| 1 | 1 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m In ground floor including roof.(a) upto 150 mm. thick | BI01010001010000000000000515BI0100001113 | 20 | CuM. |
| 2 | 2 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge | BI01010001010000000000000515BI0100001114 | 20 | CuM. |
| 3 | 3 | Taking out heavy iron grated door or window (jail pattern or existing) with locking arrangement after cutting out from walls and refixing the same including mending all damages.[Mending charges to be paid separately] | BI01010001010000000000000515BI0100001115 | 100 | SqM. |
| 4 | 4 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips\n(20 mm nominal size) excluding shuttering and reinforcement,if\nany, in ground floor as per relevant IS codes. (b ) River bazree | BI01010001010000000000000515BI0100001116 | 5 | CuM. |
| 5 | 5 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. | BI01010001010000000000000515BI0100001117 | 300 | SqM. |
| 6 | 6 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar\nincluding rounding off or chamfering corners as directed and\nraking out joints including throating, nosing and drip course,\nscaffolding/staging where necessary (Ground floor).[Excluding\ncost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster | BI01010001010000000000000515BI0100001118 | 150 | SqM. |
| 7 | 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (c) 10 mm thick plaster | BI01010001010000000000000515BI0100001119 | 150 | SqM. |
| 8 | 8 | Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) | BI01010001010000000000000515BI0100001120 | 200 | SqM. |
| 9 | 9 | Scraping and removing greasy soot from walls or ceiling of kitchen or similar smoke affected rooms and preparing the surface. | BI01010001010000000000000515BI0100001121 | 100 | SqM. |
| 10 | 10 | Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineerin- charge). | BI01010001010000000000000515BI0100001122 | 1200 | SqM. |
| 11 | 11 | Removing loose scales, blisters etc. from old painted surface and\nthoroughly smoothening the surface to make the same suitable for\nreceiving fresh coat of paint. | BI01010001010000000000000515BI0100001123 | 750 | SqM. |
| 12 | 12 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) | BI01010001010000000000000515BI0100001124 | 200 | SqM. |
| 13 | 13 | Applying Exterior grade Acrylic primer of approved quality and\nbrand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface\nthroughly, complete as per manufacturer's specification and as per\ndirection of the EIC. In Ground Floor: (b) Two coats . | BI01010001010000000000000515BI0100001125 | 750 | SqM. |
| 14 | 14 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) \nb) Premium 100% Acrylic Emulsion | BI01010001010000000000000515BI0100001126 | 750 | SqM. |
| 15 | 15 | Applying Interior grade Acrylic Primer of approved quality and brand\non plastered or cencrete surface old or new surface to receive\nDistemper/ Acrylic emulsion paint including scraping and preparing\nthe surface throughly, complete as per manufacturer's specification\nand as per direction of the EIC. (In Ground Floor) (b) Two Coats ii) Solvent based interior grade Acrylic Primer | BI01010001010000000000000515BI0100001127 | 1200 | SqM. |
| 16 | 16 | Applying Acrylic Emulsion Paint of approved make and brand on walls\nand ceiling including sand papering in intermediate coats including\nputty (to be done under specific instruction of Superintending Engineer) :\n(Two coats) ii) Luxury Quality | BI01010001010000000000000515BI0100001128 | 1200 | SqM. |
| 17 | 17 | Priming one coat on steel or other metal surface with synthetic oil\nbound primer of approved quality including smoothening surfaces by\nsand papering etc. | BI01010001010000000000000515BI0100001129 | 50 | SqM. |
| 18 | 18 | Copal varnish of approved quality including preparing surface :\n(i) On new wood work :\n(b) Two coats | BI01010001010000000000000515BI0100001130 | 20 | SqM. |
| 19 | 19 | Painting with best quality synthetic enamel paint of approved make\nand brand including smoothening surface by sand papering etc.\nincluding using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) -\n(iv) Two coats (with any shade except white)\n\n | BI01010001010000000000000515BI0100001131 | 50 | SqM. |
| 20 | 20 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).\n(b) Ordinary teak. | BI01010001010000000000000515BI0100001132 | 0.3 | CuM. |
| 21 | 21 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).\n(c) Sal : Siliguri. | BI01010001010000000000000515BI0100001133 | 0.3 | CuM. |
| 22 | 22 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor.\n(In case of non-supply of single plank, penal rate of reduction of 20% will be made)\n(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.\n(a) Ordinary Teak Wood | BI01010001010000000000000515BI0100001134 | 10 | SqM. |
| 23 | 23 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100mm x 58mm x 1.9mm | BI01010001010000000000000515BI0100001135 | 30 | Each |
| 24 | 24 | Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed complete.\n(i) 150mm plate x 10mm dia rod x 12mm hexagonal/fluted. \n | BI01010001010000000000000515BI0100001136 | 10 | Each |
| 25 | 25 | Iron socket bolt of approved quality fitted and fixed complete. (c) 150mm long x 10mm dia bolt. | BI01010001010000000000000515BI0100001137 | 20 | Each |
| 26 | 26 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting\n(a) 200mm long | BI01010001010000000000000515BI0100001138 | 5 | Each |
| 27 | 27 | ii) Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.\n(a) 200mm long | BI01010001010000000000000515BI0100001139 | 5 | Each |
| 28 | 28 | Labour charge for fabrication and installation of composite door, window , partitions made from annodized extruded alloy aluminium sections for the following units:-(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Poly Shulphate sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleate angle etc. but excluded the cost of extruded aluminium sections, glass, neoprene / EPDM gasketing, locking arrangement and rollers i ) 2 track sliding window. | BI01010001010000000000000515BI0100001140 | 80 | SqM. |
| 29 | 29 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I)Natural white a) 2- track sliding window i) Bottom frame | BI01010001010000000000000515BI0100001141 | 50 | M |
| 30 | 30 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white a) 2- track sliding window ii) Top and side frame. | BI01010001010000000000000515BI0100001142 | 200 | M |
| 31 | 31 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white d) Shutter for all track sliding window. i) Bottom & Top member. | BI01010001010000000000000515BI0100001143 | 100 | M |
| 32 | 32 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film I) Natural white d) Shutter for all track sliding window ii) Style side member. | BI01010001010000000000000515BI0100001144 | 150 | M |
| 33 | 33 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white d) Shutter for all track sliding window iii) Interlock member. | BI01010001010000000000000515BI0100001145 | 50 | M |
| 34 | 34 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835- 1987iii) 5mm thick clear glass. | BI01010001010000000000000515BI0100001146 | 75 | SqM. |
| 35 | 35 | Supplying bubble free float glass of approved make and brand\nconforming to IS: 2835-1987\niv) 5mm thick coloured / tinted / smoke glass. | BI01010001010000000000000515BI0100001147 | 5 | SqM. |
| 36 | 36 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.i) For sliding windowsb) 'U' shaped EPDM gasket for frames. | BI01010001010000000000000515BI0100001148 | 300 | M |
| 37 | 37 | Supplying maruti lock (100mm) | BI01010001010000000000000515BI0100001149 | 100 | Each |
| 38 | 38 | Supplying PVC rollers for sliding windows as per direction of Engineer in charge. | BI01010001010000000000000515BI0100001150 | 100 | Each |
| 39 | 39 | Labour charge for fabrication and installation of composite door, window , partitions made from annodized extruded alloy aluminium sections for the following units:-(B) Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge.The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleate angle etc. but excluded the cost of extruded alumium sections, glass,panel boards neoprene / EPDM gasketing, locking arrangement, weather gasketing / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. (10% rate reduction has to be made for swing doors or partitions where floor sping is not used. 10% enhancement of rate is to be made where door frame of extruded aluminium sections has to be fitted and fixed to masonry wall. 5% rate enhencement may be allowed for double leaf swing door. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening shall be taken to consideration.Payment for door frame sections are to be paid seperately). | BI01010001010000000000000515BI0100001151 | 15 | SqM. |
| 40 | 40 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:\n(vi) 200mm long x 10mm dia. Bolt | BI01010001010000000000000515BI0100001152 | 10 | Each |
| 41 | 41 | Supplying, Fitting & Fixing 30 mm thick Factory made moulded Door shutter, consisting of solid core single leaf flash door of 30 mm thickness lipped with 15 mm [5mmx3] thick x 30 mm wide on one style and top rail and 10 mm [5mmx2] thick x 30 mm wide of the other style and bottom rail. The inner panel laminated with 2 mm thick termite proof water proof and fire resistant moulded PVC sheet with raised panel designed in different plain/ or Prelam colour on one side after routing the moulded design on flash door and 2mm plain and or Prelam PVC sheet on other side using rubber adhesive on flash door and solvent cement adhesive on the PVC lipping etc. complete excluding hardwares as necessary as per direction of Engineer-in Charge, Manufacturer?s Specification and drawing..\nIn ground floor.\n(b) Moulded door using 2 mm Prelam moulded PVC sheet on both side. | BI01010001010000000000000515BI0100001153 | 10 | SqM. |
| 42 | 42 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).\n(A) In 10-12 Micron thickness Annodizing film I) Natural white k) Movable door shutter.i) Door frame. (Top & sides). | BI01010001010000000000000515BI0100001154 | 25 | M |
| 43 | 43 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white k) Movable door shutter.ii) Shutter :Top rail. | BI01010001010000000000000515BI0100001155 | 5 | M |
| 44 | 44 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white k) Movable door shutter.ii) Shutter :Bottom rail. | BI01010001010000000000000515BI0100001156 | 5 | M |
| 45 | 45 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white k) Movable door shutter.ii) Shutter :Lock rail | BI01010001010000000000000515BI0100001157 | 5 | M |
| 46 | 46 | Supplying Heavy Duty Aluminium Handle (EBCO Type)\n(Natural White) | BI01010001010000000000000515BI0100001158 | 20 | Each |
| 47 | 47 | Supplying heavy duty top pin/set of pivots of local make and approved by the Engineer-incharge. (This item to be provided where floor spring not used). | BI01010001010000000000000515BI0100001159 | 10 | Each |
| 48 | 48 | Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -Charge.i) 150 mm. | BI01010001010000000000000515BI0100001160 | 10 | Each |
| 49 | 49 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.iii) weather gasket / wool pile for door vertical. | BI01010001010000000000000515BI0100001161 | 40 | M |
| 50 | 50 | Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge. (a) 200 mm long | BI01010001010000000000000515BI0100001162 | 10 | Each |
| 51 | 51 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white k) Movable door shutter.\nii)Shutter Door vertical. | BI01010001010000000000000515BI0100001163 | 20 | M |
| 52 | 52 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white k) Movable door shutter.ii) Shutter\nGlazing clip. | BI01010001010000000000000515BI0100001164 | 40 | M |
| 53 | 53 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground.\n(Payment will be made on the centre line measurements of\ntotal pipe line including all specials. No separate payment\nwill be made for accesories, specials. (b) For Concealed Work (i) CPVC Pipes Class-I,SDR-11 20 mm | BI01010001010000000000000515BI0100001165 | 80 | M |
| 54 | 54 | Supplying, fitting and fixing shower of approved brand and make. Chromium plated round shower with revolving joint 100 mm dia\nwith rubid cleaning system (Equivalent to Code No. 542(N) & Model -\nTropical / Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001166 | 3 | Each |
| 55 | 55 | Supplying, fitting and fixing shower of approved brand and make. (d) Chromium plated Hand shower with Flexible Tube &\nfittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No.\n5037 & Model - Florentine of Jaquar or similar).). | BI01010001010000000000000515BI0100001167 | 3 | Each |
| 56 | 56 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. | BI01010001010000000000000515BI0100001168 | 3 | Each |
| 57 | 57 | Wash basin vitreous china of approved make (without fittings)\nsupplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (ii) 550 mm X 400 mm size | BI01010001010000000000000515BI0100001169 | 3 | Each |
| 58 | 58 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) | BI01010001010000000000000515BI0100001170 | 3 | Each |
| 59 | 59 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 750 mm long | BI01010001010000000000000515BI0100001171 | 8 | Each |
| 60 | 60 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long | BI01010001010000000000000515BI0100001172 | 8 | Each |
| 61 | 61 | Supplying, fitting and fixing pillar cock of approved make. CP Centre hole Basin mixture with regular spout without popup\nwaste system with 450 mm long braided hoses. (Equivalent to Code No.\n5167(B) & Model - FLORENTINE of JAQUAR or similar brand). | BI01010001010000000000000515BI0100001173 | 3 | Each |
| 62 | 62 | Supplying, fitting and fixing pillar cock of approved make. CP Wall Mixture without spout but with provision for connnection to\nTelephone Shower and exposed pipe for Overhead shower (Equivalent to\nCode No. 5215 & Model - FLORENTINE of JAQUAR or similar brand). | BI01010001010000000000000515BI0100001174 | 3 | Each |
| 63 | 63 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 Double Socketed 3 Meter Length 110 mm | BI01010001010000000000000515BI0100001175 | 60 | M |
| 64 | 64 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (a) 75 mm | BI01010001010000000000000515BI0100001176 | 8 | M |
| 65 | 65 | Supplying, fitting and fixing PVC pipes for underground work of\napproved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes,\nmaking threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)\nPVC Pipes\n(Dia)\n20 mm | BI01010001010000000000000515BI0100001177 | 20 | M |
| 66 | 66 | PVC Pipes\n(Dia)\n50 mm | BI01010001010000000000000515BI0100001178 | 15 | M |
| 67 | 67 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'S' trap | BI01010001010000000000000515BI0100001179 | 3 | Each |
| 68 | 68 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. E.W.C. Plastic (hallow type) white | BI01010001010000000000000515BI0100001180 | 5 | Each |
| 69 | 69 | Supplying, fitting and fixing soap holder. PTMT(Prayag or equivalent) | BI01010001010000000000000515BI0100001181 | 10 | Each |
| 70 | 70 | Supplying, fitting and fixing towel rail with two brackets. C.P. over brass 25 mm dia. and 750 mm long | BI01010001010000000000000515BI0100001182 | 10 | Each |
| 71 | 71 | Supplying, fitting and fixing porcelain toilet paper holder of approved\nmake with wooden spindle as necessary. Roll type size 250 mm X 125 mm | BI01010001010000000000000515BI0100001183 | 5 | Each |
| 72 | 72 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm | BI01010001010000000000000515BI0100001184 | 6 | Each |
| 73 | 73 | Plain Floor Trap with Top tile & Strainer 75 mm | BI01010001010000000000000515BI0100001185 | 5 | Each |
| 74 | 74 | Supplying and laying true to line and level vitrified tiles of\napproved brand (size not less than 600 mm X 600 mm X 10\nmm thick) in floor, skirting etc. set in 20 mm sand cement\nmortar (1:4) and 2 mm thick cement slurry back side of tiles\nusing cement @ 2.91Kg./sqM or using polymerised adhesive\n(6 mm thick layer applied directly over finished artificial stone\nfloor/Mosaic etc without any backing course) laid after\napplication slurry using 1.75 Kg of cement per sqM below\nmortar only, joints grouted with admixture of white cement\nand colouring pigment to match with colour of tiles / epoxy\ngrout materials of approved make as directed and removal of\nwax coating of top surface of tiles with warm water and\npolishing the tiles using soft and dry cloth upto mirror finish\ncomplete including the cost of materials, labour and all other\nincidental charges complete true to the manufacturer's\nspecification and direction of Engineer-in-Charge. (White \ncement, synthetic adhesive and grout material to be supplied\nby the contracter)\n(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand\ncement mortar (1:4) & 2 mm thick cement slurry at back side\nof tiles, 0.2 kg/ Sq.m white cement for joint filling with\npigment\n(B) Light Colour | BI01010001010000000000000515BI0100001186 | 300 | SqM. |
| 75 | 75 | Supplying, fitting & fixing factory made solid panel foam PVC (density shall not be less than 600 kg/cum) door shutter consisting of 19 SWG thick M.S. tube of size 40mm X 20mm for styles and top, lock & bottom rail and welded together to form outer framework including a coat of approved make steel primer. M.S. frame shall be covered with 5mm thick heat moulded PVC channel to form 30mm X 100mm styles and 5mm thick PVC sheet on either side of panel to form 30mm X 125mm top, lock & bottom rail where 15mm (5mm X 3) thick and 20mm wide PVC sheet to be provide as gap insert for top & bottom rail. For panel 10mm PVC sheet to be fitted with stiles & rails with 30mm X 5mm PVC sheet beading on either side of panel and additional 30mm PVC beading as gap insert below top & bottom rail on either side of panel joined together using solvent cement adhesive. An additional 5mm thick and 20mm wide PVC strip to be stuck on the interior side of the PVC channel using using solvent cement adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In Ground floor.\n30mm thick single leaf shutter with 10mm thick panel. (b) Pre-laminated Colour. | BI01010001010000000000000515BI0100001187 | 10 | SqM. |
| 76 | 76 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. \n(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick\ncement slurry at back side of tiles using cement @ 2.91\nKg/Sq.m & joint filling using white cement slurry @\n0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative | BI01010001010000000000000515BI0100001188 | 100 | SqM. |
| 77 | 77 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls\nand floors to match with the existing work & 4 nos. of key\nstones (10mm) fixed with araldite at the back of each tile &\nfinishing the joints with white cement mixed with colouring\noxide if required to match the colour of tiles including\nroughening of concrete surface, if necessary or by synthetic\nadhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick\ncement slurry at back side of tiles using cement @ 2.91\nKg/Sq.m & joint filling using white cement slurry @\n0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative | BI01010001010000000000000515BI0100001189 | 30 | SqM. |
| 78 | 78 | Loading, unloading and stacking of scarp obtained from the renovation work of IB by manual means and transporting the same from IB to JHP Main Store | BI01010001010000000000000515BI0100001190 | 0.2 | MT |
| 79 | 79 | Supplying Aluminium casted body hydraulic door closer as per I.S.I. | BI01010001010000000000000515BI0100001191 | 5 | Each |
