Construction Of 15311 Numbers Four Stories Houses I E Units For Slum Dwellers Under Jawahar Lal Nehru National Urban Renewal Mission Jnnurm In Various Urban Estates Complete In All Respect As Per Scope Of Work Defined In Dnit On Turnkey Basis Including
Tender Value
2.55 Crore
Estimated cost
Bid Submission
06 Aug 2019
0 days left
EMD
5.11 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rewari → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 15311 Numbers Four Stories Houses I E Units For Slum Dwellers Under Jawahar Lal Nehru National Urban Renewal Mission Jnnurm In Various Urban Estates Complete In All Respect As Per Scope Of Work Defined In Dnit On Turnkey Basis Including
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | 17.93 (a) \nCivil Work \n\nFactory manufactured solid flush door shutters, with block board core as per I.S.No.1659- 1969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressesd, conforming to I.S.2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc.(excluding the cost of any fittings other than specified above, but including labour for fixing the same in position).\na) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges.)\niii) 35mm thick\n\n \n\n\n | BI01010001010000000000000515BI0100001113 | 1650 | per sqm |
| 2 | 2 | App.Item\nProviding and fixing of UPVC door of 30mm thick is white colour made of 50 x 5 x 2 mm wall thickness UPVC multi cavity suitable reinforced with C.I. and welded in corner, door shutters is white colour made of 31mm x 150mm x 1.5mm UPVC multi cavity section heavy tongued and grave jointing method and border having 35 x 35 x 2mm having multi cavity section suitable reinforced horizontally at three place by using 6mm polish bar and nail with door fitting complete in all respect of reputed firm, such as Neelkamal, syntax.\n(size 2’-6” x 6’-9”) \n\n \n\n\n | BI01010001010000000000000515BI0100001114 | 310 | each |
| 3 | 3 | 18.12\nWrought iron and mild steel, (using angles, flats, square bars, tees and channels) ladders, grills gratting frames, window guards, iron doors, openable or fixed stair case or parapet or any other type of railing gates and tree guards etc. including cost of screws and welding roads or bolts and nuts complete fixed in position.\n.\n \n\n\n | BI01010001010000000000000515BI0100001115 | 7 | per qtl |
| 4 | 4 | 17.83 \nProviding and fixing sliding bolt with nuts and screws, etc., complete\n(b) Aluminum\n(i) size 300 mm X 16 mm\n \n\n\n \n\n\n | BI01010001010000000000000515BI0100001116 | 370 | each |
| 5 | 5 | 17.24\nSupplying and fixing glass panes with deodar wood moulding\n(c) 4 mm thick (glazing area above 55 sq dm, but, upto 84 sq dm of each pane)\n \n\n\n | BI01010001010000000000000515BI0100001117 | 3600 | per sqm |
| 6 | 6 | App.Item\nProviding and fixing aluminum tower bolt 150mm size ISI Marked with Nuts and screws etc. complete in all respect. \n\n\n | BI01010001010000000000000515BI0100001118 | 740 | each |
| 7 | 7 | App.Item\nProviding and fixing aluminum handle 150mm size ISI Mark with nuts and screws etc. complete in all respect.\n\n\n\n | BI01010001010000000000000515BI0100001119 | 370 | each |
| 8 | 8 | 14.92\nProviding and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete.\n(a) Size of ceramic Glazed tiles 200 x 300mm. \n \n\n\n | BI01010001010000000000000515BI0100001120 | 3910 | per sqm |
| 9 | 9 | 14.90\nProviding and fixing of vitrified tiles of size 600 x 600mm of approved make in skirting / dado laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. \n(Note)\nTile shall be of premium quality (first quality) of required manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS.\n\n\n \n\n\n | BI01010001010000000000000515BI0100001121 | 614 | per sqm |
| 10 | 10 | 14.62\nKotah stone flooring 34 mm to 40 mm thick in any pattern as specified over 12 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing.\n\n\n \n\n\n | BI01010001010000000000000515BI0100001122 | 80 | per sqm |
| 11 | 11 | 14.66\nKotah stone 20 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc.\n\n\n \n\n\n | BI01010001010000000000000515BI0100001123 | 5 | per sqm |
| 12 | 12 | 15.6\n12mm thick cement plaster 1:5. \n\n\n | BI01010001010000000000000515BI0100001124 | 820 | per sqm |
| 13 | 13 | 16.2\nApplying pink primer or aluminum priming ocat on wood work including preparation of surface, Knotting and stopping etc.\n\n | BI01010001010000000000000515BI0100001125 | 1486 | per sqm |
| 14 | 14 | 16.3\nPainting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade\n \n\n\n | BI01010001010000000000000515BI0100001126 | 1486 | per sqm |
| 15 | 15 | 16.51\nPreparation of plastered surface for distempering including sand papering the surface, applying filling with approved quality filler, consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete.\n | BI01010001010000000000000515BI0100001127 | 35300 | per sqm |
| 16 | 16 | 16.54\nDistempering with dry distemper (of approved manufacture) two coats over one priming coat on new work.\n \n\n\n | BI01010001010000000000000515BI0100001128 | 35300 | per sqm |
| 17 | 17 | 16.61\nFinishing walls with exterior decorative cement based paints such as snowcem, Robbiacem etc. on new work, two coats to give an even shade.\n \n\n\n | BI01010001010000000000000515BI0100001129 | 89760 | per sqm |
| 18 | 18 | 16.18\nPainting two coats with ready- mixed paint for metallic surfaces in all shades on old steel or iron work.\n \n\n\n | BI01010001010000000000000515BI0100001130 | 5000 | per sqm |
| 19 | 19 | 6.26\nClearing jungle including uprooting of rank vegetation, grass brush wood, trees and saplings of girth upto 30cm measured at a height of 1 meter above ground\n \n\n\n | BI01010001010000000000000515BI0100001131 | 10120 | per 100 sqm |
| 20 | 20 | App.Item\nProviding and fixing pressed steel door shutters having size 9’ x 9’ including door frame for pump room and security room confirming to IS : 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25mm, or base ties of 1.60mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges, sliding bolts etc. 2.5mmm thick with mortar guards, lock strike – plate and shock abosorbers as specified and M.S. door frame witth angle 75m x 50 x 8 mm applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-In-Charge.\n \n\n\n | BI01010001010000000000000515BI0100001132 | 16 | per sqm |
| 21 | 21 | 14.96\nLaying and fixing Granite stone in all shades 15mm to 18mm tthick in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jonted with white cement slurry mixed with pigment to match the shade of granite stone. (Excluding the cost of granite stone).\n \n\n\n | BI01010001010000000000000515BI0100001133 | 540 | per sqm |
| 22 | 22 | App.Item\nExtra for granite (mirror) polishing over existing terrazzo flooring, skirting and dado instead of ordinary polish to give high glass finish complete in all respect including cost of machine operation, electric charges and granite blocks / batti and other required material and labour etc. All types of cost / expenditure is including and nothing extra shall be paid. \n \n\n\n | BI01010001010000000000000515BI0100001134 | 9800 | per sqm |
| 23 | 23 | 17.90\nFactory manufactured paneled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc.,(non-coniferous timber other than teak, conforming to I.S. specification No.1003,kiln-seasoned),with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete, fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position).\n(a) 30mm thick.\n\n \n\n\n | BI01010001010000000000000515BI0100001135 | 306 | per sqm |
| 24 | 24 | 10.28\nCement Concrete 1:8:16 with stone aggregate 40mm nominal size in foundation and plinth.\n \n\n\n | BI01010001010000000000000515BI0100001136 | 195 | per cum |
| 25 | 25 | 9.13 + note\nShuttering for faces of concrete foundations and foundation beams \n(i) (vertical or battering)\n\n \n\n\n | BI01010001010000000000000515BI0100001137 | 114 | per sqm |
| 26 | 26 | 10.42\nCement Concrete 1: 1 ½: 3 with stone aggregate 20mm nominal size in foundation and plinth.\n \n\n\n | BI01010001010000000000000515BI0100001138 | 195 | per cum |
| 27 | 27 | 24.35\nProviding and fixing premoulded bituminous joint filler, for expansion joints, including the cost of sealing compound and primer coat-\n(i) 12mm wide.\n\n \n\n\n | BI01010001010000000000000515BI0100001139 | 760 | per mtr. |
| 28 | 28 | App.Item\nProviding and fixing of drain cover fixing size 600mm x 900mm x 100mm fabricated with steel bras 10mm dia size and C.C. 1:1½:3 including cost of lifting and placing in position. The steel bars shall be provided at 100mm C/C both sides in a single layer complete in all respect upto entire satisfaction of Engineer-In-Charge. \n \n\n\n | BI01010001010000000000000515BI0100001140 | 1000 | each |
| 29 | 29 | App.Item\nProviding rain water harvesting system with boring, lowering, PVC pipe 200mm i/d ISI Mark 10 Kg. Per centimeter sqr. Pressure lowering upto 100mntr. Depth including cost of blind pipe / stainer pipe and brick masonry chamber and other media as per standard drg. attached.\n \n\n\n | BI01010001010000000000000515BI0100001141 | 1 | each |
| 30 | 30 | 30.41\nSanitary Work\n\nPROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (ORDINARY) LAVATORY SUITES consisting of Lavatory in VITREOUS CHINAWARE size as give below ( to the approval of the Engineer-in-charge) including china plug for tap hole where necessary ; R.S. or C.I.BRACKETS for building into wall including painting; 32mm C.P.BRASS WASTE WITH C.P. brass chain and rubber plug; 15mm C.P.BRASS SCREW DOWN PILLAR TAP WITH jam nuts or couplings best design (as approved by the Engineer-in-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS, FLOORS AND PAINTING OF FITTINGS ETC.\n(iv) Size 550mm x 400mm with one no. tap.\n\n \n\n\n | BI01010001010000000000000515BI0100001142 | 162 | each |
| 31 | 31 | App.Item\nProviding and fixing of white vitreous china water closet squatting pan having size 580mm in white colour Best Indian Make Orissa type including cost of loading, unloading, carriage and fixing at site complete in all respect upto entire satisfaction of Engineer-In-Charge. The make of water closet shall be of company parryware, Hindware/CERA.\n \n\n\n | BI01010001010000000000000515BI0100001143 | 100 | each |
| 32 | 32 | App.Item\nProviding and fixing P.V.C. Low level flushing cistern having 10 Lt. Water Storage Capacity, with manually controlled device (handle lever) conforming to IS : 7231 with fixtures G.I. Pipe 600mm Long and 32mm dia including cost of loading, unloading, carriage and fixing at site complete in all respect upto entire satisfaction of Engineer-In-Charge. The make of water closet shall be of company parryware, Hindware/CERA.\n10 Ltr. Capacity White.\n\n \n\n\n | BI01010001010000000000000515BI0100001144 | 300 | each |
| 33 | 33 | App.Item\nProviding and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including cost of loading, unloading, carriage and fixing at site complete in all respect upto entire satisfaction of Engineer-In-Charge.\n40mm dia size.\n\n \n\n\n | BI01010001010000000000000515BI0100001145 | 816 | each |
| 34 | 34 | 13.89\nProviding & fixing PVC Rain Water pipe 6 Kg. Pressure of ISI Mark in cement mortar during masonry work.\n(a) 100mmm dia PVC pipe 6 Kg. Pressure.\n\n \n\n\n | BI01010001010000000000000515BI0100001146 | 2500 | per mtr. |
| 35 | 35 | 13.90 \nProviding and fixing PVC Bend ISI Mark.\n(a) 100mm dia PVC Bend\n\n \n\n\n | BI01010001010000000000000515BI0100001147 | 400 | each |
| 36 | 36 | App.Item\nProviding & fixing PVC Rain Water pipe 6 Kg. Pressure of ISI Mark.\n75mm dia \n\n \n\n\n | BI01010001010000000000000515BI0100001148 | 500 | per mtr. |
| 37 | 37 | App.Item\nProviding and fixing of PVC Tee & Bend ISI Marked.\n(i) Bend (75mm dia)\n\n \n\n\n | BI01010001010000000000000515BI0100001149 | 100 | each |
| 38 | 37.1 | (ii) Tee (100 x 100 x 100mm) | BI01010001010000000000000515BI0100001150 | 50 | each |
| 39 | 37.2 | (iii) Tee (100 x 100 x 75mm) | BI01010001010000000000000515BI0100001151 | 50 | each |
| 40 | 38 | App.Item\nProviding and fixing of G.I. pipe (Class – B) including cost of loading, unloading, carriage and fixing at site complete in all respect upto entire satisfaction of Engineer-In-Charge. The make of G.I. pipe shall be TATA Company / Jindal Company.\n(a) 25mm dia.\n\n \n\n\n | BI01010001010000000000000515BI0100001152 | 80 | per mtr. |
| 41 | 38.1 | 20mm dia. | BI01010001010000000000000515BI0100001153 | 700 | per mtr. |
| 42 | 38.2 | 15mm dia | BI01010001010000000000000515BI0100001154 | 200 | per mtr. |
| 43 | 39 | App.Item\nMakilng connection of G.I. pipe with main line G.I. / D.I. including cost of tee, bend, other specials, cutting, jointing, threading, safeda etc. complete in all respect upto entire satisfaction of Engineer-In-Charge.\n(a) 25 to 40mm nominal bore.\n \n\n\n | BI01010001010000000000000515BI0100001155 | 408 | each |
| 44 | 39.1 | (b) 50 to 80mm nominal bore. | BI01010001010000000000000515BI0100001156 | 10 | each |
| 45 | 40 | 30.106\nPAINTING G.I. PIPES AND SPECIALS WITH 1ST AND 2ND QUALITY SYNTHETIC ENAMEL PAINT IN ALL SHADES ON EXISTING OR NEW WORK, TWO COATS PAINTS INCLUSING CLEANING, RUBBING SURFACE, ETC. \n(a) 15 mm and 20 mm i/d of pipes and specials (with first quality)\n\n \n\n\n | BI01010001010000000000000515BI0100001157 | 900 | per 10 mtr |
| 46 | 40.1 | (b) 25 mm and 32 mm i/d of pipes and specials (with first quality) | BI01010001010000000000000515BI0100001158 | 80 | per 10 mtr |
| 47 | 41 | App.Item\nProviding and fixing G.I. Union (ISI Marked) in G.I. pipe including cutting and threading the pipe and making long screws etc. complete in all respect.\n15mm nominal bore.\n\n \n\n\n | BI01010001010000000000000515BI0100001159 | 816 | each |
| 48 | 41.1 | 20mm nominal bore. | BI01010001010000000000000515BI0100001160 | 20 | each |
| 49 | 41.2 | 25mm nominal bore. | BI01010001010000000000000515BI0100001161 | 20 | each |
| 50 | 42 | 30.119\nProviding and fixing HDEP Water Storage Tanks of Sintex, Diplast, O.K. Supreme make with covers / lids marked with IS : 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour pprovisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-In-Charge. (Except Civil work). \n(iii) 500 Ltr. Capacity.\n\n \n\n\n | BI01010001010000000000000515BI0100001162 | 408 | each |
| 51 | 42.1 | (ix) 5000 Ltr. Capacity. | BI01010001010000000000000515BI0100001163 | 17 | each |
| 52 | 43 | 30.75\nProviding and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge).\n(a) Bib cock long body\n\n \n\n\n | BI01010001010000000000000515BI0100001164 | 1224 | each |
| 53 | 43.1 | big cock | BI01010001010000000000000515BI0100001165 | 408 | each |
| 54 | 44 | 30.76\nProviding and fixing in position C.P. brass stop cocks (as approved by the Engineer-in-charge)\n(a) 15 MM STOP COCK\n(ii) Concealed stop cock with flange\n\n \n\n\n | BI01010001010000000000000515BI0100001166 | 408 | each |
| 55 | 45 | 30.45\nProviding and fixing in position best Indian make chromium plated brass 2nd tap for lavatory.\n \n\n\n | BI01010001010000000000000515BI0100001167 | 408 | each |
| 56 | 46 | 30.71\nPROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P.\n(a) Indian Make 600mm x 450mm\n\n \n\n\n | BI01010001010000000000000515BI0100001168 | 408 | each |
| 57 | 47 | 30.82\nProviding and fixing in position best Indian make flexible tube connection.\n(b) CP brass.\n(iii) 15mm x 450mm. \n\n \n\n\n | BI01010001010000000000000515BI0100001169 | 816 | each |
| 58 | 48 | App.Item\nProviding and fixing of S.F.R.C. Manhole covers & frames suitable for inspection chambers 600mm x 45mm (ISI Mark satisfaction of Engineer – In – Charge.\n\n\n | BI01010001010000000000000515BI0100001170 | 15 | each |
| 59 | 49 | App.Item\nProviding and fixing C.P. brass angle valve for basin mixer and greyser points of approved quality conforming to IS : 8931 complete in all respect.\n(i) 15mm nominal bore.\n\n \n\n\n | BI01010001010000000000000515BI0100001171 | 816 | each |
| 60 | 50 | App.Item\nProviding and fixing opening jali / grating on floor trape approved quality and colour.\n(a) Circular type\n(i) 100mm nominal dia.\n\n\n | BI01010001010000000000000515BI0100001172 | 816 | each |
| 61 | 51 | 30.110\nPROVIDING AND FIXING IN POSITION AUTOMATIC BRASS BALL VALVES IN TANKS.\n(b) with plastic ball\n(ii) 20mm internal dia.\n\n\n | BI01010001010000000000000515BI0100001173 | 426 | each |
| 62 | 52 | App.Item\nProviding and fixing C.P. brass extension nipple for water tank pipe, fittings of approved quality and colour.\n(i) 15mm nominal bore.\n\n\n | BI01010001010000000000000515BI0100001174 | 100 | each |
| 63 | 52.1 | (ii) 20mm nominal bore.\n\n | BI01010001010000000000000515BI0100001175 | 816 | each |
| 64 | 53 | 29.84\nCONSTRUCTION BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation cement concrete 1:2:4 BENCHING 12mm THICK CEMENT PLASTER 1:2 with a floating coat of 1mm thick o neat cement R.C.C.1:2:4 SLAB 100mm THICK /C.C.TOPPING 50 mm THICK WITH 455 MMx455MM/455MMx610MM INSIDE LIGHT DUTY C.I.INSPECTION CHAMBER COVER AND FRAME weight as per I.S.I. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design.\n(a) Size 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping)\n\n\n | BI01010001010000000000000515BI0100001176 | 51 | each |
| 65 | 54 | 30.59\nProviding and fixing in position best quality stainless steel sink of 600mm x 450mm x 200mm.\n\n | BI01010001010000000000000515BI0100001177 | 340 | each |
| 66 | 55 | App.Item\nFire Fighting\nProviding and fixing of 5 BHP for induction motor with capacity 350 LPM and head 45mtr. of make crompton / kirloskar including necessary suitable size cable 6 sqmm of required length and panel board with necessary components like Starter, Board, Grip, Volt Meter and Amp. Meter suitable for 5 HP pump complete in all respect, testing and making connection.\n\n\n | BI01010001010000000000000515BI0100001178 | 5 | each |
| 67 | 56 | App.Item\nProviding and fixing of synthetic pyroprotect falax canvas fire (hosereel) type B ISI mark including testing complete in all respect to the satisfaction of Engineer-In-Charge.\n\n | BI01010001010000000000000515BI0100001179 | 340 | per mtr. |
| 68 | 57 | App.Item\nProviding and fixing of 100mm i/d dual plate NRV ISI mark suitable for firefighting system to the satisfaction of Engineer-In-Charge.\n\n | BI01010001010000000000000515BI0100001180 | 17 | each |
| 69 | 58 | App.Item\nProviding and fixing of MS Butter ffly wall suitable fire fighting system 100mm i/d ISI mark including testing to the satisfaction of Engineer-In-Charge.\n | BI01010001010000000000000515BI0100001181 | 68 | each |
| 70 | 59 | App.Item\nProviding and fixing of MS Forged ball walls suitable fire fighting system 25mm i/d ISI mark including testing to the satisfaction of Engineer-In-Charge \n\n | BI01010001010000000000000515BI0100001182 | 68 | each |
| 71 | 60 | 31.38\nInternal Electric Work\n\nWiring only in 1.5 sqmm PVC insulated copper conductor cable in existing conduit pipe and MS boxes covered with 5mm thick bakelite sheet including cost of switch, ceiling rose etc.\n\n(I)Fan Point\n(b)Medium Point\n\n\n | BI01010001010000000000000515BI0100001183 | 300 | each |
| 72 | 60.1 | (c) long point | BI01010001010000000000000515BI0100001184 | 200 | each |
| 73 | 60.2 | (II) light point (a) short point | BI01010001010000000000000515BI0100001185 | 500 | each |
| 74 | 60.3 | (b) medium point | BI01010001010000000000000515BI0100001186 | 200 | each |
| 75 | 60.4 | (c) long point | BI01010001010000000000000515BI0100001187 | 300 | each |
| 76 | 60.5 | (vi) call bell point (a) short point | BI01010001010000000000000515BI0100001188 | 150 | each |
| 77 | 60.6 | (vii) 3 Pin 5 Amp. Plug Point including earthling the 3rd Pin etc. (c) (long point) | BI01010001010000000000000515BI0100001189 | 408 | each |
| 78 | 60.7 | (viii) 3 Pin 15 Amp. Pipe point with 4 Sqmm PVC insulated copper conductor cable including earthling the 3rd Pin etc.\n(a) Short Point\n | BI01010001010000000000000515BI0100001190 | 100 | each |
| 79 | 60.8 | (c) long point | BI01010001010000000000000515BI0100001191 | 308 | each |
| 80 | 61 | 31.40\nSupply and erection of PVC unsheathed copper conductor cable single core 1100 Volts grade in pipe of suitable size excluding cost and erection of pipe.\n(i) Cable size 1.5 Sqmm (3/0.81 mmm)\n\n\n | BI01010001010000000000000515BI0100001192 | 3000 | per mtr. |
| 81 | 61.1 | (ii) Cable size 2.5 Sqmm (3/1.05 mmm) | BI01010001010000000000000515BI0100001193 | 6000 | per mtr. |
| 82 | 61.2 | (iii) Cable size 4 Sqmm (7/0.85 mmm) | BI01010001010000000000000515BI0100001194 | 1000 | per mtr. |
| 83 | 61.3 | (iv) Cable size 6 Sqmm (7/1.05 mmm) | BI01010001010000000000000515BI0100001195 | 1600 | per mtr. |
| 84 | 62 | 31.12\nSupply and erection of sheet steel enclosures Distribution boards suitable for MCBs etc. on wall / existing board / pedestal with rag bolts including bonding to earth :-\n(vi) Distribution board 8 way.\n\n\n | BI01010001010000000000000515BI0100001196 | 200 | each |
| 85 | 63 | App.Item\nComplete E.I. work on turkey basis i.e. wiring with complete copper conductor cable including conduit pipe, switch and socket main/sub main complete as per designed and drawing of approved DNIT for dwelling unit\n(rate = 3% of the total cost of construction of dwelling units i.e. 0.03 x 3,47,000.00 = Rs. 10410/-).\n\n\n | BI01010001010000000000000515BI0100001197 | 408 | each |
| 86 | 64 | App.Item\nPdg. external electrical infrastructure on turukey basis i.e. T/F’s for electric supply, 11 KV ABC, LT ABC, LT cable to MCB box MCB box for meter installation and connection common supply cable for street lighting fire pump electric supply to water pump as per DNIT for dwelling unit 17 block of 24 dwelling unit each as per design and drawing of the DNIT.\n(rate = 1% of the total cost of construction of dwelling units i.e. 0.01x347000/- = 3470/- each)\n \n\n | BI01010001010000000000000515BI0100001198 | 408 | each |
| 87 | 65 | App.Item\nPdg. and fixing 10 HP motor pump set of approved make including panel board wiring with complete copper conduit cable including conduit pipe switch and socket and gate valve, change over complete in all respect for boosting station as per satisfaction of Engineer-in-charge.\n\n | BI01010001010000000000000515BI0100001199 | 1 | each |
AI Tender Summary
Tender Timeline
Jul 29, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 08, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender