Repair/ Replacement ( 06 Nos ) Of 05 Hp Areator Motor Gear Box Near Golf Ground Under Ge South Patiala, GE South Patiala-Punjab

Repair/ Replacement ( 06 Nos ) Of 05 Hp Areator Motor Gear Box Near Golf Ground Under Ge South Patiala , Disconnecting The Electrical Connections From Lt Panel Board , For Taking Out 5 Hp Areator Motor And Gear Box From Areator Pond After Unscrewing The Nuts / Bolts , Screws Etc , Carrying To Workshop For Repair And Carrying Back The After Repair , Reconnecting With Pump Set , Fixing On Foundation In Areator Pond And Testing , Commissioning To The Entire Satisfaction Of Engineer-In-Charge . . ( Note: The Labour Of Machine Work /Welding Works If Required Shall Be Included Inthe Quoted Rate , However , Spare Parts Shall Be Measured & Paid Separately Under Respective Items Here In After ) , M & L For Rewinding The Electric Motor Capacity Upto 5 Hp Connected With Gear Box Assembly By Opening The Motor , Removing All Burnt Out Coils , Cleaning The Slots And Rewinding The Same With Pvc Insulated Copper Wire Of Existing Gauge Including Replacement Of Old Bearing , Insulation Material Etc . And Reassembling , Testing And Commissioning Of Electric Motor On Full Load For 8 Hours Continuous Running Complete All As Specified And Directed . , M & L For Opening The Gear Box And Replacing Gear Unit , Shaft Gear Oil Seal Etc . And Reassembling , Testing And Commissioning Of Gear Box On Full Load For 8 Hours Continuous Running Complete All As Specified And Directed . , Supply And Replacement Of Dol Starter 3 Phase , 415 Volt For Centrifugal Pump Set 5Hp With Over Load Relay , Contactor Ml 1 . 5 Magnetic Coil Duly Fixed In Enclosure Having Relay Setting Suitable For 5/7 . 5 Hp Pump Set Including Taking Down Exisiting Unservicable Starter Of Any Make & Type , Supply And Replace Gear Oil Of Gear Box Unit All As Specified And Directed . , Supply And Replace Iron Coupling Suitable For Gear Mechanism Complete As Per Sample With Nuts , Bots And Washers . , Supply And Replace Stainless Steel-316 Shaft Of Flash Mixer Mechanism Size 40 Mm Dia Of Length Not Less Than 3 Mtrs Fixed With Ss Impellor Of Dia 450 Mm As Per Sample Complete All As Specified And Directed .

Refer document

Refer document

INR 2.21 Lakhs /-

	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Disconnecting the electrical connections from LT panel board, for taking out 5 HP areator motor and gear box from areator pond after unscrewing the nuts / bolts, screws etc, carrying to workshop for repair and carrying back the after repair, reconnecting with pump set, fixing on foundation in areator pond and testing, commissioning to the entire satisfaction of Engineer-in-Charge. . (Note: The labour of machine work /welding works if required shall be included inthe quoted rate, However, spare parts shall be measured & paid separately under respective items here in after)		6	Each Job
2	2	M & L for rewinding the electric motor capacity upto 5 HP connected with Gear box assembly by opening the motor , removing all burnt out coils, cleaning the slots and rewinding the same with PVC insulated copper wire of existing gauge including replacement of old bearing, insulation material etc. and reassembling , testing and commissioning of electric motor on full load for 8 hours continuous running complete all as specified and directed.\n		6	Each Job
3	3	M & L for opening the gear box and replacing gear unit,shaft gear oil seal etc. and reassembling , testing and commissioning of gear box on full load for 8 hours continuous running complete all as specified and directed.\n		6	Each Job
4	4	Supply and replacement of DOL starter 3 phase, 415 volt for centrifugal pump set 5HP with over load relay, contactor ML 1.5 magnetic coil duly fixed in enclosure having relay setting suitable for 5/7.5 HP pump set including taking down exisiting unservicable starter of any make & type		6	Each
5	5	Supply and replace Gear oil of Gear box unit all as specified and directed.		12	Ltrs
6	6	Supply and replace Iron Coupling suitable for Gear mechanism complete as per sample with nuts,bots and washers.		6	Each
7	7	Supply and replace Stainless steel-316 shaft of Flash mixer mechanism size 40 mm dia of length not less than 3 mtrs fixed with SS impellor of dia 450 mm as per sample complete all as specified and directed.		6	Each Job