}

Repair /Replacement Of Dg Set , Amf Panel , Bty Charger With Connected Works At Ota Gaya, Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar-Bihar

Military Engineer Services-MES has published Repair /Replacement Of Dg Set , Amf Panel , Bty Charger With Connected Works At Ota Gaya. Submission Date for this Tender is 29-08-2019. Electrical Panel Tenders in Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar Bihar. Bidders can get complete Tender details and download the document.




Tender Notice

21373246
Repair /Replacement Of Dg Set , Amf Panel , Bty Charger With Connected Works At Ota Gaya
Open Tender
Indian
Bihar
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar
29-08-2019

Tender Details

Repair /Replacement Of Dg Set , Amf Panel , Bty Charger With Connected Works At Ota Gaya

Key Value

Document Fees
INR 500 /-
EMD
INR 40000.0 /-
Tender Value
INR 20 Lakhs /-

BOQ Items

Name of Work: Repair/ maintainance of DG set , AMF panel , Bty Charger with connected works at OTA Gaya
Sl. No. Item Description Item Code / Make Quantity Units
1 1 M&L comprehensive maint and attending complaint of DG set 200 KVA completed all as specified and directed by E-in-Charge. 6 Each Complaint
2 2 Ditto all as per item No 1 here in before but 100 KVA capacity 14 Each Complaint
3 3 Ditto all as per item No 1 here in before but 25/30 KVA capacity. 4 Each Complaint
4 4 Supply and fixing Engine oil servo type in 20 Ltrs seal pack 20w/40 . Make:-HP/BP/Gulf 450 Ltrs
5 5 Supply and fixing radiator coolant in 1 Ltrs seal Pack . 40 Ltrs
6 6 Supply and fixing fuel filter Cartige as per sample of DG set 200 KVA capacity with rubber seal. . 3 Each Set
7 7 Supply and fixing mobil filter Cartige as per sample of DG set 200 KVA capacity with rubber seal. . 3 Each Set
8 8 Supply and fixing Air filter Cartige as per sample of DG set 200 KVA capacity with rubber seal. . 3 Each Set
9 9 Supply and fixing fuel filter Cartige as per sample of DG set 100 KVA capacity with rubber seal. . 7 Each Set
10 10 Supply and fixing mobil filter Cartige as per sample of DG set 100 KVA capacity with rubber seal. . 7 Each Set
11 11 Supply and fixing Air filter Cartige as per sample of DG set 100 KVA capacity with rubber seal. . 7 Each Set
12 12 Supply and fixing fuel filter Cartige as per sample of DG set 25/30 KVA capacity with rubber seal. . 2 Each Set
13 13 Supply and fixing mobil filter Cartige as per sample of DG set 25/30 KVA capacity with rubber seal. . 2 Each Set
14 14 Supply and fixing Air filter Cartige as per sample of DG set 25/30 KVA capacity with rubber seal. . 2 Each Set
15 15 M&L Seilencer assembly complete with mufler of 100 KVA DG set all as directed. 5 Each Set
16 16 Ditto all as per item No 15 here in before but 200 KVA DG set 3 Each Set
17 17 M&LReplacement of lead Acid battery of Cap 180 AH , 12V, complete all as specified and directed. Make : Exide New Xpress or its equivalent Tata 6 Each
18 18 M&LReplacement of lead Acid battery of Cap 150 AH , 12V, complete all as specified and directed. Make : Exide New Xpress or its equivalent Tata 2 Each
19 19 M&L for repairs of self starter of 200 KVA DG set by repair/replacement of following unserviceable items:-\n (i) Re-winding of self starter armature.\n (ii) Replacement of cumutator and brushes.\n (iii) Replacement of bentex complete all as specified and directed. 2 Assesed
20 20 M&L for repairs of self starter of 100 KVA DG set by repair/replacement of following unserviceable items:-\n (i) Re-winding of self starter armature.\n (ii) Replacement of cumutator and brushes.\n (iii) Replacement of bentex complete all as specified and directed. 2 Each
21 21 M&L for repairs of self starter of 25/30 KVA DG set by repair/replacement of following unserviceable items:-\n (i) Re-winding of self starter armature.\n (ii) Replacement of cumutator and brushes.\n (iii) Replacement of bentex complete all as specified and directed.\n 2 Each
22 22 M&L Replacement of AMF Gen Set controller for 200/100 KVA DG set as per sample complete all as specified and directed. 5 Each
23 23 M&L Automatic voltage regulator controller 200/100 KVA as per sample. 5 Each
24 24 M&L for repairs of dynemo cum alternator of 200 KVA DG set by repair/replacement of following unserviceable items complete all as specified and directed:-\n (i) Re-winding of dynemo.\n (ii) Replacement of circuit panel. 2 Each
25 25 M&L for replacement of lead Acid battery of Cap 100 AH , 12V, complete all as specified and directed. Make : Exide New Xpress or its equivalent Tata 2 Each
26 26 M&L for replacement of lead Acid battery of Cap 70 AH , 12V, complete all as specified and directed. Make : Exide New Xpress or its equivalent Tata 4 Each
27 27 M&L for replacement of Battery Charger cap 180 AH ,12 Volt Capacity ,single Phase 240 Volt inc Amp meter , Voltmeter and On Off Switch , Indicator(Red and Green) complete all as specified and directed. 4 Each
28 28 Supply , installation ,fabrication, testing and commissioning LT Panel board,Factory made cubical type, Outdoor type, floor mounted, factory made out of 40mm x 40mmx4mm angle iron frame and 3 .15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 800 amps rated aluminium bus bar for neutral complete with the following accessories incl Cable Gland & PCC Foundation and Coping taking down old all as specified and directed (Location -HQ Generator Panel )\nNote-MCCB and onload changeover switch will be measured and paid saparately against respective item of schedule. 1 Each job
29 28.01 (a) Incoming
30 28.02 (i)ON load Change Over Switches 250 Amp 04 Pole,415V ,Front Operated QTY-01 Nos,Make-HPL /Havells/L&T Lexic/Legrand/C&S Electric Ltd /ABB
31 28.03 (ii) MCCB 04 Pole 36 kA, 250Amp,415V QTY-01 Nos,Make-HPL / Havells/L&T Lexic/Legrand/C&S Electric Ltd /ABB
32 28.04 (b) Out goings
33 28.05 (i) MCCB 04 Pole 25 KA,160 Amp AC , 415 volts,QTY-02 Nos,Make-HPL/Havells/L&T Lexic/Legrand/C&S Electric Ltd /ABB
34 28.06 (ii) MCCB 04 Pole 25 KA,125 Amp AC , 415 volts,QTY-02 Nos,Make-HPL/Havells/L&T Lexic/Legrand/C&S Electric Ltd /ABB
35 28.07 (iii) Aluminium bus bar 3 phase, 4 wire 800 Amp,415 V
36 28.08 (iv) Digital Volt meter 0-500V with slector switch, make-AE/L&T
37 28.09 (v) Digital Amp meter 0-500 amp with CT and selector switch. make-AE/L&T
38 28.1 (vi) Indicating lamp (Blue, Yellow &Red-1 set)LED Type Make-AE/L&T/ Havells
39 29 Supply , installation ,fabrication, testing and commissioning LT Panel board,Factory made cubical type, Outdoor type, floor mounted, factory made out of 40mm x 40mmx4mm angle iron frame and 3 .15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 800 amps rated aluminium bus bar for neutral complete with the following accessories incl Cable Gland & PCC Foundation and Coping taking down old all as specified and directed (Location -GC MESS)\nNote-MCCB will be measured and paid saparately against respective item of schedule. 1 Each
40 29.01 (a) Incoming
41 29.02 (i) MCCB 04 Pole 36 kA, 250Amp,415V ,Make-HPL / Havells/L&T Lexic/Legrand/C&S Electric Ltd /ABB
42 29.03 (b) Out goings
43 29.04 (i) MCCB 04 Pole 25 KA,160 Amp AC , 415 volts,Make-HPL/Havells/L&T Lexic/Legrand/C&S Electric Ltd /ABB
44 29.05 (ii) Aluminium bus bar 3 phase, 4 wire 800 Amp,415 V
45 29.06 (iii) Digital Volt meter 0-500V with slector switch, make-AE/L&T
46 29.07 (iv) Digital Amp meter 0-500 amp with CT and selector switch. make-AE/L&T
47 29.08 (v) Indicating lamp (Blue, Yellow &Red-1 set)LED Type Make-AE/L&T/ Havells
48 29.09 (vi) MCCB 04 Pole 25 KA,125 Amp AC , 415 volts,Make-HPL/Havells/L&T Lexic/Legrand/C&S Electric Ltd /ABB
49 30 S&F MCCB 04 pole, 35 KA 630 Amps, AC 415 Volts complete all as specified and directed.\nMake:-HPL/Havells/L&T Lexic/Legrand/C&S Electric Ltd/ABB 1 Each
50 31 S&F MCCB 04 pole, 50 KA 400 Amps, AC 415 Volts complete all as specified and directed.\nMake:-HPL/Havells/L&T Lexic/Legrand/C&S Electric Ltd/ABB 1 Each
51 32 S&F MCCB 04 pole, 36 KA 250 Amps, AC 415 Volts complete all as specified and directed.\nMake:-HPL/Havells/L&T Lexic/Legrand/C&S Electric Ltd/ABB 2 Each
52 33 S&F MCCB 04 pole, 25 KA 160 Amps, AC 415 Volts complete all as specified and directed.\nMake:-HPL/Havells/L&T Lexic/Legrand/C&S Electric Ltd/ABB 4 Each
53 34 S&F MCCB 04 pole, 25 KA 125 Amps, AC 415 Volts complete all as specified and directed.\nMake:-HPL/Havells/L&T Lexic/Legrand/C&S Electric Ltd/ABB 4 Each
54 35 S&F MCCB 04 pole, 25 KA 100 Amps, AC 415 Volts complete all as specified and directed.\nMake:-HPL/Havells/L&T Lexic/Legrand/C&S Electric Ltd/ABB 1 Each
55 36 S&F On load change over switch 250 Amps, AC 415 volts with enclosures complete all as specified and directed. 1 Each
56 37 Excavation in trenches not exc 1.5 mtr wide not exc 1.5 depth and getting out in soft/loose soil complete all as specified and directed. 135 Cum
57 38 Returning, refiling in, incl spreading, watring and well ramming in layers not exc 25 cm in soft/loose soil. 86 Cum
58 39 Removing surplus soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point. 49 Cum
59 40 M&L Sand cushioning for underground cable with localy available sand for protection of cable incl spreading and consolidation complete all as specified and directedc. 41 Cum
60 41 Supply & Lay in trenches dry well burnt locally available sub Class "B" bricks over sand cushioning for protection of cable complete all as specified and directed. 4 Per 1000 Nos
61 42 Supply&Lay in trenches/laid floor/duct/drawn through conduit XLPE insulated , screened, PVC badded, galvenized steel striped or wire armoured heavy duty electric cabole 1100 V grade with alluminium conductor of cross sectional area of 120 sqmm, 3.5 core complete all as specified and directed. 100 RM
62 43 All as per item no 42 but of size 95 sqmm, 3.5 core 100 RM
63 44 All as per item no 42 but of size 50 sqmm, 3.5 core 100 RM
64 45 All as per item no 42 but of size 35 sqmm, 3.5 core 100 RM
65 46 All as per item no 42 but of size 25 sqmm, 3.5 core 150 RM
66 47 M&L Earthing complete with galvenized steel earth plate electrode 600mm x 600mm x 6mm buried diredctly in ground verticaly to a depth not less than 2.25 m below normal ground level (with top edge of earth plate not less than 1.5m below ground level) connected to GI strip 32mm x 6mm main earthing lead by means of galvenized bolts, nuts & washers all as showning in electrical plate no 3 of MES sch part-I (2009) with connected to earth test point & to main switch board etc with and an incl ediquate quantity of charcole dust and common salt around earth plate, PCC 1:3:6 type C1 using 20 mm graded stone agreegate for earth pit with precast RCC (1:2:4) type B1 using 20mm graded stone agreegate 40mm thick cover reinforce with 8mm dia TMT bars 3 nos both way with 20mm dia MS round bar handle, GI light grade watering pipe 20mm dia with funnel and wire mess and 40mm dia GI light grade earth lead protection pipe complete all as specified and directed. 4 Each Set
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail