Construction Of Mcc Building At Kotdwar
Tender Value
27.29 Lakhs
Estimated cost
Bid Submission
17 Aug 2019
0 days left
EMD
55000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kotdwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Mcc Building At Kotdwar
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | Civil Items : | |||
| 2 | 1.01 | Excavation in all kinds of soil by mechanical means/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plain) including disposal of excaveted earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neately dressed. All kinds of soil. | item1 | 66.24 | Cum. |
| 3 | 1.02 | Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | item2 | 66.24 | Cum. |
| 4 | 1.03 | Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete. | item3 | 160.36 | Cum. |
| 5 | 1.04 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | item4 | 25.94 | Cum. |
| 6 | 1.05 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | item5 | 9.35 | Cum. |
| 7 | 1.06 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | item6 | 20.86 | Cum. |
| 8 | 1.07 | Centring and shuttering including strutting,ropping etc. and removal of form for Centring and shuttering including strutting,ropping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete. | item7 | 350.02 | Sqm. |
| 9 | 1.08 | Reinforcement for R.C.C. work including Straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. | item8 | 4375.94 | Kg. |
| 10 | 1.09 | Brick Work Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) | item9 | 35.72 | Cum. |
| 11 | 1.1 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) | item10 | 60.9 | Cum. |
| 12 | 1.11 | 12 mm cement plaster of mix\n 1:6 (1 cement : 6 fine sand) | item11 | 292 | Sqm. |
| 13 | 1.12 | 15 mm cement plaster on rough side of single or half brick wall of mix\n1: 6 (1 cement: 6 fine sand) | item12 | 324.16 | Sqm. |
| 14 | 1.13 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm nominal size stone aggregate. | item13 | 131.37 | Sqm. |
| 15 | 1.14 | Providing and fixing glass strips in joints of terrazo/ cement metre concrete floors. 40 mm wide and 4 mm thick. | item14 | 176.64 | Rmt. |
| 16 | 1.15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer | item15 | 324.16 | Sqm. |
| 17 | 1.16 | Finishing walls with Premium Acrylic Smooth Exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). | item16 | 292 | Sqm. |
| 18 | 1.17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. | item17 | 172 | Sqm |
| 19 | 1.18 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement:2 coarse sand :4 graded stone aggregate 40 mm nominal size). | item18 | 3.95 | Cum. |
| 20 | 1.19 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufacturedfrom high tensile steel wire of adequate strength conforming to IS: 4454 -part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover | item19 | 36 | m2 |
| 21 | 1.2 | providind & fixingBall bearing for Rolling shutter including all material ,T&P etc complete. | item20 | 8 | NO |
| 22 | 1.21 | Forming groove of uniform size from 12*12 mm and upto 25*1 plasterd surface as per approved pattern using wooden battens | item21 | 606 | Rmt. |
| 23 | 1.22 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | item22 | 2048 | Kg. |
| 24 | 1.23 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | item23 | 2186 | Kg. |
| 25 | 1.24 | Supply & installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT) thick Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | item24 | 247 | SQM |
| 26 | 1.25 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | item25 | 31 | Rmt. |
| 27 | 1.26 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter .(600 mm over all girth) metre 815.00 | item26 | 41 | Rmt. |
| 28 | 1.27 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) | item27 | 100 | SQM |
| 29 | 1.28 | In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)Acid and alkali resistant tile | item28 | 3.2 | SQM |
| 30 | 1.29 | P/L C.I. TILES IN FLOORING | item29 | 60 | SQM |
| 31 | 1.3 | WGPVCMOD point wiring in pvc conduit with modular type switch wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm fr pvc insulated coper conducter single core cable in surface/recessed pvc conduit with modular switch modular plate suitable gi box and earthing the point with 1.5sqmm fr pvc insulated coper conducter single core cable etc. as required. Groupe A | item30 | 16 | Point |
| 32 | 1.32 | WGPVCPP2 power plug wirinig in pvc conduit(2*4 sq.mm wirining for light/power plug with 2*4 sq.mm fr pvc insulated copper conducter single core cable in surface/recessed pvc conduit alongwith 1 no 4 sq mm fr pvc insulated copper conducter single core cable for loop bearthing as required | item32 | 50 | metre |
| 33 | 1.33 | WGPVCSB Circuit/sub man wiring in pvc coduit wiring for circuit/sub man wiring alongwith earth wire with the following sizes of pvc insulated copper conduter single core cable in surface/reessed pvc conduit as required.2*4 sqmm +1*4 sqmm earth wire. | item33 | 60 | metre |
| 34 | 1.35 | S& F McB metal boxes of following sizes (nominal sizes) on surface or in recsses with suitable size of phenolic laminated sheet cover in front including painting etc.required. 100mm*100mm*60mm deep | item35 | 6 | each |
AI Tender Summary
Tender Timeline
Aug 03, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 19, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender