Additional Works In Assam Business Incubation Centre ( Assam Startup The Nest ) At Ambari Guwahati ( Civil And Interior Part )
Tender Value
1.96 Crore
Estimated cost
Bid Submission
07 Aug 2019
0 days left
EMD
3.93 Lakhs
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambari Guwahati → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Additional Works In Assam Business Incubation Centre ( Assam Startup The Nest ) At Ambari Guwahati ( Civil And Interior Part )
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | Elevation of the proposed Incubation Centre: Steel work riveted and/ or bolted/ riveted in built up sections, frame work including cutting, hoisting, fixing in position and applying a priming coat of red- lead paint up to 4.6m height above plinth including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. \nb) In single stanchions (columns) composed of R.S.J. or channels with caps, bases, splices, angle brackets etc. \n | item1 | 15 | qtl |
| 2 | 2 | Providing, fabrication and fixing of structural glazing made out of Anodised aluminium mother frame 6 nos 1.2m each @ 1.819 Kg/m and subframe of 16 nos 0.60 m each @ 0.31 Kg/m of Jindal or equivalent and 5 mm reflective glass of approved shade. The glass to be pasted using structural silicon (DC 995) and weatherseal silicon to be used (DC 789), the structure complete with all accessories as and where necessary. | item2 | 500 | sqm |
| 3 | 3 | Interior Works of Ground Floor: Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.\n(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.\n | item3 | 50 | cum |
| 4 | 4 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.\n(a) Brick on flat soling.\n | item4 | 122.5 | sqm |
| 5 | 5 | Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels. | item5 | 85.5 | sqm |
| 6 | 6 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).\n(a) In prop 1cement: 3 sand :6 coarse aggregate by volume\n | item6 | 8 | cum |
| 7 | 7 | Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). \n(iii) Deluxe Quality\n(i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)\n | item7 | 150 | sqm |
| 8 | 8 | Kota-stone slab flooring of 18 mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (1) 550mm x 550mm | item8 | 40 | sqm |
| 9 | 9 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.\n(I) In Sub-structure upto plinth level including dewatering if necessary\n(b) In proportion 1:4.\n | item9 | 20 | cum |
| 10 | 10 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall\n(a) In cement mortar in proportion 1:4 (1 cement:4 sand)\n | item10 | 73.5 | Rm |
| 11 | 11 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \nA) On rough side\nb) In cement mortar 1:4\n | item11 | 220 | sqm |
| 12 | 12 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side\nb) In cement mortar 1:4\n | item12 | 75 | sqm |
| 13 | 13 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc. as required complete as specified and directed for all levels. (b) 3 Track sliding window (iv) 5 mm clear glass | item13 | 2.2 | sqm |
| 14 | 14 | Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (iv) Prelaminated Board | item14 | 5 | sqm |
| 15 | 15 | Supplying, fitting and fixing of Automatic sliding door and operator, modular design including internal cover with operator dimensions (H X T) not exceeding 120mm x 175mm and of length required to suit the opening size given below: Clear opening of size 2400mm X 2400mm: compact linear sliding door automatic, with self cleaning rollers, TUV type tested as per DIN 18650.The Automatic sliding door consists of 16 bit Microprocessor Control unit, monitoring of closing force, automatic reverse on contact with obstruction, operator commissioning without any additional instrumentation and self-teaching. Operating Modes: Continuous open, automatic operation, closing time, night lock, multi-sensor detector(radar motion detector with direction detecion and self-monitoring, double 3D safeguard light curtain (light barrier) for convenient safeguarding of the opening width) with Electro magnetic locking, integrated in the drive unit, with manual emergency unlocking of GODREJ/GEZE make.The operator will be provided with short circuit proof power supply unit 220 / 240 V, 50 / 60 hz . (d) door Automatic ST20 D\n | item15 | 1 | each |
| 16 | 16 | Providing, fitting and fixing anodized aluminuim framed glazed doors with anodized aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete etc complete as specified and directed by the department at all levels.\n(a) with 12 mm thick toughened glass \n | item16 | 42 | sqm |
| 17 | 17 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. | item17 | 150 | sqm |
| 18 | 18 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or-screws. (I)-Plain-grill. (c) Fixed to Brickwork/P.C.C/R.C.C. | item18 | 32 | kg |
| 19 | 19 | Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item19 | 93 | sqm |
| 20 | 20 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.\n(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)\n | item20 | 93 | sqm |
| 21 | 21 | Extra over item no 13.4.7 above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).\n(i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) Another two coats\n | item21 | 500 | sqm |
| 22 | 22 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | item22 | 50 | sqm |
| 23 | 23 | Extra over item no.13.5.2 above for every subsequent coat of acrylic emulsion exterior coatings of Unicem 'Rakshak' brand of required shade. | item23 | 500 | sqm |
| 24 | 24 | Furniture & Interior works: Supplying and fixing high density artificial grass as per disign horizontally and vertically fixed firmly to walls/floors/RCC roof etc. as directed and specified.\n | item24 | 67 | sqm |
| 25 | 25 | Supplying of twin two seater highquality leatherite sofa | item25 | 2 | each |
| 26 | 26 | Supply of singleSeater highquality leatherite sofa | item26 | 2 | each |
| 27 | 27 | Providing and making round stool 400 mm diameter with latherite material as per design and as specified. | item27 | 1 | each |
| 28 | 28 | Providing and making centre table of size 600X750 mm made out of 19 mm ply with 1 mm thk. Laminate finish and 10 mm thk. Glass top as per design with latherite finished as per design | item28 | 1 | each |
| 29 | 29 | Providing and making round stool 600 mm diameter square with latherite material as per design and as specified. | item29 | 2 | each |
| 30 | 30 | Providing and making centre Table of size 600 x 600 mm made out of 19 mm ply with 1mm thk, laminate finish and 10mm thk glass top as per design | item30 | 1 | each |
| 31 | 31 | Supply and making of Recption Table of 1050 (Ht) with customer ledge top of size 300(W) x 1800 (L)x 1050 mm made out of 19mm ply (Fiden, Green-marine) on all vertical, horizontal, side and front panels. The main working desk of Reception table will be 1600 x 600 x 750 mm including one lines of including two set of drawer of size 125 x 425x 400 mm and one filing drawer with 12 mm th. ply of size 400 mm as per design. The table will include one metallic key board tray along with a wire manager slot. The Table will include customer ledge and front and side fascia which shall be finished with 12 mm thk, solid surface corian (Merino-Hanex). Rest of the exposed surface of the table will be PU finished as per instruction. All inside surface shall be in enamel paint finish. The cost of the entire table should include Foot rest, all hardare and fittings (Hettich or equivalent) including S.S finesed 75 mm Handles, self closing hinges, wire managers, spring loaded shutters drawer slides Locks, tower bolts, key boards etc. complete in all respect. | item31 | 1 | each |
| 32 | 32 | Supplying and making of decorative piece made out of LED light fixed on PVC sheet as per design and as directed. | item32 | 1 | job |
| 33 | 33 | Supplying and fixing 3M viny/frosted/sparkle etching film on all clear glasses as per design/line and shape and as instructed by Architect. | item33 | 15 | sqm |
| 34 | 34 | Supplying and instalation of metallic/vinyl Led Logo as per required size and instruction. | item34 | 5 | each |
| 35 | 35 | Supplying of Medium back chair for reception with fabric upholsetry with slef design, centre tilt mechanism with single locking system gas lift with nylon base. Armest made of out virgin materail of PP. Make Godrej (Ell series) or eqivalent. | item35 | 1 | each |
| 36 | 36 | Providing making and fixing (450 mm deep) low height Cabinet of height 750 mm finished with 1mm thk Laminate on all exposed suface (Century, signature, Elvee) and made out of 19mm ply (Fiden, green-marine, century) at top, bottom, sides, horizontal & vertical partition including shutters etc. The cabinet will have 6 mm ply backing with all inside surface in enamel paint finish Rate to include cost towards fixing of stainless steet hinges, tower bolts, locks etc. | item36 | 12 | sqm |
| 37 | 37 | Providing and fixing white lacquered glass/marker board on existing Laminate finished surface. | item37 | 2 | sqm |
| 38 | 38 | Electricalworks: Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.\n(i) With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. \n | item38 | 45 | mtr |
| 39 | 39 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. (ii) With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item39 | 30 | mtr |
| 40 | 40 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. (iii) With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item40 | 20 | mtr |
| 41 | 41 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. (iv) With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item41 | 15 | mtr |
| 42 | 42 | Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolorkany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolorkany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan. | item42 | 8 | each |
| 43 | 43 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. (i) Short point up to 3.00 metre. length. | item43 | 6 | each |
| 44 | 44 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. (ii) Medium point up to 6.00 metre. Length. | item44 | 4 | each |
| 45 | 45 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. (iii) Long point up to 10.00 metre. Length. | item45 | 2 | each |
| 46 | 46 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) (i) Short point up to 3.00 metre. length. | item46 | 4 | each |
| 47 | 47 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.). (ii) Medium point up to 6.00 metre. Length. | item47 | 3 | each |
| 48 | 48 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) (iii) Long point up to 10.00 metre. Length. | item48 | 2 | each |
| 49 | 49 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete. (iii) Long point up to 10.00 metre. Length. | item49 | 36 | each |
| 50 | 50 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. (i) 4-5 module type Metal | item50 | 6 | each |
| 51 | 51 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. (ii) 6 module | item51 | 3 | each |
| 52 | 52 | Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department. | item52 | 12 | each |
| 53 | 53 | Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item53 | 4 | each |
| 54 | 54 | Supplying including installation of socket outlet 6 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item54 | 1 | each |
| 55 | 55 | Supplying including fitting and fixing of TV co-axial outlet MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells complete as per direction of department. | item55 | 1 | each |
| 56 | 56 | Supply and fixing 19 mm dia 2.00 mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required: | item56 | 30 | mtr |
| 57 | 57 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C. Series (Schneider MG, legrand, Hager, crabtree Xpro make) (i) 6 to 32A | item57 | 4 | each |
| 58 | 58 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C. Series (Schneider MG, legrand, Hager, crabtree Xpro make) (ii) 40 A | item58 | 2 | each |
| 59 | 59 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C. Series (Schneider MG, legrand, Hager, crabtree Xpro make) (i) 6 to 32A | item59 | 2 | each |
| 60 | 60 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C. Series (Schneider MG, legrand, Hager, crabtree Xpro make) (ii) 40A | item60 | 2 | each |
| 61 | 61 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300 M A sensitivity DP RCCB. (Schneider MG, legrand, Hager, crabtree Xpro make). (i) 25A | item61 | 2 | each |
| 62 | 62 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300 M A sensitivity DP RCCB. (Schneider MG, legrand, Hager, crabtree Xpro make) (ii) 40A | item62 | 2 | each |
| 63 | 63 | LED Light: Supplying with fitting and fixing of surface & wall mounted lumineries complete with all accessories including driver directly on wall /ceiling including connection with 1.5 sq. mm PVC insulated SC copper conductor as required and as directed by the Deptt. Phillips model LED batten BN 550 WELD 6 3000x6500K or equivalent as approved by the Deptt. | item63 | 18 | each |
| 64 | 64 | Supplying, installation, testing and Commission of the following indoor Decorative recessed typed mirror optics down lighter luminaries complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department. 15W, BBS 170 1 X DLED 5000 PSU-WH Phillip make GREEN LED recessed mounted down lighter with latest LED technology. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent WIPRO/ JAQUAR make).\n\n\n | item64 | 8 | each |
| 65 | 65 | Supplying with installation, testing and commissioning of 3 STAR rating tower air conditioner of the following capacity complete with all accessories as directed by the department. 4.00 T capacity, Hier /LG/ Daiken/ Voltas / Bluestar make | item65 | 5 | each |
| 66 | 66 | Providing and erection of vertical garden as per design and as specified | item66 | 1 | job |
| 67 | 67 | Providing artifiial water falls as approved and as per design | item67 | 1 | job |
| 68 | 68 | Supplying with fitting and fixing Air Curtain of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (Crompton Greaves/Vee-Dee make) six feet | item68 | 1 | each |
| 69 | 69 | Interior Works of First floor of Incubation Centre (Assam Startup – The Nest): Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately. (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | item69 | 15 | cum |
| 70 | 70 | Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). \n(iii) Deluxe Quality\n(i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)\n | item70 | 241 | sqm |
| 71 | 71 | Dismantling of kota stone flooring | item71 | 225 | sqm |
| 72 | 72 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.\n(II) In Super structure\n(b) In proportion 1:4.\n | item72 | 0.6 | cum |
| 73 | 73 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level.\n(A) 112mm thick brick wall\n(a) In cement mortar in proportion 1:4 (1 cement : 4 sand) | item73 | 15 | sqm |
| 74 | 74 | Steel work riveted and/ or bolted/ riveted in built up sections, frame work including cutting, hoisting, fixing in position and applying a priming coat of red- lead paint up to 4.6m height above plinth including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. \nb) In single stanchions (columns) composed of R.S.J. or channels with caps, bases, splices, angle brackets etc. \n | item74 | 10 | qtl |
| 75 | 75 | Providing,fitting and fixing wooden flooring from Uniproducts (India) Ltd.of thickness 14mm made of pure wood(Engineered Wood) of different types with a top layer of 3mm thick hard wood and Under layer of 2mm thickness made of polythene and foamsheet laid on existing concrete floor complete as directed and specified | item75 | 15 | sqm |
| 76 | 76 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (A) On rough side. (b) In cement mortar 1:4\n | item76 | 35 | sqm |
| 77 | 77 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (B) On fair side. (b) In cement mortar 1:4\n | item77 | 20 | sqm |
| 78 | 78 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. | item78 | 50 | sqm |
| 79 | 79 | Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item79 | 20 | sqm |
| 80 | 80 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.\n(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)\n | item80 | 20 | sqm |
| 81 | 81 | Extra over item no 13.4.7 above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).\n(i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)\n | item81 | 1000 | sqm |
| 82 | 82 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | item82 | 35 | sqm |
| 83 | 83 | Extra over item no.13.5.2 above for every subsequent coat of acrylic emulsion exterior coatings of Unicem 'Rakshak' brand of required shade. | item83 | 2500 | sqm |
| 84 | 84 | Providing and fixing Stainless Steel (Grade 304) railing made of hollow tubes, channels, plates, etc. including welding, grinding, buffing, polishing & making curvature (where required) and fitting the same with Stainless Steel nuts & bolts complete i.e. fixing the railing with necessary accessories & Stainless Steel dash fasteners, Stainless Steel bolts, etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment, only weight of Stainless Steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners, etc. will be considered). | item84 | 230 | kg |
| 85 | 85 | Providing, fitting and fixing anodized aluminuim framed glazed doors with anodized aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete etc complete as specified and directed by the department at all levels.\n(a) with 12 mm thick toughened glass (toughened glass door, full glass partition, glass on railing) \n | item85 | 250 | sqm |
| 86 | 86 | Furniture & Interior works: Supplying and installation of metallic/vinyl Led Logo as per required size and instruction. | item86 | 6 | each |
| 87 | 87 | Electricalworks: Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. | item87 | 60 | mtr |
| 88 | 88 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item88 | 45 | mtr |
| 89 | 89 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item89 | 30 | mtr |
| 90 | 90 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item90 | 20 | mtr |
| 91 | 91 | Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolorkany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolorkany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan. | item91 | 8 | each |
| 92 | 92 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. (i) Short point up to 3.00 metre. length. | item92 | 5 | each |
| 93 | 93 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. (ii) Medium point up to 6.00 metre. Length. | item93 | 4 | each |
| 94 | 94 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. (ii) Long point up to 10.00 metre. Length. | item94 | 6 | each |
| 95 | 95 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by theDeptt.). (i) Short point up to 3.00 metre. length. | item95 | 5 | each |
| 96 | 96 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by theDeptt.) (ii) Medium point up to 6.00 metre. Length. | item96 | 6 | each |
| 97 | 97 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by theDeptt.) (iii) Long point up to 10.00 metre. Length. | item97 | 8 | each |
| 98 | 98 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete. (i) Short point up to 3.00 metre. length. | item98 | 5 | each |
| 99 | 99 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete. (ii) Medium point up to 6.00 metre. Length. | item99 | 12 | each |
| 100 | 100 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete. (iii) Long point up to 10.00 metre. Length. | item100 | 6 | each |
| 101 | 101 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. (i) 4-5 module type Metal | item101 | 4 | each |
| 102 | 102 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. (ii) 6-8 module type Metal | item102 | 4 | each |
| 103 | 103 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. (iii) 10 module type Metal | item103 | 2 | each |
| 104 | 104 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. (iv) 12-16 module type Metal | item104 | 2 | each |
| 105 | 105 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. (i) 6 module | item105 | 2 | each |
| 106 | 106 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. (ii) 8 module | item106 | 2 | each |
| 107 | 107 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. (iii) 10 module | item107 | 2 | each |
| 108 | 108 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. (iv) 16 module | item108 | 1 | each |
| 109 | 109 | Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department. | item109 | 8 | each |
| 110 | 110 | Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item110 | 12 | each |
| 111 | 111 | Supplying including installation of socket outlet 6 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item111 | 4 | each |
| 112 | 112 | Supplying including fitting and fixing of TV co-axial outlet MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells complete as per direction of department. | item112 | 1 | each |
| 113 | 113 | Supplying including fitting and fixing of TV co-axial outlet MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells complete as per direction of department. | item113 | 300 | mtr |
| 114 | 114 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by thedeptt. C Series (Schneider MG, legrand, Hager, crabtree Xpro make) (i) 6 to 32A | item114 | 4 | each |
| 115 | 115 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by thedeptt. C Series (Schneider MG, legrand, Hager, crabtree Xpro make) (ii) 40A | item115 | 6 | each |
| 116 | 116 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (Schneider MG, legrand, Hager, crabtree Xpromake) (i) 6 to 32A | item116 | 2 | each |
| 117 | 117 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (Schneider MG, legrand, Hager, crabtree Xpromake) (ii) 40A | item117 | 2 | each |
| 118 | 118 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (Schneider MG, legrand, Hager, crabtree Xpro make) (i) 40A | item118 | 2 | each |
| 119 | 119 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (Schneider MG, legrand, Hager, crabtree Xpro make) (ii) 63A | item119 | 2 | each |
| 120 | 120 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300 M A sensitivity DP RCCB (Schneider MG, legrand, Hager, crabtree Xpro make) (i) 25A | item120 | 2 | each |
| 121 | 121 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300 M A sensitivity DP RCCB (Schneider MG, legrand, Hager, crabtree Xpro make) (i) 40A | item121 | 2 | each |
| 122 | 122 | Supplying, installation, testing and commissioning of the following CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc in the ceiling including supplying ball and socket arrangement suspension down rod of 19 mm dia H.G conduit of required length max 0.75 cm including making necessary connection cable, as approved by the Deptt.)with 1.5 sq. mm PVC insulated single core copper conductor as reqd. and as directed by the Deptt. GGX 620 2 x 28 W TL5 EBP M1, 240 V Philips make LINE LIGHT Surface mounted and Suspended luminaries including lamps. or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent WIPRO/ JAQUAR make). | item122 | 22 | each |
| 123 | 123 | Supplying, installation, testing and Commission of the following indoor Decorative recessed typed mirror optics down lighter luminaries complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department. 15W, BBS 170 1 X DLED 5000 PSU-WH Phillip make GREEN LED recessed mounted down lighter with latest LED technology. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent WIPRO/ JAQUAR make). | item123 | 8 | each |
| 124 | 124 | Interior works of Cafeteria, First floor furniture and LED wall: Providing and fixing in position High Pressure Steam Cured Non Asbestos Fibre Cement Everest Heavy Duty Wall Board (Density>1500 Kg/m3) confirming IS 14862 & Type A as Eves Board to be fixed on iron or timberSection as per the drawing & directions of engineer-in-charge. Finally, if specified, the boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer after installing it on to the concealed metal framework. (ii) Using 12mm thick board of Everest make or equivalent | item124 | 10 | sqm |
| 125 | 125 | Providing, fitting and fixing in position PVC ceiling in cafeteria over alluminium frame as per approved design and as instructed. | item125 | 12 | sqm |
| 126 | 126 | Providing, fitting and fixing in position PVC board in cafeteria wall over alluminium frame as per approved design and as instructed. | item126 | 78.07 | sqm |
| 127 | 127 | Flower tub container made out of water proof board of size 10.50 m. lemgth 0.200 m width and 0.200 m high | item127 | 10.5 | Rm |
| 128 | 128 | Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete etc complete as specified and directed by the department at all levels. (a) with 12 mm thick toughened glass | item128 | 4.2 | sqm |
| 129 | 129 | Providing, fitting and fixing in position MDF board in wall of cafeteria12 mm thick, wall to be painted with black plastic paint as approved and as directed. | item129 | 8.92 | sqm |
| 130 | 130 | Providing, fitting and fixing in position MDF board in counter of cafeteria 12 mm thick as approved and as directed. | item130 | 6.31 | sqm |
| 131 | 131 | Providing, fitting and fixing in wall paper in cafeteria wall as approved and as directed. | item131 | 18 | sqm |
| 132 | 132 | Providing, fitting and fixing model of Robot as directed and as specified. | item132 | 3 | each |
| 133 | 133 | Providing, fitting and fixing model of car as directed and as specified. | item133 | 1 | each |
| 134 | 134 | Providing, fitting and fixing model of Google as directed and as specified. | item134 | 1 | each |
| 135 | 135 | Providing, fitting and fixing model of Alexa as directed and as specified. | item135 | 1 | each |
| 136 | 136 | Cane and bamboo decoration work at 4th floor as per design and as directed. | item136 | 1 | job |
| 137 | 137 | Providing and making office table for work station of size 1500x750x750 mm with 25 mm thk projected top finished with 2 mm thk edge banding as per matching shade and made out of 19mm ply including all vertical, horizontal and side panels with required projection and grooves on front fascia as per design. | item137 | 4 | each |
| 138 | 138 | Providing and making 6 seater conference table 2250mm X 900 mm with 50 mm top in PU Lamination finish of size 1520(L) x1530(W) x750 (H) mm including all vertical, horizontal and side panels as per design. The table will have supporting base padestal finished with 1mm thk. laminate in required groove finish as per design. The PU Lamination finished table top will have cut-outs and provision for inserting required POP-UP Boxes afor Data, power slots etc, as per requirement. The cost of the entire table should include all hardware S.S finished knobs, self closing hinges, wire managers, spring loaded shutters, drawer slides, Locks, tower bolts, key boards etc, complete in all respect. | item138 | 1 | each |
| 139 | 139 | Supplying of conference High back chair with fabric upholsetry with slef design, centre tilt mechanism with single locking system gas lift with nylon base. Armest made of out virgin materail of PP. Make Godrej (Ell series) or eqv. | item139 | 6 | each |
| 140 | 140 | Supplying of workstation High Back chair with fabric upholsetry with slef design, centre till mechanism with single locking system, gas lift with nylon base. Armest made of out virgin materail of PP. Make Godrej (EII series) or eqv. | item140 | 4 | each |
| 141 | 141 | Supplying of visitors chair in work station with latherite finish self design, armrest made of virgin material as per direction of department | item141 | 8 | each |
| 142 | 142 | Low ht. 70mm thk.solid partitions with both side Laminate | item142 | 15.61 | sqm |
| 143 | 143 | Supplying, fitting and fixing 8'X10' P-6 ( 576*576) LED lamp: SMD3528 3 in 1 , module size :192*192 mm, module resolution :32x 32 DOTS , cabinet size : 576*576 mm, cabinet resolution :96*96 DOTS cabinet quantity 24, cabinet material DIECAST, refresh rate : 2200 HZ, Brightness :2500 -2700 nits, Driving IC: MBI5124/SUM, Protection level :IP65, lamp -epstar/nisanstar, with processor (with sending card), laptop including transportation | item143 | 1 | set |
| 144 | 144 | Providing and making Mentor's Table of size 2300x900x750 mm with thk projected top with TW moulding along edges and made out of 19 mm ply including all vertical, horizontal and side panels with required projection and grooves on front fascia as per design. The table will consist of two sets of drawer of size 125x500 (D) x 450 mm and one set of drawer of size 200x500 (D) x 450 mm made out 12mm ply with required sliding channels.The Table will consist of side credenza of size (450x1100x750mm)made out of 19 mm ply including one set of drawer of size 125x425x400 mm and one filing cabinet with19 mm th. ply shutter of size 400 mm as per design. The side credenza will further have a key board tray along with provision for a CPU stand at the base.The entire Table incuding side credenza with all exposed surface will be finished with 1mm thk Laminate (ST & Textured finish) of approved shade (Century, Signature, Elvee). The cost of the entire table should include Foot rest, all hardware and fiftting (Hettich or equivalent) including S.S. finesd 75mm Handles, self closing hinges, wiren managers, spring loaded shutters, drawer slides,Locks, tower bolts, key boards etc. complete in all respect. | item144 | 2 | each |
| 145 | 145 | Providing and making L-Type workstation of size 1950x750x750 mm with 35mm thk projected top with TW moulding along edges and made out of 19 mm ply including all vertical, horizontal and side panels with required projection and grooves on front fascia as per design. The table will consist of two sets of drawer of size 125x500 (D) x 450 mm and one set of drawer of size 200x500 (D) x 450 mm made out 12mm ply with required sliding channels.The Table will consist of side credenza of size (450x1100x750mm)made out of 19 mm ply including one set of drawer of size 125x425x400 mm and one filing cabinet with19 mm th. ply shutter of size 400 mm as per design. The side credenza will further have a key board tray along with provision for a CPU stand at the base.The entire Table incuding side credenza with all exposed surface will be finished with 1mm thk Laminate (ST & Textured finish) of approved shade (Century, Signature, Elvee). The cost of the entire table should include Foot rest, all hardware and fiftting (Hettich or equivalent) including S.S. finesd 75mm Handles, self closing hinges, wire managers, spring loaded shutters, drawer slides,Locks, tower bolts, key boards etc. complete in all respect. | item145 | 4 | each |
| 146 | 146 | Providing and making 17 seater Meeting room table with 50 mm top in PU Lamination finish of size 6100(L) x1350(W) x750 (H) mm including all vertical, horizontal and side panels as per design. The table will have supporting base padestal of size 450x 2800 x 700 mm finished with 1mm thk. laminate in required groove finish as per design. The PU Lamination finished table top will have cut-outs and provision for inserting required POP-UP Boxes afor Data, power slots etc, as per requirement. The cost of the entire table should include all hardware S.S finished knobs, self closing hinges, wire managers, spring loaded shutters, drawer slides, Locks, tower bolts, key boards etc, complete in all respect. | item146 | 1 | each |
| 147 | 147 | Supply and making of Reception backdrop -1 as per drawing of size 2250 x 2550 x 325 back lit box stucture with the provision 19mm ply shutters at the back for the service and maintenance. The front panel of the backdrop will have metallic frame border of width 150 mm in ACP finish. The backdrop will be further divided into multiple panels with the use of 25 mm thk ply border in PU finish. These panels will further hold 8 nos of 12mm thk, 300 mm width solid surface (corian-Hanex) in core-cutting finish as per design with required back light illumination. The cetral panel of the Reception backdrop of size 1300 x 1600 mm will have toughned sandwiched glass with Silk fabric inside and required provision for back illumination. The sandwich glass will further have required holes for fixing of powder coated metallic Logo above the Panel. The cost of the backdrop should include all provisions for required light fittings, hardwares, accessories, service shutters etc, complete in all respect. | item147 | 1 | each |
| 148 | 148 | Supplying, fitting and fixing drapery rods along with all accessories in doors, windows and other openings complete as specified and directed by the departmentb at all levels. | item148 | 20 | Rm |
| 149 | 149 | Supplying, fitting and fixing MAC blinds horizontal and vertical complete as specified and directed by the department at all levels. (A) Vertical blinds, Regular. (i) 100 mm | item149 | 117.77 | sqm |
| 150 | 150 | Supplying and installation of Training room chair/ Bin Bag in Mentor Hall | item150 | 15 | each |
| 151 | 151 | Table for canten made out of PVC material 1200 mm diameter as directed and specified | item151 | 11 | each |
| 152 | 152 | Supplying of Chair for canteen made out of PVC material as per design and as specified | item152 | 44 | each |
| 153 | 153 | Umbrella for out door canteen area | item153 | 5 | each |
| 154 | 154 | Table for CEO, 2400W*900D*750H with Side Storage of 2100Wx450Dx620H & Back Storage of 2400Wx450Dx620H L-Type Table top is made of 25mm E1 Grade pre-laminated particle board with Reverse Chamfer Edge with Anodised Flipup provision MS-POWDER COATED wire tray WITH switch plate 150D*120H below the table top and Aluminum flipups of 500Wx120D on table top is considered. | item154 | 1 | each |
| 155 | 155 | Supplying of High back chair for CEO with fabric upholsetry with slef design, centre tilt mechanism with single locking system gas lift with nylon base. Armest made of out virgin materail of PP. Make Godrej (Ell series) or eqv. | item155 | 1 | each |
| 156 | 156 | Supplying of mentors chair with latherite finish self design, centre till mechanism with single locking system, gas lift with nylon base. Armest made of out virgin materail of PP. Make Godrej (EII series) or eqv. | item156 | 2 | each |
| 157 | 157 | Supplying of staff chair with latherite finish self design, armrest made of virgin material as per direction of department | item157 | 2 | each |
| 158 | 158 | Providing Decorative light over landing of staircase as per design and as directed | item158 | 5 | set |
| 159 | 159 | Cooling machine for canteen, casing made out of satinless steel as directed & specified | item159 | 1 | each |
AI Tender Summary
Tender Timeline
Jul 29, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 07, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender