Tender For Civil Works - Road Works :-Mr-N/19-20 Bagaha-1/07
Tender Value
2.16 Crore
Estimated cost
Bid Submission
19 Aug 2019
0 days left
EMD
4.32 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bagaha → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Civil Works - Road Works :-Mr-N / 19-20 Bagaha-1 / 07
BOQ
| Name of Work: MR-N/19-20 Bagaha-1/07 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Name of Road- Bharchhi to Taruanwa PCC Road\nClearing & Grubbing Road Land\nClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical Specification Clause 201.and direction of E/I | 1 | Nil | |
| 2 | 2 | By Manual Means | 1 | Nil | |
| 3 | 3 | In area of non-thorny jungle. | 1 | Hectare | |
| 4 | 4 | Scarifying Existing Bituminous Surface | 1 | Nil | |
| 5 | 5 | Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4. | 135 | Sqm | |
| 6 | 6 | Construction of Subgrade and Earthen Shoulders | 1 | Nil | |
| 7 | 7 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. | 828 | Cum | |
| 8 | 8 | Granular Sub-base with Well Graded Material (Table 400.1) | 1 | Nil | |
| 9 | 9 | ( By mix in place method ) For Grading II Material | 1 | Nil | |
| 10 | 10 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. | 1 | Nil | |
| 11 | 11 | Water Bound Macadam with Stone Screening Gr-II | 1 | Nil | |
| 12 | 12 | WBM Grading 2 ( By Mechanical Means) | 1 | Nil | |
| 13 | 13 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. | 33.75 | Cum | |
| 14 | 14 | WBM Grading 3 (By Mechanical Means ) | 1 | Nil | |
| 15 | 15 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. | 42.43 | Cum | |
| 16 | 16 | Prime Coat (Low porosity) | 1 | Nil | |
| 17 | 17 | Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. | 565.731 | Sqm | |
| 18 | 18 | Patch work over WBM using Mix seal surface for bituminous and Existing CC Pavement | 1 | Nil | |
| 19 | 19 | Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509. | 3595.74 | Sqm | |
| 20 | 20 | Tack Coat | 1 | Nil | |
| 21 | 21 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with Primer and clened with hydriloc broom as per technical specification aclouse 503. | 11170.7 | Sqm | |
| 22 | 22 | Semi-Dense Bituminous Concrete | 1 | Nil | |
| 23 | 23 | Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. | 189.375 | Cum | |
| 24 | 24 | SUB HEAD : ROAD FURNITURES , KM STONES , TRAFFIC & DIRECTION SIGN ,MMGSY LOGO | 1 | Nil | |
| 25 | 25 | Kilometre stone | 1 | Nil | |
| 26 | 26 | Reinforced cement concrete M15 grade kilometre local stone of standard design asper IRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. | 1 | Nil | |
| 27 | 27 | i) 5th km stone | 1 | Nil | |
| 28 | 28 | ii) Km stone | 3 | No. | |
| 29 | 29 | iii) 200 m stone | 7 | No. | |
| 30 | 30 | Direction and Place Identification signs with size more than 0.9 sqm size board | 1 | Nil | |
| 31 | 31 | Retro-reflectorised Traffic SignsProviding and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701. | 2.88 | Sqm | |
| 32 | 32 | Painting lines, Dashes, Arrows, etc. on Roads in Two Coats on Old Work | 1 | Nil | |
| 33 | 33 | Painting lines, dashes, arrows, etc. on roads in two coats on old work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and technical specification Clause 1702 | 10 | Each | |
| 34 | 34 | Retro-reflectorised Traffic Signs | 1 | Nil | |
| 35 | 35 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 | 1 | Nil | |
| 36 | 36 | 600 mm equilateral & triangle | 19 | Nos | |
| 37 | 37 | 600 mm circular | 5 | Nos | |
| 38 | 38 | 600 mm x 450 mm rectangular | 6 | Nos | |
| 39 | 39 | Boundary Pillar/Gaurd Post | 1 | Nil | |
| 40 | 40 | Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704 | 100 | Nos | |
| 41 | 41 | Printing New Letters and Figures of any Shade | 1 | Nil | |
| 42 | 42 | Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification Clause 1701 | 352 | per cm height per letter | |
| 43 | 43 | Planting of Trees and their Maintenance for one Year\n | 1 | Nil | |
| 44 | 44 | Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year | 100 | Each | |
| 45 | 45 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface | 1 | Nil | |
| 46 | 46 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. | 1 | Nil | |
| 47 | 47 | At Edge for BT Portion | 400 | Sqm | |
| 48 | 48 | (I)Providing and Fixing 'Logo' of Maintenance Project | 1 | Nil | |
| 49 | 49 | Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 | 1 | Nil | |
| 50 | 50 | Providing and Fixing 'Logo' of Maintenance Project | 2 | No. | |
| 51 | 51 | Parapet | 1 | No. | |
| 52 | 52 | 1 No. of SLAB CULVERT Size ( 2 m x 1.5 m) . = | 1 | No. | |
| 53 | 53 | 5 Year Maintenance Cost | 20 | Quaterly | |
| 54 | 54 | Add GST @ 12% | 1 | Total | |
| 55 | 55 | Add Labour cess @ 1% | 1 | Total | |
| 56 | 56 | Name of Road- Barwa se Chanki tak Pakki Sadak Nirman\nClearing & Grubbing Road Land\nClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical Specification Clause 201.and direction of E/I | 1 | Nil | |
| 57 | 57 | By Manual Means | 1 | Nil | |
| 58 | 58 | In area of non-thorny jungle. | 1 | Hectare | |
| 59 | 59 | Scarifying Existing Bituminous Surface | 1 | Nil | |
| 60 | 60 | Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4. | 393.188 | Sqm | |
| 61 | 61 | Construction of Subgrade and Earthen Shoulders | 1 | Nil | |
| 62 | 62 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. | 2411.55 | Cum | |
| 63 | 63 | Granular Sub-base with Well Graded Material (Table 400.1) | 1 | Nil | |
| 64 | 64 | ( By mix in place method ) For Grading II Material | 1 | Nil | |
| 65 | 65 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. | 17.27 | Cum | |
| 66 | 66 | Water Bound Macadam with Stone Screening Gr-II | 1 | Nil | |
| 67 | 67 | WBM Grading 2 ( By Mechanical Means) | 1 | Nil | |
| 68 | 68 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. | 78.63 | Cum | |
| 69 | 69 | WBM Grading 3 (By Mechanical Means ) | 1 | Nil | |
| 70 | 70 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. | 105.835 | Cum | |
| 71 | 71 | Prime Coat (Low porosity) | 1 | Nil | |
| 72 | 72 | Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. | 1411.13 | Sqm | |
| 73 | 73 | Patch work over WBM using Mix seal surface for bituminous and Existing CC Pavement | 1 | Nil | |
| 74 | 74 | Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509. | 3456.38 | Sqm | |
| 75 | 75 | Tack Coat | 1 | Nil | |
| 76 | 76 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with Primer and clened with hydriloc broom as per technical specification aclouse 503. | 18738.9 | Sqm | |
| 77 | 77 | Semi-Dense Bituminous Concrete | 1 | Nil | |
| 78 | 78 | Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. | 382.063 | Cum | |
| 79 | 79 | SUB HEAD : ROAD FURNITURES , KM STONES , TRAFFIC & DIRECTION SIGN ,MMGSY LOGO | 1 | Nil | |
| 80 | 80 | Kilometre stone | 1 | Nil | |
| 81 | 81 | Reinforced cement concrete M15 grade kilometre local stone of standard design asper IRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. | 1 | Nil | |
| 82 | 82 | i) 5th km stone | 1 | Nil | |
| 83 | 83 | ii) Km stone | 5 | No. | |
| 84 | 84 | iii) 200 m stone | 15 | No. | |
| 85 | 85 | Direction and Place Identification signs with size more than 0.9 sqm size board | 1 | Nil | |
| 86 | 86 | Retro-reflectorised Traffic SignsProviding and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701. | 2.88 | Sqm | |
| 87 | 87 | Painting lines, Dashes, Arrows, etc. on Roads in Two Coats on Old Work | 1 | Nil | |
| 88 | 88 | Painting lines, dashes, arrows, etc. on roads in two coats on old work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and technical specification Clause 1702 | 10 | Each | |
| 89 | 89 | Retro-reflectorised Traffic Signs | 1 | Nil | |
| 90 | 90 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 | 1 | Nil | |
| 91 | 91 | 600 mm equilateral & triangle | 32 | Nos | |
| 92 | 92 | 600 mm circular | 15 | Nos | |
| 93 | 93 | 600 mm x 450 mm rectangular | 15 | Nos | |
| 94 | 94 | Boundary Pillar/Gaurd Post | 1 | Nil | |
| 95 | 95 | Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704 | 120 | Nos | |
| 96 | 96 | Printing New Letters and Figures of any Shade | 1 | Nil | |
| 97 | 97 | Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification Clause 1701 | 352 | per cm height per letter | |
| 98 | 98 | Planting of Trees and their Maintenance for one Year\n | 1 | Nil | |
| 99 | 99 | Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year | 202 | Each | |
| 100 | 100 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface | 1 | Nil | |
| 101 | 101 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. | 1 | Nil | |
| 102 | 102 | At Edge for BT Portion | 807 | Sqm | |
| 103 | 103 | (I)Providing and Fixing 'Logo' of Maintenance Project | 1 | Nil | |
| 104 | 104 | Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 | 1 | Nil | |
| 105 | 105 | Providing and Fixing 'Logo' of Maintenance Project | 2 | No. | |
| 106 | 106 | Parapet | 2 | No. | |
| 107 | 107 | 5 Year Maintenance Cost | 20 | Quaterly | |
| 108 | 108 | Add GST @ 12% | 1 | Total | |
| 109 | 109 | Add Labour cess @ 1% | 1 | Total |
AI Tender Summary
Tender Timeline
Aug 06, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 19, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender