| 1 | 1 | Earth work in excavation in foundations, trenches etc. in all kinds of soil, not exceeding 2 meters depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry in 15 cm layers with compaction, including disposal of all surplus soil as directed within a lead of 30 Mtrs. (HSR 6.6) | BI01010001010000000000000515BI0100001113 | 9.26 | P.Cum (Per Cubic Metre) |
| 2 | 2 | Cement concrete 1:8:16 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.28) | BI01010001010000000000000515BI0100001114 | 4.47 | P.Cum (Per Cubic Metre) |
| 3 | 3 | Cement concrete 1:1½:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respect. [HSR. 10.82 + 10.95 (a)]. | BI01010001010000000000000515BI0100001115 | 3.15 | P.Cum (Per Cubic Metre) |
| 4 | 4 | Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded. (HSR 10.114) | BI01010001010000000000000515BI0100001116 | 4.49 | P.Sqm (Per Square Metre) |
| 5 | 5 | First class brick work laid in cement sand mortar 1:6 in foundation plinth. (HSR 11.2) | BI01010001010000000000000515BI0100001117 | 25.38 | P.Cum (Per Cubic Metre) |
| 6 | 6 | Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. (HSR 14.1) | BI01010001010000000000000515BI0100001118 | 136.67 | P.Sqm (Per Square Metre) |
| 7 | 7 | Conglomerate floor 50 mm thick cement concrete topping 1:2:4. (HSR 14.10) | BI01010001010000000000000515BI0100001119 | 136.67 | P.Sqm (Per Square Metre) |
| 8 | 8 | Precast chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings. (HSR 14.45) + Note | BI01010001010000000000000515BI0100001120 | 235.87 | P.Sqm (Per Square Metre) |
| 9 | 9 | Providing & fixing ceramic tiles/anti skid tiles of size 400mm x 400mm or above size of approved make in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Not : Tile shall be of premium quality (first quality) of reputed manufacturer like:- RAK, NITCO, KAJARIA, SOMANI, JOHNSONS, ORIENTBELL, SIMPOLO shall be used as approved by Engineer-in-charge. (HSR 14.91). Note:- The Agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. | BI01010001010000000000000515BI0100001121 | 4.81 | P.Sqm (Per Square Metre) |
| 10 | 10 | Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (a) Size of ceramic Glazed tiles 200 x 300 mm of reputed manufacturer like:- RAK, NITCO, KAJARIA, SOMANI, JOHNSONS, ORIENTBELL, SIMPOLO shall be used as approved by Engineer-in-charge. (HSR 14.92(a)). Note:- The Agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. | BI01010001010000000000000515BI0100001122 | 32.84 | P.Sqm (Per Square Metre) |
| 11 | 11 | Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (b) Size of ceramic Glazed tiles 300 x 450 mm of reputed manufacturer like:- RAK, NITCO, KAJARIA, SOMANI, JOHNSONS, ORIENTBELL, SIMPOLO shall be used as approved by Engineer-in-charge. (HSR 14.92(b)). Note:- The Agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. | BI01010001010000000000000515BI0100001123 | 18.22 | P.Sqm (Per Square Metre) |
| 12 | 12 | 12 mm Thick Cement Plaster 1:4 on the rough side of single or half brick wall. (HSR 15.5). | BI01010001010000000000000515BI0100001124 | 126.39 | P.Sqm (Per Square Metre) |
| 13 | 13 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. Painting on wooden surfaces etc. (HSR 16.1) | BI01010001010000000000000515BI0100001125 | 135.24 | P.Sqm (Per Square Metre) |
| 14 | 14 | Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. (Note:- First quality paint/primer of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.2). | BI01010001010000000000000515BI0100001126 | 135.24 | P.Sqm (Per Square Metre) |
| 15 | 15 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.3). | BI01010001010000000000000515BI0100001127 | 135.24 | P.Sqm (Per Square Metre) |
| 16 | 16 | Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mittii including finishing Preparation of plastered surfaces for oil bound distemper including sand papering (HSR 16.52) | BI01010001010000000000000515BI0100001128 | 126.39 | P.Sqm (Per Square Metre) |
| 17 | 17 | Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.60) | BI01010001010000000000000515BI0100001129 | 126.39 | P.Sqm (Per Square Metre) |
| 18 | 18 | Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note:- reputed make Putty such as J.K./ Birla shall be used as approved by Engineer-in-charge). (HSR 16.81). | BI01010001010000000000000515BI0100001130 | 126.39 | P.Sqm (Per Square Metre) |
| 19 | 19 | Providing and fixing plywood, plain lining butt-jointed, including wooden plugs (Teak, placed at 45 cm to 60 cm centres, complete with necessary nails (Frame work shall be payable extra)- (HSR 17.47) (b) 6 mm thick 3 ply decorative ply wood with teak faced on one side | BI01010001010000000000000515BI0100001131 | 5.94 | P.Sqm (Per Square Metre) |
| 20 | 20 | Providing and fixing commercial type block Board, plain lining, butt jointed, including Wooden plugs (teak) placed at 45 cm to 60 cm centres, complete with necessary nails (frame work shall be payable extra)- (HSR 17.49) (b) 19 mm thick | BI01010001010000000000000515BI0100001132 | 86.95 | P.Sqm (Per Square Metre) |
| 21 | 21 | Providing and fixing flat pressed singled Or 3 layers particle board of B.W.R. grade (medium density) in plain lining butt jointed, including wooden plugs (Teak), placed at 45 cm to 60 cm centres, complete with necessary nails (frame work shall be payable extra)- (HSR 17.48) (b) 19 mm thick | BI01010001010000000000000515BI0100001133 | 107 | P.Sqm (Per Square Metre) |
| 22 | 22 | Factory manufactured paneled and glazed door shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc., c(non –coniferous timber other than team, conforming to I.S specification no. 1003 kiln seasoned), with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 12 mm thick commercial veneered both sides particle board or plywood of B.W. R. grade, hot-pressed, including cost of iron hinges, screws, chocks/cleats, stops and nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above but including labour for fixing the same in position:- (HSR 17.91) (c) 40mm thick | BI01010001010000000000000515BI0100001134 | 2.23 | P.Sqm (Per Square Metre) |
| 23 | 23 | Factory-manufactured wire gauze door and windows shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash, etc, (non coniferous timber other teak, conforming to I.S. specification no. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fitting other than specified above, but including labour for fixing the same in position)- (styles and rails of windows shutter shall be 75 mm wide). (HSR 17.92) (ii) 35 mm thick | BI01010001010000000000000515BI0100001135 | 15.58 | P.Sqm (Per Square Metre) |
| 24 | 24 | Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in position including iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- (HSR 17.93) (a) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges:- (HSR 17.93) (a) (iii) 35 mm thick | BI01010001010000000000000515BI0100001136 | 10.04 | P.Sqm (Per Square Metre) |
| 25 | 25 | Supplying and fixing glass panes including special metal sash putty of approved make. (HSR 18.30) (b) glass panes 4 mm thick, exceeding 40 sq dm areas. | BI01010001010000000000000515BI0100001137 | 13.28 | P.Sqm (Per Square Metre) |
| 26 | 26 | Pressed steel sheet frames (chowkhats) consisting of 2mm thick steel sheet of the specified section, including iron lugs (hold fasts) iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete. [HSR 18.34]. (a) door and window frame of size 89 mm X 50 mm with 40 mm wide single rebate | BI01010001010000000000000515BI0100001138 | 15.85 | P.Rmtr. (Per Running Metre) |
| 27 | 27 | Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (b) Double trap syphonic (ii) Single Color. [HSR 30.5 (b) (ii)]. | BI01010001010000000000000515BI0100001139 | 1 | Each |
| 28 | 28 | EXTRA OVER item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY C.I. LOW LEVEL VITREOUS CHINAWARE CISTERN complete with flush bend all other necessary Fittings instead of C.I high level cistern complete with fittings. (i) White. [HSR 30.12 (i)]. | BI01010001010000000000000515BI0100001140 | 1 | Each |
| 29 | 29 | EXTRA OVER item nos. 30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow Black or white plaster seat and lid.(i) White plastic seat (Solid). [HSR 30.13 (i)]. | BI01010001010000000000000515BI0100001141 | 1 | Each |
| 30 | 30 | Providing & Fixing in position best indian make (ordinary) lavatory suites consisting of:- (v) Size 560 mm x 450 mm with one no. tap. [HSR 30.41(v)]. | BI01010001010000000000000515BI0100001142 | 1 | Each |
| 31 | 31 | Providing and Fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers flages for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge. [HSR 30.119]. 1000 Ltrs. Capacity Water Tank | BI01010001010000000000000515BI0100001143 | 1 | Each |
| 32 | 32 | Fe-500 EQR TMT steel bar for RCC work, where not included in the complete rate of RCC including bending, binding & placing in the position complete. (Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. From the length so measured, the weight of reinforcement shall be calculated in tones on the basis of IS:1732. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing, shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement). (NS). | BI01010001010000000000000515BI0100001144 | 3.47 | P.Qtl. (per Quintal) |
| 33 | 33 | Earth work non plastic or Tibba Sand under floors taken from outside of campus area with all lead and lift including loading, unloading, laid in 15 cm layer including ramming, watering, consolidating, compaction, and compensation of earth etc., complete in all respect as per the direction of engineer in charge. (NS) | BI01010001010000000000000515BI0100001145 | 6.92 | P.Cum (Per Cubic Metre) |
| 34 | 34 | Providing & Fixing of Mirror Fancy (Big Size) complete in all respect to the entire satisfaction of the Engineer - in - Charge. (N.S.) | BI01010001010000000000000515BI0100001146 | 5 | Each |
| 35 | 35 | Providing & Fixing of Corner Glass Type complete in all respect to the entire satisfaction of the Engineer - in - Charge. (N.S.) | BI01010001010000000000000515BI0100001147 | 16 | Each |
| 36 | 36 | Providing & Fixing of paper Holder complete in all respect to the entire satisfaction of the Engineer - in - Charge. (N.S.) | BI01010001010000000000000515BI0100001148 | 6 | Each |
| 37 | 37 | Providing & Fixing of Towel Stand Heavy Stainless steel complete in all respect to the entire satisfaction of the Engineer - in - Charge. (N.S.) | BI01010001010000000000000515BI0100001149 | 5 | Each |
| 38 | 38 | Providing & Fixing of Shower Heavy Big 8” with Flange complete in all respect to the entire satisfaction of the Engineer - in - Charge. (N.S.) | BI01010001010000000000000515BI0100001150 | 3 | Each |
| 39 | 39 | Providing & Fixing of PVC Pipe ½” complete in all respect to the entire satisfaction of the Engineer - in - Charge. (N.S.) | BI01010001010000000000000515BI0100001151 | 27.44 | P.Rmtr. (Per Running metre) |
| 40 | 40 | Providing & Fixing of Concealed Valve Brass complete in all respect to the entire satisfaction of the Engineer - in - Charge. (N.S.) | BI01010001010000000000000515BI0100001152 | 4 | Each |
| 41 | 41 | Providing & fixing of Acrylic Fibre Sheet shed with 2mm thick sheet with iron frame complete in all respect to the entire satisfaction of the Engineer - in - Charge. (N.S.) | BI01010001010000000000000515BI0100001153 | 50.44 | P.Sqm (Per Square Metre) |
