Tender For Miscellaneous Petty Br Repair Works Pertaining To Daily Maintenance Services At Ctw Ins Viswakarma Bvy And Pallava Park Under Age Br Ii Of Ge Nd Visakhapatnam
Tender Value
45 Lakhs
Estimated cost
Bid Submission
30 Aug 2019
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatnam → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Miscellaneous Petty Br Repair Works Pertaining To Daily Maintenance Services At Ctw Ins Viswakarma Bvy And Pallava Park Under Age Br Ii Of Ge Nd Visakhapatnam
BOQ
| Name of Work: MISC PETTY B/R REPAIR WORKS PERTAINING TO DAILY MAINTENANCE SERVICES AT CTW, INS VISWAKARMA, BVY AND PALLAVA PARK UNDER AGE B/R - II OF GE [ND] VISAKHAPATNAM | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:-\n[i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time.\n[ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE.\n[iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places.\n[iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). | |||
| 2 | 2 | M & L Vitrified Ceramic tiles 8 to 10mm thick (square/ rectangular) polished, coloured (double charged) area of each tile not exceeding 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. | 50 | SqM | |
| 3 | 3 | M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. | 75 | SqM | |
| 4 | 4 | M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. | 75 | SqM | |
| 5 | 5 | M & L coloured Glazed ceramic tiles of size 450x350x7mm / 350x250x7mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tiles laid over and including 10mm thick backing coat in CM 1:3 including dismantling existing tiles complete all as specified and directed. | 100 | SqM | |
| 6 | 6 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. | 20 | SqM | |
| 7 | 7 | M & L for 18 to 20mm thick Marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. | 20 | SqM | |
| 8 | 8 | M & L for Machine cut cudappah stone slab 20 to 25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing slab complete all as specified and directed. | 20 | SqM | |
| 9 | 9 | M & L for Machine pressed precast cement conctete coloured interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade including dismantling existing tiles complete all as specified and directed. | 50 | SqM | |
| 10 | 10 | M & L for PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in cast in lintels upto 1.5m span, copings, bed blocks for hold fasts, bed plates, roof kerbs and similar work including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed. | 1 | CuM | |
| 11 | 11 | M & L for coloured chequered cement concrete tiles of size 25cm x 25cm x 22mm thick with mixture of white and grey cement in equal proportions and no pigments set, jointed and pointed in neat cement slurry as in foot paths laid over and including 15mm thick screed bed in CM 1:4 including dismantling of existing tiles complete all as specified and directed. [The design, colour and pattern shall be as approved by the GE] | 50 | SqM | |
| 12 | 12 | M & L for 40mm thick, PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in flooring including finishing the surfaces even and smooth with out using extra cement including demolition of existing concrete complete all as directed. | 50 | SqM | |
| 13 | 13 | M & L for 100mm thick, PCC 1:2:4, type B-2, using 40mm graded stone aggregate as in road/path, hard standing laid to slope in panels including joints filled with mastic filling and making impressions of expanded metal whilst the concrete is green including demolition of existing concrete complete all as specified and directed. | 50 | SqM | |
| 14 | 14 | M & L for 75mm thick, PCC 1:3:6, type C-2, using 40mm graded stone aggregate as in plinth protection laid to slope in panels including joints filled with mastic filling and finishing the surfaces even and smooth without using extra cement including demolition of existing concrete complete all as specified and directed. | 50 | SqM | |
| 15 | 15 | M & L for Precast RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in landings, cover slabs (for manholes), shelves and similar articles with plain faces including necessary formwork, and the like and set in CM 1:4 including demolition of existing concrete complete all as specified and directed. | 3 | CuM | |
| 16 | 16 | M & L for RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in chajjas and similar work including demolition of existing concrete complete all as specified and directed. | 2 | CuM | |
| 17 | 17 | Use and waste of formwork to sides and soffits of chajjas and similar work for rough finished surfaces of concrete flat complete all as specified and directed. | 80 | SqM | |
| 18 | 18 | M & L for TMT bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. | 850 | KG | |
| 19 | 19 | M & L for TMT bars 6 to 8mm dia, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. | 250 | KG | |
| 20 | 20 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. | 25 | EACH | |
| 21 | 21 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed. | 30 | EACH | |
| 22 | 22 | Taking down shutters not exc 1.0 Sqm each complete all as specified and directed. | 50 | LEAF | |
| 23 | 23 | Taking down shutters area exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified and directed. | 30 | LEAF | |
| 24 | 24 | M & L for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. | 30 | SqM | |
| 25 | 25 | M & L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. | 0.6 | CuM | |
| 26 | 26 | M & L for 25mm thick 2nd class soft wood boarding fixed with nails in any position as in shelves of builtin cupboards including dismantling old boarding complete all as directed. | 20 | SqM | |
| 27 | 27 | M & L for 2nd class hardwood 35mm thick Factory made, plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically presure treated fitted to chowkats complete all as directed. | 20 | SqM | |
| 28 | 28 | M & L for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared\nto receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers for securing glass, etc. complete all as directed. | 27 | SqM | |
| 29 | 29 | M & L for 2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared\nto receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers for securing glass, etc. complete all as directed. | 16 | SqM | |
| 30 | 30 | S & F solid PVC Door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS Square tube, and edges will be painted to match with printed sheet complete all as directed. | 115 | RM | |
| 31 | 31 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with 5mm thick and 15mm wide PVC sheet beading of 10mmx10mm (900) of exposed portion, and jointed together with solvent cement, fixing in the frame at site as specified and as directed. | 35 | SqM | |
| 32 | 32 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed. | 120 | SqM | |
| 33 | 33 | S & F 3mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. | 4.5 | SqM | |
| 34 | 34 | S & F Butt hinges, medium weight cold rolled mild steel of size 100mm complete all as specified and directed. | 195 | EACH | |
| 35 | 35 | S & F Butt hinges, medium weight cold rolled mild steel of size 75mm complete all as specified and directed. | 60 | EACH | |
| 36 | 36 | S & F extruded aluminium alloy handles fabricated type anodised of size 150mm complete all as directed. | 70 | EACH | |
| 37 | 37 | S & F extruded aluminium alloy handles fabricated type anodised of size 100mm complete all as directed. | 110 | EACH | |
| 38 | 38 | S & F aluminium anodised barrel tower bolt of size 150mm long of extruded section complete all as directed. | 130 | EACH | |
| 39 | 39 | S & F aluminium anodised barrel tower bolt of size 100mm long of extruded section complete all as directed. | 60 | EACH | |
| 40 | 40 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed. | 45 | EACH | |
| 41 | 41 | S & F 2nd class hard wood Plain fillets square, rectangular or triangular in section, of area not exc 3 Sqcm in section, clean sawn, secured with nails or brads complete all as directed. | 40 | RM | |
| 42 | 42 | S & F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane including hacking out old broken glass from any position complete all as specified and directed. | 20 | SqM | |
| 43 | 43 | S & F in repairs 19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. | 45 | SqM | |
| 44 | 44 | S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as directed. | 100 | RM | |
| 45 | 45 | S & F in repairs Harrison rails, mild steel, chromium plated with fixing and including brackets, stops, rollers etc complete all as directed. | 100 | RM | |
| 46 | 46 | M & L for Aluminium powder coated (Thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing and dismantling existing frame work complete all as directed. | 50 | KG | |
| 47 | 47 | M & L for Anodised aluminium powder coated door shutters, (minimum thickness of powder coating 50micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws including taking down old aluminium shutters complete all as directed. | 11 | SqM | |
| 48 | 48 | M & L for Anodised aluminium powder coated (Thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) including taking down old aluminium shutters complete all as specified and directed. | 24.5 | SqM | |
| 49 | 49 | S & F in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as specified and directed. | 15 | SqM | |
| 50 | 50 | M & L for Aluminium powder coated (Thickness of powder coating 50 micron) Deco grills of Model DG-104 (10mm) flat matt design riveted with rivets and fixed with suitable aluminium channel including necessary fixing arrangements and dismantling old grill complete all as directed. | 18 | SqM | |
| 51 | 51 | S & F in repairs Cast iron body door closer hydraulically regulated, of designation No. 2, universal type, suitable for door shutters of width of 701 to 850mm and weight between 36 to 60 kg and fixed complete all as specified and directed. | 10 | EACH | |
| 52 | 52 | M & L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be\nprepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including dismantling existing structural steel work complete all as specified and directed. | 300 | KG | |
| 53 | 53 | M & L for rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and\nfastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc incluing one shop coat of zinc chrome primer including dismantling existing structural steel work complete all as specified and directed.\n | 450 | KG | |
| 54 | 54 | S & F mild steel work as in hand rails, wind ties, fencing posts and struts, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, securing bolts, posts and struts in fencing, etc and similar work including dismantling existing mild steel work complete all as specified and directed. | 50 | KG | |
| 55 | 55 | M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. | 100 | SqM | |
| 56 | 56 | M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks including demolition of old brick work complete all as specified and directed. | 5 | CuM | |
| 57 | 57 | M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. | 50 | SqM | |
| 58 | 58 | M & L for PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete including demolition of existing concrete complete all as directed. | 2 | CuM | |
| 59 | 59 | M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement including taking down old platering complete all as directed. | 100 | SqM | |
| 60 | 60 | M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement including taking down old platering complete all as directed. | 100 | SqM | |
| 61 | 61 | M & L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces finished even and smooth with out using extra cement including taking down old platering complete all as directed. | 50 | SqM | |
| 62 | 62 | M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directetd. | 100 | SqM | |
| 63 | 63 | M & L for preparation of newly plastered surfaces of wall and applying 3mm thick wall care putty for making good undulations to obtain smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. | 100 | SqM | |
| 64 | 64 | M & L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directetd. | 50 | SqM | |
| 65 | 65 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litres capacity, triple layered, hoisted and fixed in position including dismantling old tank complete all as specified and directed. | 2 | EACH | |
| 66 | 66 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litres capacity, triple layered, hoisted and fixed in position including dismantling old tank complete all as specified and directed. | 4 | EACH | |
| 67 | 67 | S & F in repairs 20mm dia Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. | 30 | EACH | |
| 68 | 68 | M & L for gun metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed including dismantling old gate valve complete all as specified and as directed. | 5 | EACH | |
| 69 | 69 | M & L for gun metal, globe or gate valves, 25mm bore with iron wheel head, screwed both ends for iron pipe and fixed including dismantling old gate valve complete all as specified and as directed. | 5 | EACH | |
| 70 | 70 | Supplying and fixing 15mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down old GI tubing complete all as specified and directed. | 100 | RM | |
| 71 | 71 | Supplying and fixing 20mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down old GI tubing complete all as specified and directed. | 75 | RM | |
| 72 | 72 | Supplying and fixing 25mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down old GI tubing complete all as specified and directed. | 50 | RM | |
| 73 | 73 | S & F in repairs Brass chromium plated shower rose 125mm dia with or without swivel joints, including fixing to steel pipe or union complete all as directed. | 15 | EACH | |
| 74 | 74 | S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 lit capacity, low level, white, with inlet, ball valve, float and handle including brackets and 32mm bore PVC flush pipe complete all as specified and directed. | 12 | EACH | |
| 75 | 75 | S & F in repairs Vitreous china wash basin, white flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling, 32mm dia PVC waste pipe complete all as specified and directed. | 6 | EACH | |
| 76 | 76 | S & F in repairs 15mm dia Pillar tap, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. | 10 | EACH | |
| 77 | 77 | S & F in repairs sinks with drainage board of size not les than 915x460mm, bowl size 410x330x160mm made of stainless steel AISI 304 (SS-304) 1mm thick with plugs, washers and wastes, including bedding in cement mortar on dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed. | 5 | EACH | |
| 78 | 78 | S & F in repairs Waste coupling of PTMT (half or full threaded) for 32mm bore discharge pipe of minimum weight 45gms complete all as specified and directed. | 15 | EACH | |
| 79 | 79 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as directed. | 20 | EACH | |
| 80 | 80 | S & F in repairs 15 mm bore fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed. | 25 | EACH | |
| 81 | 81 | S & F in repairs 15mm dia fancy type, Stop valve, chromium plated with long shank and cup concealed type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed. | 10 | EACH | |
| 82 | 82 | S & F in repairs 15mm dia chromium plated Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as directed. | 10 | EACH | |
| 83 | 83 | S & F in repairs 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as directed. | 5 | EACH | |
| 84 | 84 | S & F in repairs Vitreous china Squatting Pan, white, 'Orissa' pattern, of size 580 x 440mm, with integral foot rests including cast iron 'P' or 'S' trap and provision of cement concrete bedding and making good the disturbed surfaces to match with existing flooring complete all as directed. | 6 | EACH | |
| 85 | 85 | S & F in repairs Wash down water closet (Pedestal pattern), Vitreous China white, plastic water closet seat of same colour closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. | 5 | EACH | |
| 86 | 86 | S & F in repairs 100mm bore Cast iron 'P' or 'S' trap complete all as directed. | 5 | EACH | |
| 87 | 87 | S & F in repairs plastic water closet seat cover, black or white closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed. | 10 | EACH | |
| 88 | 88 | S & F in repairs Hand Shower (Health faucet) including 1.0m Long flexible Stainless steel connecting pipe including necessary accessories complete all as directed. | 25 | EACH | |
| 89 | 89 | S & F in repairs Vitreous china urinal half stall type with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; complete all as specified and directed. | 5 | EACH | |
| 90 | 90 | S & F in repairs bevelled edge looking mirror of selected quality glass, of size 600 x 450 x 5.5mm thick mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium beading alround complete all as specified and directed. | 10 | EACH | |
| 91 | 91 | S & F in repairs superior quality CP brass tubular towel rail 20mm dia, D type, 60cm long between facings including brackets complete all as directed. | 10 | EACH | |
| 92 | 92 | S & F in repairs Cchromium plated Grating round 100 mm size without hole complete all as directed. | 15 | EACH | |
| 93 | 93 | S & F in repairs Stainless steel Toilet roll paper holder box type with flap complete fixed in repairs all as directed. | 5 | EACH | |
| 94 | 94 | S & F in repairs Chromium plated soap dish holder complete fixed in repairs all as directed. | 5 | EACH | |
| 95 | 95 | S & F in repairs 15mm bore central hole CP basin mixer without popup waste system with 450mm Long copper pipe & brass nuts, 15mm cartridge size including necessary accessories complete fixed in repairs all as directed. | 5 | EACH | |
| 96 | 96 | S & F in repairs PVC bodycabinet mirror of size 350mmx450mmx100mm in PTMT alloy of approved pattern and design fixed in repairs complete all as directed. | 5 | EACH | |
| 97 | 97 | M & L for preparation of old painted surfaces of walls of any description, not otherwise described, over 10cm in width or girth and applying one coat of exterior weather proof emulsion paint complete all as specifed and directed. | 10000 | SqM | |
| 98 | 98 | M & L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as spcified and directed. | 4000 | SqM | |
| 99 | 99 | M & L for preparation of old decorated surfaces of ceilings and applying one coat of white wash complete all as spcified and directed. | 1500 | SqM | |
| 100 | 100 | M & L for complete removal of existing treatment from wall surfaces including preparation of surfaces and applying 3mm thick wall care putty for making good undulations to obtain smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. | 3000 | SqM | |
| 101 | 101 | M & L for preparation of old decorated surfaces of walls and applying one coat of colour wash complete all as spcified and directed. | 3000 | SqM | |
| 102 | 102 | M & L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint complete all as directed. | 3000 | SqM | |
| 103 | 103 | M & L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of distemper oil emulsion complete all as spcified and directed. | 10000 | SqM | |
| 104 | 104 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed. | 2500 | SqM | |
| 105 | 105 | M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed. | 2000 | SqM | |
| 106 | 106 | S & F 75mm bore PVC (SWR) soil, waste and vent pipes, Single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. | 50 | RM | |
| 107 | 107 | S & F 75mm bore PVC (SWR) soil, waste and vent pipes, Single socketed in any length with rubber ring joints laid in floors or trenches including taking down old pipes complete all as specified and directed. | 50 | RM | |
| 108 | 108 | S & F 100mm bore PVC (SWR) soil, waste and vent pipes, Single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. | 50 | RM | |
| 109 | 109 | S & F 100mm bore PVC (SWR) soil, waste and vent pipes, Single socketed in any length with rubber ring joints laid in floors or trenches including taking down old pipes complete all as specified and directed. | 50 | RM | |
| 110 | 110 | M & L for 75mm bore PVC (SWR) bends any radius with oval access door complete all as specified. | 5 | EACH | |
| 111 | 111 | M & L for 110mm bore PVC (SWR) bends any radius with oval access door complete all as specified. | 5 | EACH | |
| 112 | 112 | M & L for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified. | 5 | EACH | |
| 113 | 113 | M & L for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified. | 5 | EACH | |
| 114 | 114 | S & F in repairss Stack clamps made out of mild steel flat iron of size 50x5mm and 16mm dia round\niron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as directed. | 30 | EACH | |
| 115 | 115 | M & L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete as in sunken floors including demolition of old concrete complete all as specified. \n[Notes: Quoted rate is inclusive for \n(i) Demolition of WC, traps, sanitary connections and removing all debris outside defence land. \n(ii) Sealing the gaps / joints between WC and flooring, joints of nahani trap & connecting pipes with sealent as recommended by the manufacturer | 2 | CuM | |
| 116 | 116 | Removal of existing sunken floor treatment including taking out of cement plaster and preparation of surfaces with wire brushes, cleaning with water and applying epoxy treatment with one coat of NITO proof chemical to bottom and sides as per manufacturers instructions and providing 15mm thick plaster in CM 1:3 mixed with and including water proofing compound @ 3% by weight of cement to cover entire portion of epoxy coating including testing the sunken floor for 48 hours duly filled with water complete all as per manufacturers instructions and as directed by the Engineer-in-Charge. [Note: The work shall be executed by authorised agency of the chemical] | 20 | SqM | |
| 117 | 117 | Disconnecting existing tanks of capacity 500 litres to 1000 litres, setting aside (or lowering if required) and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as directed. [Note: Quoted rate shall deemed to be included for writing details of \"Tank cleaned on ______ (date)\" as directed by Engineer-in-Charge]. | 50 | EACH | |
| 118 | 118 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated / 'Z' profile steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete including dismantling existing Asbestos sheets in roof coverings complete all as specified and directed. | 50 | SqM | |
| 119 | 119 | S & F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete including dismantling existing asbestos sheets in roof coverings complete all as specified and directed. | 20 | SqM | |
| 120 | 120 | M & L for providing and injecting chemical emulsion for post construction anti-termite treatment at points of contact of wood work by chemical emulsion CHLOROPYRIFOS 20 EC at 1% concentration at the rate of 0.5 litre per each hole by drilling 6mm dia holes at a downward angle of 45 Degree at 150mm centre to centre complete all as specified and directed. | 50 | RM | |
| 121 | 121 | M & L for Repairs to damaged RCC surfaces of chajjas, soffits of slabs, beams, columns, cantilever slabs, beams, columns, fins, stair cases, railing, etc at any height and in any position including cutting / chipping the spalling concrete surfaces and applying epoxy treatment for bonding new or old concrete surfaces and providing welded steel wire fabric mesh 75x25mm of weight not less than 4.0 Kg/Sqm on prepared surface with suitable pins/clamps/ welding to the existing reinforcement and applying polymer modified cementous coating on concrete surfaces prepared for guniting and finished with 40mm thick (25mm thick average) pressure Guniting in Cement mortar 1:3, applied by pressure hoses finishing the plastered surfaces with two coats of cement base paint over a coat of primer complete all as specified and directed. [Note: Work has to be executed in Watch towers upto 12m height] | 25 | SqM |
AI Tender Summary
Tender Timeline
Aug 08, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 30, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 05, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender