}

Tender For Various Electrical Equipments And Allied Works Required To Be Carried Out For The Commissioning Of Wss Galbug ( Rw ), SD Pampore-Jammu And Kashmir

Public Health Engineering Department has published Tender For Various Electrical Equipments And Allied Works Required To Be Carried Out For The Commissioning Of Wss Galbug ( Rw ). Submission Date for this Tender is 12-08-2019. Dry Cell Batteries Tenders in SD Pampore Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

21257423
Tender For Various Electrical Equipments And Allied Works Required To Be Carried Out For The Commissioning Of Wss Galbug ( Rw )
Tender
Indian
Jammu And Kashmir
Sd Pampore
12-08-2019

Tender Details

Tender For Various Electrical Equipments And Allied Works Required To Be Carried Out For The Commissioning Of Wss Galbug ( Rw ) -1 Supply Installation, Testing And Commissioning Of Modular Control Panel: Nthe Modular Control Panel Shall Be Totally Enclosed, Free Standing Type, Sheet Metal Enclosed, Dust & Vermin Proof, Ip - 44 Enclosures And Shall Be Suitable For Ac, 3 – Phase, Voltage & Frequency As 380 ± 15% Volts And 50±3% Hz Respectively And Internally Wired. Fitted With Mug 20 Fasd And Accessories As Per Annexure A 2 S / I / T / C Of 16 Sq. Mm, 3 Core Flat Submersible Cable For Interconnecting Of Various Electrical Gadgets Through Proper System Including Thimbles Of Appropriate Size Including All Thimbles Crimping Taping Etc ( Polycab Or Havell’S Make ) To Be Used At Raw Water Stage 3 Shifting Of Available Electrical Poles Lying At Water Supply Scheme Galbugh Filter Water To Raw Water . The Job Includes Digging Of 02 No Of Pits Of Dimensions 2’X2’X3’ At Raw Water Stage Followed By Providing And Laying Of Stone Soling 150Mm & Erection Of The Poles At The Said Position, By Plain Cement Concrete In 1:4:8 Mix 4 S / I / T / C Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items. N2 Way Terminal Connector 20 Amp. 2 No Mcb 8 Amp. Nmake: Philips / Bajaj / Havells N 5 S / I / T / C Of Flood Lights 120 Watt Led ( Street Light Type ) Ninput: 90-240 V 50 Hz Power Factor: >0.9 Ncolour Temperature: 4K - 6.5K Beam Angle: 120° - 170° Nmakes: Philips / Bajaj / Havells With Minimum Two Years Replacement Warranty. N 6 S / I / T / C Of 2Cx10 Mm² Xlpe Aluminium Armoured Cable From The Connector Of High Mast Pole To The Stabilizer. The Job Includes Underground Laying Or Overhanging As Per Requirement And Directions Of The Site In Charge. Nmake: Havel’S / Gloster. N 7 S / I / T / C Of Earthing Station For Electrical Gadgets Comprising Of Company Fabricated Earthing Electrode Gi As Per Is : 3043 . Nsafe Earthing Electrode Size : 80Mm Dia Length : 3000Mm Nback Fill Compound : 30 Kg Model / Make : Jmv, Ashlok / True Power. N 8 A ) P / F Of Lighting Points In 1.5 Mm Sq. Multi Strand Pvc Wire As Conducted To Be Laid / Carried In Pvc Channel / Conduit As Per Site Requirement. Nb ) P / F Of Heating Points In 2.5 Sq. Multi Stand Conductor Nc ) P / F Of Distribution Board Sp&N ( Regal Grey ) With 1 No. Of Incoming And Outgoing 16 Way, Make-Qve ( Db ) Havells Make, Fitted With Mini Mcb “C” Series 6 A- 8 No. For Lighting In Pump House. 10 A-4 No. For Flood Lights And 16 Amp. 3 No. For Heating Points 36 Amp. Mcb ( Mains ) -Havells Make. Nthe Job Includes The Cost 4Mm Sq. Multi Stranded Conductor To Be Laid As Service Line For Lighting System. Nd ) Providing And Fitting Of Ceiling Fans Of Bajaj / Havell’S Make Having 1200Mm Sweep. 9 S / I / T / C Of 12 Volt 19 Plate Dc Battery ( Make :Exide ) Of 150 Ah Along With 800Va Inverter ( Make: Exide ) At The Operator Room.The Job Includes The Cost Of Wiring And Three Number Lighting Points In 3 / 20 Copper Conductor With 9 Watt Led Lamps Fitted In Holders Along With The Conduit. 10 Shifting Of 25Kva Diesel Generator From The Premises Of Scheme To The C.G.I Shed Using Manual Labour, Channels And Other Tools Required For Carrying Out The Job. The Job Also Includes Fitting Of Available 100Amp On-Load Change Over Switch Inside Operator Room And Connecting The D.G Set To The Change Over Switch Using Copper Conducter Available At Wss Galbug. The Job Also Includes Draining Out Old M-Oil And Coolant From D.G Set And Filling Of New M-Oil And Coolant Of Hp / Shell Make And Then Testing Of D.G Set On No Load And Full Load Conditions. 11 S / I / T / C Of 12 Volt 19 Plate Dc Battery Of 150 Ah Of Exide Make For D.G Set. 12 S / I / T / C Of 200A Mccb Enclosed In Ms Enclosure And To Be Fitted On Ms Pole Of Electric Sub-Station To Work As Circuiting Breaker . Nqty = 1 No. Make = L & T Nmodel / Version = D Sine Series, 4-Pole Rated Operational Voltage = 415 V + 15 % Ncurrent Rating = 200Amp N

Key Value

Document Fees
INR 250 /-
EMD
INR 8000.0 /-
Tender Value
INR 4 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail