Tender For Establishment Of 1000 Mt Warehouse Along With Its Ancillary Works At Majuli
Tender Value
2.91 Crore
Estimated cost
Bid Submission
20 Aug 2019
0 days left
EMD
5.82 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karki Chuk, Lahon Gaon → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Establishment Of 1000 Mt Warehouse Along With Its Ancillary Works At Majuli
BOQ
| Name of Work: ESTABLISHMENT OF 1000 MT WAREHOUSE AND ANCILERIES AT MAJULI, DIST: MAJULI, ASSAM . | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | EARTHWORK IN EXCAVATION | |||
| 2 | 2 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. | |||
| 3 | 3 | (A) Up to a depth of 2.00m below the existing ground level. | |||
| 4 | 4 | (a) In ordinary soil | item1 | 527.03 | M3 |
| 5 | 5 | (B) Extra over item no.1.1(A) above for each 1m depth or part thereof beyond the initial depth of 2m | item2 | 29.43 | M3 |
| 6 | 6 | (a) Upto a depth of 1.5 metre | item3 | 1484.04 | M3 |
| 7 | 7 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. | |||
| 8 | 8 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | item4 | 2318.22 | M3 |
| 9 | 9 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. | |||
| 10 | 10 | (b) Other than Guwahati city | item5 | 168.52 | M3 |
| 11 | 11 | Extra lead per km truck carriage for sand gravel beyond the initial lead of 8 km. | item6 | 2479.43 | M3 |
| 12 | 12 | CEMENT CONCRETE WORKS: | |||
| 13 | 13 | PLAIN CEMENT CONCRETE WORKS | |||
| 14 | 14 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). | |||
| 15 | 15 | (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | item7 | 15.65 | M3 |
| 16 | 16 | (b) In prop 1cement: 4 sand :8 coarse aggregate by volume | item8 | 47.95 | M3 |
| 17 | 17 | (c) In prop 1 cement: 5 sand :10 coarse aggregate by volume | item9 | 0.6 | M3 |
| 18 | 18 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. | |||
| 19 | 19 | b) 50mm thick | item10 | 121.84 | M2 |
| 20 | 20 | c)100mm thick | item11 | 603.26 | M2 |
| 21 | 21 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | item12 | 57.94 | M2 |
| 22 | 22 | REINFORCED CEMENT CONCRETE WORKS | |||
| 23 | 23 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) | |||
| 24 | 24 | (I) Using Mixer Machine | |||
| 25 | 25 | (A) In substructure up to plinth level | |||
| 26 | 26 | Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. | |||
| 27 | 27 | N) Without using admixture, plasticiser | |||
| 28 | 28 | a) M15 grade concrete or Prop. 1:2:4 | item13 | 3.65 | M3 |
| 29 | 29 | b) M20 grade concrete or Prop. 1:1.5:3 | item14 | 187.79 | M3 |
| 30 | 30 | c) M25 grade concrete | item15 | 80.81 | M3 |
| 31 | 31 | (B) In super structure from plinth level up to 1st floor level. | |||
| 32 | 32 | ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. | |||
| 33 | 33 | N) Without using admixture, plasticiser | |||
| 34 | 34 | a) M15 grade concrete or Prop. 1:2:4 | item16 | 2.52 | M3 |
| 35 | 35 | b) M20 grade concrete or Prop. 1:1.5:3 | item17 | 45.89 | M3 |
| 36 | 36 | c) M25 grade concrete | item18 | 30.73 | M3 |
| 37 | 37 | i) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc. | |||
| 38 | 38 | N) Without using admixture, plasticiser | |||
| 39 | 39 | c) M25 grade concrete | item19 | 78.3 | M3 |
| 40 | 40 | iii) Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band. | |||
| 41 | 41 | b) M20 grade concrete or Prop. 1:1.5:3 | item20 | 0.4 | M3 |
| 42 | 42 | c) M25 grade concrete | item21 | 0.5 | M3 |
| 43 | 43 | Extra for using plasticiser in concrete if admixture, plasticiser etc are not included in the item rate | |||
| 44 | 44 | a) M15 grade concrete or Prop. 1:2:4 | item22 | 2.52 | M3 |
| 45 | 45 | c) M25 grade concrete | item23 | 183.93 | M3 |
| 46 | 46 | SHUTTERING & FORM WORK | |||
| 47 | 47 | TIMBER SHUTTERING ( FORM WORK) | |||
| 48 | 48 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: | |||
| 49 | 49 | Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. | |||
| 50 | 50 | (b) Using 25mm thick plank | item24 | 652.71 | M2 |
| 51 | 51 | Sides of tie beams, grade beams etc. at or below ground level. | |||
| 52 | 52 | (b) Using 25mm thick plank | item25 | 730.88 | M2 |
| 53 | 53 | Columns, Pillars, Posts & Strut | |||
| 54 | 54 | (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face | |||
| 55 | 55 | (ii) Using 25mm thick plank | item26 | 1295.21 | M2 |
| 56 | 56 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. | |||
| 57 | 57 | (a) For depth not exceeding 1.0M. | |||
| 58 | 58 | (ii) Using 25mm thick plank | item27 | 414.51 | M2 |
| 59 | 59 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. | |||
| 60 | 60 | (a) Floors etc. upto 200mm in thickness. | |||
| 61 | 61 | (ii) Using 25mm thick plank | item28 | 60.72 | M2 |
| 62 | 62 | Sloping or Battering sufaces such as sloped slabs etc. including folded plates. | |||
| 63 | 63 | (a) Where inclination to horizontal plane does not exceed 30o requiring shuttering only on the underside. | |||
| 64 | 64 | (ii) Using 25mm thick plank | item29 | 17.5 | M2 |
| 65 | 65 | Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like. | |||
| 66 | 66 | (ii) Using 25mm thick plank | item30 | 631.4 | M2 |
| 67 | 67 | Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc. | |||
| 68 | 68 | (ii) Using 25mm thick plank | item31 | 11 | M2 |
| 69 | 69 | Extra for each subsequent 1.0M height or part thereof beyond the initial height of 4.0M as mentioned in item no. 3.1.1 | item32 | 182.4 | M2 |
| 70 | 70 | Providing form work of ordinary timber planking and removal of the same in edges of slabs and breaks in floors and walls etc. of in-situ reinforced concrete works upto first floor level. | |||
| 71 | 71 | (a) Thickness not exceeding 200mm. | item33 | 50 | RM |
| 72 | 72 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.3(a). | item34 | 20 | RM |
| 73 | 73 | BRICK WORKS ( CONVENTIONAL / FLY ASH ) | |||
| 74 | 74 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. | |||
| 75 | 75 | (a).Brick on flat soling. | item35 | 203.67 | M2 |
| 76 | 76 | (c).BRICK SOLING (on edge soling) | item36 | 667.68 | M2 |
| 77 | 77 | (c).Stone soling of thickness 150mm. | item37 | 674.29 | M2 |
| 78 | 78 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. | |||
| 79 | 79 | (I) In Sub-structure upto plinth level including dewatering if necessary | |||
| 80 | 80 | (b) In proportion 1:4. | item38 | 112.99 | M3 |
| 81 | 81 | (II) In superstructure above plinth level up to 1st floor level. | |||
| 82 | 82 | (b) In proportion 1:4.(1 cement:4 sand) | item39 | 176.19 | M3 |
| 83 | 83 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) | |||
| 84 | 84 | (A) 112mm thick brick wall | |||
| 85 | 85 | (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | item40 | 1030.39 | M2 |
| 86 | 86 | CEMENT CONCRETE FLOORING | |||
| 87 | 87 | 40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed. | item41 | 105.16 | M2 |
| 88 | 88 | Providing and laying 65mm thick C.C. floor with metallic concrete hardener topping under layer of 50 mm thick cement concrete 1:2:4 (1cement:2 coarse sand:4 coarse aggregate of 20 mm and down) and top layer of 15mm thick of metallic cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggregate 6 mm and down) by volume with which metallic hardening compound of approved quality is mixed in the ratio of 4:1 (4 parts of cement: 1 part of metallic floor hardening compound of approved quality by weight) including finishing with curing complete as directed. | item42 | 610.87 | M2 |
| 89 | 89 | Providing and fixing glass strips in joints of cement concrete flooring /Terrazo flooring in all level | |||
| 90 | 90 | (a) 25 mm wide | |||
| 91 | 91 | (a) 4 mm thick | item43 | 1260 | RM |
| 92 | 92 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. | |||
| 93 | 93 | (a) 15 mm thick | item44 | 177.25 | M2 |
| 94 | 94 | TILES WORK | |||
| 95 | 95 | B) ON WALLS | |||
| 96 | 96 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). | |||
| 97 | 97 | a) Normal range \nSomany/ Orient/Nitco/Asian Make | |||
| 98 | 98 | i) Of size 200mmx200mm and above | item45 | 61.81 | M2 |
| 99 | 99 | ANTISKID TILES | |||
| 100 | 100 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. | |||
| 101 | 101 | (A) CERAMIC | |||
| 102 | 102 | i)Normal range (Sizes 300 mm x 300mm and above) | |||
| 103 | 103 | (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate | item46 | 25.53 | M2 |
| 104 | 104 | CEMENT PLASTERING | |||
| 105 | 105 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed | |||
| 106 | 106 | a) In cement mortar 1:3 | item47 | 16 | M2 |
| 107 | 107 | b) In cement mortar 1:4 | item48 | 2149.97 | M2 |
| 108 | 108 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | |||
| 109 | 109 | A) On rough side | |||
| 110 | 110 | a) In cement mortar 1:3 | item49 | 31 | M2 |
| 111 | 111 | b) In cement mortar 1:4 | item50 | 1714.39 | M2 |
| 112 | 112 | Extra over item no 6.2.1 to 6.2.3 for providing and mixing water proofing materials in cement mortar in prop as recommended by the manufacturer including curing complete as directed. | |||
| 113 | 113 | i) 10 mm thick plaster | |||
| 114 | 114 | b) In cement mortar 1:4 | item51 | 2064.61 | M2 |
| 115 | 115 | ii) 15 mm thick plaster | |||
| 116 | 116 | b) In cement mortar 1:4 | item52 | 1692.24 | M2 |
| 117 | 117 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | item53 | 29 | M2 |
| 118 | 118 | 15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed. | |||
| 119 | 119 | A) Up to 300 mm width | |||
| 120 | 120 | a) Flush band | item54 | 6 | M2 |
| 121 | 121 | Ceiling with Exposed Metal (G.I.) Frame work with E-Grid - 2430 | |||
| 122 | 122 | Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Board as per IS 14862, to be placed in a grid of G.I. system duly suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge. | |||
| 123 | 123 | Finally, if specified, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer before installing it on the grid. | |||
| 124 | 124 | (A) Standard Ceilings of Everest make or equivalent as directed by the departement | |||
| 125 | 125 | (ii) Using 6 mm thick FC Board | item55 | 68.58 | M2 |
| 126 | 126 | ROOFING SHEET | |||
| 127 | 127 | Providing 13 mm mesh hexagonal wire net made of one I.S. designation (1mm dia) wire above post plate in eaves with 1st class (Hollock/Bonsum) timber frame to fit exactly with the corrugation of roofing sheet including painting two coats with approved paint to timber works complete as directed. | item56 | 45.3 | M2 |
| 128 | 128 | Supplying, fitting and fixing wind ties with 40mm x6mm M.S. flat iron and necessary 10 mm dia G.I hook bolt, G.I flat washer and bitumen washer etc. complete including two coats painting with red oxide anticorrosive paint. | item57 | 336 | RM |
| 129 | 129 | Providing bracket made out of M.S. flat, bent to proper size and shape as per drawing and fitting with necessary bolts, nuts, sand washers etc. for fixing A.C / G.I. sheet gutters with purlins. | item58 | 100 | Kg |
| 130 | 130 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement | |||
| 131 | 131 | (iii) 0.50 mm thick | item59 | 1399.07 | M2 |
| 132 | 132 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. | |||
| 133 | 133 | (iii) 0.50 mm thick | item60 | 56 | RM |
| 134 | 134 | ROOF TREATMENT | |||
| 135 | 135 | Grading roof for water proofing treatment with | |||
| 136 | 136 | (a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size) | item61 | 0.5 | M3 |
| 137 | 137 | BARGE BOARD | |||
| 138 | 138 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | item62 | 202 | RM |
| 139 | 139 | BLOCK BOARD SHUTTERS | |||
| 140 | 140 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. | |||
| 141 | 141 | a) Decorative type face panel and block board core. | |||
| 142 | 142 | (ii) 35 mm thick . | item63 | 23.94 | M2 |
| 143 | 143 | M.S GRILL WORK | |||
| 144 | 144 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. | |||
| 145 | 145 | I . Plain grill | |||
| 146 | 146 | (c) Fixed to Brickwork/P.C.C/R.C.C. | item64 | 2309.5 | KG |
| 147 | 147 | P.V.C. DOORS & DOOR FRAMES | |||
| 148 | 148 | Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levels. | item65 | 26.5 | RM |
| 149 | 149 | Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately) | |||
| 150 | 150 | a) 24mm thick | item66 | 8.09 | M2 |
| 151 | 151 | DISTEMPERING | |||
| 152 | 152 | f) Distempering with dry distemper of approved brand and manufacture(two coats)and of required shade on new wall surface to give an even shade, over and including priming coat of white primer after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. | item67 | 652.29 | M2 |
| 153 | 153 | i). Extra over item no (f), (g) and (h) above for distempering every subsequent coat of distempering with dry distemper of approved brand and manufacture. | item68 | 652.29 | M2 |
| 154 | 154 | j). Extra over item no. (f) above for distempering with dry distemper on ceiling and or sloping roof. | item69 | 9.92 | M2 |
| 155 | 155 | CEMENT PAINT & PRIMER | |||
| 156 | 156 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item70 | 1502.34 | M2 |
| 157 | 157 | b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | item71 | 1502.34 | M2 |
| 158 | 158 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) | |||
| 159 | 159 | (i) Thickness = 1.5 mm thick | item72 | 2254.5 | M2 |
| 160 | 160 | PAINTING ON WOOD AND WOOD WOOD BASED SURFACES | |||
| 161 | 161 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | |||
| 162 | 162 | (a). With ready mixed paint , Wood primer (pink) | item73 | 182 | M2 |
| 163 | 163 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. | |||
| 164 | 164 | (i).Surfaces over 100mm in width or girth. | |||
| 165 | 165 | a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item74 | 182 | M2 |
| 166 | 166 | PAINTING ON STEEL AND OTHER METAL SURFACE | |||
| 167 | 167 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. | |||
| 168 | 168 | a). With ready mixed \"red-lead/ red oxide\" primer. | item75 | 2116.2 | M2 |
| 169 | 169 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. | |||
| 170 | 170 | (i).Surfaces over 100mm in width or girth. | |||
| 171 | 171 | a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item76 | 2116.2 | M2 |
| 172 | 172 | (ii).Surfaces up to 100mm in width or girth. | |||
| 173 | 173 | a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item77 | 124 | RM |
| 174 | 174 | SPECIAL WATHER PROOF COLOURING | |||
| 175 | 175 | Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Dulux (ICI) paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | item78 | 1728.16 | M2 |
| 176 | 176 | ALUMINIUM FITTINGS | |||
| 177 | 177 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) | |||
| 178 | 178 | a) Sliding door bolts | |||
| 179 | 179 | i) 300mm x 16mm | item79 | 16 | Each |
| 180 | 180 | b) Tower bolts | |||
| 181 | 181 | i) 300mm x 12mm | item80 | 18 | Each |
| 182 | 182 | c) Door handles | |||
| 183 | 183 | iii) 150mm | item81 | 28 | Each |
| 184 | 184 | GLASS FITTING | |||
| 185 | 185 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) | |||
| 186 | 186 | (2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2. | |||
| 187 | 187 | (b). 4.00mm thick. | item82 | 40.63 | M2 |
| 188 | 188 | REINFORCEMENT | |||
| 189 | 189 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) | |||
| 190 | 190 | a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL | |||
| 191 | 191 | (ii)Super Ductile (SD) TMT reinforcement bars | item83 | 497.95 | QTL |
| 192 | 192 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | item84 | 1.95 | QTL |
| 193 | 193 | BEAMS AND JOISTS | |||
| 194 | 194 | Structural steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. | |||
| 195 | 195 | b) In flat up to 25mm thickness | item85 | 3 | QTL |
| 196 | 196 | c) In M.S. angles, channels, Tees etc. | item86 | 4 | QTL |
| 197 | 197 | M.S. ROOF TRUSS | |||
| 198 | 198 | Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. | |||
| 199 | 199 | b) Using other ISI marked approved brand tube | item87 | 214.56 | QTL |
| 200 | 200 | ROLLING SHUTTERS | |||
| 201 | 201 | Providing and fixing rolling shutters of approved make made of 80mm wide M.S. laths interlocked together through their entire lenth and jointed together at the ends by end-locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters. | item88 | 36 | M2 |
| 202 | 202 | WINDOWS / VENTILATORS | |||
| 203 | 203 | Providing, fitting and fixing steel windows/ ventilators (openable) of standard rolled steel sections as per relevant I.S. Code-1038 joints mitred and welded with 15mmx3mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device and steel handles, peg stays of 300mm long etc. complete as per drawing including applying a priming coat of red-lead paint. | item89 | 28.87 | M2 |
| 204 | 204 | VENTILATOR | |||
| 205 | 205 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | item90 | 11.76 | M2 |
| 206 | 206 | ANGLES/ FLATS/ BOLTS AND NUTS | |||
| 207 | 207 | Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. | |||
| 208 | 208 | a) M. S. Angles……. | item91 | 1.1 | QTL |
| 209 | 209 | b) M. S. Flats……. | item92 | 1.3 | QTL |
| 210 | 210 | c) M. S. bolts & nuts……. | item93 | 2.1 | QTL |
| 211 | 211 | DOOR FRAMES | |||
| 212 | 212 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | item94 | 58.2 | RM |
| 213 | 213 | PLINTH PROTECTION AND DRAIN | |||
| 214 | 214 | Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | item95 | 77.2 | M2 |
| 215 | 215 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | |||
| 216 | 216 | i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm. | item96 | 105 | RM |
| 217 | 217 | MACHINE DRIVEN PILES | |||
| 218 | 218 | Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately as per item no. 21.4.1) | |||
| 219 | 219 | C) UNIFORM PILE | |||
| 220 | 220 | (II) Concret garade M25 | |||
| 221 | 221 | iii) Pile dia 400 mm | item97 | 532 | RM |
| 222 | 222 | Empty boring for specified diameter piles from ground level to cut-off level. | |||
| 223 | 223 | d) Pile Dia 400 mm | item98 | 76 | RM |
| 224 | 224 | REINFORCEMENT | |||
| 225 | 225 | Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc) | |||
| 226 | 226 | (B) TMT bar of other ISI marked (From Secondary producer) | item99 | 83.03 | QTL |
| 227 | 227 | LOAD TEST ON PILES | |||
| 228 | 228 | ROUTINE TESTS | |||
| 229 | 229 | Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load) | item100 | 23.12 | TON |
| 230 | 230 | Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load) | item101 | 38.53 | TON |
| 231 | 231 | Integrity testing of pile using low strain/ sonic integrity test/sonic echo test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust and chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of engineer in charge. | item102 | 8 | EACH TEST |
| 232 | 232 | Demolishing R.C.C./ P.C.C. pile head of different diameters carefully without disturbing the remaining portion of the pile including opening out of the pile head to be demolished by excavating the earth upto required depth and clearing the debris as directed. | item103 | 9.55 | M3 |
| 233 | 233 | Jungle clearance including up-rooting of vegetation, grass, brush-wood, saplings and trees not exceeding 300 mm girth and disposal of the same outside the periphery and lift upto 1500 mm. | item104 | 3780 | M2 |
| 234 | 234 | Providing and fixing galvd. / M.S. tube (light grade) outlet (spout) in cement mortar 1:3 including cutting and making good the wall | |||
| 235 | 235 | (a).25mm bore - 300mm long. | item105 | 6 | EACH |
| 236 | 236 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. | |||
| 237 | 237 | b) 75mm thick slab | item106 | 29.4 | M2 |
| 238 | 238 | a) 100mm thick slab | item107 | 3 | M2 |
| 239 | 239 | Precast concrete block masonry (includingquoin blocks, jamb blocks, closure etc.) with hollow cement concrete blocks of approved size conforming to I.S. 2185 - 1965 with1:6mix (1cement: 6 graded stone aggregate, 20 mm and down gauge) 1/4th having solid materials not less than 50% total volume of block including curing complete as directed. | |||
| 240 | 240 | (c) 100mm thick in super structure in cement morter (1:4) | item108 | 2 | M2 |
| 241 | 241 | PRE CONSTRUCTION ANTI - TERMITE TREATMENT | |||
| 242 | 242 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. | |||
| 243 | 243 | a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item109 | 194.21 | M2 |
| 244 | 244 | Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. | |||
| 245 | 245 | a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item110 | 34.56 | M2 |
| 246 | 246 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. | |||
| 247 | 247 | a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item111 | 720.9 | M2 |
| 248 | 248 | Pre construction anti - termite treatment by applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmx30mm all over the walls and making rod holes @ 150mm apart up to ground level below and applying emulsion @ 11 litres per square meter of vertical plinth wall surface inside the building so as to soak the soil with the emulsion up to the ground level and refill the holes and channel with the original materials obtained in making channels (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. | |||
| 249 | 249 | a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item112 | 110 | M2 |
| 250 | 250 | Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. | |||
| 251 | 251 | a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item113 | 178 | RM |
| 252 | 252 | AIR INLET | item114 | 6 | EACH |
| 253 | 253 | TURBO VENTILATION | item115 | 6 | EACH |
| 254 | 254 | DEEP TUBE WELL | |||
| 255 | 255 | Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container (container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost). | item116 | 60 | RM |
| 256 | 256 | Machine boring of deep tube well upto 400 mm dia. Bore hole as directed by the Engineer in Charge | item117 | 60 | RM |
| 257 | 257 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. | |||
| 258 | 258 | PVC PIPE | |||
| 259 | 259 | SUPREME /PRINCE / FUSION /SFMC Brand | |||
| 260 | 260 | viii) 200mm diameter | item118 | 3 | RM |
| 261 | 261 | vii) 160mm diameter | item119 | 60 | RM |
| 262 | 262 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. | |||
| 263 | 263 | PVC PIPE | |||
| 264 | 264 | SUPREME / PRINCE / FUSION /SFMC Brand | |||
| 265 | 265 | iv) 50mm diameter | item120 | 40 | RM |
| 266 | 266 | Supplying fitting and fixing ISI approved PVC filter 3.00 metre long. | |||
| 267 | 267 | a) 50mm dia | item121 | 10 | EACH |
| 268 | 268 | VALVE | |||
| 269 | 269 | Supplying fitting and fixing check valve (non return valve) including thread to pipes. | |||
| 270 | 270 | iv) 50mm diameter | item122 | 1 | EACH |
| 271 | 271 | Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained | item123 | 1 | JOB |
| 272 | 272 | Flushing, clearing, washing and watering of the tube well | item124 | 1 | JOB |
| 273 | 273 | Supplying and packing pea gravel around the periphery of casing including screening washing etc. all complete as directed. | item125 | 8 | M3 |
| 274 | 274 | EARTH FILLING | |||
| 275 | 275 | EMBANKMENT CONSTRUCTION WITH MATERIAL | |||
| 276 | 276 | Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with a lifts Upto 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirment of table 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 | |||
| 277 | 277 | From private land | item126 | 11660 | M3 |
| 278 | 278 | EXTRA LEAD ( 3.0 KM CONSIDERED) | |||
| 279 | 279 | Haulage excluding loading and un-loading. | |||
| 280 | 280 | Haulage of materials by tipper excluding cost of loading, unloading and stacking. | item127 | 11660 | M3 |
| 281 | 281 | ROAD / YARD | |||
| 282 | 282 | Granular Sub-base with Well Graded Material ( Table 400.1 ) ( Only for PMGSY work ) | |||
| 283 | 283 | ( Construction of granular sub base by providing well graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification cl. 401 | |||
| 284 | 284 | (ii) For Grading II Material | item128 | 379.5 | M3 |
| 285 | 285 | 3) WBM Grading-3 | |||
| 286 | 286 | Using stone screening Type-A 13.2 mm for Gr. 3 | |||
| 287 | 287 | Providing laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical specification clause 405 | |||
| 288 | 288 | A) By manual Means | item129 | 253 | M3 |
| 289 | 289 | Inter locking concrete block pavement | |||
| 290 | 290 | Providing and laying interlocking Concrete Block Pavement having thickness 80mm as per drawing and Technical specification clause 1504 | item130 | 2530 | M2 |
| 291 | 291 | CONCRETE EDGE | |||
| 292 | 292 | SIZE: 100 mm x 200 mm | |||
| 293 | 293 | Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803,1202 & 1203 | |||
| 294 | 294 | P.C.C. grade M20 | |||
| 295 | 295 | Nominal mix ( 1:2:4 ) | item131 | 31.63 | M3 |
| 296 | 296 | Miscellaneous Works | |||
| 297 | 297 | Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | item132 | 2530 | M2 |
| 298 | 298 | ENTRANCE GATE | |||
| 299 | 299 | Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts). | item133 | 36 | QTL |
| 300 | 300 | Providing rails for plying of rollers of gate made made from 50mm x 6mm size M.S. flat and to be fitted with 3 nos of hinged hold fasts to be embedded in concrete prop. 1:2:4 of 10mm wide and 75 mm deep over brick flat soling 250mm wide including curing etc. complete. | item134 | 48 | RM |
| 301 | 301 | Providing roller to the gate including welding etc.complete | |||
| 302 | 302 | a) With 25mmx50mm (dia) roller | item135 | 12 | EACH |
| 303 | 303 | b) With 12.50mmx50mm (dia) roller | item136 | 8 | EACH |
| 304 | 304 | WATER SUPPLY AND SANITARY WORKS. | |||
| 305 | 305 | EUROPEAN TYPE WATER CLOSET | |||
| 306 | 306 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) | |||
| 307 | 307 | A) Parryware make | |||
| 308 | 308 | a) White | |||
| 309 | 309 | (i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover) | item137 | 3 | EACH |
| 310 | 310 | INDIAN TYPE WATER CLOSET | |||
| 311 | 311 | Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) | |||
| 312 | 312 | Indian type W.C Orissa pattern of size 580 x 440 mm | |||
| 313 | 313 | a) White | |||
| 314 | 314 | i) Parryware make | item138 | 2 | EACH |
| 315 | 315 | AUTOMATIC FLUSHING CISTERN | |||
| 316 | 316 | Supplying, fiting and fixing automatic flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) | |||
| 317 | 317 | ii) Hindware make | |||
| 318 | 318 | a) White | |||
| 319 | 319 | Auto Cister 10 litre (Cat. No.C61002) | item139 | 2 | EACH |
| 320 | 320 | URINAL | |||
| 321 | 321 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. | |||
| 322 | 322 | (A) Parryware Make | |||
| 323 | 323 | a) White | |||
| 324 | 324 | (iv) Flat Back (Cat. No.C0501/72) | item140 | 1 | EACH |
| 325 | 325 | PVC FLUSHING CISTERN | |||
| 326 | 326 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) | |||
| 327 | 327 | (A) Parryware Make | |||
| 328 | 328 | a) White | |||
| 329 | 329 | (i)Economy Single Flush (Cat No.C8090/C8055) | item141 | 3 | EACH |
| 330 | 330 | WASH BASIN | |||
| 331 | 331 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) | |||
| 332 | 332 | PEDESTAL BASIN (with pedestal) | |||
| 333 | 333 | (A) Parryware Make | |||
| 334 | 334 | (iv) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380) | item142 | 5 | EACH |
| 335 | 335 | KITCHEN SINK (STAINLESS STEEL) | |||
| 336 | 336 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately | |||
| 337 | 337 | (ii) Single Bowl with Drain Board (400 x 200) Flat Edge - Glossy (Cat.No.C8537) | item143 | 3 | EACH |
| 338 | 338 | MIRROR | |||
| 339 | 339 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | item144 | 5 | EACH |
| 340 | 340 | SHELF | |||
| 341 | 341 | Glass shelf with C.P. guard rail | |||
| 342 | 342 | (ii) Sona make (Cat. No.TR-0701) | |||
| 343 | 343 | (a) 450mm | item145 | 3 | EACH |
| 344 | 344 | SOAP TRAY,SOAP DISH,LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER | |||
| 345 | 345 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. | |||
| 346 | 346 | (a) Parryware Make | |||
| 347 | 347 | (i) Recess SP & SG dish (Cat.No. C9935) | item146 | 3 | EACH |
| 348 | 348 | (ii) Wall Soap tray (Cat. No.C9951) | item147 | 2 | EACH |
| 349 | 349 | TOWEL RAIL,TOWEL RACK & TOWEL RING | |||
| 350 | 350 | Providing, fitting and fixing CP towel rail complete as directed and specified. | |||
| 351 | 351 | (b) Sona make | |||
| 352 | 352 | (i) Towel rail Diplomat 300mm long (Cat.No.TR-0605) | item148 | 2 | EACH |
| 353 | 353 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. | |||
| 354 | 354 | (b) Sona make | |||
| 355 | 355 | (i) Towel ring round (Cat.No.TR-06051) | item149 | 5 | EACH |
| 356 | 356 | TOILET PAPER HOLDER | |||
| 357 | 357 | Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified. | |||
| 358 | 358 | (a) Jaquar make | |||
| 359 | 359 | (i) Continental toilet paper holder (Cat.No. ACN-1151N) | item150 | 3 | EACH |
| 360 | 360 | WASTE COUPLING | |||
| 361 | 361 | Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. | |||
| 362 | 362 | (b) Sona | |||
| 363 | 363 | (i) Rupa 32mm (HT/ FT) (Cat.No.WS-0801) | item151 | 5 | EACH |
| 364 | 364 | BOTTLE TRAP | |||
| 365 | 365 | Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. | |||
| 366 | 366 | (b) Sona make | |||
| 367 | 367 | (i) Bottle trap indian 32mm (Cat. No.BT-0751) | item152 | 5 | EACH |
| 368 | 368 | Providing, fitting and fixing Chrome Plated bottle trap pipe complete as directed and specified. | |||
| 369 | 369 | (b) Sona make | |||
| 370 | 370 | (i) Pipe for bottle trap 300mm long (Cat. No.BT-0761) | item153 | 5 | EACH |
| 371 | 371 | PVC PIPES,BENDS,JUNCTIONS,TEES ETC. | |||
| 372 | 372 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. | |||
| 373 | 373 | a) In exposed surfaces or in trenches. | |||
| 374 | 374 | (ii) 110mm dia. | item154 | 110 | RM |
| 375 | 375 | (iv) 75mm dia. | item155 | 288 | RM |
| 376 | 376 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | |||
| 377 | 377 | (ii) 110mm dia. | item156 | 115 | RM |
| 378 | 378 | (iv) 75mm dia. | item157 | 85 | RM |
| 379 | 379 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. | |||
| 380 | 380 | a) In exposed surfaces or in trenches. | |||
| 381 | 381 | (ii) 110mm dia. | item158 | 1 | EACH |
| 382 | 382 | (iv) 75mm dia. | item159 | 1 | EACH |
| 383 | 383 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | |||
| 384 | 384 | (ii) 110mm dia. | item160 | 1 | EACH |
| 385 | 385 | (iv) 75mm dia. | item161 | 1 | EACH |
| 386 | 386 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | |||
| 387 | 387 | a) In exposed surfaces or in trenches. | |||
| 388 | 388 | (ii) 110mm dia. | item162 | 1 | EACH |
| 389 | 389 | (iv) 75mm dia. | item163 | 1 | EACH |
| 390 | 390 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | |||
| 391 | 391 | (ii) 110mm dia. | item164 | 1 | EACH |
| 392 | 392 | (iv) 75mm dia. | item165 | 1 | EACH |
| 393 | 393 | Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | |||
| 394 | 394 | a) In exposed surfaces or in trenches. | |||
| 395 | 395 | (ii) 110mm dia. | item166 | 3 | EACH |
| 396 | 396 | (iv) 75mm dia. | item167 | 3 | EACH |
| 397 | 397 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | |||
| 398 | 398 | (ii) 110mm dia. | item168 | 2 | EACH |
| 399 | 399 | (iv) 75mm dia. | item169 | 1 | EACH |
| 400 | 400 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | |||
| 401 | 401 | a) In exposed surfaces or in trenches. | |||
| 402 | 402 | (ii) 110mm dia. | item170 | 3 | EACH |
| 403 | 403 | (iv) 75mm dia. | item171 | 2 | EACH |
| 404 | 404 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | |||
| 405 | 405 | (ii) 110mm dia. | item172 | 2 | EACH |
| 406 | 406 | (iv) 75mm dia. | item173 | 2 | EACH |
| 407 | 407 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | |||
| 408 | 408 | a) In exposed surfaces or in trenches. | |||
| 409 | 409 | (ii) 110mm dia. | item174 | 1 | EACH |
| 410 | 410 | (iv) 75mm dia. | item175 | 1 | EACH |
| 411 | 411 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | |||
| 412 | 412 | (ii) 110mm dia. | item176 | 1 | EACH |
| 413 | 413 | (iv) 75mm dia. | item177 | 1 | EACH |
| 414 | 414 | Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | |||
| 415 | 415 | a) In exposed surfaces or in trenches. | |||
| 416 | 416 | (ii) 110mm dia. | item178 | 1 | EACH |
| 417 | 417 | (iv) 75mm dia. | item179 | 1 | EACH |
| 418 | 418 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | |||
| 419 | 419 | (ii) 110mm dia. | item180 | 1 | EACH |
| 420 | 420 | (iv) 75mm dia. | item181 | 1 | EACH |
| 421 | 421 | Supplying fiting and fixing PVC single ‘Y’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | |||
| 422 | 422 | a) In exposed surfaces or in trenches. | |||
| 423 | 423 | (ii) 110mm dia. | item182 | 1 | EACH |
| 424 | 424 | (iv) 75mm dia. | item183 | 1 | EACH |
| 425 | 425 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | |||
| 426 | 426 | (iv) 75mm dia. | item184 | 1 | EACH |
| 427 | 427 | Supplying fiting and fixing PVC double ‘Y’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | |||
| 428 | 428 | a) In exposed surfaces or in trenches. | |||
| 429 | 429 | (iv) 75mm dia. | item185 | 1 | EACH |
| 430 | 430 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | |||
| 431 | 431 | (ii) 110mm dia. | item186 | 1 | EACH |
| 432 | 432 | (iv) 75mm dia. | item187 | 1 | EACH |
| 433 | 433 | Supplying fiting and fixing PVC cross ‘T’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | |||
| 434 | 434 | a) In exposed surfaces or in trenches. | |||
| 435 | 435 | (i) 110mm x110mm | item188 | 1 | EACH |
| 436 | 436 | (ii) 75 mm x 75mm | item189 | 1 | EACH |
| 437 | 437 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | |||
| 438 | 438 | (i) 110mm x110mm | item190 | 1 | EACH |
| 439 | 439 | (ii) 75 mm x 75mm | item191 | 1 | EACH |
| 440 | 440 | Supplying fiting and fixing PVC cross ‘T’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | |||
| 441 | 441 | a) In exposed surfaces or in trenches. | |||
| 442 | 442 | (i) 110 mm dia | item192 | 3 | EACH |
| 443 | 443 | (iii) 75 mm dia | item193 | 3 | EACH |
| 444 | 444 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | |||
| 445 | 445 | (i) 110 mm dia | item194 | 2 | EACH |
| 446 | 446 | (iii) 75 mm dia | item195 | 2 | EACH |
| 447 | 447 | Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | |||
| 448 | 448 | a) In exposed surfaces or in trenches. | |||
| 449 | 449 | (iv) 110 mm x 75mm | item196 | 2 | EACH |
| 450 | 450 | (viii) 75 mm x 63mm | item197 | 2 | EACH |
| 451 | 451 | Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified. | |||
| 452 | 452 | (a) 110 mm | item198 | 3 | EACH |
| 453 | 453 | (b) 75 mm | item199 | 3 | EACH |
| 454 | 454 | COWEL | |||
| 455 | 455 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. | |||
| 456 | 456 | (iii) 90mm dia. PVC cowel of ISI make | item200 | 5 | EACH |
| 457 | 457 | GRATING | |||
| 458 | 458 | Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. | |||
| 459 | 459 | (a) 110mm dia | item201 | 5 | EACH |
| 460 | 460 | (b) 75mm dia | item202 | 3 | EACH |
| 461 | 461 | MANHOLE COVER | |||
| 462 | 462 | Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 19 Kg. weight complete as directed and specified | item203 | 8 | EACH |
| 463 | 463 | SOAK PIT AND INSPECTION CHAMBER | |||
| 464 | 464 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | item204 | 21 | M3 |
| 465 | 465 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | item205 | 11 | EACH |
| 466 | 466 | INTERNAL WATER SUPPLY WORKS | |||
| 467 | 467 | PIPING | |||
| 468 | 468 | Providing and fixing 3 layer (Outer green / GREY coloured UV Stabilised, middle black coloured UV Stabilised and inermost layer white coloured with antimicrobial property) Fusion welded PP-R ( Poly propylene-random copolymer) Pipes, SDR 7.4 having thermal stability for hot and cold water supply conforming IS 15801-2008 including all plain PP-R fittings and brass threaded PP-R fitting and clamping, cutting and making good to the damages. | |||
| 469 | 469 | (A) Exposed or in trenches | |||
| 470 | 470 | SFMC/ FUSION brand or other brand of equivalent quality. | |||
| 471 | 471 | a) PN-16 Pipe,16mm OD,SDR-7.4 | item206 | 85 | RM |
| 472 | 472 | b) PN-16 Pipe,20 mm OD,SDR-7.4 | item207 | 80 | RM |
| 473 | 473 | c) PN-16 Pipe,25 mm OD,SDR-7.4 | item208 | 70 | RM |
| 474 | 474 | f) PN-16 Pipe,32 mm OD,SDR-7.4 | item209 | 55 | RM |
| 475 | 475 | e) PN-16 Pipe,40 mm OD,SDR-7.4 | item210 | 73 | RM |
| 476 | 476 | f) PN-16 Pipe,50 mm OD,SDR-7.4 | item211 | 75 | RM |
| 477 | 477 | (B) Concealed pipe with cutting chases & making good the walls | |||
| 478 | 478 | SFMC/ FUSION brand or other brand of equivalent quality. | |||
| 479 | 479 | a) PN-16 Pipe,16mm OD,SDR-7.4 | item212 | 80 | RM |
| 480 | 480 | b) PN-16 Pipe,20 mm OD,SDR-7.4 | item213 | 85 | RM |
| 481 | 481 | c) PN-16 Pipe,25 mm OD,SDR-7.4 | item214 | 65 | RM |
| 482 | 482 | f) PN-16 Pipe,32 mm OD,SDR-7.4 | item215 | 55 | RM |
| 483 | 483 | e) PN-16 Pipe,40 mm OD,SDR-7.4 | item216 | 70 | RM |
| 484 | 484 | f) PN-16 Pipe,50 mm OD,SDR-7.4 | item217 | 80 | RM |
| 485 | 485 | BIB COCK | |||
| 486 | 486 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) | |||
| 487 | 487 | Essco make (Delux/Sumthing spl./Tropical) | |||
| 488 | 488 | (a) Bib cock short body | item218 | 10 | EACH |
| 489 | 489 | STOP COCK | |||
| 490 | 490 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) | |||
| 491 | 491 | I) Brass stop cock (heavy) of Sant make | |||
| 492 | 492 | (i)15mm dia | item219 | 5 | EACH |
| 493 | 493 | (ii)20mm dia | item220 | 5 | EACH |
| 494 | 494 | (iii) 25mm dia | item221 | 5 | EACH |
| 495 | 495 | (iv)32mm dia | item222 | 4 | EACH |
| 496 | 496 | (v) 40mm dia | item223 | 4 | EACH |
| 497 | 497 | (v) 50mm dia | item224 | 4 | EACH |
| 498 | 498 | PUSH BIB COCK | |||
| 499 | 499 | Supplying fitting and fixing push bib cock 15mm dia complete as directed and specified as follows. (pipes will be measured and paid separately). | |||
| 500 | 500 | a) C.P.C.H. | |||
| 501 | 501 | (a) Light type | item225 | 5 | EACH |
| 502 | 502 | PILLAR COCK | |||
| 503 | 503 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. | |||
| 504 | 504 | SONA make | |||
| 505 | 505 | (a) Light type | item226 | 5 | EACH |
| 506 | 506 | SHOWER | |||
| 507 | 507 | Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately) | |||
| 508 | 508 | SONA make | |||
| 509 | 509 | (a) Telephone shower delux with 1m PVC tube and wall hook | item227 | 3 | EACH |
| 510 | 510 | VALVE | |||
| 511 | 511 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. | |||
| 512 | 512 | a) 50mm dia | item228 | 5 | EACH |
| 513 | 513 | b) 40 mm dia. | item229 | 4 | EACH |
| 514 | 514 | c) 25 mm dia. | item230 | 3 | EACH |
| 515 | 515 | d) 2O mm dia. | item231 | 3 | EACH |
| 516 | 516 | e) 15 mm dia. | item232 | 3 | EACH |
| 517 | 517 | Supplying and fitting ball valve as specified and directed.. | |||
| 518 | 518 | a) 25 mm dia. (gun metal) | item233 | 3 | EACH |
| 519 | 519 | b) 20mm dia. (gun metal/Copper) | item234 | 3 | EACH |
| 520 | 520 | Supplying fitting and fixing gun metal check valve including necessary threads to pipes. | |||
| 521 | 521 | a) 50 mm dia (Heavy type) | item235 | 3 | EACH |
| 522 | 522 | b) 40 mm dia (Heavy type) | item236 | 3 | EACH |
| 523 | 523 | Supplying fitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes. | |||
| 524 | 524 | a) 50 mm dia (Heavy type) | item237 | 3 | EACH |
| 525 | 525 | b) 40 mm dia (Heavy type) | item238 | 3 | EACH |
| 526 | 526 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes | |||
| 527 | 527 | (a) Sintex make | |||
| 528 | 528 | 500 litre capacity | item239 | 1 | EACH |
| 529 | 529 | 2000 Lt capacity | item240 | 3 | EACH |
| 530 | 530 | INTERNAL ELETRICAL WORKS | |||
| 531 | 531 | Wiring in surface/ recessed ISI marked Steel conduit pipe FR.(Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) cable | |||
| 532 | 532 | Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia rigid ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) including 6 amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete. | |||
| 533 | 533 | Medium point up to 6.00 metre. Length. | item241 | 10 | EACH |
| 534 | 534 | Longpoint point up to 10.00 metre. Length. | item242 | 36 | EACH |
| 535 | 535 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. | |||
| 536 | 536 | Short point up to 3.00 metre. length. | item243 | 2 | EACH |
| 537 | 537 | Medium point up to 6.00 metre. Length. | item244 | 5 | EACH |
| 538 | 538 | Longpoint point up to 10.00 metre. Length. | item245 | 4 | EACH |
| 539 | 539 | Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed ISI marked Steel conduit pipe wiring system. | |||
| 540 | 540 | With 3 x 1.5 sq. mm. cable in 20 mm dia. rigid Steel conduit. | item246 | 170 | RM |
| 541 | 541 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts(Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed ISI marked Steel conduit pipe wiring system . | |||
| 542 | 542 | With 3 x 4 sq. mm. + earth continuity with 2x 2.5 sq. mm. cable in 25 mm. dia. rigid Steel conduit. | item247 | 170 | RM |
| 543 | 543 | Wiring in surface/ recessed PVC conduit FR (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) cable | |||
| 544 | 544 | Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete. | |||
| 545 | 545 | Short point upto 3.0 meter length | item248 | 6 | EACH |
| 546 | 546 | Medium point upto 6.0 meter length | item249 | 8 | EACH |
| 547 | 547 | Long point upto 10.0 meter length | item250 | 22 | EACH |
| 548 | 548 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. | |||
| 549 | 549 | Medium point upto 6.0 meter length | item251 | 3 | EACH |
| 550 | 550 | Long point upto 10.0 meter length | item252 | 9 | EACH |
| 551 | 551 | Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan. | item253 | 3 | EACH |
| 552 | 552 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) | |||
| 553 | 553 | Extra long point up to 15.00 metre. length. | item254 | 2 | EACH |
| 554 | 554 | Extra long point up to 20.00 metre. Length. | item255 | 2 | EACH |
| 555 | 555 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. | |||
| 556 | 556 | With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item256 | 230 | RM |
| 557 | 557 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item257 | 50 | RM |
| 558 | 558 | FITING AND ACCESSORIES | |||
| 559 | 559 | Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all accessories including 20 watts CFL lamp and connection as approved by the Deptt.)as required. | item258 | 4 | EACH |
| 560 | 560 | Supplying and fixing of 3 plate Ceiling Rose (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on the existing block including connection as approved by the Deptt.)complete as required | item259 | 4 | EACH |
| 561 | 561 | LUMINARIES | |||
| 562 | 562 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department. | |||
| 563 | 563 | Sleek Box type luminaries complete with Electronic ballast and plastic holder brackets/ top cover & decorative dual colour end caps with 1 X 36 / 40 watt Fluorescent tube.(Crompton Greaves make) Model- DJB 1314LDB50 / DJBN1314EB CROMTEK with Power Lux Lamp/ DMLUN36EB MIRRORLITE ULTRA SLIM with Super Saver Lamp or equivalent (Equivalent will be selected by the deptt considering the mother items rate) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make. [FL] | item260 | 42 | EACH |
| 564 | 564 | Striplite luminaries complete with VPIT copper ballast and 1 X 18 / 20 watt Fluorescent tube.(Crompton Greaves make) Model- DSG1112LDB CROMGOLD with Super Saver / Super Brite Lamp/ DSG1112LDB CROMGOLD with Power Lux Lamp or equivalent (Equivalent will be selected by the deptt considering the mother items rate) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make. | item261 | 9 | EACH |
| 565 | 565 | Supplying and fixing of batten holder including 11 W CFL lamp and connection as approved by the Deptt.)as required. | item262 | 20 | EACH |
| 566 | 566 | CEILING FAN, EXHAUST FAN AND AIR CURTAIN | |||
| 567 | 567 | Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. | |||
| 568 | 568 | Premium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make)\n | item263 | 6 | EACH |
| 569 | 569 | Trans Air 300 mm sweep Exhaust Fan (Crompton make) | item264 | 4 | EACH |
| 570 | 570 | MCB DB (ABB, SCHNEIDER MG, LEGRAND, HAGER MAKE) & (SCHNEIDER NEO BREAK, C&S, Havells, INDOASIAN, HPL OR EQUIVALENT MAKE AS PPROVED BY THE DEPTT.) | |||
| 571 | 571 | MCB IN-comer SPN DB | |||
| 572 | 572 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. | |||
| 573 | 573 | ABB, Schneider MG, legrand, Hager make) | |||
| 574 | 574 | 12 Way SPN Single Door | item265 | 1 | EACH |
| 575 | 575 | 6 way SPN single door | item266 | 3 | EACH |
| 576 | 576 | PART - 16 | |||
| 577 | 577 | MCB, MCCB, RCCB, RCBO (ABB, SCHNEIDER MG, LEGRAND, AND HAGER MAKE) & (SCHNEIDER NEO BREAK, C&S, Havells, INDO ASIAN, HPL OR EQUIVALENT MAKE AS PPROVED BY THE DEPTT.) MCB (Conform to IS / IEC 60898-1:200/ MCCB (Conform to IS/IEC 60947- RCCB (Conform to IS/IEC 12640 / 61008) | |||
| 578 | 578 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | |||
| 579 | 579 | B Series\n(Schneider MG, legrand, Hager make) | |||
| 580 | 580 | 6 to 32A | item267 | 28 | EACH |
| 581 | 581 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | |||
| 582 | 582 | B Series\n(ABB, Schneider MG, legrand, Hager make) | |||
| 583 | 583 | 40A | item268 | 1 | EACH |
| 584 | 584 | U. G. CABLE AND CABLE WORKS | |||
| 585 | 585 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured, extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . | |||
| 586 | 586 | Core - 3\nA2XY | |||
| 587 | 587 | 6 Sq.mm three core unarmoured cable | item269 | 170 | RM |
| 588 | 588 | Supply, installation & testing of G.I. earth station with perforated 50 mm dia and 3.00 Metre long heady duty G.I. pipe with necessary 50 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 65 mmx50 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item270 | 5 | EACH |
| 589 | 589 | Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | item271 | 5 | EACH |
| 590 | 590 | Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | item272 | 90 | RM |
| 591 | 591 | Suppying and fixing of electronic STEP Type Fan Regulator for ceiling fan complete with all connections in the existing switch board as required complete. | item273 | 6 | EACH |
AI Tender Summary
Tender Timeline
Aug 06, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 20, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender