Haryana Urban Development Authority-HUDA has published Replacement Of Steel Tubular Poles With Gi Octagonal Poles On Dividing Road Between Sector 1-2 ,Replacement Of 2X250 Watt Sodium Fittings With Led Flood Lights Of 12.5 Long Hm On D/R 1-3P And Replacement Of 2X400 Watt Sodium Fitting With Led Flood Light F. Submission Date for this Tender is 20-08-2019. Halogen Light Tenders in ROHTAK Haryana. Bidders can get complete Tender details and download the document.
| Name of work: - Replacement of Steel tubular poles with GI Octagonal poles on Dividing Road between sector 1-2 ,replacement of 2x250 watt sodium fittings with LED Flood lights of 12.5 long HM on D/R 1-3P and replacement of 2x400 watt sodium fitting with LED Flood light fittings of 20 Mtr HM in Harit Watika, sector -1, HSVP Rohtak with all associated work including 3 years defect liability period of LED street lights (on site replacement) free of cost and maintenance & ON/OFF free of cost. A/C Rs 12.10 Lakh | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | 31.68(iii)\nSupply and Erection of Hot Dip Galvanized octagonal pole of 3mm thickness with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door sliding locking arrangement. Terminal plate consisting of 2 Nos. 100 A, 4 poles natural links including connection etc. with suitable connecting arrangement for 2 No. MCBs/ Kit Kat including cost of R.C.C 1:1 5:3 for foundation of size 0.7M x 0.7 M x 1.8 M with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.\nMake: Bajaj / Philips/Utkarsh/BPP\n9 Mtr. Long pole with top dia 70mm and bottom dia 155 mm with base plate of size 260x260x16mm | 21 | Each | |
| 2 | 2 | 31.9(ii)(d)\nSupply and erection of PVC copper insulated and sheathed 3-core circular flexible wire.\nSize 1.50 sqmm (48 / 0.20mm).\nMake: Polycab, Havells, CCI. | 550 | Mtr. | |
| 3 | 3 | 31.22(ii)\nExtra for using salt and charcoal / coke for pipe earth electrode as required | 10 | Each | |
| 4 | 4 | 31.22(ii)\nExtra for using salt and charcoal / coke for pipe earth electrode as required | 10 | Each | |
| 5 | 5 | 31.22(xv)\nPdg. and fixing 25 mm x 5mm G.I. Strip on surface or in recess for connection etc. as required with all labour and material | 50 | Mtr. | |
| 6 | 6 | 31.22(vii)\nSupplying and laying of 6 S.W.G. G.I. wire at 0.50 meter below ground level as conductor earth electrode including thimbles, soldering etc. as required | 700 | Mtr. | |
| 7 | 7 | 31.67(i)\nSupply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.\nHDPE pipe 63/50 mm outer dia/inner dia.\nMake: REX/Polypack/Diplast/AKG\n | 600 | Mtr. | |
| 8 | 8 | 31.26(xli)\nSupply and erection of underground cable, loose in existing pipe or trenches complete with necessary connections.\n25 Sq. mm 4 Core Cable (armd).\nMake: - Polycab/Havell/ CCI\n | 2800 | Mtr. | |
| 9 | 9 | 31.33(ii)\nSupply and erection of Godrej Almirah type M.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars. The top covering should have downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof. The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embedded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:-\nM.S. pedestal of size 750 mm wide, 900 mm high, 300 mm deep and bottom totally open, duly embedded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster, having a base of size 1050 mm x 600 mm x 250 mm below ground level. | 1 | Each | |
| 10 | 10 | 31.12©(ii)\nS/E of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.\nMake: Havells/L&T/Indo-Asian\n100 amp. to 220 amp., 10 kA, 3-phase. 415 V.\n | 1 | Each | |
| 11 | 11 | 31.17a)(i)\nSupply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections.\nMiniature circuit breakers of 9 KA breaking capacity.\nMake: Havells/L&T/Indo-Asian\n0.5 amp. to 4 amp. (SP) | 48 | Each | |
| 12 | 12 | (ii)6 amp. to 32 amp. (SP) | 6 | Each | |
| 13 | 13 | 31.35(ix)(j)\nSupply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work\n25sqmm | 490 | Each | |
| 14 | 14 | App. Item\nSupply & erection of 120 watt LED street light luminaire with multiple highly efficient & high power LED light with individual lens, pressure die cast aluminium housing, reflector and enclosed with toughened glass, IP-66 level, having 120 lumens/watt (as per Technical specifications attached at Annexure) of make: Bajaj- BRTFEG120WLED i.e. Cool white or equivalent make of Philips, GE/LT, Polycab, with 3 years defect liability period (on site replacement) free of cost, complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. | 4 | Each | |
| 15 | 15 | App. Item\nSupply and erection of 63 Amps, 415 volt, 3-phase connection plate for in-coming & out-going cable in S/L panel/octagonal pole fixed on bakelite sheet complete with nut & bolts complete in all respect upto the entire satisfaction of Engineer-in-charge | 23 | Each | |
| 16 | 16 | App. Item\nLaying of HDPE pipe 1 mtr. below ground level using trenchless technology including cost of DWC HDPE pipe for laying of underground electrical cables complete in all respect upto the Entire satisfaction of Engineer-in-Charge.\n(i)HDPE pipe 63/50 mm OD/ID\nMake: REX/Polypack/Diplast/AKG\n | 50 | Mtr. | |
| 17 | 17 | App. Item\nS/E of 300 Watt LED Flood light luminaries of 300W LED with multiple LED with highly efficient high power LED light with lens, pressure die cast aluminum housing, reflector and enclosed with toughened glass, IP-66 level, having more than 120 Lumens/watt complete in all respect (as per Technical specifications attached at Annexure). \nMake:- Philips /Bajaj/ GE/LT Equivalent specification of. | 9 | Each | |
| 18 | 18 | App. Item\nS/E of 200 Watt LED Flood light luminaries of 200W LED with multiple LED with highly efficient high power LED light with lens, pressure die cast aluminum housing, reflector and enclosed with toughened glass, IP-66 level, having more than 120 Lumens/watt complete in all respect. (as per Technical specifications attached at Annexure).\nMake:- Philips /Bajaj/ G.E. Equivalent specification of LT | 6 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
