Special Repair To Lt Panel , Water Pipe Line , Filter Media And Allied Works At Ranikhet Under Ge Ranikhet
Tender Value
14.55 Lakhs
Estimated cost
Bid Submission
13 Aug 2019
0 days left
EMD
29100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE Ranikhet → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Lt Panel , Water Pipe Line , Filter Media And Allied Works At Ranikhet Under Ge Ranikhet
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | BOQ ( Sch 'A') \nExcavation in trenches in hard/dence soil not exc 1.5 m wide and not exc 1.5mtr depth for laying pipe line and getting out including trimming sides and forming bottom surface to the required level/slope etc. complete all as specified and directed | 45 | Cubic Metre | |
| 2 | 2 | Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed. | 10 | Cubic Metre | |
| 3 | 3 | Returning, filling in, including spreading ,levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed. | 35 | Cubic Metre | |
| 4 | 4 | Supply and fixing Steel water tubing medium grade galvanised with all GI fittings (such as bend,elbows,tees, connections, short pieces, back, nuts, unions, caps & plugs etc) laid in trenches or on open surfaces bore of pipe 80 mm including taking out old unserviceable steel tubing complete all as specified and directed. | 135 | Running\nMetre | |
| 5 | 5 | All as per item no 4 here-in-before but bore of pipe 100 mm bore | 135 | Running\nMetre | |
| 6 | 6 | All as per item no 4 here-in-before but bore of pipe 150 mm bore | 125 | Running\nMetre | |
| 7 | 7 | Supply, fixing, jointing and testing 200mm dia cast iron sluice valve heavy duty class PN1.6 flanged ends any pattern with head wheel and brass spindle ISI marked with jointing material flanged joint rubber gasket 6 mm thick , MS nuts bolts, washers etc including taking out of existing unserviceable sluice valve complete all as specified and directed. | 1 | Each | |
| 8 | 8 | All as per item no 7 here-in-before but 150 mm dia | 1 | Each | |
| 9 | 9 | All as per item no 7 here-in-before but 100 mm dia | 2 | Each | |
| 10 | 10 | All as per item no 7 here-in-before but 80 mm dia | 1 | Each | |
| 11 | 11 | Taking out/ Disconnecting of existing NRV and supply, fixing, jointing and testing 80mm dia cast steel Non Return Valve, class 300 ASA, flanged and drilled both ends with gun metal seat and making bypass arrangement flanged type complete with & including flanges,fibre sheet gasket, nut-bolts & washers complete all as specified and directed | 2 | Each | |
| 12 | 12 | Taking up or down existing GI steel water tubing of any grade 40mm bore including all fittings and accessories from trenches/open surfaces, Filtration plant including replacement of old damaged pipes,cleaning ,re-threading the old threads, cutting, welding work, etc as required and re-fixing the same after necessary repair works, etc as required , including new GI fittings and accessories as required in new or old position including necessary excavation & earth work complete all as specified and directed | 80 | Running\nMetre | |
| 13 | 13 | Supply and fixing in repair LED Security light 45 Watt luminaire fitting (IP 66 poweder coated pressure die cast aluminium High power LED Street light with heat resistant toughened glasswith lens with electronic driver.C&S) Fitting will be fitted with GI pipe light grade Bracket 1.2 mtr long 40 mm dia fixed on wall with suitable size 2 Nos MS clamp including nut, bolts and washers and making connection with using 1.5 sqmm PVC insulated Multistranded copper conductor three single core cable i complete all as specified and directed. Make:- C&S Cat Part No LTESSI45WLED or equivalent make in Havells/HPL/Philips | 5 | Each | |
| 14 | 14 | Construction of brick masonary valve pit chamber with sub class 'B' bricks using old size bricks in cement mortar 1:3 of size 90x90x100 cms (internal dimension) complete with mild steel angle frame work (40x40x6mm) and 3 mm thick Mild steel black sheet top cover with hinges and locking arrangement, rendering15 mm thick in cement mortar 1:4 internally and flush pointing to brick surfaces externally as work proceeds, necessary excavation and earthwork in any type of soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 mtrsincluding painting to steel surfaces with two coats of synthetic enamelled paint over a coat of red oxide complete all as specified and directed. | 1 | Each Job | |
| 15 | 15 | All as per srl item No.14 here in before but of size 75x75x90 cms. | 2 | Each Job | |
| 16 | 16 | Taking out existing filter media of various sizes from slow sand gravity filter bed (of size 3030mmx2090mmx3000mm, qty-02 nos) and stacking out properly outside of the filteration plant at Nagpani complete all as specified and directed. | 13.24 | Cubic Metre | |
| 17 | 17 | Preparation / cleaning of complete internal surfaces of filteration plant at Nagpani by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and inflorescent, trading oil and greasy spots complete all as specified and directed. | 84 | Square \nMetre | |
| 18 | 18 | Material & Labour for applying two coats of white wash on walls of filteration plant complete all as specified and directed. | 13.8 | Square \nMetre | |
| 19 | 19 | Material & Labour for preparation of old decorative external wall surfaces of filtration plant by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and elllorescent salts and trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed. | 48 | Square \nMetre | |
| 20 | 20 | Material & Labour for filling,spread and levelled of filter media of size 50 to 40mm hand picked screened and graded stone aggregate 150mm thick from bottom surface in filter bed (of size 3030mmx2090mmx3000mm, qty-02 nos) complete all as specified and directed. | 1.89 | Cubic Metre | |
| 21 | 21 | All as per srl item No. 20 here in before but size of filter media 40 mm to 12.5 mm hand picked screened and graded stone aggregate filling 150mm thick | 1.89 | Cubic Metre | |
| 22 | 22 | All as per srl item No. 20 here in before but size of filter media 12.5 mm to 6 mm hand picked screened and graded stone aggregate filling 150m thick. | 1.89 | Cubic Metre | |
| 23 | 23 | All as per srl item No. 20 here in before but size of filter media 10 mm to 3 mm hand picked screened and graded stone aggregate filling 150mm thick. | 1.89 | Cubic \nMetre | |
| 24 | 24 | All as per srl item No. 20 here in before but size of filter media 6 mm to 2 mm hand picked screened and graded stone aggregate filling 150mm thick. | 1.89 | Cubic Metre | |
| 25 | 25 | All as per srl item No. 20 here in before but size of filter media 700 to 600 micron screened, graded and dust free quartz sand filling 300mm thick | 3.79 | Cubic \nMetre | |
| 26 | 26 | Supply & fixing in repairs Copper finger suitable for Oil emerused starter 100 HP all as specified and directed. | 60 | Each | |
| 27 | 27 | Supply & fixing in repairs Copper gutka suitable for Oil emerused starter 100 HP all as specified and directed. | 60 | Each | |
| 28 | 28 | Supply and fixing in repair coupling rubber washer as per sample all as specified and directed.. | 20 | Sets | |
| 29 | 29 | Supply, installing, testing and commissioning, factory made and tested (prototype having been CPRI type test certified), LT feeder pillar box (KIOSK), outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated copper bus bars suitable Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, externally powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) lock with 2 keys, internal wiring 2.5 Sqmm with PVC insulated, solid copper conductor, FRLS cables, IS-694 marked of adequate size incl the provision of space to accommodate the under mentioned items incl taking out U/s one and making connection with existing LT cables including the following:- (a) Incoming (i)MCCB 4 pole, 415 volts AC grade, 8000 Amps rating and 36 KA rupturing capacity complete - 01 No | 1 | Each Job | |
| 30 | 29.1 | Item 29 ( contd ) (ii) Voltmeter 0-500 volts, square, 144 mm, flush pattern with 3 way rotary selector switch - 01 No (iii) Ammeter size 144 mm, square dial, flush pattern having dual range 1000 amps with three way rotary selector switch with suitable size of LT's 01 No(iv) Indicating lamps : 01 set of three (b) Outgoing (i) MCCB 4 pole, 415 volts AC grade,315 Amps rating and 36 KA rupturing capacity complete - 01 No (ii) MCCB 4 pole, 415 volts AC grade,200 Amps rating and 25 KA rupturing capacity complete - 02 No (iii) MCB SPN 230 volts AC grade,C Curve, 40 Amps rating complete - 02 Nos (iii) Timer Switch (daily with IP 53 box) - 01 Nos (c) Platform for the panel with PCC 1:4:8 type D-2 with 40mm graded crushed stone aggregate, 15 cm thick in foundation, brick work in CM 1:6 with sub class `B', old size bricks, rendering 15mm thick in CM 1:6 on exposed surfaces and 100mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. | |||
| 31 | 29.2 | Item 29 (contd) The platform shall be such that it is of a height 45cm above the nearest road level. Note : (i) All out going feeders shall be connected by cable through suitable size gland plate / glands. (ii) The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint. | |||
| 32 | 30 | Supply, installing, testing and commissioning, factory made and tested (prototype having been CPRI type test certified), LT feeder pillar box (KIOSK), outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated copper bus bars suitable Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, externally powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) lock with 2 keys, internal wiring 2.5 Sqmm with PVC insulated, solid copper conductor, FRLS cables, IS-694 marked of adequate size incl the provision of space to accommodate the under mentioned items incl taking out U/s one and making connection with existing LT cables including the following:- (a) Incoming (i) MCCB 4 pole, 415 volts AC grade, 400 Amps rating and 36 KA rupturing capacity complete - 01 No | 1 | Each Job | |
| 33 | 30.1 | Item 30 ( contd ) (ii) Voltmeter 0-500 volts, square, 144 mm, flush pattern with 3 way rotary selector switch - 01 No (iii) Ammeter size 144 mm, square dial, flush pattern having dual range 1000 amps with three way rotary selector switch with suitable size of LT's 01 No (iv) Indicating lamps : 01 set of three (b) Outgoing (i) MCCB 4 pole, 415 volts AC grade,250 Amps rating and 25 KA rupturing capacity complete - 01 No (ii) MCCB 4 pole, 415 volts AC grade,200 Amps rating and 25 KA rupturing capacity complete - 02 No (iii) MCCB 4 pole, 415 volts AC grade,63 Amps rating and 25 KA rupturing capacity complete - 01 No (iv) MCB SPN 230 volts AC grade,C Curve, 40 Amps rating complete - 03 Nos (v) Timer Switch (daily with IP 53 box) - 01 Nos (c) Platform for the panel with PCC 1:4:8 type D-2 with 40mm graded crushed stone aggregate , 15 cm thick in foundation, brick work in CM 1:6 with sub class `B', old size bricks, rendering 15mm thick in CM 1:6 on exposed surfaces and 100mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. size letters in synthetic enamel white paint. | |||
| 34 | 30.2 | Item 30 ( contd ) The platform shall be such that it is of a height 45cm above the nearest road level. Note :- (i) All out going feeders shall be connected by cable through suitable size gland plate / glands. (ii) The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint. | |||
| 35 | 31 | Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised strip 25x4 mm earth lead by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate), GI protection pipe light grade 25 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed Note: - On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt. | 4 | Each Set |
AI Tender Summary
Tender Timeline
Jul 26, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 16, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
Completed