sheet complete as per manufactures design, complete with filling hole with threaded cap inlet out let ,drain and over flow connection arrangement ,air vent connection, fuel level indicator with scale to measure the qty of fuel in the tank etc. \nNotes:- (i) Diesel, Engine oil & grease ,coolant etc .required for commissioning and testing shall be supplied by contractor at his own cost. Initial supply of engine oil ,filling oil , coolant MF Battery 12V of suitable AH duly charged alongwith suitable leads PVC inulated with stranded copper conductor duly fixed with suitable size of brass/copper thimbles as recomended by manufacturer etc. till taken over of DG set .Rate quoted is deemed to be included for the same. \n(ii) LT UG cable and control cable as required for connecting as directed .\n(iii) LT UG cable from alternator to panel board and change over to load shall be measured and paid separately under relevant item. \n(iv) Any civil works such as PCC foundation for erection of DG set as per manufacturers recommendation and any other civil works involved in installation of DG set ,cost for which has been deemed to have included in the quoted rates.\n(v) Tenderer shall be provide operator manual spares catalogue, cost for which is deemed to have included in the quoted rates .\n(vi) Periodic maintenance chart as per manufacturers recommendation shall be provided duly framed . Cost for which is deemed to have been included in the quoted rates. | |||
| 65 | 65 | Supply, installation,testing and commissioning Silent diesel engine driven generating set of suitable BHP to give 15 KVA output at Dharmshala cantt,415 Volts ,3 Phase 4 wire, 50 Hz ,0.8PF, speed variation of engine 1500 RPM, continuous rating directly coupled alternator at 1500 RPM, water cooled turbo charged ,with common base plate frame flexible coupling ,electronic control panel for engine ,displaying battery voltage, coolant water temperature ,lubricating oil pressure engine speed and engine hours ,safety trip and indication for high water temperature, low lubricating oil pressure and over speed, alternator self excited, self regulated brushless excitation. Voltage regulation (+/-1%)of related voltage from no load to full load, acoustic enclosure, Fuel piping ,Exhaust piping ,control wiring cable from engine to control panel ,all as specified and as directed.\nThe generator set shall be Skid mounting type base frame fabricated from suitable MS channel suitably machined to ensure perfect alignment of the engine & alternator with rigid construction & necessary reinforcement to ensure minimum vibrations. AVM Pads: Suitable number of AVM pads shall be supplied with Silent DG Set.\n(a) Diesel Engine: The Engine as per IS : 10001/10002 of suitable BHP at Dharmshala Cantt to give suitable output from alternator for 15 KVA capacity (1500 PM. Radiator water cooled ,turbo charged /naturallyat 1500 RPM. The engine shall be provided with electrical starting arrangement complete as per manufacturers instructions. | 2 | Each Job | |
| 66 | 66 | Makes: M&M/Kirloskar/Cummins /Ashoke Leyland. Salient feature of accessories shall be as under:-\n(i) A1 class Governor\n(ii) Battery charging Alternator\n(iii) Fuel filter.\n(iv) Lube oil filter\n(v) Air cleaner\n(vi) Engine safety sensors (LLOP & HWT)\n(vii) Radiator Assembly, Radiator cooling fan ,water pump ,thermostat.\n(viii) RPM/Hour meter.\n(ix) Water Temp gauge, Oil pressure gauge, Oil temp gauge. \n(x) Fuel hoses.\n(xi) Protection Guard for safety of person from moving/rotating parts of generating set coupling .\n(xii) Complete all as per OEM design/instructions | |||
| 67 | 67 | (b) Alternator: The alternator as per IS : 13364 shall be designed for an output of 15 KVA at Dharmshala Cantt 1500 RPM, 415 volts, 0.8 PF suitable for 50 Hz, 3 phase, 4 wire system. The alternator is brushless type, screen protected, revolving field, self exited, self regulated with insulation class H band of voltage regulation (+/- 1%) in static condition alongwith suitable LT panel complete all as manufacturers instructions.\nMakes: M&M/Stamford /Kirloskar Electric /Crompton Greaves /Jyoti \n(c) Accoustic Enclosure Pre-fabricated factory built ,free standing floor mounted out door type acoustic enclosure ,modular construction suitable for accommodation 15 KVA DG set as per specification ,approachable through doors,openable on four sides. The Enclosure shall confirm to the latest Environment (Protection) Act 1986(29 to 1988) and latest amendments inside to the rules Noise limit shall be 75 dB at 1 RM from the enclosure and suitable as per CPCB norms complete. The unit rate quoted is deemed to be inclusive of supply installation ,testing and commissioning of DG set with ACOUSTIC ENCLOSURE , ElectricPanel and all accessories as specified. | |||
| 68 | 68 | (d) Fuel tank (Service Tank) of MS sheet complete as per manufactures design, complete with filling hole with threaded cap inlet out let ,drain and over flow connection arrangement ,air vent connection, fuel level indicator with scale to measure the qty of fuel in the tank etc. \nNotes:- (i) Diesel, Engine oil & grease ,coolant etc .required for commissioning and testing shall be supplied by contractor at his own cost. Initial supply of engine oil ,filling oil ,coolant MF Battery 12V of suitable AH duly charged alongwith suitable leads PVC inulated with stranded copper conductor duly fixed with suitable size of brass/copper thimbles as recomended by manufacturer etc. till taken over of DG set .Rate quoted is deemed to be included for the same. \n(ii) LT UG cable and control cable as required for connecting as directed .\n(iii) LT UG cable from alternator to panel board and change over to load shall be measured and paid separately under relevant item. \n(iv) Any civil works such as PCC foundation for erection of DG set as per manufacturers recommendation and any other civil works involved in installation of DG set ,cost for which has been deemed to have included in the quoted rates.\n(v) Tenderer shall be provide operator manual spares catalogue, cost for which is deemed to have included in the quoted rates .\n(vi) Periodic maintenance chart as per manufacturers recommendation shall be provided duly framed . Cost for which is deemed to have been included in the quoted rates. | |||
| 69 | 69 | Supply, installation, commissioning and testing automatic intelligent power factor corrector (APFC) capacitor bank indoor type with MPP capacitor for LT 3 phase 440 volts system 50C/s AC supply to improve PF upto 0.99 or unity automatically step wise switch capacitor panel floor mounted indoor type weather proof dust/vermin proof protection IP 43 type made out of MS sheet 2 mm thick cubical type factory made duly power coated light grey color painted, front open able panel shutter with locking arrangement to facilitate easy maintenance complete natural air cooled cable entry with gland plate grouted in floor with suitable size of nut bolts complete of capacity 20 KVAR (i.e.) 5 KVAR X 4 Nos all as directed.\nMakes:- CPRI certified. Alongwith suitable size of relay , incoming MCCB, aluminium bus bar, TP MCBs, auto manual toggle switches, LED lamp indicators & suitable meter to note PF including complete control wiring with suitable size of PVC insulated copper conductor cable complete in all respects as per manufacturers design for best function of APFC panel .\nNote :-The rate quoted shall deemed to include for cable connection incl cables glands and earth connection with GI strip 32x6mm (as per current capacity) including necessary jointing material to earth lead. | 3 | Each | |
| 70 | 70 | Supply & fix pole box of new technology Thermoplastic Polycarbonate Pole box ,testing and commissioning of Thermoplastic Polycarbonate Pole box which is shock, rust, dust, impact and water proof, halogen and silicon free, UV resistance with internally embedded gasket high grade gasket made of polyurethane.The thermoplastic pole box suitable size with degree of protection IP 65,type tested , system voltage – 230V , 50Hz, Capacity with temperature resistance of -40oC to 120oC, with cable entry ,suitable size of Glands, all as specified and duly mounted on steel tubluar pole with suitable MS flat with bolts nuts and washers complete including suplly fixing and making provision of the following :- (a) MCB SP 0.5-5 Amp of Make : Hensal / Rittal/Meco. Note : Inspection by company Engineer after installations at site. | 18 | Each | |
| 71 | 71 | Angle cock chormimum plated suitable for 15mm dia bore complete all as specified and as directed. | 6 | Each | |
| 72 | 72 | Point wiring with 1.5 sqmm copper conductor cables (multistranded), PVC insulated , unsheathed FRLS (using colour code as per IS), 1100 Volts grade in and including concealed PVC rigid conduit of 2mm thick heavy duty (ISI marked) of adequate size with sunk cast iron/pressed steel terminal box of adequate size with 3mm thick plastic laminated sheet top cover for one light /fan/bell/exhaust fan point controlled by one, one way switch including continuous 1.5 sqmm copper conductor (multistranded using colur code) PVC insulated and unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified and conforming to IS-694 complete all as specified and directed. | 27 | Per Point | |
| 73 | 73 | All as per item No 71 here-in-before but for one 3 pin socket outlet 5 Amps on the same board with other switches. | 6 | Per Point | |
| 74 | 74 | Point wiring with 2.5 sqmm copper conductor cables (multistranded), PVC insulated , unsheathed FRLS (using colour code as per IS), 1100 Volts grade in and including concealed PVC rigid conduit of 2mm thick heavy duty (ISI marked) of adequate size with sunk cast iron/pressed steel terminal box of adequate size with 3mm thick plastic laminated sheet top cover for one 3 pin socket outlet 15 amps on independent board including continuous 2.5 sqmm copper conductor (multistranded using colour code) PVC insulated and unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified and conforming to IS-694 complete all as specified and directed..\n | 3 | Per Point | |
| 75 | 75 | LED tube light fitting including LED tube, 1X20 Watt, single phase \n230 Volts wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete with all accessories internally pre wired and including connecting up electrically with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed.\nMakes:- Cat part No LL20-221-XXX-65NE1 of Wipro make or techno-commercially equivalent in Philps/Bajaj/Havells/Polycab. | 21 | Each | |
| 76 | 76 | Exhaust fan 305mm sweep, single phase, 1400 RPM, heavy duty with louver shutter and connecting with electrical system, including provision of cable copper flexible, PVC three core 23/0.0076 from ceiling rose to fan and grouting of holding down bolts in and including PCC \nM-15(nominal mix) blocks complete all as specified.\nMakes:- Bajaj/Havells/Polycab | 3 | Each | |
| 77 | 77 | Supply, installation, testing and commisioning Filter Press for Effluent treatment plant automatic type filteration capacity 1-500 Lit per hours, Nos of plate 10-20, filter area 100-200 Sqm design, feed pressure 3-20 bar, filter pressure size 600mmx600mm complete all as specified and directed. | 2 | Each | |
| 78 | 78 | Supply, installation, testing and commisioning Filter Press for Effluent treatment plant automatic type filteration capacity 1-500 Lit per hours, Nos of plate 20-30 filter area 300-400 Sqm design, feed pressure 3-20 bar, filter pressure size 800mmx800mm complete all as specified and directed. | 2 | Each | |
| 79 | 79 | Supply, installation, testing and commisioning Filter Press for Effluent treatment plant automatic type filteration capacity 1-500 Lit per hours, Nos of plate 40-50 filter area 400-500 Sqm design, feed pressure 3-20 bar, filter pressure size 1200mmx1200mm complete all as specified and directed. | 2 | Each | |
| 80 | 80 | Deduct credit for demolished/dismantled materials \nRs 822500.00(Minus) as listed in Schedule 'A' . \nLumpsum contract sum shall be arrived at after deducting the credit schedule amount.\nNote: Tenderers will not quote against this item being a firm amount. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
