Supply And Installation Of Jhule , Benches , Gym Equipments In Parks At New Kilokari Colony , Dtl .
Tender Value
21.87 Lakhs
Estimated cost
Bid Submission
23 Aug 2019
0 days left
EMD
43800
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
As per EnC → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Installation Of Jhule , Benches , Gym Equipments In Parks At New Kilokari Colony , Dtl .
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | Air Walker: Providing, designing and fixing of Air walker of size 1100x550x1480mm fabricated with main post of 114mm dia and 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintainance free bearing should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer-in-charge.The equipment shall be fitted with in- built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid). | item1 | 1 | EA |
| 2 | 2 | Sit up station: Providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. seat and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid). | item2 | 1 | EA |
| 3 | 3 | Air Swing:Providing, designing and fixing of air swing of size 1150x900x1250mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements.All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid). | item3 | 1 | EA |
| 4 | 4 | Horse rider station:Providing, designing and fixing of horse rider station of size 1000x600x1100mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements.All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid). | item4 | 1 | EA |
| 5 | 5 | Stair Stepper:Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 1000x800x1400mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements.All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid). | item5 | 1 | EA |
| 6 | 6 | Leg Press:Providing, designing and fixing of leg Press of size 2000x550x1600mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements.All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid seprately). | item6 | 1 | EA |
| 7 | 7 | Pull Chair:Providing, designing and fixing of Pull Chair in a pair of size 2500x8000x2000mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end .Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid seprately). | item7 | 1 | EA |
| 8 | 8 | Exercising bar: Providing, designing and fixing of exercising bar in a pair of size 1800x550x1700mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end .Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid seprately). | item8 | 1 | EA |
| 9 | 9 | Seated chest Press:Providing, designing and fixing of seated chest press of size 1800x700x2000mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements.All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid seprately). | item9 | 1 | EA |
| 10 | 10 | Arm Wheel:Providing, designing and fixing of arm wheel in a pair of size 850x800x1800mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements.All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid seprately). | item10 | 1 | EA |
| 11 | 11 | Elliptical exerciser:Providing, designing and fixing of elliptical exerciser of size 1200x540x1600mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements.All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid seprately). | item11 | 1 | EA |
| 12 | 12 | Double cross walker:Providing, designing and fixing of of size 1600x600x1600mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements.All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid seprately). | item12 | 1 | EA |
| 13 | 13 | Twister:Providing, designing and fixing of twister of size 1700x1300x1300mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Handle bars Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements.All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid seprately). | item13 | 1 | EA |
| 14 | 14 | Rowing Machine:Providing, designing and fixing of rowing machine of size 1280x800x1150mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40mm dia. and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness, UV resistant and colour as approved by Engineer in charge.Equipment to be fitted with inbuilt limiters to prevent unwanted movements.All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover , all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.(the cement concrete and excavation work shall be paid seprately). | item14 | 1 | EA |
| 15 | 15 | Providing & Fixing of MAPS 07 having Dimension: • Product Area : 7.9m x 4.8m (26ft x 15.6ft) • Safe Play Area : 9.9m x 6.6m (32.5ft x 22.5ft) • Age Group : 5-12 yrs • Friends at a time : 10 • Platform Height : 5ft\nTechnical Specification: •Platform:-Material:- FRP (Fiber Reinforced Plastic) with anti-skid surface on top. Thickness:- Minimum thickness of 3-5 mm and side flanges of 6-8 mm thickness Size:- Center to center distance 1160mm. Others:-Ribbed structure on bottom side, Shape : Hexagonal- •Brazing Frame:- ISA 25x25x5mm or ISA40x40x5mm thick and ISF 40x5mm thick which is galvanized and then duly Powder Coated. •Clamp:- Made by Nylon 6 material by Injection Molding Process which is UV stabilized and having better strength to give support to other parts. •Vertical Pipes:- 80NB GI pipes. Wall thickness as per the class of pipe used •FRP Spiral Slide:-The Spiral Slide & Slide Platform is made up of Fiber Reinforced Plastic (FRP) in one piece. Center Support pipe made from 80NB Galvanized pipe welded to 100NB Galvanized pipe. Spiral slide railings consists of 20NB hot dip galvanized pipe bended to form frame with two pairs of clamps joined together to GI Pipe with SS304 graded non rusting nut-bolts, made from Nylon Grade-6 plastic. The ROTO molded plastic bush & roto molded slim railing a reinserted into the pipe frame in alternate pattern. The railing frame is bolted to Spiral slide platform with 20NB GI support pipe bolted to platform at one end & clamped with special nylon clamps to railing pipe frame. •ROTO Slide Entry:-Slide Entry of the slide is made up of LLDPE (Linear Low Density Polyethylene) by Rotational molding process. It is attached to deck pipe with the help of 20NB GI pipes and Injection Molded Nylon Clamps. •Spiral Climber:-The spiral structure of the Spiral Climber is fabricated out of 25NB GI pipes and supported vertical support pipes of 40NB.The centre pole of the Spiral Climber is made up of 40NB GI pipe. It is attached to vertical deck pipes with the help of 20NB GI pipe & specially designed nylon clamps. •MAPS Double Swing:-In the double swing the leg support is made up of 40 NB GI pipes and top pipe is of 50 NB GI pipes with GI junction box with powder coating. The swing seats are made up of 10mm thick anti-skid chequered reinforced rubber top. The rubber belt seat is suspended on 6mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. •FRP Hexagonal Canopy:-The Hexagonal canopy is made of FRP (Fibre Reinforced Plastic) with a minimum thickness of 2-3 mm. The canopy is assembled from six modules and at the top flag is fixed. •ROTO Flag:-This ROTO Flag is made up of rotational molding process which consists of LLDPE mixed with UV stabilized food grade material for making it UV resistant. •Cross Checkered Railing:-Railings are provided as barrier for safety purpose. Cross Checkered Railing is made up of LLDPE (Low-Density Polyethylene Plastic) in rotational molding process and has a support of 20 NB powder coated GI pipes. The railing is attached to the support pipe using an Injection Molded Nylon Clamps. PGMP07 MAPS 07 •FRP Ladder 5ft:-Size:- 5ft Material:- FRP (Fibre Reinforced Plastic) with a minimum thickness of 3-5mm. The top surface of the ladder is anti-skid to avoid slippery movements. There is also provision for Handrails on ladder for better grip. The ladder is supported by stand made up of 25NB G.I. pipe and 50x10mm thick flat from the bottom. •Metal Roller Slide: In the roller slide the rollers are made up of LLDPE (Low Density Polyethylene) with UV stabilized pigment and having thickness of 4-5 mm. Rollers are mounted on 12 mm diameter rod and fixed in slide chute. The frame of the slide is made from 50x50x5 MS angle which is galvanized and then duly Powder Coated. Handrail is made up of 25 NB GI pipes. The landing support is made from 25 NB pipes. •FRP (FIBER REINFORCED PLASTIC):-All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test).\" •LLDPE (LINEAR LOW DENSITY POLYETHYLENE):-The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.\n•Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •Pipe Materials or Class: Medium Duty ('B' Class) & Light Duty ('A' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. \n | item15 | 1 | EA |
| 16 | 16 | Providing & Fixing of Animal MGR having Dimension: • Product Area : 2.1m Dia (7 ft Dia.)\n• Safe Play Area : 3.1m Dia (10.2 ft Dia.)\n• Ideal For : 3-12 Years, • Friends at a time : 5\nTechnical Specification:\n•MGR frame : MGR Frame made from 40NB pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the animal (duck) over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. The GI plated bowl is used to cover the top of the bearing assembly. •Bearing assembly: Bearing assembly with two bearings 1. Ball Bearing used for smooth rolling action. 2. Taper Roller Bearing take vertical thrust due to rolling moment & applied weight. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. •Center support: 80NB hot dip galvanized center support pipe of length 500mm conforming to IS 1239 with GI thickness of 60µ .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200mm for assembling the bearing. •Foot rest: Foot rest made from 15NB Galvanized pipe with end caps welded to two plates for minga foot rest. •Duck: Duck is made out of molded plastic in rotational molding process. •Rotational Molded Products: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness upto 60micron. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.\n | item16 | 1 | EA |
| 17 | 17 | Providing & Fixing of Multi Seater see-saw having Dimension: • Product Area : 0.5m X 3m (1.6ft X 9.8ft) • Safe Play Area : 1.5m X4m (4.9ft X 13.1ft) , • Ideal For : 3-10 Years • Friends at a time : 4 \nTechnical Specification:\n•Handle grip:Hand Grip conforming to EN 1176-1:2008 for requirement of hand grip. It is made from 20NB Galvanized pipe with end caps •See-saw lever:See Saw Lever made from 80NB Galvanized Pipe of 2950mm long conforming standards IS 1239 with strong load carrying capacity •Seat :It is made from rotational moulded material.It is 295x190x70mm Rotational molded seat with grip. •For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •See-saw stand : See Saw stand with special Nylon-6 bush enclosed in a seamless pipe hinged to 50NB Support pipe. The stand is fixed with ISA for strong foundation grip. •See Saw impact attenuator:It is made from 20NB Galvanized pipe •Bearing:The bearing used in this item is heavy duty nylon bush type •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.\n | item17 | 2 | EA |
| 18 | 18 | Providing & Fixing of FRP Wave Slide 2.1 Mtr having Dimension: • Product Area : 5m x 0.6m (18ft x 8.2ft) • Safe Play Area : 6.5m x 3.5m (21.3ft x 11.5ft) • Age Group : 4-12 yrs\nTechnical Specification:\n•Small H-Support: It is made from 25NB GI Pipe length 600mm with 10mm tor rod of length 300 mm for support & strong foundation •Medium H-Support:25NB GI Pipe length 1490mm with 10mm tor rod of length 300mm for support & strong foundation •Center support pipe: 80NB hot dip galvanized Deck pipe of length 2590mm conforming to IS 1239 with GI thickness of 60µ •Ladder Frame:The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 20 NB pipes respectively.\n•Ladder Step:Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176-1:1998 conforming to EN1176-1:1998. The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •Pipe Materials or Class: Medium Duty ('B' Class) & Light Duty ('A' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Platform: It is 16 SWG GI Plated Platform of size - 500x450x60mm •FRP Wave Slide:The amazing triple wave slide is made up of FRP.This FRP wave slide consists of ISI marked structure. The attractive FRP wave slide chute is made up of 4 mm thick fiber reinforced plastic. •For FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Powder coating: shall be done of pure polyester exteriors ultra-stabilized powder Paints. Thickness maintained is a minimum of 60-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.\n | item18 | 1 | EA |
| 19 | 19 | Providing & Fixing of Satellite Scrambler having Dimension: • Product Area : 2.4m X 2.4m (7.9ft X 7.9ft) • Safe Play Area : 3.4m X 3.4m (11.2ft X 11.2ft)\n• Ideal For : 4-12 Years • Friends at a time : 4-5 Technical Specification:\n• Globe shaped structural frame :Globe shaped structural frame made from 25NB Galvanized pipe conforming to IS 1239 with GI thickness upto 60µ fixed together over the support pipes. •Support frame : 40NB Support pipe conforming to IS 1239(Part 1):1979 & ladder frame made of 25NB pipe frame and 15NB pipe steps fixed to the support pipe •Chain ladder : Chain ladder made from Dia 8mm link chain with 15NB pipe steps. Ladder is attached to the globe frame on top and grounded at the bottom end. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class/ series of pipe used. •Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.\n | item19 | 1 | EA |
| 20 | 20 | Providing & Fixing of PreCast Concrete Bench. \nThe bench consists of 2 no.s L-Shape base support in cement colour of thickness 80 mm, back height 890 mm and front height 450 mm base width 690 mm as per sketch and 1 no. reinforcement concrete planks in red colour of size 1500X320X50mm and 1 no. of reinforcement cement concrete plank in red colour of size 1500X425X50 mm manufactured by using M-30 grade of concrete and reinforced suitably to prevent damage during handing, transportation erection and long use. All bolts are sealed after assembly. Seating length of the bench 1500 mm seating height of the bench 450 mm, total height of the bench 890 mm. Bench top and back planks are treated with special anti corrosive water proof coating so as to make surfaces glossy and water proof. | item20 | 25 | EA |
| 21 | 21 | Providing & Fixing of Stainless Steel Bin : \nSS Grade 304, dustbin (perforated type) of size (14'' X 28'') in a concrete 1:2:4 of supported design. The sheet thicness would be of 0.8 mm and 1.2 mm for dustbin and stand pipe respectively as per standard design. | item21 | 30 | EA |
| 22 | 22 | Excavating holes more than 0.10 cum and upto 0.5cum incl. Getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, incl. Consolidating each deposited layer by ramming, watering etc. Disposing of surplus excavated soil, as directed within a lead of 50m and lift upto 1.5m. a) All kind of soil. | item22 | 40 | EA |
| 23 | 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering: All work upto plinth level: a) 1:1.5:3( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) | item23 | 9 | M3 |
| 24 | 24 | Providing and fixing label of equipment made of stainless steel 0.7mm thick and fixed to the vertical post of gym equipment with stainless steel 6 Nos. Rivets and instructions printed by lazer printing with computer programme i/c test writing and photo of the equipment all complete as per direction of Engineer-in -charge.220x110mm size. | item24 | 30 | EA |
| 25 | 25 | Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10sqm.On plan incl. Disposal of excavated earth upto 50m and lift upto 1.5m. Disposed soil to be levelled and neatly dressed. All kinds of soil. | item25 | 180 | M2 |
| 26 | 26 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering-All work up to plinth level: a) 1:5:10 (1 cement :5 coarse sand(Zone-III): 10 graded stone aggregate 40mm nominal size) | item26 | 25 | M3 |
| 27 | 27 | Cement concrete flooring 1:2:4( 1cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. Complete. 40mm thick with 20mm nominal size stone aggregate. | item27 | 180 | M2 |
| 28 | 28 | Providing and fixing rubber tile flooring 25mm thick made of SBR ( Styrene -Butadiene-Rubber) with interlocking arrangements and adhesive all complete colour and size as approved by Engineer-in-charge. | item28 | 180 | M2 |
| 29 | 29 | (i) The maintenance work of all Jhule, open gym equipments, SBR Rubber tile flooring need to be carried out for five years. Out of five years, cost of maintenance for 1st and 2nd year shall be borne by contractor and nothing shall be payable. Subsequently for 3rd, 4th & 5th year, maintenance cost shall be payable to contractor @3% of total amount of all Jhule, open gym equipments, SBR Rubber tile flooring covered under item No: (1 to 19 and 28).\n\n(ii) Year wise Bifurcation for the payment payable to contractor for maintenance work shall be as under:\nMaintenance of all Jhule, open gym equipments, SBR Rubber tile flooring for the third year shall be 0.5% of total cost against item No: (1 to 19 and 28).\nMaintenance of all Jhule, open gym equipments, SBR Rubber tile flooring for the fourth year shall be 1% of total cost against item No: (1 to 19 and 28).\nMaintenance of all Jhule, open gym equipments, SBR Rubber tile flooring for the fifth year shall be 1.5% of total cost against item No: (1 to 19 and 28).\nNote: Rate quoted in this item should be total cost of all Jhule, open gym equipments, SBR Rubber tile flooring covered under item from S.No. (1 to 19 and 28) | item29 | 0.03 | EA |
AI Tender Summary
Tender Timeline
Aug 02, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 23, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 23, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender