Dismantling And Re Construction Of Samaj Mandir At Ashok Nagar Under Dalit Vasti Sudhar Yujna For Municipal Council Udgir
Tender Value
12.14 Lakhs
Estimated cost
Bid Submission
02 Aug 2019
0 days left
EMD
12141
Bank guarantee accepted
Document Fee
560
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
UDGIR → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Dismantling And Re Construction Of Samaj Mandir At Ashok Nagar Under Dalit Vasti Sudhar Yujna For Municipal Council Udgir
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. SSR 2018-19 ITEM NO. 46.15 & PAGE NO.371 | BI01010001010000000000000515BI0100001113 | 12 | NOS. |
| 2 | 2 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete SSR SSR 2018-19 ITEM NO. 46.19 & PAGE NO.371 | BI01010001010000000000000515BI0100001114 | 72 | SQM |
| 3 | 3 | Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. SSR 2018-19 ITEM NO. 46.16 & PAGE NO.371 | BI01010001010000000000000515BI0100001115 | 4 | NOS. |
| 4 | 4 | Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. SSR SSR 2018-19 ITEM NO. 46.29 & PAGE NO.372 | BI01010001010000000000000515BI0100001116 | 16.991 | CUM |
| 5 | 5 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. SSR 2018-19 ITEM NO. 46.09 & PAGE NO.370 | BI01010001010000000000000515BI0100001117 | 16.56 | CUM |
| 6 | 6 | Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. SSR 2018-19 ITEM NO. 46.11 & PAGE NO.370 | BI01010001010000000000000515BI0100001118 | 9.72 | CUM |
| 7 | 7 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Bd.A.1 Page No. 259 (I.No. 21.02. P.No.187) | BI01010001010000000000000515BI0100001119 | 13.5 | CU.M. |
| 8 | 8 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m). (I.No. 21.06. P.No.187) | BI01010001010000000000000515BI0100001120 | 13.5 | CU.M. |
| 9 | 9 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) (I.No. 21.14. P.No.188) | BI01010001010000000000000515BI0100001121 | 6.75 | CU.M. |
| 10 | 10 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand Spec. No. Bd. E. 1 Page No. 287. ( I. No. 24 .1 P. No. 177) | BI01010001010000000000000515BI0100001122 | 7.65 | CU.M. |
| 11 | 11 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.\nSpec. No. Bd. P. 3 Page No. 298. ( I. No.25.11 P. No. 222) | BI01010001010000000000000515BI0100001123 | 8.82 | CU.M. |
| 12 | 12 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping,compaction finishing the formed surfaces with cement mortar1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided andcuring etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand Spec. No. Bd. F. 5 Page No. 300. SSR 2017-18 ( I. No 25.31 P. No.225 ) | BI01010001010000000000000515BI0100001124 | 4.743 | CU.M. |
| 13 | 13 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural\nsand/V.S.I. quality Artificial Sand Spec. No. Bd. F.6 Page No. 300. ( I. No 25.50 P. No.225 ) | BI01010001010000000000000515BI0100001125 | 8.106 | CU.M. |
| 14 | 14 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No. Bd. F. 8 Page No. 302. SSR 2017-18 ( I. No. 25.70 P. No.227) | BI01010001010000000000000515BI0100001126 | 8.4 | CU.M. |
| 15 | 15 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd. F. 9, Page No. 303. ( I. No. 26.05 P. No.230) | BI01010001010000000000000515BI0100001127 | 0.54 | CU.M. |
| 16 | 16 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations,\nslabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs,\ndrawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. ITEM NO. 26.33 & PAGE NO.236 | BI01010001010000000000000515BI0100001128 | 2.558 | CU.M. |
| 17 | 17 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Bd.G. 1 Page No. 313 SSR 2017-18 ( I. No. 27.01 P. No.246) | BI01010001010000000000000515BI0100001129 | 4.664 | CU.M. |
| 18 | 18 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.complete. ( I. No.21.37 P.No.191) | BI01010001010000000000000515BI0100001130 | 18.9 | CU.M. |
| 19 | 19 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. ITEM NO. 21.38 & PAGE NO.192 | BI01010001010000000000000515BI0100001131 | 18.9 | CU.M. |
| 20 | 20 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc.Complete Bd.G.5 Page No. 315 ( I. No. 27.05 P. No.246) | BI01010001010000000000000515BI0100001132 | 19.084 | CUM |
| 21 | 21 | Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. Bd.H.4 Page No. 331 ( I. No. 32.08 P. No.224) | BI01010001010000000000000515BI0100001133 | 147.78 | SQM |
| 22 | 22 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd.L.7 Page No. 369 ( I. No. 32.11 P. No.261) | BI01010001010000000000000515BI0100001134 | 132 | SQM |
| 23 | 23 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. ( I. No.32.15 P. No.261) | BI01010001010000000000000515BI0100001135 | 147.78 | SQM |
| 24 | 24 | Providing and applying priming coat on concrete/ masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil,grease, dirt and other foreign matter and sand papering as required etc. complete. SSR 2017-18 ( I. No.35.21 P. No.282) | BI01010001010000000000000515BI0100001136 | 279.78 | SQM |
| 25 | 25 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excludingthe primer coat.) etc. complete. ( I. No.36.11 P. No. 285) | BI01010001010000000000000515BI0100001137 | 147.78 | SQM |
| 26 | 26 | Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Spec. No. Bd. L. 0.8 Page No. 406. ( I. No.35.15 P. No. 282) | BI01010001010000000000000515BI0100001138 | 132 | SQM |
| 27 | 27 | Providing and laying vitrified mirror / glossy finish tiles decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring Bd.M. 12 Page No.385 ( I. No. 33.4 P. No.271) | BI01010001010000000000000515BI0100001139 | 54 | SQM |
| 28 | 28 | Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting Bd.M. 12 Page No.385 ( I. No. 33.41 P. No.233) | BI01010001010000000000000515BI0100001140 | 3.6 | SQM |
| 29 | 29 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete ( I. No.39.01 P. No. 306) | BI01010001010000000000000515BI0100001141 | 0.195 | SUM |
| 30 | 30 | Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats.(Excluding the door frame) ( I. No.39.04 P. No. 306) | BI01010001010000000000000515BI0100001142 | 2.1 | SQM |
| 31 | 31 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size,crossings of M.S. flats of size 18 x 5 mm T or E section for runnerof minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting\netc. complete. (I.S. 105211983). ( I. No. 39.29 P. No. 212) | BI01010001010000000000000515BI0100001143 | 4.2 | SQM |
| 32 | 32 | Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete. ( I. No. 39.29 P. No. 212) | BI01010001010000000000000515BI0100001144 | 3.24 | SQM |
| 33 | 33 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. ( I. No.40.01 P. No. 229) | BI01010001010000000000000515BI0100001145 | 11.52 | SQM |
| 34 | 34 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. ( I. No.33.68 P. No.237) | BI01010001010000000000000515BI0100001146 | 8.832 | SQM |
| 35 | 35 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box ( I. No.39.43 P. No.317) | BI01010001010000000000000515BI0100001147 | 11.52 | SQM |
| 36 | 36 | In SSR for items of supply of Rubble, Murum, Soil, 60mm./40mm. metal (Hand broken), royalty charges are not included in the rates. For the items of sand and crushed metal rates are inclusive of royalty charges.Prevalent Royalty charges shall be separately considered while preparing estimate and shall be part of Schedule-B of tender.Any revision in Royalty charges shall be included in the rate analysis of the respective item. If there is variation in Royalty charges the difference shall be paid extra over the items to the contractor and shall be recovered if the Royalty rates are reduced by Govt.i.e Revenue department [As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.67 Dt.15 May,2015. States that the royalty charges of Rs.141.34/Cu.M. ) are considered. E DSR ITEM NO. ... & PAGE NO.... SAND METAL > 40MM | BI01010001010000000000000515BI0100001148 | 39.17 | Cu.M. |
| 37 | 37 | Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender. testing of material by Quality control and certified quality must be use by contractor. CONCRETE Compressive strength of C.C.Cube (Set of 3 cubes) | BI01010001010000000000000515BI0100001149 | 24 | Nos. |
| 38 | 38 | BASIC TEST FOR CEMENT | BI01010001010000000000000515BI0100001150 | 1 | Nos. |
| 39 | 39 | BASIC TEST FOR SAND | BI01010001010000000000000515BI0100001151 | 1 | Nos. |
| 40 | 40 | BASIC TEST FOR AGG.BED CEMENT CONCRETE | BI01010001010000000000000515BI0100001152 | 1 | Nos. |
| 41 | 41 | CONCRETE MIX DESIGN (WITH ALL TESTS ON BASIC MATERIALS ) | BI01010001010000000000000515BI0100001153 | 1 | Nos. |
| 42 | 42 | BASIC TEST FOR STEEL | BI01010001010000000000000515BI0100001154 | 1 | Nos. |
| 43 | 43 | BASIC TEST FOR TILES | BI01010001010000000000000515BI0100001155 | 1 | Nos. |
AI Tender Summary
Tender Timeline
Jul 26, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 02, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 03, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender