Special Repairs To Bldg No . P-187 At New Mil Stn Kapurthala Under Ge Kapurthala . Please Refer Tender Document
Tender Value
30 Lakhs
Estimated cost
Bid Submission
21 Aug 2019
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar Cantt → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repairs To Bldg No . P-187 At New Mil Stn Kapurthala Under Ge Kapurthala . Please Refer Tender Document
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | Dismantling timber scantlings 40 sq. cm and over in section as in unframed section complete all as specified and directed. | 2 | Cum | |
| 2 | 2 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. | 100 | Sqm | |
| 3 | 3 | S&F steel work in tubular/square/rectangular trusses, rafters, purlin and posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 complete all as specified and directed. | 650 | Kg | |
| 4 | 4 | Material & labour for rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters including a shop coat of red oxide conforming to Fe-410-W (Gde E-250 quality A)complete all as specified and directed. | 300 | Kg | |
| 5 | 5 | Material & labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. | 17 | Sqm | |
| 6 | 6 | Material & labour for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. | 100 | Sqm | |
| 7 | 7 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. | 145 | Cum | |
| 8 | 8 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. and getting out complete all as specified and directed. | 12 | Cum | |
| 9 | 9 | Material & labour for hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. | 7 | Cum | |
| 10 | 10 | Material and labour for 75 mm thick PCC type D2 1:4:8( 40mm graded stone aggregate) as in sub base of floor etc complete all as specified and directed. | 200 | Sqm | |
| 11 | 11 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm\nthick, spread, levelled and rammed including watering complete all as specified and directed.(Moorum shall be brought from outside MoD land) | 7 | Cum | |
| 12 | 12 | Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed. | 145 | Cum | |
| 13 | 13 | Returning, filling in including, spreading, levelling, watering and well ramming in layers not exc 25cm in soils complete all as specified. | 5 | Cum | |
| 14 | 14 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. | 7 | Cum | |
| 15 | 15 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. | 60 | Sqm | |
| 16 | 16 | Material & labour for 15mm thick cement plaster in cement mortar (1:4) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified | 765 | Sqm | |
| 17 | 17 | Material & labour for 15mm thick cement plaster in cement mortar (1:6) on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified | 200 | Sqm | |
| 18 | 18 | Material & labour for preparation of new plastered surface of walls and applying one coat of birla white putty to obtain the true line to achieve smooth surface and applying two coats of OBD complete all as specified and directed. | 200 | Sqm | |
| 19 | 19 | Material & labour for preparation of newly plastered or unplastered surface of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed. | 765 | Sqm | |
| 20 | 20 | Material & labour for preparation of old plastered surface of ceiling and applying one coat of birla white putty to obtain the true line to achieve smooth surface and applying one coat of OBD complete all as specified and directed. | 150 | Sqm | |
| 21 | 21 | Material & labour for preparation of old plastered surface of walls or cornices with steel wire brushes, scrapping down smoke soors, moulds, moss and efflorescent salt, trading oil and greasy spots and applying two coats cement base paint complete all as specified and directed. | 900 | Sqm | |
| 22 | 22 | Material & labour for preparation of old plastered surface of walls and applying one coat of birla white putty to obtain the true line to achieve smooth surface and applying two coats of OBD complete all as specified and directed. | 1200 | Sqm | |
| 23 | 23 | Material & labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 180 | Sqm | |
| 24 | 24 | Material & labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 100 | Sqm | |
| 25 | 25 | Dismantling of ceiling of any description fixed in any position fixed with nails/screws including fillets complete all as specified and directed. | 165 | Sqm | |
| 26 | 26 | M&L for 12mm perforated particle board 600x600x 12 mm for ceiling on and including aluminium snap grid frame work of 605x605mm and including hangers 6mm dia GI upto (1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long including two coats of OBD complete all as specified and directed. | 165 | Sqm | |
| 27 | 27 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but not exc 4 sqm each for doors and windows complete all as specified and directed. | 4 | Each | |
| 28 | 28 | S&F aluminium anodized three track sliding window with two glazed shutters of size 25.4mmx38.10mmx2mm thick with frame of size 100mmx40mmx2mm thick with and including 4mm thick selected quality glass and one shutter with stainless steel wire mesh including good quality of beading, with necessary handle, locks, PVC rubber lining of transparent colour etc complete all as specified and directed. | 7 | Sqm | |
| 29 | 29 | S&F powder coated aluminium anodised double leaf shutters of size 100mmx40mmx2mm thick with frame of size 100mmx40mmx2mm thick including hydraulic door closer, 5mm thick plain glass with sun control film fixed with rubber beading using aluminium partition sections with good quality of door handle 150mm (02) for each leaf, tower bolt 200mm (02 No) for each leaf, aluminium sliding bolt 250mm (01 No) and mortarised lock 01 No etc complete all as specified and directed. | 6 | Sqm | |
| 30 | 30 | S&F semi circular shape/rectangular shape of size 100mm x40mmx 2mm thick fixed type windows/ventilators with standard aluminium sections 5 mm thick plain glass with sun control film fixed with rubber beading. complete all as specified and directed. | 4 | Sqm | |
| 31 | 31 | Demolition of cement concrete of any description and in any position not specifically provided for complete all as specified and directed. | 35 | Cum | |
| 32 | 32 | Material and labour for PCC type B-1 1:2:4 ( 20mm graded stone aggregate) as in coping/bed block/bed plate including use of formwork complete all as specified and directed. | 6 | Cum | |
| 33 | 33 | Material and labour for 100 mm thick cement concrete type C2 1:3:6 ( 40mm graded stone aggregate) as in sub base of floor etc complete all as specified and directed. | 300 | Sqm | |
| 34 | 34 | M&L for machine cut kota stone slab flooring 16-20 mm thick as in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing over and including screed bed of 15mm of CM 1:6 complete all as specified and directed. | 100 | Sqm | |
| 35 | 35 | All as per item No. 34 here in before but as in skirting/dado including cement plastering in CM 1:6 of 15 mm complete all as specified and directed. | 5 | Sqm | |
| 36 | 36 | Dismantling floor, hearth or wall tiling including granite, cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed. | 667 | Sqm | |
| 37 | 37 | Supply and fix granite work (of any type) 18-20mm thick machine cut as in steps, jambs, pillars, window cills, cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, rubbing and polishing laid over and including bedding layer or screed 15 mm thick in cement mortar 1:4 complete all as specified and directed. | 20 | Sqm | |
| 38 | 38 | M&L for coloured vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles of size not less than 600x600mm, in floors and skirting etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 20 mm thick CM (1:6) screed bed layer complete all as specified and directed. \n | 177 | Sqm | |
| 39 | 39 | Material & labour for glazed ceramic coloured tiles in vertical surface of size not less than 300x200mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. | 200 | Sqm | |
| 40 | 40 | Material & labour for coloured ceramic non skid tiles 7 to 8mm thick, area of each tiles not less than 300mmx300mm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles, over and including 15mm thick screed bed of CM (1:6) complete all as specified and directed. | 120 | Sqm | |
| 41 | 41 | Material & labour for coloured ceramic non skid tiles 7 to 8mm thick, area of each tiles not less than 350mmx350mm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles, over and including 15mm thick screed bed of CM (1:6) complete all as specified and directed. | 150 | Sqm | |
| 42 | 42 | M&L for continuous brick edging with old size bricks of sub class B with width equal to the depth of the brick, laid dry, on edge complete all as specified and directed. | 130 | RM | |
| 43 | 43 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade. complete all as specified and directed. | 200 | Sqm | |
| 44 | 44 | Supply and spread river sand under interlocking paver blocks by 25 mm thick sand cushion including watering & consolidation complete all as directed and directed \nNote : Punned down thickness shall be measured. | 5 | Cum | |
| 45 | 45 | Demolition of RCC of any description and in any position not specifically provided for complete all as specified and directed. | 13 | Cum | |
| 46 | 46 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. | 9 | Sqm | |
| 47 | 47 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work complete all as specified and directed. complete all as specified. | 12 | Sqm | |
| 48 | 48 | M&L for RCC (design mix) M-25, ( 20mm graded stone aggregate) as in plinth beam sides of concrete foundation & similar work complete all as specified and directed. | 10 | Cum | |
| 49 | 49 | M&L for RCC (design mix) M-25, ( 20mm graded stone aggregate) as in lintels & roof beam complete all as specified and directed. | 3 | Cum | |
| 50 | 50 | M&L for mild steel bars 10mm dia and over, cut to length, bent to shape\nrequired, including cranking, bending spirally for hooping for columns,\nhooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. | 700 | Kg | |
| 51 | 51 | All as per item No. 50 above but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders complete all as specified and directed. | 501 | Kg | |
| 52 | 52 | Taking up or down 15mm dia bore GI tubing and connections laid in floor/trenches or fixed to walls complete all as specified and directed. | 30 | RM | |
| 53 | 53 | S&F tube 'medium grade' galvanised, with all fitting and fixed size 15 mm bore complete to walls and ceiling etc complete all as specified and directed. | 30 | RM | |
| 54 | 54 | Supply & fix in repairs bib taps, cast copper alloy, fancy type chromium plated with crutch or butterfly handle screwed down, for 15 mm bore iron pipe complete all as specified and directed. | 27 | Each | |
| 55 | 55 | Supply & fix in repairs stop valve 15mm bore, cast copper alloy, chromium plated high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete fixed in repair all as specified and directed. | 10 | Each | |
| 56 | 56 | Supply & fix in repairs vitreous china squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern) with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe making good to match with existing surfaces complete all as specified and directed. | 4 | Each | |
| 57 | 57 | Supply and fix in repair 600mm x 450mm bevelled edge mirror of selected quality 5.5mm thick glass mounted on 6 mm thick commercial plywood & PVC frame moulding all around and fixed to wooden plug with chromium plated brass screws and cup washers including fixing arrangement as approved by Engineer -in- Charge. | 10 | Each | |
| 58 | 58 | S&F in repairs CI Nahani trap with grating and diameter of outlet 100 mm including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. | 5 | Each | |
| 59 | 59 | M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sun shades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed. | 28 | RM | |
| 60 | 60 | S&F in repairs of vitreous China urinals, bowl type of size 465x355x265 mm (flat back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe, flushing cistern etc) complete all as specified and directed. | 2 | Each | |
| 61 | 61 | Supply & fix in repairs push tap 15mm dia any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms) complete all as specified and directed. | 2 | Each | |
| 62 | 62 | S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe including PVC connection length of 450mm. complete all as specified and directed. | 3 | Each | |
| 63 | 63 | Supply & fix in repairs PVC valve less coloured (as per direction of GE) low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed. | 6 | Each | |
| 64 | 64 | Dismantling of water tanks of capacity exc 500 litre but not exc 1000 litre etc complete all as specified and directed. | 7 | Each | |
| 65 | 65 | S&F 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete with inlet outlet and overflow pipe all as specified and directed. complete all as specified. | 7 | Each | |
| 66 | 66 | Supply & fix in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed. | 12 | Each | |
| 67 | 67 | S&F in repair vitreous china wash basin with pedestal, white, flat back, size 550x400 mm including 15mm dia pillar tap chromium plated fancy type, including 15mm dia stop cock fancy type chromium plated, CP waste coupling, waste fittings, union and waste pipe 32 mm dia or required length and all necessary inlet, outlet connections complete all as specified and directed. | 8 | Each | |
| 68 | 68 | Supply & fix in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete screwed for 20mm bore dia of iron pipe or brass ferrule complete all as specified . | 12 | Each | |
| 69 | 69 | S&F in repairs vitreous china european type wash down water closet pan pedestal pattern of white colour including plastic water closet seat white closed pattern with flat bottom (with MS or CP hinging device ) and fixing bolts, P or S trap, necessary inlet & outlet connections including connecting to waste pipe flush cistern etc, complete all as specified and directed.\nNote: Flushing cistern shall be measured & paid separately | 6 | Each | |
| 70 | 70 | Taking down carefully existing point wiring aluminum/ copper conductor for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed. | 120 | Per Point | |
| 71 | 71 | Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated cable and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including sunken type pressed steel terminal boxes and plastic laminated white/ coloured top sheet cover 3.0 mm thick, for One light point / fan point/bell point controlled by one way switch and/or through regulator complete all as specified and directed. complete all as specified. | 84 | Per Point | |
| 72 | 72 | All as per item No. 71 above but one 3 pin socket outlet 5 amps on independent board complete all as specified and directed. complete all as specified. | 12 | Per Point | |
| 73 | 73 | All as per item No. 71 above but one 3 pin socket outlet 5 amps on same board with other switches, complete all as specified and directed. complete all as specified. | 12 | Per Point | |
| 74 | 74 | M&L for point wiring with 4 sqmm multistranded copper conductor PVC insulated FRLS unsheathed cable 1100 volt grade in PVC conduit medium gradeof size 20mm (ISI marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3mm thick plastic laminated sheet top cover with 4 sqmm single core, multi stranded copper conductor, PVC insulated unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 socket outlet on independent board complete all as specified and directed. complete all as specified. | 12 | Per Point | |
| 75 | 75 | Supply and fix switch piano flush button type, 5 Amps, 230V AC, single pole, one way complete all as specified and directed | 96 | Each | |
| 76 | 76 | Supply and fix switch piano flush button type, 15 Amps, 230V AC, single pole, one way complete all as specified and directed | 12 | Each | |
| 77 | 77 | Supply and fix bell push flush button type, 5 Amps, 230V AC, single pole, one way complete all as specified and directed | 12 | Each | |
| 78 | 78 | Supply and fix socket out let 2 in 1, 5 Amp 3 pin flush type 230/250 volts complete all as specified. | 24 | Each | |
| 79 | 79 | Supply and fix socket out let 2 in 1, 3 pin ,15 amps, flush type,multipurpose , 230/250 volts, AC complete all as specified. | 12 | Each | |
| 80 | 80 | Supply and fix ceiling rose surface type bakelite 65 x 50 mm three terminal PVC / Polycarbonate isolated body complete all as specified. | 80 | Each | |
| 81 | 81 | Supply and fix bell multi music type, 230V , single pole, complete all as specified and directed | 12 | Each | |
| 82 | 82 | Taking down carefully old unserviceable fluorescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same, and also making good the same to match with the existing surface.complete all as specified and directed. | 60 | Each | |
| 83 | 83 | Supply, installation, testing and commissioning of 20 watt 4 ft long LED batten housing made of extruded aluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000K, power factor should be greater than 0.9 including LED 20W and with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed.\nMake: C&S cat part No. LTDC01220WLED/WD or equivalent makes as in Appx 'B' | 60 | Each | |
| 84 | 84 | Taking down u/s MCBs and S&F MCB, 10 to 32 amp, SP, 240 volt including necessary connection complete all as specified and directed. | 24 | Each | |
| 85 | 85 | Taking down u/s MCBs and S&F MCB, 25 to 32 amp, SPN, 240 volt including necessary connection complete all as specified and directed. | 6 | Each | |
| 86 | 86 | Taking down old unserviceable sub main wiring 4.00 sqmm 1100 volts grade two runs of single core PVC insulated, unsheathed copper conductor, including taking down casing capping/PVC conduit complete all as specified and directed. | 85 | RM | |
| 87 | 87 | Material & labour for submain wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated copper conductor cable (FRLS) 1100 volts grade drawn PVC concealed conduit of size 20mm (ISI marked) including PVC accessories complete including cutting and chasing and making good etc including one run of 6 sqmm single core copper conductor multistranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-in-charge. Note : Two run of 6sqmm cable and one run of 6sqmm cable as earth continuity conductor and one run of PVC conduit will be measured & paid as one unit. | 85 | RM | |
| 88 | 88 | Taking down old u/s lamp holder and S&F lamp holder PVC/polycarbonate with back plate suitable for batten fittings including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. | 24 | Each | |
| 89 | 89 | Taking down old unserviceable wall mounting fitting and supply & fix decorative wall mounting type with polycarbonate rings, and glass shade with lamp holders connectors block including 1 x09 watt LED bulb glass fitted engineering plastic B22 lamp holder with electrical copper contracts, self screwed polycarbonate diffuser in opal finish for soothing light effect, LED 09 watt etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. \nMake : Havells cat part No. LHDLO3160099 or equivalent makes as in Appx 'B' | 12 | Each | |
| 90 | 90 | Taking down old unserviceable bulkhead fitting and supply & fix 6 watt LED bulkhead fitting in engineering plastic housing and top frame with opal PMMA diffuser suitable for 1 x 06 watt LED bulb including 01 No LED 6 Watt with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. \nMake : C&S cat part No. CG80IB6WLED or equivalent makes as in Appx 'B' | 12 | Each | |
| 91 | 91 | Taking down old U/S DB and Supply & fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as specified and directed. | 4 | Each | |
| 92 | 92 | Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 20 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. \nNote :- (I) Earth pit shall be constructed 50cm away from the side of excavation to avoid sinking of pit and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.\n(II) PCC chamber shall be (1:3:6) type C1 using 20mm graded stone aggregate and 40mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed. \n(iii) Item includes the cost of 7.5 m GI pipe for protection of earth wire/strip any variation in length shall be adjusted through deviation order.\n(iv) Item includes the cost of 7.5 m earth lead wire/strip any variation in length shall be adjusted through deviation order. | 4 | Each Job | |
| 93 | 93 | Taking down old unserviceable regulator and S&F electronic fan regulator stepped type, on phenolic laminated sheet etc suitable for ceiling fan complete all as specified.\n | 12 | Each | |
| 94 | 94 | Supply , laying, jointing and testing XLPE PVC insulated, & PVC bedded galvanised steel strip or wire armoured, electric cable (heavy duty) 1100 volts grade with standard aluminium conductor, cross sectional area 50 sqmm 3.5core complete all as specified and directed | 150 | RM | |
| 95 | 95 | Taking up or down old unserviceable GI tubing and S&F 40mm dia GI tubing 'light grade' galvanised, with all fitting laid in trenches/ fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed. | 30 | RM | |
| 96 | 96 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth in hard/dense soil for taking out/ laying of cable/GI pipe and getting out complete all as specified and directed. | 35 | Cum | |
| 97 | 97 | Returning filling in including spreading,levelling,watering, well ramming in layers not exc 25 cm each back in trenches after cables have been laid and tested, poles, stays, struts have been erected and tested complete all as specified and directed. | 23 | Cum | |
| 98 | 98 | Removal of surplus soil to a distance not exc 50 m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed. | 12 | Cum | |
| 99 | 99 | Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15 cm above the cables all as directed and directed \nNote : Punned down thickness shall be measured. | 10 | Cum | |
| 100 | 100 | Supply and lay old size bricks sub class 'B' standard size laidacross the cable in trenches as protection to the cable complete all as specified and directed. | 1.17 | Per 1000 Nos |
AI Tender Summary
Tender Timeline
Jul 31, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 23, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender