| 1 | 1 | Providing the detail drawing and design with execution of office modular system with dismantling the exsting strusture with details of materials and executing the job along with supply of all material, labour, T&P on Turnkey basis with all fittings electrical installation, flooring with vitrified tiles, partition, tables gypsum board false ceiling, executive chairs as per the below detailed scope of work etc. complete as per direction of Engineer-in-charge .(Excluding cost of GST). NB: The SD amount of be kept withheld up to completion of warrenty period for the above item and will be released after 03 years. In between the warrenty period any defect found in the work should be repaired / replacement by the agency at his own cost. All items should be approved by competent authority. | | 56.25 | Each Sqm. |
|---|
| 2 | 1.01 | NB: The agency has to provide the design and drawing with execution cost. Authority has the liberty to accept or reject the design. The Agency may quote his rate after detail site inspection. The maintenance period/ warranty period on fixture will be three years. The agency may quote their rate accordingly. The area may increase or decrease depending on the requirement. | | | |
|---|
| 3 | 1.02 | SCOPE OF WORK PROVISION FOR CIVIL WORKS FULLY HEIGHT PARTITION (SOLID). Providing and fixing in position fully solid full height Partition work as per drawing ,in frame work at 2’x 2’ grid (horizontally and vertically) comprising of 2 ½”.x1 ½” heavy gazed almunium section (not less than 2 mm thick) and/or as per requirement in the site with 6 mm plywood( BWR) on both sides finished with 1 mm thick laminates of approved shade and colour in one side & two coat of plastic paint over one coat of primer on inner side .All exposed T.W. surfaces to be finished in melamine polish of matching laminate colour as directed including all necessary Stainless Steel finish fittings/hardware & wood preservative paint etc. as per approved material and as approved. | | | |
|---|
| 4 | 1.03 | FULLY HEIGHT PARTITION (SEMI GLAZED). Providing and fixing in position partly glazed full Partition work as per requirement ,in frame work at 2’x2’ grind (horizontally and vertically) comprising of 2 ½”x1 ½” heavy gazed aluminum section (not less than 2mm thick) as per frame work with 6 mm plywood (BWR) on both sides finished with 1 mm thick laminates of approved shade and colour. 12mm glass with etching and frosting fitted with stainless steel (SS) finished patch panel and 2”x2” Teak Wood member for door sides and glass sides and T.W. door frame. All exposed T.W. surfaces to be finished in melamine polish of matching laminate colour as directed including all necessary Stainless Steel finish fittings/hardware and wood preservative paint etc. as per approved material and as approved. | | | |
|---|
| 5 | 1.04 | DOOR WORK DOOR (SEMI GLAZED) Providing & fabricating fixing door shutter with 28mm x 75mm height & rails respectively by using Giringa/ Kasi wood of well seasoned with necessary wood joining, planning, polishing etc., with matching the aligned partition . The shutter will have part glazed 8mm thick float glass side beveled , high polished with body itching of globain & part solid one covered with 6mm Boiled Water Resistant ply, both sides covered with 1 mm thick laminate of approved shade with necessary wood beading etc mat polished with melamine polish of asian or equivalent , complete to match the aligned partition elevations designs, the rates are inclusive of cost of necessary hinges, handles, Godrej make night latch, aldrops etc., all labour, materials, taxes, leads & lift to the place of work executed to the satisfaction of the Engineer-in-charge. | | | |
|---|
| 6 | 1.05 | DOORS GLAZED Providing and fixing twin,- stile door made of 32 mm thick well seasoned teak wood of special design for top and bottom stiles, fixed, portion with 8mm thick clear float glass and open able portion with 12mm thick etching glass with PPT logo frosted design with necessary sand blasting/granular blasting to be provided and edge should be machine beveled polished glass, necessary hardware fixtures of approved make and design, viz. double action floor spring, brass flush bolt. Stain finish stainless steel decorative handle (approx. 300mm long) on both faces, complete as per approved drawing and instructions. Wooden surfaces shall’, be polished in approved shade Night Catch lacquer in mat satin finish. The work to be completed as per design and specification all complete. | | | |
|---|
| 7 | 1.06 | DOOR CLOSER Providing and fixing heavy duty Godrej make over head door closers in door with necessary fixtures and fittings etc. | | | |
|---|
| 8 | 1.07 | FLOOR SPRING Providing and fixing Godrej make heavy duty floor spring in entrance door with necessary fixtures and fittings etc. | | | |
|---|
| 9 | 1.08 | CEILING WORK FALSE CEILING False Ceiling (Gypsum Board) Providing & fixing in position false ceiling in Gypsum board 12 mm thick for horizontals & Verticals fixed over G.I. frame work as specified by India Gypsum Co. Ltd. including trap doors for A.C. Unit in 18 mm thick Marine Grade Plywood with Stainless Steel hinges & locks with moulding 1” x 1” for edges including finishing with White Plastic Emulsion Paint etc. complete in all respects. (Note: - Only the plan area will be measured for payment. No extra payment will be made for cutouts, grooves, mouldings etc.) | | | |
|---|
| 10 | 1.09 | FURNITURE WORK FRONT OFFICE / DAK / ISSUE SECTION Providing and fixing of counter table top of 2'-9\" wide and front drawer unit consisting 3 Nos of drawer units slides on telescopic slider made up of 19mm thick ply with locking arrangement. The exposed edge surfaces are to be finished with 1.0mm thick laminates as per design of approved shade and the inner surface is painted with two coat of enamel paint of approved colour over one coat of primer, completed with all labour and material including all the hardware required. (All plywoods for furniture should be BWR ply.) | | | |
|---|
| 11 | 1.1 | Cashier Counter:\nProviding and fixing of counter table top of 2'-9\" wide and front drawer unit consisting 3 Nos of drawer units slides on telescopic slider made up of 19mm thick ply with locking arrangement. The exposed edge surfaces are to be finished with 1.0mm thick laminates as per design of approved shade & the inner surface is painted with two coat of enamel paint of approved colour over one coat of primer & cable manager are to be fixed. It also include a 12mm th. fully each & edge polished 15\" wide horizontal glass member fixed with the partition by SS patch panel and a vertical 12mm th fully each glass member from table top to horizontal glass member fixed with SS patch panel. The work is to be completed with all labour and material including all the hardware required.\nSitting Arrangement:\n\n | | | |
|---|
| 12 | 1.11 | Providing approved and required Nos. of modular executive type chairs & tables as well as sitting arrangements of a front drawer unit consisting 3 Nos. of drawer units slides on telescopic slider made up of 19mm thick ply (BWR) with locking arrangement. The exposed edge surfaces are to be finished with 1.0mm thick laminates as per design of approved shade and the inner surface is painted with two coat of enamel paint of approved colour over one coat of primer. The side credenza will have two drawer unit slides on telescopic slider and two cupboard unit. The work should be completed including all labour and material. | | | |
|---|
| 13 | 1.12 | Sitting Arrangement:\nProviding approved and required Nos. of modular executive type chairs & tables as well as sitting arrangements of a front drawer unit consisting 3 Nos. of drawer units slides on telescopic slider made up of 19mm thick ply (BWR) with locking arrangement. The exposed edge surfaces are to be finished with 1.0mm thick laminates as per design of approved shade and the inner surface is painted with two coat of enamel paint of approved colour over one coat of primer. The side credenza will have two drawer unit slides on telescopic slider and two cupboard unit. The work should be completed including all labour and material.\n | | | |
|---|
| 14 | 1.13 | CPU Trolley:\nProviding and supplying mobile metal CPU trolley manufactured by M/s Godrej / EBCO attached with 4 wheels for holding CPU and for its smooth movement\nNotice Board:\nProviding soft board covered with approved fabric with wooden frame work and decorative beading for display Notice, drawings and documents, with locking arrangement of the sliding shutter made up of 8mm thick flat glass. The work should be done including all labour and material.\n | | | |
|---|
| 15 | 1.14 | Storage Room: Providing and fixing of low height storage cabin having 450mm. depth of made out of 19mm thick BWR Ply.The exposed surface is to finished with 1.0mm thick laminates as per design of approved shade and the inner surface is painted with two coat of enamel paint of approved colour over one coat of primer surfaces are to be finished with as per design The work should be completed according to approved drawing and design including all labour and materials. | | | |
|---|
| 16 | 1.15 | Key board tray:\nProviding and supplying metal Keyboard tray without Mouse pad . The keyboard is a pullout type, fixed to channels and screwed to below table top.\n | | | |
|---|
| 17 | 1.16 | Vertical blinds:- Providing and fixing of approved colour vertical blind 100mm wide of matrix on the windows complete job including top rail bolt, chairs and weights etc. as per direction of Engineer-in-charge. \n\n | | | |
|---|
| 18 | 1.17 | Providing & applying 2 coats of plastic emulsion paint of royale ICI dulux & approved shade on wall, columns, beams, ceiling, etc. including preparation of surface, sand papering the intermediate coats, including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, T&P, etc., as per direction of Engineer-in-charge. | | | |
|---|
| 19 | 1.18 | Wall Putty work.\nProviding and applying wall putty work punning in order to make the total plastered wall surface and painting with plastic emulsion paint with oil paint if necessary perfectly leveled, including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, T&P, etc., as per direction of Engineer-in-charge.\n | | | |
|---|
| 20 | 1.19 | Over head Storage Cover.\nProviding and fixing of over head storage cover openable shutter made out of 19mm th. block board .The exposed surface is to finished with 1.0mm thick .laminates as per design of approved shade and the inner surface is painted with two coat of enamel paint of approved colour over one coat of primer surfaces are to be finished with as per design .The work should be completed as per direction of Engineer-in-charge including all hardwares, labour and materials.\n | | | |
|---|
| 21 | 1.2 | Flooring:\nVITRIFIED FLOORING :\nProviding and fixing of full body vitrified tile (Somany/Jonshon/Kajaria) over existing floor with chipping/dismantalling the surface as per requirement of first quality/approved quality shade and colour with homogenous body of size 600 mm x 600 mm having modulus of rupture as per ISI specification and modulus of hardness 8.0 with variation in size less than 0.05% in approved colour, design and size in cement mortar bedding avg. 40 mm thick. in C:M 1:4 with neat white cement slurry fixed in correct line, level in approved design and pattern. The maximum variation from the stated size other than thickness shall be 0.2 mm, including pointing the joints with matching colour cement, cleaning the surface, curing, acid cleaning the tile work, etc., all complete as per directions of the Engineer-in-Charge. The contractor has to take care of the laid flooring against any damages during the complete progress. If required and necessary the contractor has to cover the newly laid flooring by POP paste with a plastic sheet. The item also includes skirting and inlay. All complete as per approved drawing and details or as directed as per the instructions of Engineer – in -charge. \n | | | |
|---|
| 22 | 1.21 | ELECTRICAL & DATA CABLING WORK \nRecess conduit wiring to light, ceiling fan, exhaust fan points with (2x1.5 sq mm + 1(1x1sqmm ) PVC single core copper wire in PVC/ Super polythene pipe with galvanized iron junction & switch boxes & clip in type 6 Amp modular type switches with all accessories, T&P & as directed by the Engineer-in-Charge.\n1. Primary (I light/fan controlled by one switch )\n2. Secondary point (2 lights controlled by 1 switch)\n3. Wall fan point (controlled by 1 switch and one 6 Amp Socket)\n(Before fabrication of panel board drawing is to be approved by Engineer-in-charge).\n | | | |
|---|
| 23 | 1.22 | B.COMPUTER WIRING\nSupply of all required materials and wiring to circuits/ sub-mains with following number and sizes of PVC insulated 1100 volt grade standard copper wire run inside pre-laid PVC conduit pipe of ISI mark as required and copper wire as earth continuity conductor and complete in all respect including making good to all damages caused and as per the direction of Engineer-in-charge.\n | | | |
|---|
| 24 | 1.23 | C. MAIN PANEL BOARD\nSupply, delivery, installation, testing, commissioning, of L&T indoor wall, floor , mounted , type distribution boards made out of 2 mm thick. CR sheet metal duely acid treated premised & painted with 2 coats of enamel paint compartment arrangement for each equipment & bus bar chamber on the top of the panel running horizontal through out its length duly lamp , vermin proof having provision cable by conduit entry , earthling as per specification mentioned below duly factory wired confirming to the relevant IS & as per special condition of contract , making good the damages M.S. Cubical type Panel board should have hinged door at the front. The panel shall be provided with all accessories complete in all respect & direction of EIC (Before fabrication of panel board drawing is to be approved by Engineer-in-charge).\n | | | |
|---|
| 25 | 1.24 | D. FITTINGS OF FIXTURES\nSupply, installation and testing of recess lights mirror optics fittings (2x36wt)of size 2'-0\"x2'-0\" with all accessories complete assembly of Philips as required as per direction of Engineer in charge.\nSupply, installation and testing of spot light mirror optics, fittings (1x18wt) with all accessories complete assembly of Philips ) as required as per direction of Engineer in charge.\nSupply, installation and testing of single tube lights patty fittings (1x36wt) of surface mounting with all accessories complete assembly of Philips as required as per direction of Engineer in charge.\n | | | |
|---|
| 26 | 1.25 | E. PHONE WIRING :\nSupply of all required materials & laying of the following sizes of phone wires of approved make inside the approved size PVC conduit complete in all respect as per instruction of EIC .2 pairs telephone wires\nSupply, fixing, testing of phone point with suitable GI boxes with phone, socket complete in all respect as per direction of EIC. \n | | | |
|---|
| 27 | 1.26 | F. DATA WIRING:\nSupply, fixing of all required cat – 6 LAN wiring of D Link. in PVC pipe (keeping precaution to keep wiring at least 1’ from electrical wiring) as per direction of EIC .\n | | | |
|---|
| 28 | 2 | Supplying, fitting & fixing of Gypsum board false ceiling with GI frame, stay, hook, nut, bolts including fixing of board, nylon tape oner joints & making putty over it & finishing with supply of all materials, labour, T&P, taxes, transportation, etc. all complete as per the direction of Engineer-in-charge (Excluding cost of GST). | | 74 | Each Sqm. |
|---|
| 29 | 3 | Supplying ,fitting,fixing & laying of 2mm thick Vinyl flooring with Glue for pasting with prepare the floor surface and level the floor before laying Vinyl with supply of all labour, materials ,T&P,all taxes, transoportation charges etc. complete as per direction of Engineer-in-charge. (Excluding cost of GST). | | 71.88 | Each Sqm. |
|---|
| 30 | 4 | Dismantling and removing the existing damaged cement plaster and replastering the same with 12mm thick CP(1:6) with required staging, scaffolding, cleaning the debrises including all leads & lifts, curing, transportation charges with supply of all labour, material, T&P, all taxes, etc. complete as per direction of Engineer-in-charge. (Excluding cost of GST). | | 142 | Each Sqm. |
|---|
| 31 | 5 | Painting two coats to the wall face with Plastic Emulsion paint ( asian paint royal/ berger easy clean fresh) of approved quality & shade over a coat of primer including scraping, sand papering, cleaning the surface walls with supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding charges at any height, etc. complete as per direction of Engineer-in-charge.( Excluding cost of GST). | | 331.8 | Each Sqm. |
|---|
| 32 | 6 | Supplying, fitting & fixing of 75mm thick Gypsum board Partition with GI frame as specified by Indian Gypsum Co. Ltd. and both the side of the G.I frame will be covered with 12mm. thick Gypsum board stay, hook, nut, bolts including fixing of board, nylon tape on joints & making putty over it & finishing with supply of all materials, labour, T&P, taxes, transportation, etc. all complete as per direction of Engineer-in-charge..( Excluding cost of GST). | | 94.2 | Each Sqm. |
|---|
| 33 | 7 | Supplying of approved premium quality of water based wall Putty of required quantity to department and applying the same by receiving from departmental store to internal wall surface after Scrapping the old damaged paint thoroughly, cleaning and prepared the wall surface including supplying of materials cleaning, brushing, removing the flakes and finishing smooth the wall surface by applying putty including all cost, supply of materials, labour, T&P, scaffolding, transportation from store to site etc. all complete for all the floors as directed by Engineer-in-charge.(Excluding GST) NB:- After cleaning and scrapping a clearance certificate must be obtained from competent authority before use of priming coat. | | 331.8 | Each Sqm. |
|---|
| 34 | 8 | Supplying, fitting, fixing fully glazed aluminum window/ventilator shutters of openable/slidding made out of allunimum section ( slidding section:- 151-154,151-155 as window frame section No.151-155,151-153 and 151-167 as shutter frame with 5mm thick colour/ black/ forsed /pinheaded galss filled with rubber bedding including lucking arragement/ openable section:-Alluminium framed openable windows using 15 micron anodize OEL alliminium section 2082 as out section ,9139 as mullion section ,4124 as shutter section frame with tappred clip section 4125 alluminium angle rubber bidding ,friction stay and angle with 5mm thick colour/ black/ forsed /pinheaded galss of with anodized aluminum section of thick as per approved design as per relevant IS specification, all finished including cost & supply of all materials, labour, T&P, all taxes , transportation charges, staging, scaffolding, etc. complete as per direction of Engineer-in-charge. ( For all floors) (Excluding GST) | | 12.96 | Each Sqm. |
|---|
| 35 | 9 | Providing and applying of 3mm thick A.P.P water proofing memberance black finished reinforced with non-woven polyster matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Lit./Sqm by the same membrane manufacturer of density at 25°C, 0.87-0.89 Kg./Lit. anf viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using butan torch and sealing all joints etc. and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under joint strength in longitudinal and transverse direction at 23°C as 650/450N/5CM tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto-2°C when tested in accordance with ASTM, D-5147 including of 100mm lapping after making the surface free form loose particles, oil grease, fungus or any other contaminantes and painting two coats of aluminum paint over the membrane including cost and supply of all complete as per the dorection of Engineer-in-charge. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane. (Excluding Cost of GST). NB: The warrenty period for the above item is 05 years of the payment will be released after completion of the work and balance 5% will be released after warrenty period. During the warrenty period any defects found that should be repaired / replacement of the agency at his own cost. | | 1350 | Each Sqm. |
|---|
| 36 | 10 | Providing and laying abrasion resistant full body vitrified tile of size (600 x 600)mm. of (SOMANY / KAJARIA / JOHNSON) or equivalent make with water absorstion less than 0.08% conforming to IS-15622 in all colours and shade; laid on avarage 20mm/40mm thick Cement Mortar (1:4) jointing with white / gray cement slurry @ 3.30Kg / Sqmtr. including grouting the joints with white cement and matching pigment etc. all complete with cost of labour, materials, T&P, transportation, cleaning the floor, etc. as directed by Engineer-in-charge. (Excluding cost of GST) . NB: The agency shall have to produce the manufacturs test certificate during supply of materials. | | 33.6 | Each Sqm. |
|---|
