Construction Of Store For Capacity To Store 100 Qt Bhusa With Shutter For Cattle Sanctuary At Village Handa Khundi , Nalagarh , Distt . Solan ( H . P ) .
Tender Value
19.07 Lakhs
Estimated cost
Bid Submission
21 Aug 2019
0 days left
EMD
38200
Bank guarantee accepted
Document Fee
2200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Handa Kundi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Store For Capacity To Store 100 Qt Bhusa With Shutter For Cattle Sanctuary At Village Handa Khundi , Nalagarh , Distt . Solan ( H . P ) .
BOQ
| Name of Work: CONSTRUCTION OF STORE FOR CAPACITY TO STORE 100 Qt BHUSA WITH SHUTTER FOR CATTLE SANCTUARY AT HANDA KHUNDI, NALAGARH, DISTT. SOLAN (HP) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundations, trenches etc. in earth work, in all kind of soil lift upto 1.50mtr stacking the excavated soil in all distance. Clear from the edge of the excavation & then returning the stacked soil in 15cm layers when required into plinths, sides of foundations etc. consolidating Nos. deposited layers by rammeing and watering & then disposing of all surplus excavated earth as directed within all leads and lifts and as per direction of the Engineer-in-Charge. | 87.7 | Cum | |
| 2 | 2 | Providing & laying cement concrete 1:4:8 (1cement :4sand :8 graded stone aggregate 40mm nominal size) and curring complete excluding the cost of form work in foundation and plinth including carriage of material within all leads and lifts. | 10.4 | Cum | |
| 3 | 3 | Providing & laying cement concrete 1:6:12 (1cement :6sand :12 graded stone aggregate 40mm nominal size) and curring complete excluding the cost of form work in foundation and plinth including carriage of material within all leads and lifts. | 32.7 | Cum | |
| 4 | 4 | Filling in plinth with sand under floors including watering and consolidating upto all lead and lifts. | 30 | Cum | |
| 5 | 5 | Boulder/ stone soling hand packed i/c filling interstics with spells and sand including watering and ramming complete including carriage of material within all leads and lifts.. | 32.7 | Cum | |
| 6 | 6 | Randum rubble masonry/polygonal rubble masonry (uncoursed/brought to course) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 sand: 12 graded stone aggregate 20 mm nominal size) at plinth in cement mortar 1:6 (1 cement: 6 sand) including carriage of material within all leads and lifts. | 23.26 | Cum | |
| 7 | 7.01 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30 x 30 x 5mm so as to give a fair finish including centering, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centering below supporting floor to ceiling in all height and removal of the same for in-situ reinforced concrete and plain concrete work in including carriage of material within all leads and lifts.:- a) Foundation, footings basis of columns etc. and mass concrete. | 17.76 | Sqm | |
| 8 | 7.02 | b) Columns, pillars, posts and struts, Square, rectangular or polygonal in plan. | 130.68 | Sqm | |
| 9 | 7.03 | c) Beams, cantilevers, girders and lintels, sides of soffits of beams, beam hunching, cantilevers, bressumers and lintels not exceeding 1mtr. In depth in all heights from floors. | 152.39 | Sqm | |
| 10 | 8.01 | Providing and laying cement concrete M-20 stone aggregate 20mm nominal size cement miniumum 400.00 Kg per Cum and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- a) Foundation, footing bases of columns and the like and mass concrete. | 14.4 | Cum | |
| 11 | 8.02 | b) Columns, pillars, posts and struts upto floor two level. | 14.74 | Cum | |
| 12 | 8.03 | c) Suspended floor, roofs, landing and shelves and their supports balconies beams, girders, bressumers and cantilever upto floor two level. | 18.76 | Cum | |
| 13 | 9 | Providing mild steel/tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level. Tor steel. | 72.02 | Qtl. | |
| 14 | 10 | Providing brick work using common burnt clay building bricks in super structure above level upto floor two level in cement mortor 1:6 (1cement : 6sand).in Ist class bricks. | 57.5 | Cum. | |
| 15 | 11 | 15mm cement plaster in single coat on fair side of brick/ stone/concrete walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortor 1:6(1cement :6sand). | 356.43 | Sqm. | |
| 16 | 12 | 15mm cement plaster in single coat on rough side of brick/ stone/concrete walls for interior plastering upto floor two level including arrises internal girth and finished even and smooth in cement mortor 1:6(1cement :6sand). | 290.5 | Sqm | |
| 17 | 13 | Providing and fixing glass strips in joints of terrazo floors/ cement concrete floors. 40mm wide and 4mm thick. | 350 | Mtr | |
| 18 | 14 | Cement concrete flooring 1:2:4 (1cement: 2 sand: 4graded stone aggreate 20mm nominal size) laid in one layer finished with a floating coat of neat cement. 50mm thick | 219.27 | Sqm. | |
| 19 | 15 | Steel work welded with built up sections, trusses and framed work including cutting hoisting, fixing in position & applying a priming coat of red lead paint. a) In trusses and trussed purlins in building. | 50 | Qtl. | |
| 20 | 16 | Providing & fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted irom J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washer complete with all accessories as required as per the direction of Engineer-in-charge. | 264.86 | Sqm. | |
| 21 | 17 | Providing & fixing ridges or hips 60 cm overall with 0.60 mm thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the Engineer-in-charge. | 21.36 | Rmt. | |
| 22 | 18 | Providing and fixing M.S. round holding down or anchor bolts with nuts and washers complete. | 0.47 | Qtl. | |
| 23 | 19 | Supplying & fixing rolling shulters of approved make made of 80mm x 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft, with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover & spring shultres having width 3.5 meters and above. | 24.75 | Sqm | |
| 24 | 20 | providing and fixing ball bearing for rolling shutters. | 3 | Each | |
| 25 | 21 | providing and fixing 27.5 cm long wire spring grade No. 2 for rolling shutters. | 4 | Each | |
| 26 | 22 | Providing mechanical device chain and crank opration for oprating rolling shutter. Rolling shutter operated by bevel gear box and crank handle exceeding 12.0 sq.m. and upto 25.0 sq.m in area. | 24.75 | Sqm | |
| 27 | 23 | Providing and fixing top cover for rolling shulters. Shulters having width 3.5 metre and above. | 5.7 | Mtr. | |
| 28 | 24 | Appling priming coat over new steel & other metal surfaces after & including preparing the surface by thoroghly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. With ready mixed priming paint brushing red lead, Red-oxide/zink oxide chrome. | 250.12 | Sqm | |
| 29 | 25 | Painting two coats(excluding priming coat) over new steel and other metal surface either enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. Enamel paint other than white. | 259.12 | Sqm | |
| 30 | 26 | Applying one coat of Acrylic primer (spectrum or equivalent of superior quality) on new concrete/maasonry/ plastred surfaces after & i/c preparing the surface by thoroughly brushing the surface free from mortor droppings & other foreign matters, sand papering the surface smooth complete. | 646.93 | Sqm | |
| 31 | 27 | Applying birla white wall care putty over plaster surface after throughtly brushing the surface free from mortat droops,dust, loose material and other foreign matters sand appered smooth give final matter finish to the surface complete. | 646.93 | Sqm | |
| 32 | 28 | White washing with lime on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter. | 290.5 | Sqm | |
| 33 | 29 | Finishing wall with weather proofing exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (2 coats) to give an even shade and final finish after throughly cleaning the suface to remove all dirt, dust & other foreign matter etc. i/c sand paper smooth complete. | 356.43 | Sqm. | |
| 34 | 30 | Making plinth protection with 50mm thick in cement mortrar 1:3:6 (1cement : 3sand : 6 stone aggregate) under layer 75 mm thick (unconsolidated) bed of dry brick/ stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground as per instructionof the Engineer-in-charge. | 44.84 | Sqm | |
| 35 | 31 | constructing course rubber hammer dressed U shape open surface drains with side wall 15x22 cm in cement mortar 1:6( 1 cement : 6 sand ) and inside plastering with cement plaster 1 : 3 ( 1 cement : 3 sand ) including earth work and laying 10cm cement concrete in 1 : 5 : 10 ( 1 cement : 5 sand :10 graded stone aggregate ) of 40mm nominal size) and 7.5 cm cement concrete 1 : 2 :4 ( 1 cement : 2 sand :4 graded stone aggregate ) of 20mm nominal size) and finished with a floating coat of neat cement complete as per slandered design. | 52.86 | Mtr. | |
| 36 | 32 | providing and fixing 15cm wide 45cm. Overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts ans washers etc. including making necessary connections with rain water pipe complete as per design. a)0.63mm thick sheet | 44.2 | Rmt. | |
| 37 | 33 | Providing and fixing on wall face PVC (D-Plast).rain water pipes of working pressure not less than 4.5kg/Sqm. Including filling the joints with approved adhesive complete. 100mm dia pipes. | 24.8 | Rmt. | |
| 38 | 34 | Providing and fixing wall face PVC (D-Plats). accessories for rain water pipes including filling the joints with approved adhesive complete. a) PVC.Plain bend. 100mm nominal size. | 12 | Nos. | |
| 39 | 35 | Providing and fixing M.S.holder bat clamps of approved design to C.I. ort S.C.I pipes embedded in and including cement concrete blocks 10 x 10 x 10cm of 1:2:4 mix (1cement :2sand: 4graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall etc.100mm diameter. | 16 | Each | |
| 40 | 36 | Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel section joints mitred and welded with 16 x3.15 mm lugs 10cm long embeded in cement concrete blocks 15cm x 10 x 10 cm size of 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings i/c providing and fixing of glass pans with glazing clips and special metal sesh putty of approved make complete i/c priming coat of red lead paint. (a) Top hung Ventilators. | 9 | Sqm |
AI Tender Summary
Tender Timeline
Aug 08, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 22, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender