Health And Family Welfare Department has published E Tender For Procurement Of Dental Items Used In Dentistry For Two Years From The Date Of Award Of Contract ( Aoc ). Submission Date for this Tender is 06-09-2019. Dental Materials Tenders in KOLKATA West Bengal. Bidders can get complete Tender details and download the document.
Name of Work: E TENDER FOR PROCUREMENT OF DENTAL ITEMS USED IN DENTISTRY FOR TWO YEARS FROM THE DATE OF AWARD OF CONTRACT (AOC) | |||||
---|---|---|---|---|---|
Sl. No. | Group-II | Cat. No. | Tentative annual requirment (Quantity based on Accounting Unit) | Accounting Unit | |
1 | 188 | 3rd Generation- Apex Locator\n\nSpecification:\n\nwith lip clip, colour display module, file clip & associated chord\nStandard packaging/physical verification of sample may be made | 1/DLVI | 27 | Single unit |
2 | 189 | 6th Generation- Adaptive Apex Locator\n\nSpecification:\n\nwith lip clip, colour display module, file clip & associated chord\nStandard packaging/physical verification of sample may be made | 2/DLVI | 11 | Single unit |
3 | 190 | Acryliser\n\nSpecification:\n\nfor 16 flasks or more Stainless steel lined both outside & inside. Temperature is controlled by thermostat from 5°C above ambient to 100°C with a sensitivity of +-5’C with timer can be set 1/2 Hour to 2 Hours.\ndrain valve is provided for dewaxing. To work on 220/230 volts Ac. | 3/DLVI | 23 | Single unit |
4 | 191 | Adam’s plier with tungsten carbide tip\n\nSpecification:\n\nFor orthodontic work. \n | 4/DLVI | 70 | Single unit (PC) |
5 | 192 | Adam’s plier\n\nSpecification:\n\nFor orthodontic work. Made of hard tempered steel | 5/DLVI | 200 | Single unit |
6 | 193 | Adson Forceps, Toothed\n\nSpecification:\n\n1.5mm × 2.75mm 1×2 Teeth. 46mm Handle. Made of stainless steel | 6/DLVI | 50 | Single unit |
7 | 194 | Adson’s forceps non toothed\n\nSpecification:\n\nof length 12.5 cm Made of stainless steel\n | 7/DLVI | 50 | Single unit |
8 | 195 | Air polisher\n\nSpecification:\n\nair-driven dental air polishing unit withreservoir hand held with connection to dental chair unit.\n sterilizable up to 275°F (135°C), 44 psi. | 8/DLVI | 14 | Single unit |
9 | 196 | Aluminum slide trays\n\nSpecification:\n\nMade of aluminum\nTray dimensions: 11.25 x 7.25 x 0.25 in.Holds 20 each of 25 x 75 x 1mm slides | 9/DLVI | 160 | Single unit |
10 | 197 | Amalgam carrier \n\nSpecification:\n\nMade of stainless steel | 10/DLVI | 150 | Single unit |
11 | 198 | Amalgam plugger\n\nSpecification:\n\nMade of stainless steel double ended | 11/DLVI | 150 | Single unit |
12 | 199 | Amalgamator with plunger\n\nSpecification:\n\n• Input voltage 220-230V\n• Provided with Touch pad selector\n• Pre-programmed time setting\n• Quiet, high-speed mix capsules\n• Built-in automatic timer\n• Capsule holder accepts all types of amalgam capsule\n• With plunger\n• Customized trituration times | 12/DLVI | 22 | Single unit |
13 | 200 | Anatomical articulator\n\nSpecification:\n \n1. Rust free construction. \n2.fixed condylar guidance with spring mounted elements that are attached to upper member\n3. incisal pin. 4. mid incisal pin\n5. orientation rod,6. incisal guide table\n7. Support upper & lower plaster cast | 13/DLVI | 190 | Single unit |
14 | 201 | ANTERIOR JACQUETTE\n\nSpecification:\n\nSet of three.( 1 pc straight & two pc curved)\nMade of High quality Stainless steel. | 14/DLVI | 170 | Set of three (Per SET) |
15 | 202 | Apexo elevators\n\nSpecification:\n\nSet of two Set of right & left Made of stainless steel. | 15/DLVI | 25 | Set of two |
16 | 203 | Austin’s retractors\n\nSpecification:\n\nL-shaped with one rounded end and one forked end \nMade of stainless steel | 16/DLVI | 34 | Single unit |
17 | 204 | Babcock’s forcep\n\nSpecification:\n\nfinger ring, ratcheted, non-perforating forceps used to grasp delicate tissue\nMade of stainless steel | 17/DLVI | 17 | Single unit |
18 | 205 | Band Contouring pliers\n\nSpecification:\n\nFor orthodontic work. Made of hard tempered steel | 18/DLVI | 59 | Single unit (PC) |
19 | 206 | Band cutting scissors\n\nSpecification:\n\nFor orthodontic work. \nMade of hard tempered steel | 19/DLVI | 59 | PC |
20 | 207 | Band pinching pliers set\n\nSpecification:\n\nSet of 1 piece each ofleft & right\nFor orthodontic work. Made of hard tempered steel | 20/DLVI | 59 | Unit set of 1 pc right & 1 pc left |
21 | 208 | Band pusher\n\nSpecification:\n\nFor orthodontic work. Made of hard tempered steel | 21/DLVI | 57 | Single unit (PC) |
22 | 209 | Band remover anterior & posterior\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 22/DLVI | 41 | Single unit (PC) |
23 | 210 | Band seater\n\nSpecification:\n\nFor orthodontic work. Made of hard tempered steel | 23/DLVI | 57 | Single unit (PC) |
24 | 211 | Binocular Compound Microscope\n\nSpecification:\n\nSharp Image Display with Excellent optical function, Small space occupancy with Integral Stand Design, Low Environment requirement with Anti-mould Technology.\nComfortable operation with Ergonomic Design Principle\nViewing Head: Compensation Free Binocular Head Inclined at 30o Interpupilary Distance 55-75mm\nEyepiece: Wide Field Eyepiece WF10x/18mm with Eye Guard, Achromatic Objective 4x, 10x, 40x, 100x,\nFocussing Range: Co-axial Coarse and fine adjustment Range 13mm fine division 0.002mm with tension control.\nNose Piece: Quadruple Nosepiece,\nStage: Double Layer Mechanical Stage 140 x 140 mm/ 75 x 50 mm N.A1.25 Abbe Condenser with Iris Diaphragm and Filter. \nFocussing: Coaxial Coarse & Fine Adjustment System Range 24mm, Fine Division 2mm\nIllumination: LED Light with Brightness Adjustable. ISO 13485 OR EC Certificate/directive 93/42/EEC) | 24/DLVI | 62 | Single unit |
25 | 212 | Block holders\n\nSpecification:\n \nTo be used to hold paraffin blocks and not made of plastic | 25/DLVI | 49 | Single unit |
26 | 213 | Blow torch\n\nSpecification:\n\nfor casting procedure:\nMade of non corrosive high fusing alloy \nProvided with air flow regulator, two separate inlet line for LPG gas & oxygen | 26/DLVI | 26 | Single unit with accessories |
27 | 214 | Boley Gauge\n\nSpecification:\n\nmade of stainless steel for measuring tooth dimensions & others. | 27/DLVI | 18 | Single unit |
28 | 215 | Bone expansion and splitting kit\n\nSpecification:\n\nthe kit consists of\nOsteotomes-set of 5-6 of various diameters\nSpreaders\n burs surgical for bone removal\n saw disc\n thumb driver & rachet\nautoclavable cassette 1 piece | 28/DLVI | 5 | instrument kit |
29 | 216 | Bone file Howard type \n\nSpecification:\n\nStraight or curved working ends \nTo smooth bone for better contour of alveolar ridge Crosscut or straight cutting ridges Double ended \nMade of stainless steel | 29/DLVI | 19 | Single unit |
30 | 217 | Bone file Miller type\n\nSpecification:\n\nDouble ended Made of martensitic stainless steel | 30/DLVI | 19 | Single unit |
31 | 218 | Bone Grafting Syringe \n\nSpecification:\n\nFor “Tamp and pack” method for placement of graft material into oral cavity. | 31/DLVI | 19 | Single unit (piece) |
32 | 219 | Bone rongeur end cutting \n\nSpecification:\n\nScissor-type handle, cutting edges on top edge of beaks Made of martensitic stainless steel | 32/DLVI | 19 | Single unit |
33 | 220 | Bone rongeur side cutting\n\nSpecification:\n\n Scissor-type handle, cutting edges on side and top of beaks | 33/DLVI | 19 | Single unit |
34 | 221 | Bone shear \n\nSpecification:\n\nLength 6-8inches.Made of stainless steel | 34/DLVI | 17 | Single unit |
35 | 222 | Boon’s gauge\n\nSpecification:\n\nHigh quality stainless steel framework with minimum\nmarking till 6mm | 35/DLVI | 27 | Single unit (PC) |
36 | 223 | Bracket debonding plier anterior\n\nSpecification:\n\n For Band removal orthodontic work. tungsten carbide tipped | 36/DLVI | 41 | Single unit (PC) |
37 | 224 | Bracket debonding plier posterior\n\nSpecification:\n\nFor Band removal in orthodontic work. tungsten carbide tipped | 37/DLVI | 41 | Single unit (PC) |
38 | 225 | Bracket holding tweezer\n\nSpecification:\n\nFor orthodontic work. Made of hard tempered steel | 38/DLVI | 57 | Single unit (PC) |
39 | 226 | Brass flask size no 6\n\nSpecification:\n\nfor acrylic denture fabrication by compression moulding, with detachable upper, body & lower member with keyways. Made of brass | 39/DLVI | 310 | Single unit |
40 | 227 | Buck knife\n\nSpecification:\n\nsize- ¾ & 5/6 For use in periodontal surgery | 40/DLVI | 3 | Single |
41 | 228 | Bur chuck for Dental lathe\n\nSpecification:\n\nof different shapes for attaching abrasive stone point, stone wheel & other attachments | 41/DLVI | 30 | Single unit |
42 | 229 | Buser bone chisel\n\nSpecification:\n\n6mm pointed tip Made of martensitic Stainless steel alloy | 42/DLVI | 77 | Single unit |
43 | 230 | CAMEL HAIR PAINTING BRUSH SIZE-04 | 43/DLVI | 200 | Single unit |
44 | 231 | Canine contouring plier\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 44/DLVI | 49 | Single unit |
45 | 232 | Casting ring extra large\n\nSpecification:\n\ncasting ring extra large\nMade of steel \nfor use with centrifugal casting machine \nLength 4" & Diameter x 4.75"or more | 45/DLVI | 13 | Single unit |
46 | 233 | Casting ring large \n\nSpecification:\n\nMade of steel \nfor use with centrifugal casting machine .\nLength3" & Diameter x 3.75" | 46/DLVI | 19 | Single unit |
47 | 234 | Casting ring medium\n\nSpecification:\n\nMade of steel for use with centrifugal casting machine .\nLength2" & Diameter x 2.75" | 47/DLVI | 19 | Single unit |
48 | 235 | Casting ring small\n\nSpecification:\n\nMade of steel for use with centrifugal casting machine .\nLength1.25" & Diameter x 1.75" | 48/DLVI | 19 | Single unit |
49 | 236 | Casting tong\n\nSpecification:\n\nMade of stainless steel or high fusing alloy for holding casting ring | 49/DLVI | 12 | Single unit |
50 | 237 | Castrovejo needle holder\n\nSpecification:\n\nCastroviejo Microsurgical Needle Holder is a double spring instrument used for holding small, delicate needles in various microsurgical procedures. It also features a locking mechanism.Made of stainless steel, autoclavable | 50/DLVI | 37 | Single unit |
51 | 238 | Castroviejo scissor\n\nSpecification:\n\nCastroviejo scissor has curved blades.\nUltra-sharp blades microscopic serrations provide a smooth cut.\nSpring-loaded knurled handles provide the control you need to make perfectly smooth cuts in delicate materials.\nstainless steel, autoclavable | 51/DLVI | 44 | Single unit |
52 | 239 | Cement mixing spatula\n\nSpecification:\n\nMade of stainless steel double ended | 52/DLVI | 150 | Single unit |
53 | 240 | Ceramic sculpturing & finishing kit\n\nSpecification:\n\ncomprising of high quality sable hair/ synthetic filament brush size one zero, two zero and four zero and other sizes, ceramic curver, mosquito forcep, tweezer, ceramic pallete for mixing ceramic powder and other associated carving & finishing instruments. | 53/DLVI | 7 | Single unit kit |
54 | 241 | Chandler chisel-with 5mm tip\n\nSpecification:\n\nwide single bevelled blade chisel\nMade of martensitic Stainless steel alloy | 54/DLVI | 77 | Single unit |
55 | 242 | Chanel retractor\n\nSpecification:\n\nlength 17.5 cm, Made of stainless steel | 55/DLVI | 17 | Single unit |
56 | 243 | Chin retractor Obwegeser type\n\nSpecification:\n\nlength 15.5 cm, Made of stainless steel | 56/DLVI | 15 | Single unit |
57 | 244 | Chisel curved\n\nSpecification:\n \nChisel curved 20mm \nMade of martensitic stainless steel | 57/DLVI | 15 | Single unit |
58 | 245 | Circular saw\n\nSpecification:\n\nfor dental model cutting: with self illumination\nProvided with motor driven circular saw blade and cast holding platform, electrically operated motor driven with push button type on off switches. | 58/DLVI | 11 | Single unit |
59 | 246 | Clinical micromotor-brushless\n\nSpecification:\n\nElectrically operated with handpiece\nhandpiece autoclavable upto 135 degree celcius, handpiece speed 1000-40000rpm, speed maximum output power 1.2W,3.4-3.5 Ncm torque,with option of clockwise & anticlockwise rotation.\n Control box and foot control mechanism. | 59/DLVI | 40 | Single unit with accessories |
60 | 247 | Colorado needle and accessories.\n\nSpecification:\n\nElectrosurgical needle is needle electrode for use in monopolar electrosurgical handpiece made of Tungsten Carbide. COAGULATION TIPS & CUTTING TIPSshould work with most of the diathermy units available in the hospital ,operating frequency above 3 MHZ.\nISO/FDA/CE 13485 OR EC Certificate(directive 93/42/EEC) | 60/DLVI | 3 | Single unit with accessories |
61 | 248 | Composite curing unit system\n\nSpecification:\n\nfor indirect composite work\nchamber provided with sliding tray, provided with multiple halogen or LED lights light intensity not less than 900 mW/cm2Output peak wavelength range 450 - 490 nm (intensity maximum at 460 nm)\ncapable of curing indirect composite veneers/inlays\n. Curing chamber dimension :\nLength 10 inches\nWidth 7 inches\nHeight 4 inches or more\nElectrically operated 220-230 Volts\nPortable with timer | 61/DLVI | 20 | Single unit with accessories |
62 | 249 | Cooley Bulldog Clamp\n\nSpecification:\n\nStraight 8.6cm jaw 4.7cm Made of stainless steel | 62/DLVI | 15 | Single unit |
63 | 250 | Coplin staining jar vertical type | 63/DLVI | 85 | Single unit |
64 | 251 | Crane Kaplan pocket marker \n\nSpecification:\n\nPair of two instruments –right & left | 64/DLVI | 26 | Pair |
65 | 252 | Crane Kaplan scaler\n\nSpecification:\n \n double-ended, round handled periodontal instrument for the removal of heavy supragingival calculus. It is a sickle type scaler, with a strong, rigid, sharply angled blade | 65/DLVI | 92 | PC |
66 | 253 | Crown gauge (Iwanson caliper)\n\nSpecification:\n\nfor measuring thickness of wax pattern, metal casting.\nBoth sided scale 0-10mm | 66/DLVI | 18 | Single unit |
67 | 254 | Crucible for small casting\n\nSpecification:\n\nMade of fused silica/ceramic material, capable of withstanding high temperature for use with centrifugal casting machine | 67/DLVI | 17 | Single unit |
68 | 255 | Curing pressure pot\n\nSpecification:\n\n5 liter or more capacity \npressure pot Temperature is preset to approximately 120°Fand manually adjusts to a maximum 160°F. \nSolid clad bottom provides even heat distribution. \nIncludes an easy-to-read, built-in pressure gauge and quick-release air valve.\nThe pot has a safety device to prevent overheating, and a secure double-locking lid. \nEasy-to-clean stainless steel interior. \nPot holder to keep pot firmly \nIn place. \nWith Lid Gasket | 68/DLVI | 8 | Single unit |
69 | 256 | Cushing Nerve Hook\n\nSpecification:\n\nused for the retraction of nerves or delicate tissue during neurosurgery. \nThe instrument has a ball tip to avoid tearing. This #1 hook is angled 90 degrees with a 4mm ball tip and overall length of 7-1/2 inches | 69/DLVI | 15 | Single unit |
70 | 257 | Dandy type Nerve hook\n\nSpecification:\n\n Length 16-20cm\nTip 4-5mm,deep working tip blunt ended made of stainless steel | 70/DLVI | 15 | Single unit |
71 | 258 | Dappen dish made of glass | 71/DLVI | 200 | Single unit |
72 | 259 | De La Rosa Wire Contouring Plier\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 72/DLVI | 38 | Single unit (PC) |
73 | 260 | Deans scissors: \n\nSpecification:\n\nScissors with 1 serrated angular blade used for trimming tissue or cutting sutures. | 73/DLVI | 9 | Single unit (piece) |
74 | 261 | Debackey’s forceps\n\nSpecification:\n\n Length 26 cm, tip width 1.5 mm Made of stainless steel | 74/DLVI | 17 | Single unit |
75 | 262 | Debackey’s vascular forcep 6”\n\nSpecification:\n\nMade of stainless steel, autoclavable | 75/DLVI | 15 | Single unit |
76 | 263 | DEBAKEY BULLDOG CLAMP 8.5CM\n\nSpecification:\n\nwith SERR.JAWS, Straight Made of stainless steel | 76/DLVI | 15 | Single unit |
77 | 264 | Dental dewaxing unit\n\nSpecification:\n\nwith digital control for water temperature regulation. Construction: Stainless Steel\nTank Sizes (300 x 200 x 350 mm) approximately\nWater Filling: Manual Heater: 2000 watts. With drain valve | 77/DLVI | 17 | Single unit |
78 | 265 | Dental excavator discoid type \n\nSpecification:\n\nMade of stainless steel double ended\nISO 13397-4:1997 | 78/DLVI | 100 | Single unit |
79 | 266 | Dental lathe motor\n\nSpecification:\n \nAc, HP-1, Universal, RPM-2800, Equipped with Double B.B, Single speed, Rating continuous with 3 chucks (Buffer, Stone & Bur Chuck), Three Imported B.B. flexible metal cable arm and its attachment. | 79/DLVI | 19 | Single unit |
80 | 267 | Dental muffle furnace\n\nSpecification:\n\n1150C degree Celsius, working temperature 900 degree Celsius, with ER & digital display\nMuffle Size 175x175x225mm. 4.0 k.w. capacity | 80/DLVI | 7 | Single unit with accessories |
81 | 268 | Dental phantom head unit\n\nSpecification:\n\nmanikin head fixed with a table, with mounted upper & lower jaw containing screw mounted teeth having 90° swiveling function of head unit, provided with control box for micromotor, foot control & micromotor with contra angle handpiece, should have mounted light unit with illumination power not less than 7000 LUX. | 81/DLVI | 270 | Single unit with accessories |
82 | 269 | Dental Plaster Dispenser\n\nSpecification:\n \nBody made of stainless 304 grade, fitted with digital electronic timer, capacity 5 kg or more. Will dispense premeasured dose of plaster at touch of a button. | 82/DLVI | 37 | Single unit |
83 | 270 | Dental Steam cleaner\n\nSpecification:\n\npower 1500W or more, 220V, frequency 50/60hz. Working Pressure: 4-5 bar. Capacity 5-10Litre. with thermostat controller.Device with both steam gun & button/lever controlled steaming attachment with steam regulator. Stainless steel non rusting inner tank body. | 83/DLVI | 11 | Single unit |
84 | 271 | Dental surveyor tool kit\n\nSpecification:\n\ntools- \nanalyzing rod multiple undercut gauges\n carbon marker sheath\n wax trimmer | 84/DLVI | 10 | Single unit |
85 | 272 | Dental surveyor Ney’s type\n\nSpecification:\n\nDental surveyor Ney’s type \nHorizontal Platform\n• Adjustable spindle for the vertical indicator \n• Survey table that can be locked at any angle.\nWith tools- analyzing rod undercut gauges\n carbon marker sheath\n wax trimmer etc\nProvision for holding micromotor handpiece \nStandard packaging/physical verification of sample may be made | 85/DLVI | 10 | Single unit with accessories |
86 | 273 | Dental Tweezer\n\nSpecification:\n\nwith horizontal serrations at tip, diamond knurling on the outside for good grip, Stainless steel alloy | 86/DLVI | 500 | Single unit |
87 | 274 | Dental Vacuum former machine\n\nSpecification:\n\nElectrically operated, with inbuilt vacuum motor suction unit, heating element with on off switches & adjustable clamping plate.\nSpecifications:\nVoltage : 230V/50-60Hz \nPower : 600W-230V \nHeater : 400W-230V \nDimension : L 23-25 cm, W 17-20 cm | 87/DLVI | 17 | Single unit with accessories |
88 | 275 | DG 16 endodontic explorer | 88/DLVI | 170 | Single unit |
89 | 276 | Diamond glass marker \n\nSpecification:\n\nMounted in aluminum pencil 5 inches (12.7cm) | 89/DLVI | 17 | Single unit |
90 | 277 | Die cutting machine\n\nSpecification:\n\nElectrically operated with diamond disc. \nWith adjustable model holder\nself illuminated chamber | 90/DLVI | 11 | Single unit with accessories |
91 | 278 | Dingmans retractor\n\nSpecification:\n\nwith three blades Made of stainless steel | 91/DLVI | 17 | Single unit |
92 | 279 | Distal end bender\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel) | 92/DLVI | 39 | Single unit (PC) |
93 | 280 | Distal End Cutter \n\nSpecification:\n\ntungsten carbide tipped\ncutter for all types of wire up to a maximum of .021” x .025” (.53 mm x .64 mm) | 93/DLVI | 59 | Single unit (PC) |
94 | 281 | Distal end cutter\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 94/DLVI | 57 | Single unit (PC) |
95 | 282 | DONTRIX GAUGE\n\nSpecification:\n\nSpring balance type, minimum measurement till 500\nGms To precisely calibrate orthodontic force there are two units of measurement ounce and gram. Measuring range: 0-450g/0-16 Oz. To measure tension and compression force | 95/DLVI | 39 | Single unit (PC) |
96 | 283 | Double Wax heater pot\n\nSpecification:\n\nwith thermostat controlled temperature regulator ELECTRICALLY OPERATED | 96/DLVI | 20 | Single unit |
97 | 284 | Dry model trimmer\n\nSpecification:\n\n with attached suction unit | 97/DLVI | 10 | Single unit |
98 | 285 | DUPLICATING FLASK\n\nSpecification:\n\n A. Programmable brushless agitator motor\nTemperature controls for precision warm up and cool down phases\nIntelligent heating strategy and provision for effective disposal of gel and prevention of nozzle blockage\nMaintainance of consistent gel quality\nVoltage: 200230V, 50/60Hz,\nB. Pressure Compaction unit for duplicating silicone materials\nAutomatic mixing and metering unit for two component silicone material\nDuplicating Flask:\n(A) individual aluminium duplicating flask with aluminium top and rubber base and 2 base formers (2 sizes)\n (B) duplicating flask with stabilizing insert and three replaceable palatal formers of different sizes | 98/DLVI | 17 | Single unit |
99 | 286 | Electrically operated wax carver\n\nSpecification:\n\nelectrically operated electrical wax curver with thermostat controller. with two detachable carving tools | 99/DLVI | 23 | Single unit |
100 | 287 | Electro polisher\n\nSpecification:\n\nAutomatic digital electro polisher, Auto/Manual Modes, \nWith trimmers, Electrolyte flow regulation\n38 mm disc for PSA paper & cloths\nSupply 230 V. AC\nCurrent – 2.5 Amp., Voltage – 80V, Supply – 230 V.A.C.Polishing probes – Unique Pen Type system with Recirculation of electrolyte, pump 25 watts reservoir (0.5 Ltr) | 100/DLVI | 7 | Single unit with accessories |
101 | 288 | Endo activator\n\nSpecification:\n\nSystem kit that includes handpiece/driver\nbox of small, medium & large activator tips. \nBox of 100 protective barriers. Safe & vigorous energetising intracanal irrigant, Capable of debriding & disinfecting Root canal system | 101/DLVI | 5 | Single unit with accessories |
102 | 289 | Endodontic microsurgical equipment \n\nSpecification:\n\nComprising of \na. Ultrasonic piezoelectric scaler with inbuilt irrigation , LED & water tank\nb. Ultrasonic endodontic retro-surgical tips (for anterior teeth upper & lower and posterior teeth of upper and lower arch)\nc. Ultrasonic passive irrigation, \nd. set of assorted Ultrasonic tip for instrument retrieval and chasing calcified canal | 102/DLVI | 5 | Single unit with accessories |
103 | 290 | Endomotor with torque control \nhand piece.\n\nSpecification:\n\nContinuous &/or reciprocating motions for root canal shaping, Hand piece with integrated on- off switch, auto reverse mode, Speed 250-1200 rpm.\n Torque range 0.6-4 Ncm,\n Multiple adjustable programs\nStandard packaging/physical verification of sample may be made | 103/DLVI | 25 | Single unit |
104 | 291 | EndoVac Irrigation System\n\nSpecification:\n\n Multiple Port adapters, Hand Piece set, Extra Evacuation System, cannulas, delivery tips & syringes. | 104/DLVI | 5 | Single unit with accessories |
105 | 292 | Excavator oval type | 105/DLVI | 200 | Single unit |
106 | 293 | Excavator spoon type\n\nSpecification:\n\nExcavator double ended spoon type | 106/DLVI | 200 | Single unit |
107 | 294 | EXTRAORAL GOTHIC ARCH TRACER\n\nSpecification:\n\nJaw movement recording and centric relation\npositioning, one stylus and one tracing plate\nattachments to the jaw movement recording bases\noutside the mouth\nStandard packaging/physical verification of sample may be made | 107/DLVI | 11 | Single unit with accessories |
108 | 295 | Farabeufs periosteal elevator\n\nSpecification:\n\nof different sizes- length 6-8inch, width 8-12mm, Made of stainless steel. | 108/DLVI | 19 | Single unit |
109 | 296 | Fergusons mouthgag \n\nSpecification:\n\nMade of stainless steel\n | 109/DLVI | 17 | Single unit |
110 | 297 | Fiber optic light\n\nSpecification:\n\nFiber optic based lighting unit consisting of fiber optic cable, led based portable light with controller unit. With rechargeable battery \nISO 13485 OR EC Certificate(directive 93/42/EEC) | 110/DLVI | 14 | Single unit (PC) |
111 | 298 | Flask clamp for brass flask\n\nSpecification:\n \nMade of steel with clamp compatible with brass flask of size no-6 | 111/DLVI | 320 | Single unit |
112 | 299 | Frahm amalgam curver | 112/DLVI | 170 | Single unit |
113 | 300 | Furcation curettes- Quetin\n\nSpecification:\n \nbuccal-lingual 0.9mm-1pc Quetin buccal-limgual 1.3mm-1pc\nQuetin Mesial-distal 0.9mm-1 pc Quetin Mesial-distal 1.3mm-1pc\nconform to ISO 13485:2003/ EN ISO 13485:2012 | 113/DLVI | 11 | Set of 4 curettes |
114 | 301 | Gardner chisel-with 3mm tip\n\nSpecification:\n\nsingle bevel chisel \nMade of martensitic Stainless steel alloy | 114/DLVI | 77 | Single unit |
115 | 302 | Gates glidden drill set\n\nSpecification:\n\nStainless steel, drill compatible with latch type handpiece for use in bulk removal of the tooth structure\nunit pack containing six different sizes each drill having 28-32 mm length. | 115/DLVI | 34 | Unit Set of 6 drill |
116 | 303 | Gillie’s skin hook- doubleprong\n\nSpecification:\n \nMade of stainless steel\n | 116/DLVI | 15 | Single unit |
117 | 304 | Gillie’s skin hook-single prong \n\nSpecification:\n\nMade of stainless steel\n | 117/DLVI | 25 | Single unit |
118 | 305 | Glass bead sterilizer\n\nSpecification:\n\nelectrically temperature regulated to heat contained glass beads with on off switch. \nSmall rectangular base for keeping at chairside \nProvided with lid. \n It should reach operating temperature of approximately 240 C to 270 C in 15-20 minutes time. \nSterilization is on contact with glass beads\nUnit can be left in the “ON” position all day and is safe for use in laminar flow cabinets. | 118/DLVI | 32 | Single unit |
119 | 306 | Glass slab- 8mm thick\n\nSpecification:\n\nTransparent rectangular Glass slab thickness 8mm, length 6” x 4” inch | 119/DLVI | 200 | Single unit |
120 | 307 | Glass slab big\n\nSpecification:\n\nTransparent Square Glass slab thickness 4mm, each side of 6 inch | 120/DLVI | 200 | Single unit |
121 | 308 | Glass slab small\n\nSpecification:\n\nTransparent Square Glass slab thickness 4mm, each side of 3.5 inch | 121/DLVI | 200 | Single unit |
122 | 309 | GOLDMANFOX Periodontal probe\n\nSpecification:\n\ndouble ended probe, markings at 1,2,3,5,7,8,9& 10mm.High quality Stainless steel with satin finish, Antimagnetic rust resistant, Acid Resistant | 122/DLVI | 14 | Single |
123 | 310 | Gracey curette set\n\nSpecification:\n\nof 9 Size ½, ¾,5/6,7/8,9/10, 11/12,13/14, 15/16, 17/18.Made of hard tempered steel\nDouble ended\nHandle-10.2-10.8cm\nShank-3.1-3.6cm\nLength-6.8-7.4mm\nOffset blade beveled at 60 -70 degree to the shank\n1.triple tempered steel\n2.satin steel handle\n3.corrosion resistant\n4.rust resistant\n5.stain resistant\n6.can be sharpened by traditional sharpening stones\nconform to ISO 13485:2003/ EN ISO 13485:2012 ISO 13485 OR EC Certificate(directive 93/42/EEC)CE & FDA APRROVED | 123/DLVI | 23 | Single unit |
124 | 311 | Guarded nasal chisel set of right &left\n\nSpecification:\n\nSize : 4, 5, 6, 8mm - Right & Left in Pair Made of stainless steel | 124/DLVI | 17 | Single unit |
125 | 312 | Half round plier\n\nSpecification:\n\nFor orthodontic work. Made of hard tempered steel | 125/DLVI | 152 | Single unit |
126 | 313 | Hand Scaler set of 5 piece\n\nSpecification:\n\nSet containing 1 piece each of: sickle, push, universal, broad right & left . | 126/DLVI | 158 | Set of 5 piece |
127 | 314 | Hard wire cutter\n\nSpecification:\n \nHard wire cutter made of tungsten carbide tipped | 127/DLVI | 57 | Single unit |
128 | 315 | Heavy duty lathe with suction unit\n\nSpecification:\n\nElectrically operatedHeavy duty motor unit having power not less than – 0.5hp \nHigh speed R.P.M.-3000 rpm\nArrangement to attach Bur holding chuck – Electroplated spindle on one side for polishing buff wheel, On the other arm is a Grinding stone Wheel of diameter 2.5 inch or more. Provided with\nbuilt in High Power dust suction unit for clean, unpolluted, dust free work environment, attached with dust collection bag – easily removable tray for debris collection.\nTable mountable Heavy Base Plate for vibration free operation\nBuilt – in lighting for high visibility | 128/DLVI | 22 | Single unit with accessories |
129 | 316 | Heavy wire cutter\n\nSpecification:\n\nwire cutter tungsten carbide tipped\n | 129/DLVI | 57 | Single unit |
130 | 317 | Hinge articulator\n\nSpecification:\n\nRust free construction\nPermit opening & closing in hinge like motion. Support upper & lower cast.\n Upper member adjustable with locking nut. | 130/DLVI | 190 | Single unit |
131 | 318 | Hook crimping plier\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 131/DLVI | 39 | Single unit (PC) |
132 | 319 | Hot plate with wooden handle | 132/DLVI | 200 | Single unit |
133 | 320 | Howarth’s periosteal elevator\n\nSpecification:\n\nDouble ended: one end flat,broad sharp edge, other end rugine ended Made of stainless steel | 133/DLVI | 19 | Single unit |
134 | 321 | Howe’s pliers- anterior\n\nSpecification:\n\nwith serrations, useful for placement and removal of archwires, pins and other auxiliares \nMade of stainless steel | 134/DLVI | 64 | Single unit (PC) |
135 | 322 | Howe’s pliers- posterior\n\nSpecification:\n\npliers with serrations, useful for placement and removal of archwires, pins and other auxiliares | 135/DLVI | 64 | Single unit (PC) |
136 | 323 | Humby’s knife holder\n\nSpecification:\n\nMade of stainless steel\n | 136/DLVI | 19 | Single unit |
137 | 324 | Hydraulic press\n\nSpecification:\n\nThe closed circuit hydraulic press should work with a pressure up to 7000 Kg of thrust.\n It can contain up to three flasks at a time. \nThe structural elements in chromium plated steel.\n Provided with dial. | 137/DLVI | 11 | Single unit |
138 | 325 | Hydro-solder\n\nSpecification:\n\nMains voltage: 1 x 230 V,Mains frequency: 50 x 60 Hz, Mains fuse: 1 x 10. A\nMax.gas production: 6 liter\nMax. Nozzle size: 0.07mm\n Dimensions W x H x D x (mm): 330 x 230 x 310 mm\nWeight: 22 Kg\nCapacity: 110lt, with accessories | 138/DLVI | 13 | Single unit with accessories |
139 | 326 | Implant microsurveyor \n\nSpecification:\n\nwith Compass surveying system, portable hand held surveyor | 139/DLVI | 7 | Single unit |
140 | 327 | Implant retractor\n\nSpecification:\n\nMade of stainless steel. Autoclavable | 140/DLVI | 2 | Single unit |
141 | 328 | Incubator \n\nSpecification:\n\nRobust construction\nFlawless finish\nLong functional life\nInner chamber size 14" x 14" x 14’’ with two shelves\nWith Thermostat control & digital display ISO/FDA/CE OR EC Certificate | 141/DLVI | 8 | Single unit |
142 | 329 | Inlay wax curver double ended | 142/DLVI | 200 | Single unit |
143 | 330 | INSTRUMENT SHARPENING KIT WITH ARKANSAS STONE\n\nSpecification:\n\n flat Arkansas stone with conical shape\nplastic test stick(5)\nstone oil \nmagnifying lens& other accessories | 143/DLVI | 41 | Single unit |
144 | 331 | Intra oral camera with video monitor\n\nSpecification:\n\na)camera:\neasy to use, narrow head, comfortable for patient Intra oral camera with provision of variable lens adjustment that can be attached to dental chair unit\nvideo compatible so that images can be displayed on a computer workstation/LCD monitor\nStill image Resolution: 1024 (H) x 768(V) or more\nVideo Resolution: 640 (H) X 480 (V) or more\nFocus Range: 1 mm - 25 mm\nLens surrounded by LED lamp\nInput: 220V 50-60Hz \nOutput: 5V, 2A | 144/DLVI | 39 | Single unit with accessories |
145 | 332 | Intraoral camera with fluorescent technology\n\nSpecification:\n\nIntra oral camera with caries detection and periogingival inflammation detection facility based on flurescent technology | 145/DLVI | 10 | Single unit with accessories |
146 | 333 | INTRAORAL SAND BLASTER\n(MICROETCHER)\n\nSpecification:\n\nLong tubing with compatible adapter for the Airotor Handpiece point\nOf the dental chair, Fully autoclavable, 50 microns\nAluminium oxide particle size, 360 degree adjustable nozzle. | 146/DLVI | 20 | Single unit with accessories |
147 | 334 | INTRAORALGOTHIC ARCH TRACER\n\nSpecification:\n\nJaw movement recording and centric relation\npositioning, one stylus and one tracing plate\nattachments to the jaw movement recording bases\ninside the mouth\n | 147/DLVI | 11 | Single unit with accessories |
148 | 335 | Kilner’s cheek retractor\n\nSpecification:\n \nMade of stainless steel\n | 148/DLVI | 36 | Single unit |
149 | 336 | Kirkland gingivectomy knife\n\nSpecification:\n\nFor use in periodontal surgery \n | 149/DLVI | 23 | Single |
150 | 337 | Kocher’s forceps\n14cm hemostatic forcep.\n\nSpecification:\n\n It is specifically designed to catch the bleeder that are deep within tissue hence it is ideally used on tough structures Made of stainless steel | 150/DLVI | 30 | Single unit |
151 | 338 | Laboratory micromotor with brushless motor\n\nSpecification:\n \nCompact and portable size, Continuous variable speed control , R.P.M-1000 -40000,On/Off foot switchOne- touch change of the driving direction for efficient operation with brushless motor With handpiece | 151/DLVI | 19 | Single unit with accessories |
152 | 339 | Laboratory micromotor with carbon brush motor\n\nSpecification:\n \nCompact and portable size, Continuous variable speed control , R.P.M-1000 -40000,On/Off foot switchOne- touch change of the driving direction for efficient operation with carbon brush motor With handpiece | 152/DLVI | 52 | Single unit with accessories |
153 | 340 | Langenback’s retractor\n\nSpecification:\n \nMade of stainless steel\n | 153/DLVI | 25 | Single unit |
154 | 341 | Laser guided pin drilling system with Pins\n\nSpecification:\n\nElectrically operated 110V/240V, Laser guided Pinsetter, pin drilling for easy die pin attachment. \nlaser light technology with carbide bur drill with high speed motor. \nTo Accurately Drill Parallel Holes Into The Underside Of The Model Die pins of various sizes(1000 pieces total) made with non corrosive alloys for use with pindex system of die pins. | 154/DLVI | 13 | Single unit with accessories & 1000pc pins |
155 | 342 | LEAD APRON\n\nSpecification:\n\nAdult Size, 0.5 mm thick lead covered with cotton on\nboth sides, overstraps, buckles & hand gloves (size 6\nto 7.5) with 0.5 mm thickness lead | 155/DLVI | 79 | Single unit |
156 | 343 | Lecron wax\n\nSpecification:\n\ncurver made of steel\n | 156/DLVI | 200 | Single unit |
157 | 344 | Leuckhart pieces\n\nSpecification:\n\nTwo L shaped metallic stands for preparing paraffin wax block | 157/DLVI | 49 | Single unit |
158 | 345 | light cure unit\n\nSpecification:\n\n Led based. light modes- fast, ramped & pulsed\nDisplay for mode & timer\nSelection\nChordless with rechargeable lithium battery \nlight intensity not less than 1200 mW/cm2Output peak wavelength range 450 - 490 nm (intensity maximum at 460 nm)\nwith inbuilt timer, on off switch | 158/DLVI | 40 | Single unit |
159 | 346 | Lingual arch plier\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 159/DLVI | 55 | Single unit |
160 | 347 | Loop forming plier\n\nSpecification:\n\nFor orthodontic work. \nMade of hard tempered steel | 160/DLVI | 235 | Single unit |
161 | 348 | Loop forming plier\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 161/DLVI | 53 | Single unit |
162 | 349 | Lower molar Extraction forcep English pattern\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip, disc /box type of hinge joint Set of one piece right & one piece lower molar forcep | 162/DLVI | 50 | Single unit |
163 | 350 | Lower premolar Extraction forcep English pattern\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip, disc /box type of hinge joint | 163/DLVI | 50 | Single unit |
164 | 351 | Lower Roots forcep\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip | 164/DLVI | 50 | Single unit |
165 | 352 | Lower universal forcep\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip, disc /box type of hinge joint Set of one piece right & one piece lower molar forcep | 165/DLVI | 50 | Single unit |
166 | 353 | Magnification loupes 3.5x\n\nSpecification:\n\nErgonomically designed binocular loupe that can be worn over spectacle frame capable of 3.5X magnification at 420mm with 3Watt LED rechargeable light | 166/DLVI | 17 | Single unit |
167 | 354 | Magnification loupes 4.5x\n\nSpecification:\n\nErgonomically designed binocular loupe that can be worn over spectacle frame capable of \n4.5X magnification at 420mm with 3Watt LED rechargeable light \n | 167/DLVI | 17 | Single unit |
168 | 355 | Magnifying work lamp\n\nSpecification:\n\nwith flexible & adjustable stand and base. Inbuilt LED based optical illumination system. \nGlass Lens diameter 7 inches or more, Magnification power upto 4 X | 168/DLVI | 22 | Single unit |
169 | 356 | Manual crown remover\n\nSpecification:\n\n with adjustable spring with crown remover tip ¬ 2 Single crown remover contrangled tip ¬ 3 Open¬end adjustment wrench | 169/DLVI | 20 | Single unit with accessories |
170 | 357 | Manual press\n\nSpecification:\n\nwith base and cross bar made with high strength steel.\nThe structural elements made with chromium plated steel.\nCapable of pressing upto 1 to 3 flasks at a time.\nBase should have holes for attachment to bench | 170/DLVI | 59 | Single unit |
171 | 358 | Marquis colour coded probe\n\nSpecification:\n\nFor periodontal surgery Made of stainless steel colour coded at 3-6 & 9-12 mm | 171/DLVI | 14 | Single unit |
172 | 359 | Mathieu plier\n\nSpecification:\n\nstraight & curved for orthodontic work\nUsed for ligature typing and placing of elastics | 172/DLVI | 39 | Single unit |
173 | 360 | MBT gauge\n\nSpecification:\n\nFor .022” slot \nFor orthodontic work. Made of stainless steel | 173/DLVI | 42 | Single unit (PC) |
174 | 361 | Metal impression tray non perforated\n\nSpecification:\n\nMade of non corrosive alloy\nfor edentulous patient set of upper & lower, size 0,1,2,3,4.\n(Price being same to be supplied as per requirement of user) | 174/DLVI | 250 | Unit Set of 5 pairs |
175 | 362 | Metal impression tray perforated\n\nSpecification:\n\nfor dentulous patient \nMade of non corrosive alloy\nset of upper & lower, size 0,1,2,3,4.\n(Price being same to be supplied as per requirement of user) | 175/DLVI | 250 | Unit Set of 5 pairs |
176 | 363 | Metal suction Tip\n\nSpecification:\n\na)3mm diameter -10 pc\nb)5mm diameter-10 pc\nMade of stainless steel | 176/DLVI | 40 | Single unit |
177 | 364 | Micro Oscillating saw \n\nSpecification:\n\ncapable of Easily Cutting Channels And Bone Blocks\nMaximum 12,000 Oscillations Per Minute. Compact Design For Easy Access .\nTwo Shaft Lengths & 4 Blade Sizes For Optimum Access.\nIncludes External Irrigation Port For Effective Bone Cooling\nUniversal "E" Type Coupling that Fits Implant Motor unit | 177/DLVI | 7 | Single unit |
178 | 365 | Microhead air rotor handpiece\n\nSpecification:\n\nsuitable for use in child patient, head size 8.5 x 19.4 mm, provided with water spray, body made with ceramics autoclavable, rotational speed 3,00,000 to 450,00,00 rpm, provided with a bur changer & wrench.\nPhysical verification required | 178/DLVI | 38 | Single unit |
179 | 366 | Micropipettes\n\nSpecification: \n\nfeature built-in tip ejectors and autoclavable tip cones. Should work on a click-stop digital system, are easy to calibrate and maintain, and easy to disassemble for autoclaving. Manufactured as per ISO 9001:2008. Each pipette should be individually calibrated according to ISO 8655 standards.Calibration certificate must be provided with each pipette. Accuracy and Precision values should be those laid down in the ISO 8655 standards.Built-in, streamlined tip ejector facilitates easy tip ejection and access to narrow necked bottles and tubes. Variable Volume Pipette: 50-200 µl. Increments [µl]: 1 9 Volume [µl]: 50 to 200. Accuracy (±) %: 0.6 to 1 11 Precision (±) %: 2 to 0.3 12 It should be CE mark | 179/DLVI | 70 | Single unit |
180 | 367 | Microvascular instrument kit\n\nSpecification:\n\nKit comprises of- \n1.Micro scissors\n2.Micro needle holder\n3.Jwellers forceps\n4.Vessel dilators\n5.Liga clips(no.100.no.200)\n6.Ligaclip applicators\n7.Vessel clamp (2A,2V,3A,3V) \n8. Vessel clamp applicator\n9. Hand held colour Doppler unit\n10.Pneumatic tourniquet\nSpecification to be quoted by the Bidder / Manufacturer\nMicro scissors-\ni) Adventitia Scissors- Flat handle , 8mm wide, straight-length of 15cms, blades 19mm – 5 pcs\nii) Dissecting Scissors – Flat handle, 8mm wide , curved,length of 15cms, blades 19mm – 5 pcs \niii) Adventitia Scissors- Round Handle, 8mm diameter of tip,straight, length 15cms, blades 12mm – 5 pcs\niv) Dissecting Scissors – Round handle, 8mm diameter of tip,curved, length 15 cms, blades 12mm – 5 pcs\nMicro needle holder:\ni) Flat handle , 8mm wide, curved, 14 cms length – 6 pcs\nii) Round Handle, 8mm, curved, 15 cms length – 6 pcs\nJewellers forceps\ni) Flat handle , 9mm wide, straight, 13.5 cms length – 6 pcs\nii) Flat handle , 9mm wide, angulated 45 degrees, 13.5 cms length – 6 pcs\niii) Round handle , 8mm wide, straight, plateau, 15 cms length – 6 pcs\nVessel dilators:\ni) Flat handle , 9mm wide, angulated 10 degrees, \nlength 11cms – 6pcs\nLiga clips – made of Stainless steel, autoclavable.\nNo.100 – 150 sets ( each set containing 6 liga clips)\nNo.200 - 150 sets ( each set containing 6 liga clips)\nNo.400 – 100 sets ( each set containing 6 liga clips)\nLigaclip applicator:\nGrooves on inside jaw surfaces of applier which helps in increasing of jaw clip security.\nAngled jaws to improve visibility beyond structures\nMechanical stop.\nMade of stainless steel and autoclavable. | 180/DLVI | 4 | Unit of multiple items |
181 | 368 | Mini Pin & Ligature wire cutter \n\nSpecification:\n\ntungsten carbide tipped\nCuts soft wire pins and ligature wire up to .012”(.30 mm) | 181/DLVI | 59 | Single unit (PC) |
182 | 369 | Miscellaneous HI\n\nSpecification:\n\n139 plier For orthodontic work. Made of stainless steel | 182/DLVI | 39 | Single unit (PC) |
183 | 370 | Miscellaneous-HI | 183/DLVI | 10 | Single unit |
184 | 371 | Model trimmer with carborundum disc\n\nSpecification:\n\nmotor RPM 2800 Heavy duty, Equipped with two Ball Bearing Single speed, Rating continuous with Buffer and 10" CARBORUNDUM Disc , with heavy base that can be clamped and installed on underlying table,with water inlet and out flow water system. | 184/DLVI | 22 | Single unit |
185 | 372 | Model trimmer with diamond disc\n\nSpecification:\n\n1/2HP, RPM-2800, Heavy Duty Equipped with Two Ball Bearings, Single speed, Rating continuous with buffer and one 10" Diamond Disc Rough or fine without suction.1 piece spare diamond disc to be provided | 185/DLVI | 28 | Single unit with 1 piece spare disc |
186 | 373 | Model trimmer with double disc\n\nSpecification:\n\none diamond & one carborundum disc\n RPM 2800 Double Motors HorsePower-1/2 or more each, Heavy duty, Equipped with Two Ball Bearings each motor, Single speed, Rating continuous with fixed one10" diamond disc fine, one carborundum coarse cutting wheel, base inlet, with outflow water system. | 186/DLVI | 22 | Single unit |
187 | 374 | Molts elevator\n\nSpecification:\n\nLength 7”Double ended with one round, blunted end and one pointed end Made of stainless steel | 187/DLVI | 25 | Single unit |
188 | 375 | Mouth prop\n\nSpecification:\n\nAutoclavable Made of Stainless steel with rubber pads for intra oral use over occlusal surfaces during surgery. The rubber pads are of 4 sizes attached by a stainless steel chain. | 188/DLVI | 40 | Single unit |
189 | 376 | Naber’s probe\n\nSpecification:\n\nFor use in periodontal surgery double ended furcation probe\nconform to ISO 13485:2003/ EN ISO 13485:2012 | 189/DLVI | 130 | Single (PC) |
190 | 377 | Omega loop forming plier\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 190/DLVI | 39 | Single unit |
191 | 378 | Orban gingivectomy knife\n\nSpecification:\n\nFor use in periodontal surgery \n | 191/DLVI | 23 | Single |
192 | 379 | Oschenbein chisel curved\n\nSpecification:\n\nsize No. 1 and No. 2 Ochsenbein chisels periodontal chisels. They havethree cutting edges, a flat edge on the tip and a curvededge on each side of the tip. | 192/DLVI | 9 | Single unit |
193 | 380 | Oschenbein chisel straight \n\nSpecification:\n\n17.5 cm x 4 mm\nsize No. 1 and No. 2 Ochsenbein chisels periodontal chisels. They havethree cutting edges, a flat edge on the tip and a curvededge on each side of the tip. | 193/DLVI | 9 | Single unit |
194 | 381 | Osteotome 20mm \n\nSpecification:\n\nMade of stainless steel\n | 194/DLVI | 15 | Single unit |
195 | 382 | Paeso rimmer drill set\n\nSpecification:\n\nStainless steel, drill compatible with latch type handpiece for use in bulk removal of the tooth structure\nunit pack containing six different sizes each drill having 28-32 mm length. | 195/DLVI | 34 | Unit Set of 6 drill |
196 | 383 | Palatal Trimmer \n\nSpecification:\n\nprovided with1 fast cutting trimmer, electrically operated ,RPM-2600 or more\nBody made with 304 grade Stainless steel, or non rusting alloy. Dull Finished work surface, Dust collection with adapter hose, provided with1 fast cutting trimmer | 196/DLVI | 9 | Single unit with accessories |
197 | 384 | Paquette blade handle | 197/DLVI | 11 | Single unit |
198 | 385 | Paraffin wax bath (thermostatically controlled)\n\nSpecification:\n\nConstruction – Double walled effectively insulated.Wax tank of 20 gauge SS sheet. Fitted with laminated wooden rim and anodized alumininium cover mounted on 5 cm diameter.\nHeater- Two 1 KW each special wax heater.\nHeat control- Thermostat to control temperature fron 30 degree C to 110 degree C\nFinish- Externally finished in oven baked\nAccessories-Power plug, 1 brush for wax application and aluminium sheet mesh for heater. | 198/DLVI | 19 | Single unit |
199 | 386 | Pediatric Extraction lower incisors & canine forcep\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length | 199/DLVI | 40 | Single unit |
200 | 387 | Pediatric Extraction lower molar forcep\n\nSpecification:\n\nfor children\nmade of hard stainless steel with knurnled handle grip,disc type of hinge joint,\n 4.5 inches of length | 200/DLVI | 40 | Single unit |
201 | 388 | Pediatric Extraction lower premolar forcep\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length | 201/DLVI | 40 | Single unit |
202 | 389 | Pediatric Extraction universal forcep\n\nSpecification:\n \nmade of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length | 202/DLVI | 40 | Single unit |
203 | 390 | Pediatric Extraction upper incisor & canine forcep\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length | 203/DLVI | 40 | Set of one right & one left |
204 | 391 | Pediatric Extraction upper molar forcep left\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length | 204/DLVI | 40 | Single unit |
205 | 392 | Pediatric Extraction upper molar forcep right & left\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length | 205/DLVI | 40 | Single unit |
206 | 393 | Pediatric Lower Roots forcep\n\nSpecification:\n\nmade of hard stainless steel with -knurnled handle grip,disc type of hinge joint, 4.5 inches of length | 206/DLVI | 40 | Single unit |
207 | 394 | Pediatric upper Roots forcep\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length | 207/DLVI | 40 | Single unit |
208 | 395 | Piezo surgical kit\n\nSpecification:\n\n device with intermittent operation, 60 sec on then 30 sec off with irrigation, & 30 sec on- 120 sec off without irrigation, power supply 240V,50/60 Hz, maximum power absorbed 120VA. Surgical tip capable of modulating from 10 to 30 or more. 29kHz or more. Power adjustable from 2.8 to 16W. Tip vibration in range of 60-200µm.Motor with tips & other accessories\n(European CE/ FDA (USA)approved) | 208/DLVI | 4 | instrument kit |
209 | 396 | Pikling kit\n\nSpecification:\n\nElectrically heated and thermostatically controlled pickling unit for acid based pickling agents with low power consumption for pickling of precious metals. Swivel sieve and housing made of shock-proof and acid-resistant polypropylene material | 209/DLVI | 12 | Single unit with accessories |
210 | 397 | Pin & Ligature wire cutter\n\nSpecification:\n\ntungsten carbide tipped\nCuts soft wire pins and ligature wire up to .015” (.38 mm) | 210/DLVI | 59 | Single unit (PC) |
211 | 398 | Plaster knife\n\nSpecification:\n \nwith working length not less than 2 .5inches | 211/DLVI | 200 | Single unit |
212 | 399 | plaster spatula\n\nSpecification:\n\nRound ended steel spatula having width of 1.25 inch & length 5-6 inches, with plastic or wooden handle | 212/DLVI | 200 | Single unit |
213 | 400 | Plastic filling instrument\nWard type | 213/DLVI | 200 | Single unit |
214 | 401 | Pneumatic crown remover\n\nSpecification:\n\nPneumatic, autoclavable tips, Basic Kit Includes Easy Pneumatic Crown and Bridge Remover Bridge remover tip ¬ 1 Single crown remover tip ¬ 2 Single crown remover contrangled tip ¬ 3 Open ¬ended adjustment wrench Rubber gasket Flexi¬wire set | 214/DLVI | 20 | Single unit with accessories |
215 | 402 | Pneumatic deflasking unit\n\nSpecification:\n \n operates on air pressure.\nWith handheld chisel- provided with detachable tips \n provided with variable powercontrol with air inlet and tubing length not less than 1.5 meter.\nWorking pressure 1-6 bar | 215/DLVI | 17 | Single unit |
216 | 403 | Portable Transcutaneous Electrical Nerve Stimulation (TENS)\n\nSpecification:\n\nunit for pain management with replacement electrodes. The machine should have Burst, Continuous and Modulation pulse modes. Dual, isolated between channels with a pulse intensity of 0-80mA peak into 500ohm load. Pulse rate of 2-120Hz adjustable. Pulse width 40-260 microseconds, adjustable. Maximum voltage: 110V. Maximum charge: 21microCoulombs per pulse | 216/DLVI | 3 | Single unit |
217 | 404 | Pressure moulding machine \n\nSpecification:\n\nThe unique thermally controlled heater reaches working temperature in few minutes.\nPower: 230 V, 850 W\nWorking pressure: 0,5 – 6,0 bar\nMeasurements (W x H x L): 450 x 230 x 260 mm | 217/DLVI | 17 | Single unit |
218 | 405 | Pulp Tester digital\n\nSpecification:\n \nPreset stimulus speed mode, Battery-9V, Auto-off after 3 min, with autoclavable tips, one touch operation, with digital read out of display | 218/DLVI | 17 | Single unit |
219 | 406 | Punch biopsy forceps \n\nSpecification:\n\nMade of stainless steel\n | 219/DLVI | 19 | Single unit |
220 | 407 | Rib raspatory right & left\n\nSpecification:\n\nMade of stainless steel\n | 220/DLVI | 7 | Set of 1 pair |
221 | 408 | Rib shear (Doyan)\n\nSpecification:\n\nMade of stainless steel\n | 221/DLVI | 16 | Single unit |
222 | 409 | Ribbon arch plier\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 222/DLVI | 38 | Single unit |
223 | 410 | RME Bender\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 223/DLVI | 37 | Single unit |
224 | 411 | Robinson black bristle brush\n\nSpecification:\n\nhaving diameter of not more than 2.5 inch. | 224/DLVI | 155 | Single unit |
225 | 412 | Root canal explorer | 225/DLVI | 152 | Single unit |
226 | 413 | Rowe zygomatic elevator\n\nSpecification:\n\nMade of stainless steel\n | 226/DLVI | 17 | Single unit |
227 | 414 | Rubber bowl\n\nSpecification:\n\nsize-large\n13 cm in height made with flexible synthetic rubber material | 227/DLVI | 350 | Single unit |
228 | 415 | Rubber dam kit \n\nSpecification:\n\nRubber Dam Clamp Forceps \nRubber Dam Punch \nRubber Dam Frame - Adult \nUniversal Rubber Dam Template \nFDI Rubber Dam\nProvided with different clamp designs such as molar clamps, bicuspid clamps winged, labial clamps winged\nit Contains:\n-Plastic Dental Dam Frame 6"/5"\n-Wedjets Stabilizing Cord Pack(S)\n-Hygenic Template 6"/5"\n-Punch\n-Forcep\n-Rubber Dam Sheets 6x6"(36)/Pedo 5x5"(52)\n-Set of 9 Clamps-Adult/Set of 6-Pedo | 228/DLVI | 34 | Single unit Kit |
229 | 416 | Sand blaster unit\n\nSpecification:\n\nSelf illuminated chamber. Unit with ventilation slits with rubber gloves, pressure regulator, air filter ,provided with glass pane. Flow of blasting material from 1 to 6 Bar. With wear resistant nozzle tip attached with wear & tear resistant hoses & nozzles. With filter. Micro & macro mode | 229/DLVI | 10 | Single unit with accessories |
230 | 417 | Sanders knife \nsize-1/2 | 230/DLVI | 5 | single Single unit |
231 | 418 | Schluger bone file For use in periodontal surgery | 231/DLVI | 9 | Single unit |
232 | 419 | Self Adjusting Endodontic file system(SAF SYSTEM)\n\nSpecification:\n\nDigitally controlled endodontic micromotor with peristaltic pump.\n Self adjusting root canal files, rotary motion with speed and torque control, \nreciprocating motion with reverse/ forward angular movement | 232/DLVI | 7 | Single unit with accessories |
233 | 420 | Self retaining retractor- Weit Laner type\n\nSpecification:\n\n Made of stainless steel\n | 233/DLVI | 15 | Single unit |
234 | 421 | Semi adjustable articulator with accessories\n\nSpecification:\n\nwide view Arcon Articulator With spring¬ bow, ear¬piece, face bow, orbital indicator, bite fork & other accessories\nStandard packaging/physical verification of sample may be made | 234/DLVI | 20 | Single unit with accessories |
235 | 422 | Separator placement pliers\n\nSpecification:\n\nFor orthodontic work. \nMade of hard tempered steel | 235/DLVI | 65 | PC |
236 | 423 | Sinus lifting instrument kit\n\nSpecification:\n\nFor Lateral & crestal approach\n with s-reamer/lateral reamers\ninitial drill/crestal drills\n bone inserter\nbone spreader\n bone carrier\n bone condenser\ndepth gauge\n chisels of different width\n sinus curettes- of various designs\n bone rongeur forceps\nmallet \nirrigation syringe & tips\n& other instruments\nautoclavable cassette 1 piece | 236/DLVI | 2 | instrument kit |
237 | 424 | Slide storing cabinet\n\nSpecification:\n\nCabinet for 1050 slides consisting of 6 drawers each for 175 slides, arranged in single rowFramework made of 15mm plywood with top and sides covered with sunmica laminated sheet. | 237/DLVI | 40 | Single unit |
238 | 425 | Slide warming table\n\nSpecification:\n\nTop surface made of Stainless Steel (SS-304 grade)\nThe surface temperature is controlled from ambient to 70°C\nSupplied complete with pilot lamp, cord and plug\nTo work on 220/230 Volts A.C. Supply | 238/DLVI | 16 | Single unit |
239 | 426 | SPIRIT LAMP\n\nSpecification:\n \nMade of stainless steel \nOF 100 ML CAPACITY WITH WICK & DETACHABLE CAP STAINLESS STEEL body | 239/DLVI | 200 | Single unit |
240 | 427 | Spot welder with soldering attachment\n\nSpecification:\n\n• Electrically operated\n• Voltage110 - 240 volts\n• Applications / Indication Spot Welding\n• Power Settings2,000 Amperes\n• Heat Settings2\n• Electrode / Tip Type Hand Electrode\n• Welding Positions adjustable | 240/DLVI | 13 | Single unit with accessories |
241 | 428 | Steel mallet\n\nSpecification:\n\nfor use in oral surgical work Made of stainless steel length 7.5”, \nhead diameter 20-22mm | 241/DLVI | 19 | Single unit |
242 | 429 | Steel slide racks for staining\n\nSpecification:\n\n The 5-Slide Gripper can accommodate 5 microscope slides in one staining procedure.It fits most coplin and round-open staining jars\nIt should be made of a special material which is resistant to all chemicals and solvents which are used in staining\nIt withstands drying temperatures up to 80°C | 242/DLVI | 79 | Single unit |
243 | 430 | Step plier\n\nSpecification:\n\nFor orthodontic work. Made of hard tempered steel | 243/DLVI | 170 | Single unit |
244 | 431 | Surgical elevators- Coopland’s pattern \n\nSpecification:\n\nmade of hard stainless steel \n | 244/DLVI | 65 | Single unit |
245 | 432 | Surgical elevators- Cryer’s pattern\n\nSpecification:\n\nmade of hard stainless steel\nLength 145mm, neck diameter 3.6mm, working tip length 9mm for right & left\nSet of 2 units cryer’s right, left | 245/DLVI | 65 | Single unit set of 2 instruments |
246 | 433 | Surveyor mounted Miling machine\n\nSpecification:\n \nUniversal precision milling unit. Areas of application; wax milling and scraping ; milling, fine grinding, drilling and smoothing of metal with the help of the modeling spindle, it can be used as a surveying instrument and for mounting auxiliary parts. Magnetic locking device for model table. Drilling depth stop and connection facilities for additional handpiece for finishing. Advantages: Universal design for measuring, blocking and routing (router head accept spindles, drawing tools and measuring tools). Easily movable double articulating arm free from play. Routing spindle with quick coupling. Controllable, heatable wax knife\nRPM can be infinitely controlled from 3000 to 35000 rpm. Left/right rotation. Route head with micrometer screw for exact vertical bores. Good illumination due to integrated LED light ISO 13485 OR CE Certificate | 246/DLVI | 10 | Single unit with accessories |
247 | 434 | Three prong plier\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 247/DLVI | 38 | Single unit |
248 | 435 | Tissue biopsy kit\n\nSpecification:\n\n1.Small and short scalpel blades (no. 15, 11, 12 or even 5) –\n 2. Mosquito forceps – 2 pc curved & 2 pc straight\n3. Gauze container made of stainless steel- size small 1pc\n 4. Alley’s tissue forcep 2pc\n5. punch biopsy set-one piece of three different diameters (circular blade size 3 mm, 5mm & 7 mm) in each kit \n6. Mc Indoe’s dissecting scissor1pc\n7. Bone scoop- small1pc\n8. Bone curette- tip diameter 3 mm-1pc\n9. Sklar Tungsten Carbide Bozeman 10.Needle Holder 8" Tungsten Carbide tipped- 1 pc with catch,\n11. Wards needle holder- 1pc\n12. Toothed dissecting forcep-1pc\n13. Non Toothed dissecting forcep-1pc | 248/DLVI | 8 | Kit of multiple units |
249 | 436 | Tissue capsules / Tissue embedding cassettes\n\nSpecification:\n\nMade of acetyl polymer;Cassettes should keep specimen safely submerged in liquid, Efficient flow-through slots,Snap-latch and hinge-lock design prevent early separation of base and lid and allows for one hand operation. Large labeling area on two sides of cassette. Anterior writing area is at 35° angle.\nPore size: 1mm square pores\nOutside dimensions: 28.5 x 41 x 6.7mm (1.12" x 1.61" x 0.26")\nInside dimensions: 26 x 30 x 5mm (1.02" x 1.18" x 0.2") | 249/DLVI | 79 | Single unit |
250 | 437 | Tissue floatation water bath\n\nSpecification:\n\n(thermostatically controlled) Inner tank (Single piece) made of black anodized aluminum. Housing made of powder coated aluminum. Front panel consist of temperature regulator knob, mains switch and pilot lamp. Inside black and outer surface finished in powder paint, with wide enough rim for drying the wet slides.\nBath size(inner)-225mm*70mm\nTemperature- controlled by capillary tube thermostat\nTemperature range-\n+5 degree c to 70 degree C | 250/DLVI | 79 | Single unit |
251 | 438 | Torch, alcohol, dental \n\nSpecification:\n\nWick Volume capacity 90ml or more, with adjustable needle point flame, body metal or plastic | 251/DLVI | 120 | Single unit |
252 | 439 | Torquing pliers male\n\nSpecification:\n \nFor orthodontic work. Made of stainless steel | 252/DLVI | 21 | Single unit (PC) |
253 | 440 | Torquing pliers male\n\nSpecification:\n \nFor orthodontic work. Made of stainless steel | 253/DLVI | 20 | Single unit (PC) |
254 | 441 | Tourniquet- arm\n\nSpecification:\n\nhaving pressure regulator, tubing and connectors With not less than7 cm inflatable cuff | 254/DLVI | 25 | Single unit |
255 | 442 | Tourniquet- leg\n\nSpecification:\n\nhaving pressure regulator, tubing and connectors With wide 14 cm inflatable cuff | 255/DLVI | 15 | Single unit |
256 | 443 | Towel clips (clamps)\nBackhause type\n\nSpecification:\n \nTo secure surgical drapes and to secure plastic and rubber tubing to drapes FEATURES: Sharp prong tips 31/2 inchand 51/4 inch Additional use: Remove metal temporary crowns Made of stainless steel | 256/DLVI | 35 | Single unit |
257 | 444 | Towel Cross Section Clip\n\nSpecification:\n\nMade of stainless steel Used to fix drapes to tissue with minimal trauma during surgical operations | 257/DLVI | 35 | Single unit |
258 | 445 | Tracing table\n\nSpecification:\n\nbox portable with opaque screen\nLight Box with LED \nelectrically operated with Ajustbale Illumination. Box dimension 14” x 16” or more | 258/DLVI | 10 | Single unit |
259 | 446 | TRANSPARENCY SCANNER\n\nSpecification:\n\nDual lens system, minimum 6,400 DPI optical\nresolution, 4.0 DMAX for smooth gradation and fine\nshadow detection, antireflective\noptical coating and\nhigh reflection mirror, digital ICE technology, 8” x 10”\ntransparency unit built into lead | 259/DLVI | 5 | Single unit with accessories |
260 | 447 | Trephine Bur Set\n\nSpecification:\n\n of 3. Dia- 2,3,4mm\nfor harvesting bone cores For use in periodontal surgery ISO 13485 OR EC Certificate(directive 93/42/EEC) | 260/DLVI | 6 | Single unit set |
261 | 448 | Turret\n\nSpecification:\n\nZero torque (blue) \nFor orthodontic work | 261/DLVI | 38 | Single unit (PC) |
262 | 449 | Tweed plier\n\nSpecification:\n\nFor orthodontic work. Made of stainless steel | 262/DLVI | 53 | Single unit |
263 | 450 | Typhodont articulator\n\nSpecification:\n \nArticulated Model with Soft Pink (Not Transparent) acrylic or plastic Gingiva Material. Included:28 anatomically shaped screwable typhodont ivorine teeth | 263/DLVI | 125 | Single unit |
264 | 451 | Ultrasonic cleaner\n\nSpecification:\n\n 220V, 100 -200watt & above, 5 liter capacity, with stainless steel body &cover. | 264/DLVI | 27 | Single unit |
265 | 452 | ULTRASONIC DENTAL SCALER \n\nSpecification:\n\nElectrically operated 220/240V 50/60Hz ac with control box,multi frequency handpiece with scaling tips,foot control,water connector, tube & other accessories. Capable of upto 20KHz ultrasonic vibrations/second or more\nISO 18397:2016/ ISO/FDA/CE 13485 OR EC Certificate | 265/DLVI | 75 | Single unit |
266 | 453 | UNC -15 Periodontal probe plastic\n\nSpecification:\n\n probe with Markings at 1-2-3-4-5-6-7-8-9-10-11-12-13-14-15Colour coded at 5,10 & 15mm, thin shanked probe | 266/DLVI | 27 | Single unit |
267 | 454 | UNC -15 Periodontal probe: titanium\n\nSpecification:\n\nprobe with Markings at 1-2-3-4-5-6-7-8-9-10-11-12-13-14-15Colour coded at 5,10 & 15mm, thin shanked probe\nconform to ISO 13485:2003/ EN ISO 13485:2012 ISO 13485 OR EC Certificate(directive 93/42/EEC) | 267/DLVI | 27 | Single unit |
268 | 455 | Universal columbia curette\n\nSpecification:\n\nCommon properties:\n1.triple tempered steel\n2.satin steel handle\n3.corrosion resistant\n4.rust resistant\n5.stain resistant\n6.can be sharpened by traditional sharpening stones\n7.properly designed & balanced handles to reduce chances of “carpal tunnel syndrome”\na) In different sizes \nHandle-10-11cm\nshank-2.7-3.2cm\nBlade-length-5.8-6.5mm, Width-1.3-1.6mm,90 degree offset angle\nSemicircular cross section with convex base \nb) In sizes of SC4R/4L6\nHandle-10-11cmShank-2.9-3.4-cm\nBlade-length-5.8-6.5mm, Width-1.3-1.6mm,\n90 degree offset angle\nSemicircular cross section with convex base. | 268/DLVI | 80 | Single unit |
269 | 456 | University of Michigan O probe\n\nSpecification:\n\nFor use in periodontal surgery\nSingle ended probe with markings at 3-6-8mm | 269/DLVI | 21 | Single unit |
270 | 457 | Upper canine Extraction forcep English pattern \n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip, disc /box type of hinge joint | 270/DLVI | 50 | Single unit |
271 | 458 | Upper incisor Extraction forcep English pattern\n\nSpecification:\n\nForcep made of hard stainless steel with knurnled handle grip,disc /box type of hinge joint | 271/DLVI | 50 | Single unit |
272 | 459 | Upper molar Extraction forcep English pattern\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip, disc /box type of hinge joint\nSet of one piece right & one piece left upper molar forcep | 272/DLVI | 50 | Single unit |
273 | 460 | Upper premolar Extraction forcep English pattern\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip, disc /box type of hinge joint | 273/DLVI | 50 | Single unit |
274 | 461 | Upper Roots forcep \n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip | 274/DLVI | 50 | Single unit |
275 | 462 | Upper universal forcep\n\nSpecification:\n\nmade of hard stainless steel with knurnled handle grip | 275/DLVI | 50 | Single unit |
276 | 463 | UV Steriliser\n\nSpecification:\n\nDimensions of cabinet: 22 x 12 x 8”\nFront door with uv protected glass window & magnetic door seal\nProvided with multiple tray racks not less than four\nElectrically operated\nProvided with UV light source | 276/DLVI | 23 | Single unit |
277 | 464 | Vacuum investment unit\n\nSpecification:\n\ncapable of mixing unit amount of investment material under vacuum through a motor | 277/DLVI | 14 | Single unit |
278 | 465 | Vacuum mixing machine\n \nSpecification:\n\n1. Vacuum mixing machine\nFor mixing investment material \n2. Electrically operated motor 1500 watts or more\n3. compact\n4. automatic regulation of the vacuum \n5. the mixing motor remains clean and is easily serviced due to a supporting filter and a fine filter in conjunction with the maintenance-free vacuum pump\n6. direct connection between mixing bowl and vacuum pump – no disturbing exterior hose\n7. mechanical coupling tolock the mixing bowl in position\n8. a mixing bowls (500 g )\nISO 13485 OR CE Certificate\n | 278/DLVI | 16 | Single unit with accessories |
279 | 466 | Vibrator\n\nSpecification:\n\n• Electrically operated - Size 4.5 x 8 x 6.5 inches or morePlatform Shaperectangular, Type Heavy Duty\n• ConstructionEnamel painted body with rubber plate above body,Speed: 3-Speed vibration controller\n• Platform Shaperectangular | 279/DLVI | 38 | Single unit |
280 | 467 | warwick james elevators\n\nSpecification:\n\nmade of hard stainless steel\nSet of 3 units right, left & straight tips | 280/DLVI | 65 | Single unit set of 3 instruments |
281 | 468 | Wax block storing cabinet \n\nSpecification:\n\nCabinet made out of Duro-board, externally clad in laminated sheet. Dust-proof door is lockable. Provided with smoothly sliding drawers with sixteen compartments each of size 4x4x2" and have puller knobs. Each compartment can store blocks in two rows. | 281/DLVI | 38 | Single unit |
282 | 469 | Wax burnout furnace\n\nSpecification:\n\nMaximum temp 1200C working temp 1150C with Digital Display cum temperature controller with safety alarm \nmuffle size : 175x175x225mm\n 4.0k.w | 282/DLVI | 10 | Single unit with accessories |
283 | 470 | Wax curver: PKT TYPE\n\nSpecification:\n\nSet of 5 instruments\n | 283/DLVI | 40 | Set of 5 pc |
284 | 471 | wax knife\n\nSpecification:\n\nMade of stainless steel\nWith one end bearing knife pointed & other thick, flat with curved end | 284/DLVI | 200 | Single unit |
285 | 472 | wax spatula\n\nSpecification:\n\nMade of stainless steel\nWith one end pointed & other end curved | 285/DLVI | 200 | Single unit |
286 | 473 | Weingart plier\n\nSpecification:\n\ntungsten carbide tipped\n | 286/DLVI | 38 | Single unit (PC) |
287 | 474 | Westcott Curved Tenotomy Scissors\n\nSpecification:\n\n19mm/21mm Made of stainless steel | 287/DLVI | 15 | Single unit |
288 | 475 | WHO Probe\n\nSpecification:\n\nA. Clinical\nB. Epidemiological\n\nA. Clinical – 0.5 mm ball at the tip, Making at 3.5mm,8.5mm,11.5 mm, Colour Coding 3.5-5.55 mm\nWeight – 5 gm\nB. Epidemiological- Marking at 3.5 mm & 5.5 mm\n0.5 mm ball at the tip | 288/DLVI | 65 | Pc of each type |
289 | 476 | Williams probe\n\nSpecification:\n\nFor use in periodontal surgeryth marking at 1,2,3,5,7,,9 & 10mm | 289/DLVI | 140 | Single unit |
290 | 477 | Wire cutter\n\nSpecification:\n\nmade of hard tempered steel\n | 290/DLVI | 60 | Single unit |
291 | 478 | Wire tucker\n\nSpecification:\n\nFor orthodontic work. Tungsten carbide tipped | 291/DLVI | 57 | Single unit (PC) |
292 | 479 | Wooden / Plastic slide boxes\n\nSpecification:\n\nFramework with finger joints fabricated out of teakwood with sunmica top and plywood bottom. Wooden grooves for standing 3”x1” glass slide in vertical position individually. Inside bottom covered with velvet and inside top with printed index. Provided with brass chromium plated hinges clips and card frame. Finished in natural color niro-cellulose lacquer. | 292/DLVI | 70 | Single unit |
293 | 480 | Wooden mallet\n\nSpecification:\n\nhaving wooden head that is10 cm in length, round at one end of diameter 3 cms while tapered at other end, handle length 28 cms\nFOR prosthodontic laboratory use | 293/DLVI | 200 | Single unit |
294 | 481 | Woodson Periosteal Elevator\n\nSpecification:\n\nDouble ended- one end curved(Curved working end- Length: 10-14 mm, width: 5-6mm)\nFlat Tapered end: Length – 14-16 mm, Width at the widest point- 4-6 mm | 294/DLVI | 19 | Single unit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail