Providing Slrm ( Solid Liquid Resource Management ) And Compositing Pit For Solid Waste Management At Pragati Nagar Colony Of Dipka Area ( Retender )
Tender Value
41.55 Lakhs
Estimated cost
Bid Submission
14 Aug 2019
0 days left
EMD
52000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
DIPKA CG → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Slrm ( Solid Liquid Resource Management ) And Compositing Pit For Solid Waste Management At Pragati Nagar Colony Of Dipka Area ( Retender )
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | CIVIL WORKS | |||
| 2 | 1.01 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | 611.96 | Cum | |
| 3 | 1.02 | Transportation of earth by mechanical means with a lead of 2 KMs | 351 | Cum | |
| 4 | 1.03 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m,disposed earth to be levelled and neatly dressed. All kinds of soil | 351 | Cum | |
| 5 | 1.04 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 70.1 | Cum | |
| 6 | 1.05 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) | 69.36 | Cum | |
| 7 | 1.06 | Brick work in using fly ash bricks with cement mortar 1:6 (1 cement :6 coarse sand ) in foundation and plinth complete as per instruction of Engineer-in-Charge. | 41.36 | Cum | |
| 8 | 1.07 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 33.01 | Cum | |
| 9 | 1.08 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. | 399.18 | Sqm | |
| 10 | 1.09 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 70.2 | Cum | |
| 11 | 1.1 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns. | 176.32 | Sqm | |
| 12 | 1.11 | Brick work in using fly ash bricks with cement mortar 1:6 (1 cement :6 coarse sand ) in super structure complete as per intruction on Engineer-in-Charge. | 131.05 | Cum | |
| 13 | 1.12 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | 6.1 | Cum | |
| 14 | 1.13 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts. | 172.08 | Sqm | |
| 15 | 1.14 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers. | 57.8 | Sqm | |
| 16 | 1.15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Cold twisted bars | 2589.6 | Kg | |
| 17 | 1.16 | Half brick work using fly ash bricks in super structure in cement mortar 1:4 ( 1 cement:4 coarse sand) complete as per instruction of engineer-in-Charge. | 54.25 | Sqm | |
| 18 | 1.17 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 2531.82 | Kg | |
| 19 | 1.18 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | 180.75 | Kg | |
| 20 | 1.19 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. | 3278.88 | Kg | |
| 21 | 1.2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 462 | Sqm | |
| 22 | 1.21 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm). | 33 | Metre | |
| 23 | 1.22 | Extra for providing and fixing wind ties of 40x 6mm flat iron section. | 198 | Metre | |
| 24 | 1.23 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | 926.31 | Sqm | |
| 25 | 1.24 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) | 258.66 | Sqm | |
| 26 | 1.25 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centering, shuttering but excluding cost of reinforcement, with1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mmnominal size). | 0.68 | Cum | |
| 27 | 1.26 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. | 1 | Each | |
| 28 | 1.27 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 110 mm diameter | 12 | Metre | |
| 29 | 1.28 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 75 mm diameter | 20 | Metre | |
| 30 | 1.29 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. | 1 | Each | |
| 31 | 1.3 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 25 mm dia. nominal bore | 50 | Metre | |
| 32 | 1.31 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 20 mm dia. nominal bore | 20 | Metre | |
| 33 | 1.32 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 15 mm dia. nominal bore | 15 | Metre | |
| 34 | 1.33 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore | 6 | Each | |
| 35 | 1.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 1000 | Litre | |
| 36 | 1.35 | White washing with lime to give an even shade: New work (three or more coats) | 926.31 | Sqm | |
| 37 | 1.36 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 196 | Kg | |
| 38 | 1.37 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces. | 29.55 | Sqm | |
| 39 | 1.38 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. | 66.48 | Sqm | |
| 40 | 1.39 | Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teakwood and priming coat with approved steel primer all complete. | 153.3 | Sqm | |
| 41 | 1.4 | Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. | 2 | Each | |
| 42 | 2 | BORE HOLE | |||
| 43 | 2.01 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia. | 90 | Metre | |
| 44 | 2.02 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia. | 35 | Metre | |
| 45 | 2.03 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings &accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia. | 60 | Metre | |
| 46 | 2.04 | Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading &sizes as per actual requirement, all complete as per direction of Engineer-in-charge. | 5 | Cum | |
| 47 | 2.05 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. | 4 | Hour | |
| 48 | 2.06 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150 mm dia | 2 | Each | |
| 49 | 2.07 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp. | 2 | Each | |
| 50 | 2.08 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I). 150 mm dia | 2 | Each | |
| 51 | 2.09 | Supplying installation and commissioning of submersible pump set 3 phase 5HP stage 8 head range 90-120 Mts pump set OD 100 mm dia delivery size 50 mm dia etc. approved make ISI Mkd IS 8034 & Motor IS 4283-1995 | 1 | Each | |
| 52 | 2.1 | Providing and fixing 3 phase stater control panel - L&T make or equivalent forsubmersible pump set motor capacity 5HP IS mkd | 1 | Each | |
| 53 | 2.11 | Providing and fixing 3 core flat copper cable 4 sqmm of approved ISI mkd for submersible pump | 120 | Metre | |
| 54 | 2.12 | P & F of 6 mm dia wire rope with PVC insulation. | 120 | Metre | |
| 55 | 2.13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 50 mm nominal outer dia. Pipes. | 90 | Metre | |
| 56 | 3 | Total impact of GST for the purpose of CTC | 1 | Nos. |
AI Tender Summary
Tender Timeline
Aug 02, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 16, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender