Construction and Extension of Pathology/Laboratory Room including Plumbing, Sanitary and Electrical Works at ESIC Model Hospital, Beltola, Assam
Tender Value
5.29 Lakhs
Estimated cost
Bid Submission
14 Aug 2019
0 days left
EMD
10600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ESIC Model Hospital Beltola, Guwahati → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction And Extension Of Pathology / Laboratory Room Including Plumbing, Sanitary And Electrical Works At Esic Model Hospital, Beltola, Assam
BOQ
| Sl.No. | Item Description | DSR 2018 Reference | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.\n All kinds of soil. | 2.8.1 | 5.54 | cum |
| 2 | 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge:\n All kinds of soil | 2.1.1 | 20.57 | sqm |
| 3 | 3 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.\nAll kinds of soil | 2.28.1 | 20.57 | sqm |
| 4 | 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 2.27 | 1.03 | cum |
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\n 1:3:6 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 40 mm nominal size). | 4.1.6 | 2.06 | cum |
| 6 | 6 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) | 4.1 | 20.57 | sqm |
| 7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\n 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). | 4.1.2 | 0.68 | cum |
| 8 | 8 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :\nLintels, beams, plinth beams, girders, bressumers and cantilevers | 5.9.5 | 26 | sqm |
| 9 | 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :\n1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). | 5.1.2 | 3.81 | cum |
| 10 | 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.\nCement mortar 1:3 (1 cement :3 coarse sand) | 6.13.1 | 63.92 | sqm |
| 11 | 11.1 | 15 mm cement plaster on the rough side of single or half brick wall of mix :\n 1:4 (1 cement: 4 coarse sand) | 13.5.1 | 64.62 | sqm |
| 12 | 11.2 | 12 mm cement plaster of mix :\n 1:4 (1 cement: 4 coarse sand) | 13.4.1 | 59.19 | sqm |
| 13 | 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 8.31 | 21.84 | sqm |
| 14 | 13.1 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | 11.37 | 5.97 | sqm |
| 15 | 13.2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.\nSize of Tile 600x600 mm | 11.41.2 | 18.62 | sqm |
| 16 | 14.1 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :\n New work (two or more coats) over and including water thinnable priming coat with cement primer | 13.41.1 | 59.19 | sqm |
| 17 | 14.2 | Finishing walls with Acrylic Smooth exterior paint of required shade :\n13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 13.46.1 | 64.62 | sqm |
| 18 | 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.\nThermo-Mechanically Treated bars of grade Fe-500D or more. | 5.22.6 | 756.29 | kg |
| 19 | 16 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 10.1 | 417.97 | kgs |
| 20 | 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\nTwo or more coats on new work | 13.61.1 | 8.08 | sqm |
| 21 | 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).\nKiln seasoned and chemically treated hollock wood | 9.1.3 | 0.07 | cum |
| 22 | 19 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding\nin cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | 9.53 | 12 | each |
| 23 | 20 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:\n 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 9.20.1 | 5.88 | sqm |
| 24 | 21 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door\nframe to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames\nreinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin- charge Extruded section profile size 42x50 mm | 9.117.2 | 5.1 | metre |
| 25 | 22 | Providing and fixing to existing door frames.\n24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). | 9.118.1 | 1.89 | sqm |
| 26 | 23.1 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.\nFixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | 10.13.1 | 40 | Kg. |
| 27 | 23.2 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and\nwelded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary\nbutt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. | 10.31 | 50 | kg |
| 28 | 24 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :\n 4.0 mm thick glass panes | 10.30.1 | 2.4 | sqm |
| 29 | 25 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :\nW.C. pan with ISI marked white solid plastic seat and lid | 17.3.1 | 1 | each |
| 30 | 26 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:\n White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | 17.7.1 | 1 | each |
| 31 | 27 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :\nSize 600x450x200 mm | 17.11.2 | 1 | each |
| 32 | 28 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :\nCircular shape 450 mm dia | 17.32.1 | 1 | each |
| 33 | 29 | Providing and fixing toilet paper holder :\n C.P. brass | 17.34.1 | 1 | each |
| 34 | 30 | Providing and fixing soil, waste and vent pipes :\n100 mm dia\n Sand cast iron S&S pipe as per IS: 1729 | 17.35.1.1 | 1 | each |
| 35 | 31 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :\n100 mm dia pipe | 17.36.2 | 8 | each |
| 36 | 32 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.\n Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms | 17.69.2 | 2 | each |
| 37 | 33 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms | 17.70.2 | 2 | each |
| 38 | 34 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. | 17.72 | 1 | each |
| 39 | 35 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.\n100 mm dia\nSand cast iron S&S as per IS - 1729 | 17.38.1.1 | 2 | each |
| 40 | 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.\n20 mm nominal outer dia Pipes | 18.9.2 | 30 | metre |
| 41 | 37 | Providing and fixing brass stop cock of approved quality :\n20 mm nominal bore | 18.16.2 | 1 | each |
| 42 | 38 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n25 mm nominal bore\n Horizontal | 18.19.1.1 | 1 | each |
| 43 | 39 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :\n25 mm nominal bore | 18.18.3 | 1 | each |
| 44 | 40 | Providing and fixing uplasticised PVC connection pipe with brass unions :\n45 cm length\n15 mm nominal bore | 18.21.2.1 | 2 | each |
| 45 | 41 | Providing and fixing PTMT bib cock of approved quality and colour.\n15 mm nominal bore, 122mm long, weighing not less than 99 gms | 18.54.2 | 2 | each |
| 46 | 42 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 19.32.1 | 1 | each |
| 47 | 43 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | 18.65 | 1 | each |
| 48 | 44 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\n Two or more coats on new work | 13.61.1 | 8.08 | sqm |
| 49 | 45 | Providing and fixing Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,\n(i) Single socketed pipes.\n1 10 mm diameter | 12.41.2 | 6 | metre |
| 50 | 46 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :\n 125 mm | 9.100.1 | 6 | each |
| 51 | 47 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :\n250x10 mm | 9.97.2 | 6 | each |
| 52 | 48 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | 21.13 | 1 | each |
| 53 | 49 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 15.6 | 2 | cum |
| 54 | 50 | Providing and fixing Health faucet with connection pipe complete in all respect | MR | 1 | each |
| 55 | 51 | Providing and fixing Dyna roof of thickness 0.5mm | M.R. | 44.96 | sqm |
| 56 | 52 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.\nGroup B | 1.10.2 | 10 | each |
| 57 | 53 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. | 1.13 | 28 | metre |
| 58 | 54 | Supply and fixation of 12W SQUARE PANEL LIGHT complete in all respect | M.R.. | 2 | Nos. |
| 59 | 55 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross- T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.\nWith 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles | 26.23.1 | 20.57 | sqm |
AI Tender Summary
Tender Timeline
Jul 25, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 16, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender