Renovation Of Birsa Munda D . A . V Awasiya Vidalaya At Bundu Ranchi .
Tender Value
2.68 Crore
Estimated cost
Bid Submission
13 Aug 2019
0 days left
EMD
2.69 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Birsa Munda D . A . V Awasiya Vidalaya At Bundu Ranchi .
BOQ
| Name of Work:Renovation of Birsa Munda D.A.V Awasiya Vidalaya at Bundu Ranchi. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I. | 767.815 | cu.m | |
| 2 | 2 | Extra for earthwok in hard soil as per specification and direction of E/I. (Vide classification of soil item - B). | 245.683 | cu.m | |
| 3 | 3 | Providing designation 75B one brick edge soling joints fitted with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. | 188.242 | cu.m | |
| 4 | 4 | Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). | 107.28 | cu.m | |
| 5 | 5 | Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening maerials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. | 94.971 | cu.m | |
| 6 | 6 | Providing designation 75Bbrick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I. | 259.978 | cu.m | |
| 7 | 7 | Providing designation 125mm thick reinforced designation 75A brick work in (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement0 all complete as per building specification and direction of E/I. | 84.317 | SQ.MT | |
| 8 | 8 | Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and mixing cement sand of F.M 2.5 to 3 including screening, shuttering, vibrating, skirting, curing, taxes and royalty all complete all complete as per specification and direction of Engineer-incharge. | 74.334 | cu.m | |
| 9 | 9 | Providing P.C.C. M-100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade - III (50 mm to 25mm size) clean coarse sand of F.M 2.5 to 3 including screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, skirting, curing, taxes and royalty all complete all complete as per building specification and direction of Engineer-incharge. | 21.156 | cu.m | |
| 10 | 10 | Providing R.C.C. M-200 with nominal mix (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, skirting, curing (but excluding the cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/I. | 42.252 | cu.m | |
| 11 | 11 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in Band at Plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | 35.277 | cu.m | |
| 12 | 12 | providing R.C.C. M-200 with nominal mix of (1:1.5:3) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | 11.699 | cu.m | |
| 13 | 13 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | 3.13 | cu.m | |
| 14 | 14 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | 8.156 | cu.m | |
| 15 | 15 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in beam of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | 1.899 | Cu.m | |
| 16 | 16 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | 52.84 | cu.m | |
| 17 | 17 | Providing av. 63mm thick R.C.C. M-200 with nominal mix of (1:1.5:3) Chajja with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, striking 6mm cement plaster (1:4) in ceiling and sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. | 4.715 | sq.m | |
| 18 | 18 | Providing 25mm thick Damp Proof Course with cement concrete M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips of 20mm to 6mm size graded and clean course sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer with 5% cicio or any other approved water proffing compound and placing in position, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. | 3 | sqm | |
| 19 | 19 | Providing Precast R.C.C. M-150 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of F.M. 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. | 11.156 | cu.m | |
| 20 | 20 | Providing Precast R.C.C. M-200 with nominal mix of (1:1.5:3) slab of desired size with approved quality of stone chips and clean coarse sand of F.M. 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. | 4.479 | cu.m | |
| 21 | 21 | S/F 35mm thick solid core type non-decorative single leaf flush door and windows with black board core banded with high quality phenol formaldehydes synthetic resin both side commercial veneered of standard make with oxidized iron fittings such as hinges, sliding door bolts tower bolts, handles or rings hooks and eyes, cleats sand block as per schedule taxes and royalty all complete as per building and direction of E/I. | 2.277 | Sq.mt | |
| 22 | 22 | Supplying, fitting & fixing glass panes including supplying putty, beads and after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/I.\n4mm Plain\n | 25.2 | Sq.mt | |
| 23 | 23 | Providing Toe steel reinforcement of 8mm to 25mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL, TATA Steel, JSPL, Electro Steel Ltd. and Vizal Steel) | |||
| 24 | 23.01 | 8mm to 10mm (TMT coil Fe 500) (Only Valid for SAIL, TATA Steel, JSPL, Electro Steel Ltd. and Vizal Steel) | 6.149 | Mt | |
| 25 | 23.02 | 12mm to 25mm (TMT coil Fe 500) (Only Valid for SAIL, TATA Steel, JSPL, Electro Steel Ltd. and Vizal Steel) | 9.302 | Mt | |
| 26 | 24 | S/F M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofE/I. (Where materials is not supplied by the deptt.) | 3757.06 | Kg | |
| 27 | 25 | Providing and fixing fan hooks of 16mm dia M.S. bar & 1 meter long, bent torequired size and shape, placed in position and fixed in the R.C.C.slab/beam at the time ofcasting all complete as per building specification and direction of E/I. | 1 | Each | |
| 28 | 26 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. | 13.96 | Sq.mt | |
| 29 | 27 | Labour for fabrication, erecting, hoisting and fixing in position structural steel work in R.S. joist, shannel, Angel, Tee flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gussel plates, holding down bolts, anchor plates at all heights and depths, bolting, welding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I. | 1.69 | Mt | |
| 30 | 28 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I | 1074.23 | Sq.mt | |
| 31 | 29 | Labour for cutting old mosaic or precast terrazo tiles including cost of removing dirt, rubbing and ploishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. | 6613.12 | sq.m | |
| 32 | 30 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. | 1116.61 | sq.m | |
| 33 | 31 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. | 5618.35 | sq.m | |
| 34 | 32 | Providing 6mm thick cement plaster (1:4) in ceiling with clean of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. | 513.146 | sq.m | |
| 35 | 33 | Providing 1.5mm cement punning including curing, carraige of water with all leads and lifts as per building specification and direction of E/I. | 1116.61 | sq.m | |
| 36 | 34 | Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. | 8.592 | sqm | |
| 37 | 35 | Providing two coat of oil bound distemper of approved shade and make over a primer coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding, washing floors and taxes all complete as per building specification and direction of E/I. | 17808.7 | sq.m | |
| 38 | 36 | Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding curing and taxes all complete as per building specification and direction of E/I. | 2733.31 | Sq.mt | |
| 39 | 37 | Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales, smokes, grease and sand preparing, including cost of scaffolding and taxes all complete as per building specification and direction of E/I. | 1530.36 | sq.m | |
| 40 | 38 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specificatio). | 15.985 | sq.m | |
| 41 | 39 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I. | 844.098 | sq.m | |
| 42 | 40 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. | 36 | M3 | |
| 43 | 41 | Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. | 1.191 | Cu.m | |
| 44 | 42 | Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. | 180.608 | Sq.mt | |
| 45 | 43 | Dsimantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. | 3358.14 | Sq.mt | |
| 46 | 44 | Easing and adjusting door and window shutters with chaukhats in old work complete as per specification and direction of E/I. | 755 | Each | |
| 47 | 45 | Providing 250mm wide brick drain in cement mortar (1:6) with as. 150mm clear depth and 250mm apron including cost of earthwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. | 650 | Mtr. | |
| 48 | 46 | Water proofing for old and New Roof Slab : - Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied with brush, roller or spray for water proofing coating as per manufacturer specifications with following steps:- | |||
| 49 | 46.01 | Surface preparation :- Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint/coating and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika India Pvt. Ltd/MYK schomberg/Dr. Fixit/fosroc or equivalent. Proiding and reparing of all corners and joints such as those between the parapet wall and the roof slab etc. shall be chamfered with 150mm x 150mm fillet of mortar (Cement sna - 1:4) admixed with acrylic polymer of Sika/Fosroc/MYK Schomberg/Dr. Fixit or equivalent. | |||
| 50 | 46.02 | Before chamfering surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete. | |||
| 51 | 46.03 | 1st coat :- Apply 1st coat of two component acrylic modified, ready to use, flexible cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600mm by brush or roller. After 1st coat of application, 45 gsm of fibre glass cloth to lay when the first layer is still green, 1st coat should be applied @ 1.50 kg/sqm/coat. For the purpose of measurement the entire treated surface will be measured. | |||
| 52 | 46.04 | 2nd Coat :- To apply the 2nd coat of two component acrylic modified, ready to use, flexible cementitious material right angle to the 1st coat over the glass fibre laid surface. 2nd coat should be applied @ 0.7 kg/Sqmt/coat. For the purpose of measurement the entire treated surface will be measured. After three days of drying the 2nd coat, the rain water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be doen as per satisfaction of E/C. The waterproof coating to be protected from damage before screed over it. Water proofing coating to be protected from damage before screed over it. Water proofing Brand-Sika Topseal 109hi/Fosroc Brushbond RFX/Dr Fixit Pidifin 2K/MYK Auafin TG, Product Performance - chemical | |||
| 53 | 46.05 | Base part A : Acrylic copolymer, Part B : Specially graded cementtitious powder - Density 1.6 kg/l (mixed density) at +270C Tensile strength ~ 2N/mm2 after 28 days (with Fibre cloth) (according to ASTM D 2370) Pullout Bond Strength ~ 2 N/mm2 (concrete failure) (According to ISO 4624) Slant-shear bond strength~4 N/mm2 (According to FIP 5.15) Elongation at Break ~ 35% without Fibre Cloth and 20% with fibre cloth (According to ASTM D 2370) | |||
| 54 | 46.06 | Protection of treatedsurface with PCC : - The treated surface should be covered with 25mm/50mm PCC of M-20 grade (1:1.:3) with proper slope (1:120) towards the rain outlets in alternatepanels of 2 Mt x 2mt keeping 6mm gap between the panel joint intergal water proofing admixture conforming to IS 2645 @ of 100 ml per bag of cement to be added in the acreed concrete (paid separately for this items) all corners shall be chamfered with 150mm x 150mm fillet. The rainwater outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - the peripheral gaps between PVC pipe outlet and concerte surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insentive epoxy putty of Sika India pvt Ltd/MYK Schomberg/Dr. Fixit/Fosroc. For the purpose of measurement the entire treated surface will be measured.\" | |||
| 55 | 46.07 | Groove of PCC surface should be filled with Polysulphide Sealant. (Paid Separately) Brand - Sika India Pvt. Ltd./MYK Schomberg/Dr. Fixit/Fosroc. Warantly for five years. | 3408.32 | Sq.mt | |
| 56 | 47 | Covering of treated surface with PCC : Providing 25mm thick cement concrete M-20 (1:1.5:3) maintaining slope in alternate 2mt x 2 mt panels with approved quality of stone chips of 20mm to 6mm size graded and cleaned sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer with admixture of integral water proffing and placing in position, skirting curing, taxes and royalty all complete as per building specification and direction of E/I. Panels that has been left should be casted next day. there should be 6mm gap between Panels Brand-Sika-Plastocrate plus, MYK proof WP 10, Fosroc-Conplast X421 ic Dr. Fixit Pidiproof LW+ | 3408.32 | Sq.mt | |
| 57 | 48 | Providing and filling of 6mm thick Groove between 25mm PCC Panels with Polysulphide Sealant (Poring Grade) as per drawings and technical specifications and direction of E/I. (with 18% GST) Brand - Sika-Polysulphide, Forsoc-thioflex 600, Dr. Fixit Pidiseal PS (42P, MYK Seal PS or Equivalent. | 3408.32 | Mtr. | |
| 58 | 49 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.\nOrdinary rock | 151.634 | Cu.m | |
| 59 | 50 | Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold ofmild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressedmild steel welded or rigidly fixed together by mechanical means, includingM.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplateand shock absorbers as specified and applying a coat of approved steelprimer after pre-treatment of the surface as directed by Engineerin-charge:\nProfile B- Fixing with adjustable lugs with split end tail to each jamb | 5.335 | Mtr. | |
| 60 | 51 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.\nIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 520.446 | kg. | |
| 61 | 52 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :\n25 mm thick | 4.833 | sq.m | |
| 62 | 53 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3\ncoarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | 1.673 | sq.m | |
| 63 | 54 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved\nmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps\nand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 242.702 | sq.m | |
| 64 | 55 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :\n4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | 85.208 | sq.m | |
| 65 | 56 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. | |||
| 66 | 56.01 | 75 mm | 195 | Mtr. | |
| 67 | 56.02 | 110 mm | 384.024 | Mtr. | |
| 68 | 57 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. | |||
| 69 | 57.01 | Coupler - 110mm | 20 | Each | |
| 70 | 57.02 | Single tee with door - 75x75x75 mm | 42 | Each | |
| 71 | 57.03 | Single tee with door - 110x110x110 mm | 42 | Each | |
| 72 | 57.04 | Single tee without door - 75x75x75 mm | 62 | Each | |
| 73 | 57.05 | Single tee without door - 110x110x110 mm | 69 | Each | |
| 74 | 57.06 | 75 mm bend | 46 | Each | |
| 75 | 57.07 | 110 mm bend | 81 | Each | |
| 76 | 57.08 | Shoe - 110 | 35 | Each | |
| 77 | 58 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete\n110 mm | 170 | Each | |
| 78 | 59 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 84.52 | sq.m | |
| 79 | 60 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | 32.621 | sq.m | |
| 80 | 61 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:\nNew work (Two or more coats applied @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) | 3515.86 | sq.m | |
| 81 | 62 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer\napplied @ 2.20 kg/ 10 sqm) | 4672.06 | sq.m | |
| 82 | 63 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. | 25964 | sq.m | |
| 83 | 64 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 24647.5 | sq.m | |
| 84 | 65 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm\nthick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | 573.121 | sqm | |
| 85 | 66 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | |||
| 86 | 66.01 | For fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron) | 3.628 | kg. | |
| 87 | 66.02 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) - Powder coated aluminium (minimum thickness\nof powder coating 50 micron) | 3.689 | kg. | |
| 88 | 67 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):\nWith float glass panes of 4.0 mm thickness | 1.004 | sqm | |
| 89 | 68 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge | |||
| 90 | 68.01 | 50 mm avrage thickness | 16.451 | sqm | |
| 91 | 68.02 | 25 mm avrage thickness | 50.83 | sqm | |
| 92 | 69 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. | 61.588 | Mtr. | |
| 93 | 70 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.\nUpto and including 12mm dia. | 130 | Each | |
| 94 | 71 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.\nSBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2 kg cement per sqm of surface area mixed with specified proportion of approved\npolymer | 67.282 | sqm | |
| 95 | 72 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.\nNote: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/ mm2).\n25 mm average thickness in 2 layers. | 50.83 | sqm | |
| 96 | 73 | Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness.\n50mm thick in Grade M 25 with cement content not less than 330 kg per cum | 18.386 | sqm | |
| 97 | 74 | Carriage of materials | |||
| 98 | 74.01 | Bricks | 190512 | Thou. | |
| 99 | 74.02 | Sand | 304.325 | cum | |
| 100 | 74.03 | Stone chips | 217.992 | cum | |
| 101 | 74.04 | Stone metal | 26.562 | Cum | |
| 102 | 74.05 | Local Sand | 106.186 | cum | |
| 103 | 75 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all compere as per specification and direction of E/I. | 126 | Each | |
| 104 | 76 | Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I. | |||
| 105 | 76.01 | Horizontal - 25 mm dia | 13 | Each | |
| 106 | 76.02 | Horizontal - 32mm dia | 13 | Each | |
| 107 | 77 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. | |||
| 108 | 77.01 | Mirrors of 6mm thick glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror - (300 x 450mm) | 56 | Each | |
| 109 | 77.02 | C.P. brass dish container medium quality with screw and hinges etc. | 52 | Each | |
| 110 | 78 | Supplying, fitting and fixing viterious white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair or viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.\n510mm long - With 12.5 lit. low level PVC cistern | 66 | Each | |
| 111 | 79 | Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I.handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I.\nE.W.C. with 'S'trap - 12.5 lit low level PVC Cistern | 14 | Each | |
| 112 | 80 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware urinal of 'Hindustan \"Parry\" or any other approved I.S.S. make with 5 liters capacity C.I. automatic flushing cistern of reliance for any other I.S.S. approved make with all fittings with C.I. or R.S., brackets, standard size G.I. flush pipe with fitting clamps, 15mm, C.I. body brass spindle stop cock of approved quality weight not less than 400 grams, 15mm P.V.C./Alkthene pipe 450mm long with brass coupling at both ends and doing plumber joints including painting coat of red oxide cutting wall and floor making good the same etc. all complete as per specification and direction of E/I.\nFlat back or Standing Cornar | 28 | Each | |
| 113 | 81 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms. 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. | 58 | Each | |
| 114 | 82 | Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of exacavted earth within initial lead and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I. | 51.3 | Cu.m | |
| 115 | 83 | Labour for laying, fitting and fixing NP2 R.C.C. spun pipe with collars in lines, level and grade providing approved jointing materials and joints properly fillrs to make them lead proof including providing sight rails, bonning rod, night, guard, Red light and barrier etc. all complete as per specification and direction of E.I.\n150mm dia R.C.C. spun pipe | 310 | Mtr. | |
| 116 | 84 | Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. | 22 | Each | |
| 117 | 85 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.\nInternal work - Exposed on wall | |||
| 118 | 85.01 | 25 mm nominal outer dia Pipes | 123 | Mtr. | |
| 119 | 85.02 | 32 mm nominal outer dia Pipes | 180 | Mtr. | |
| 120 | 86 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.\nConcealed work, including cutting chases and making good the walls etc. | |||
| 121 | 86.01 | 15 mm nominal outer dia Pipes | 298 | Mtr. | |
| 122 | 86.02 | 20 mm nominal outer dia Pipes | 278 | Mtr. | |
| 123 | 87 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.\nWith common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 | 2 | Each | |
| 124 | 88 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 8000 | Ltr. | |
| 125 | 89 | Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I.\n150mm dia | 310 | Mtr. | |
| 126 | 90 | Approved basic rates construction materials for preparation of schedule of rates only, (Material should conform to relevent B.I.S. specification). The rates are inclusive of all taxes, royalty, cess and carraige but exclusive of contractor's profit and overhead charges -\nSpecial type of C.P. Bath room fitting for V.I.P. buildings (JAL, Jaguar, Marc or equivalent mark) | |||
| 127 | 90.01 | Angular Stopcock /2 way bib cock | 14 | Each | |
| 128 | 90.02 | Telephonic shower flexible pipe/ health Fasat | 14 | Each | |
| 129 | 91 | Point wiring in PVC conduit, with modular type switch - \nPoint wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required.\nGroup C | 1071 | nos | |
| 130 | 92 | Power Plug Wiring in PVC conduit(2x4 sq. mm): Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit alongwith 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. | 680 | Mtr. | |
| 131 | 93 | Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. | |||
| 132 | 93.01 | 2x1.5 Sqmm + 1x1.5 sqmm earth wire | 750 | Mtrs. | |
| 133 | 93.02 | 2x2.5 Sqmm + 1x2.5 sqmm earth wire | 2120 | Mtrs. | |
| 134 | 93.03 | 4 x 6.0 sq.mm. +2 x 6.0 sq.mm. earth wire | 250 | Mtrs. | |
| 135 | 93.04 | 4x6 Sqmm + 2x6 sqmm earth wire | 180 | Mtrs. | |
| 136 | 94 | S/F Modular type switch socket - \nSupplying and fixing following modular type switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required | |||
| 137 | 94.01 | 5/6 amps, one way switch | 963 | Each | |
| 138 | 94.02 | 3 pin 5/6 amps, socket outlet | 204 | Each | |
| 139 | 95 | S/F Modular type electronic fan regulator -\nSupplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | 270 | Each | |
| 140 | 96 | S/F Light plug Point with Modular type accessories: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc as required. | 38 | Each | |
| 141 | 97 | S/F power plug point with Modular type accessories - \nSupplying and fixing suitable size G.I. box with modular plate cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required. | 30 | Each | |
| 142 | 98 | S/F Ceiling Rose: Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooen block including connection etc as required. Make :- Anchor / Kona / Kany | 364 | Each | |
| 143 | 99 | S/F Batten / Angle Holder: Supplying and fixing batten / angle holder including connection etc as required. | 443 | Each | |
| 144 | 100 | S/F T.P. MCB DB - \nSupplying and fixing following way, three pole and netural, sheet MCB ditribution board, 415 volts, on surface/recess, complete with tinned copper busbar, netural busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | |||
| 145 | 100.01 | 4 way (4 + 12), Double door, Horizontal type | 16 | Each | |
| 146 | 100.02 | 6 way (4 + 18), Double door, Horizontal type | 2 | Each | |
| 147 | 101 | S/F 'B' series SP MCB: Supplying and fixing 240 volts, 'B' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make :- Havells / Indoasian / Standard.\n6/32A Single Pole | 168 | Each | |
| 148 | 102 | S/F DP MCB Isolator - \nSupplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.\n40 amps | 5 | Each | |
| 149 | 103 | S/F four pole MCB isolator - \nSupplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioining etc. as required.\n40 amps | 2 | Each | |
| 150 | 104 | G.I. Earth electrode with salt/charcoal - \nEarthing with G.I. earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required | 6 | Set | |
| 151 | 105 | Copper earth plate elecrtode - \nEarthing with copper earth plate 600mmx 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required (But without charcoal or coke and salt) | 4 | Set | |
| 152 | 106 | Salt/ charcoal for Pipe Earth Electrode: Extra for using salt and charcoal for pipe earth electrode as required. | 4 | set | |
| 153 | 107 | S/L 8 SWG copper wire:- Supply and fixing 8 SWG cpper wire at 0.50 metere below ground level for coductor earth electrode including soldering etc. as required. | 135 | Mtrs. | |
| 154 | 108 | Providing and Fixing Copper Lightning Conductor Finial : P/F of lighting conductor finial, made of 25mm dia 300mm long copper tube, having single prong at top, with 85mm dia 3mm thick copper base plate including holes etc. complete as required. | 8 | nos | |
| 155 | 109 | Reverting, sweating and soldering lightning conductor tape - \nReverting, sweating and soldering of copper/G.I. tape (with another copper/G.I. base of the final or any other metalic object) as required. | 16 | Each | |
| 156 | 110 | Copper Tape:- Supply and fixing cpper tape 20mmX3mm thick on parapet or surface of wall for lighting conductor coductor complete etc. as required(vertical run). | 80 | Mtrs. | |
| 157 | 111 | Copper Tape:- Supply and fixing cpper tape 20mmX3mm thick on parapet or surface of wall for lighting conductor coductor complete etc. as required(Horizontal run). | 174 | Mtrs. | |
| 158 | 112 | Providing and Fixing Testing Joint 20mm x 3 mm copper Strip : Providing & fixing of 20mmX3mm copper Strip, 125mm long with 4 nos of tinned brass bolts, nuts, check nuts and spring washers etc as required. | 8 | each | |
| 159 | 113 | MV cable laying upto 25 sq.mm. in ground - \nLaying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm. direct in ground including excavation, sand cushioning, protective covering and refilling the trecnch aetc. as required. | 55 | Mtrs. | |
| 160 | 114 | MV Cable Laying upto 120 Sq mm in same trench:- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size exceeding 25 Sq mm but not exceeding 120 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc, as required. | 60 | Mtrs. | |
| 161 | 115 | Providing and fixing of XLPE insulated, aluminium armoured cable including termination. Make:- Havells / Finolex / Polycab \n95 sq.mm ,3.5 core 1.1kV | 90 | Mtr. | |
| 162 | 116 | Supplying and fixing following powder coated batten for 28 watt T5 flourescent tube complete with electronics ballast and lamp etc. directly on wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as required.(Single) | 260 | Each | |
| 163 | 117 | Supply of Ceiling Fan 1200mm(48\") | 240 | Each | |
| 164 | 118 | Supply of Metal Exhaust Fan 300mm (12\") | 69 | Each | |
| 165 | 119 | S/F LED Bulb : Supplying and fixing of 9/10 W LED lamp in existing holder. Make:- BAJAJ/ Philips /Hevalls | 373 | Each | |
| 166 | 120 | S/F LED Bulb : Supplying and fixing of 45/48 W LED Street light | 8 | Each | |
| 167 | 121 | Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. | |||
| 168 | 121.01 | (a) From 0.00 M to 50.00 M below G.L. | 100 | Mtr. | |
| 169 | 121.02 | (b) From 51.0 M to125.00 M | 150 | Mtr. | |
| 170 | 121.03 | (c) From126.0 M to150.00 M | 50 | Mtr. | |
| 171 | 122 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.\n200 mm nominal size dia | 50 | Mtr. | |
| 172 | 123 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge\n100 mm nominal size dia | 60 | Mtr. | |
| 173 | 124 | Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge | 6.676 | Cu.m | |
| 174 | 125 | Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge | 6.676 | Cu.m | |
| 175 | 126 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge | 6.676 | Cu.m | |
| 176 | 127 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \"V\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge | 4 | Hours | |
| 177 | 128 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:\n200 mm dia | 4 | Each | |
| 178 | 129 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.\n200 mm clamp | 4 | Each | |
| 179 | 130 | Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.\nSubmersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages\n2 HP | 2 | Each | |
| 180 | 131 | Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I. | 260 | Mtr. | |
| 181 | 132 | Supply fitting and fixing lowering 50 mm dia G.L. collumn pipe all complete job as per direction of E/I. | 230 | Mtr. | |
| 182 | 133 | Drilling in all kinds of soil and rock in rural area for installation of IM-III HP with DTH Rig including supplying all materials, labours, tools. Drilling rig, air compressor and euipment as well as fuel. Lunricants for making 125mm/115mm dia broing and cost of transporting charge of rig machined and other supporting vechicles upto work site as per direction of E/I.\nDrilling up to 30m | 60 | Mtr. | |
| 183 | 134 | Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m) | 472.25 | cum | |
| 184 | 135 | a) Planting Permanent Hedges including Digging of Trenches (Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart)\nHedges Along paved area and Lawn Sides | 250 | Mtr. | |
| 185 | 136 | Direction and place identification signs upto 0.9 sqm size board (Providing and erecting direction and place indentification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 2mm thick with area not exceeding 0.9 sqm supported on a mild single angle iron post 75 x 75 x 6mm firmly fixed to the ground bymeans of proerly designed forundation with M-15 grade cement concrete 45 x 45 x 60cm, 60cm below ground level as per approved drawing) | 3 | Mtr. | |
| 186 | 137 | Direction and place indetification signs with size more than 0.9 sqm board (Providing and erecting direction and place identification retro-reflectorised sign as per IRC: 67 made of 2mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos. firmly to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm below ground level as per approved drawing) | 3 | Sqm | |
| 187 | 138 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including\nremoval of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :\nHoles 60 cm dia, and 60 cm deep | 330 | cum | |
| 188 | 139 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment). | 5.94 | cum | |
| 189 | 140 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding\ncast of plant & water) | |||
| 190 | 140.01 | Trees Plant | 30 | Each | |
| 191 | 140.02 | Shrub Plants | 280 | Each | |
| 192 | 141 | Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green\nfoliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. | 60 | Each | |
| 193 | 142 | Providing and displaying of Schefflera high colour plant (three in one), having ht. 23 cm to 30 cm, well developed with fresh and healthy foliage in 25 cm\nsize of Earthen pot / Plastic pot & as per direction of the officer-in-charge. | 20 | Each | |
| 194 | 143 | Providing and Displaying plants Allyssum white in full bloom well developed Fresh & healthy Plant in 20 cm Earthen Pot/Plastic Pot and as per direction\nof the officer-in-charge. | 20 | Each | |
| 195 | 144 | Providing and Displaying plants Petunia hybrid different variety in different colour well developed with fresh and healthy foliage in full bloom in 25 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge. | 20 | Each | |
| 196 | 145 | Providing and Displaying plants Dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with Green painted Bamboo sticks, 45 to 60 cm height in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. | 20 | Each | |
| 197 | 146 | Providing and Displaying plants Dianthus dwarf in different colour fresh & healthy bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the\nofficer-in-charge. | 20 | Each | |
| 198 | 147 | Providing and Displaying plants Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. | 20 | Each | |
| 199 | 148 | Providing and Displaying plants Missbranthemum in different colour well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/\nPlastic Pot and as per direction of the officer-in-charge. | 20 | Each | |
| 200 | 149 | Providing and Displaying plants Nasturtium in different colour well developed with fresh & healthy foliage with full bloom in 20 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge.. | 20 | Each | |
| 201 | 150 | Providing and Displaying plants Verbina in different colour having 30 to 45 cm ht., well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. | 20 | Each | |
| 202 | 151 | Supply and stacking of Polyalthia longifolia (Ashok) plant of height 180- 195 cm. in gunny bag of size 30 cm as per direction of the officer-incharge. | 20 | Each | |
| 203 | 152 | Supply and stacking of Bottle palm plant of ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags as per direction of the officer-in-charge. | 10 | Each | |
| 204 | 153 | Supply and stacking of Delonix regia (Gulmohar) plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge | 10 | Each | |
| 205 | 154 | Supply and stacking of Schleichera trijuga (Kusum) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. | 10 | Each | |
| 206 | 155 | Supply and stacking of Grevillea robusta (Silver Oak) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-incharge. | 10 | Each | |
| 207 | 156 | Supply and stacking of plant Cassia biflora of height 60-75 cm. with 4-5 branches in poly bags of size 25 cm as per direction of the officer-in-charge. | 20 | Each | |
| 208 | 157 | Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. | 20 | Each | |
| 209 | 157.01 | Non Schedule | |||
| 210 | 158 | S/F ITC of main cubical panel mode of 14 SWG CRCA sheet steel double door type powder coated having IP 54 suitable for operation as 415 volts 3 phase 50 HZ 200 amp copper bus bar on load change over-200 amp 4 pole, inter connection wires, along with analog volt ammeter selector switch CT, indicating liamps etc. as required make seimens, L & T, ABB with thermo magnetic release and front rotary handle, etc. complete. | |||
| 211 | 158.01 | Incoming\n250 AMP/35 KA FP MCCB - 1 No. 300 Amp Busbar Chamber -1 no 60 Amp On-Off load Change over -1 no\nOutgoing\n63 amp/16 KA FP MCCB - 2 No. 40A 10 KA TP MCCB - 8 No 32 Amp DP-4 | 1 | Set | |
| 212 | 159 | Supplying, installation, testing and commissioning of cubical type MV Panel made out of 14 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 75mmx75mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switchgears. (Main LT panel) | |||
| 213 | 159.01 | INCOMER:- 160 Amp,35 KAmanual,fixed,MCCB (1 Nos. ) 1 Set phase indication lights (R, Y, B) 1 No. Volt Meter (digital type) with inbuilt VSS & control fuses. 1 No.Ammeter (digital type) with inbuilt ASS \nAL. BUSBAR CHAMBER:- 200 Amps. TP&N Aluminium bus bars (35 KA)\nOUT GOINGS:- 4 pole MCCB 63 A,10 kA with fixed thermal magnetic setting.(1 Nos. ) 4 pole MCCB 40 A,10kA with fixed thermal magnetic setting.(2 Nos. ) 40 A,DP (2 Nos. ) | 1 | SET | |
| 214 | 160 | Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes ,royalty etc all complete job as per direction of E/I. | 2 | Each | |
| 215 | 161 | Providing Fitting & Fixing Precast RCC Benches as per direction of E/I . | 15 | Each | |
| 216 | 162 | Add 12 % GST | BI01010001010000000000000515BI0100001309 | 1 | L.S. |
| 217 | 163 | Add 1% Labour Cess | BI01010001010000000000000515BI0100001310 | 1 | percentage |
AI Tender Summary
Tender Timeline
Aug 05, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 14, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender