Supply And Installation Of Stainless Steel , Ss , Fittings For Replacement Of Carbon Steel , Cs , Fittings At Wrpl Koyali Base Stations
Tender Value
8.51 Lakhs
Estimated cost
Bid Submission
09 Aug 2019
0 days left
EMD
10100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
WRPL Koyali Base → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Installation Of Stainless Steel , Ss , Fittings For Replacement Of Carbon Steel , Cs , Fittings At Wrpl Koyali Base Stations
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 10 | Material Supply | Item 10 | ||
| 2 | 20 | SS Tube (1/2\" OD tube (SS316)) | Item 20 | 792 | Meter |
| 3 | 30 | Male Connector(1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) OD Tube) | Item 30 | 1016 | No. |
| 4 | 40 | Female Connector (1/2\" (12.7mm) FNPT X 1/2\" (12.7mm) OD Tube) | Item 40 | 104 | No. |
| 5 | 50 | Union TEE (3 X 1/2\" (12.7mm) OD Tube connection) | Item 50 | 58 | No. |
| 6 | 60 | Tube End Cap (For 1/2\" (12.7mm) OD Tube Connection) | Item 60 | 217 | No. |
| 7 | 70 | Plug (1/2\" (12.7mm) MNPT) | Item 70 | 44 | No. |
| 8 | 80 | Hex Nipple (1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) MNPT X 80mm ) | Item 80 | 12 | No. |
| 9 | 90 | 3 Way Two Valve Manifold (3 x 1/2\" NPTF) | Item 90 | 196 | No. |
| 10 | 100 | Needle Valve (2 x 1/2\" NPTF) | Item 100 | 27 | No. |
| 11 | 110 | Excess Flow Valve (1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) OD Tube) | Item 110 | 10 | No. |
| 12 | 120 | Seal Chamber (3 x 1/2\" NPTF) | Item 120 | 15 | No. |
| 13 | 130 | Tube Bender 1/2\" | Item 130 | 4 | No. |
| 14 | 140 | Tube Cutter for Tube Sizes (1/2\" OD to 1-1/2\" OD) | Item 140 | 4 | No. |
| 15 | 150 | Composite | Item 150 | ||
| 16 | 160 | Taking delivery, shifting within a road distance of 500 meters and installation & testing of PI+Pressure Switch / Pressure Transmitter (PS/PT/) of various ratings by fabrication and installing all the required pipe fittings with pressure pipes, valves, plugs, tees, nipples, junction box, cables etc., supply and erection of all other required materials such as the supporting structure clamps,cannopy, screws, nuts, bolts, aluminium sheets, GI wire,steel plats, cement concrete etc. complete in all respects including supply of suitable size non flame proof cable gland at control panel end and terminating the already laid cables at field, junction box and control panel end as per the drawings, specifications and directions of the engineer in-charge/site engineer including cost of all labour, materials, consumables, tools, tackles and services rendered etc. All the instruments shall have to be properly connected to the earth pit through GI wires. The works shall include labelling, tagging using SS plates, glanding and ferruling at both field and panel side. Installation to be done as per OEMs recommendations, vendor drawings and other approved drawings. The scope also shall inlcude calibration of instruments, hudrotesting of impluse tube,provding assistace in testing and commissioning of the instrument to the control system vendor alogn with loop cheking etc. | Item 160 | 7 | No. |
| 17 | 170 | Service | Item 170 | ||
| 18 | 180 | Uninstallation of existing CS/MS/SS Tubing & installation of new SS Tubing (1/2\" OD tube (SS316)) & connection to previously connected pressure instrument (PI/PT/DPT/PS etc) & manifold etc, including installation of following fittings as may be required:\n\nA. Male Connector(1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) OD Tube)\nB. Female Connector (1/2\" (12.7mm) FNPT X 1/2\" (12.7mm) OD Tube)\nC. Union TEE (3 X 1/2\" (12.7mm) OD Tube connection)\nD. Tube End Cap (For 1/2\" (12.7mm) OD Tube Connection)\nE. Plug (1/2\" (12.7mm) MNPT)\nF. Hex Nipple (1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) MNPT X 80mm )\nG. Excess Flow Valve (1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) OD Tube)\nH. Seal Chamber (3 x 1/2\" NPTF)\nI. 90 Deg Elbow 12.7 MM (1/2\" FNPT) X 12.7 MM (1/2\" FNPT) - SS316\n\nSupply of SS fittings & SS Tubing will be in scope of IOCL. Testing & rectification of any leakage. Arrangement of necessary skilled & unskilled manpower, supervision, tools & tackles, vehicle, supply of all sorts of consumables including nuts, bolts, clamps, Teflon etc. shall be in contractor’s scope.The job shall be carried out as per direction of Engineer-in-charge. Modification of existing support/manifold/process line if required to fix the existing instrument in the existing support/manifold/process line shall also be in the scope of contractor. It includes any type of job like bending of tube/welding of tube or pipe/incorporation of new tube or pipe to complete the job. | Item 180 | 792 | Meter |
| 19 | 190 | Replacement of existing Seal chamber by new seal chamber & connection to previously connected pressure instrument (PI/PT/DPT/PS etc) / tappings etc, including installation of following fittings, if required:\n\nA. Male Connector(1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) OD Tube)\nB. Female Connector (1/2\" (12.7mm) FNPT X 1/2\" (12.7mm) OD Tube)\nC. Union TEE (3 X 1/2\" (12.7mm) OD Tube connection)\nD. Tube End Cap (For 1/2\" (12.7mm) OD Tube Connection)\nE. Plug (1/2\" (12.7mm) MNPT)\nF. Hex Nipple (1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) MNPT X 80mm )\nG. Excess Flow Valve (1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) OD Tube)\nH. Seal Chamber (3 x 1/2\" NPTF)\nI. 90 Deg Elbow 12.7 MM (1/2\" FNPT) X 12.7 MM (1/2\" FNPT) - SS316\n\nSupply of SS fittings & needle valve / 3 way manifold/seal chamber will be in scope of IOCL. Testing & rectification of any leakage. Modification of existing base plate to fit the clamps etc will be in contractor's scope. Arrangement of necessary skilled & unskilled manpower, supervision, tools & tackles, transporting vehicle, supply of all sorts of consumables including Teflon, clamps, nuts, bolts etc. shall be in contractor’s scope.The job shall be carried out as per direction of Engineer-in-charge. Modification of existing support/manifold/process line if required to fix the existing instrument in the existing support/manifold/process line shall also be in the scope of contractor. It includes any type of job like bending of tube/welding of tube or pipe/incorporation of new tube or pipe to complete the job. | Item 190 | 15 | No. |
| 20 | 200 | Replacement of existing Needle Valve / 3 Way Two Valve Manifold by new Needle Valve (2 x 1/2\" NPTF) / 3 Way Two Valve Manifold (3 x 1/2\" NPTF) & connection to previously connected pressure instrument (PI/PT/DPT/PS etc) / tappings etc, including installation of following fittings, if required:\n\nA. Male Connector(1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) OD Tube)\nB. Female Connector (1/2\" (12.7mm) FNPT X 1/2\" (12.7mm) OD Tube)\nC. Union TEE (3 X 1/2\" (12.7mm) OD Tube connection)\nD. Tube End Cap (For 1/2\" (12.7mm) OD Tube Connection)\nE. Plug (1/2\" (12.7mm) MNPT)\nF. Hex Nipple (1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) MNPT X 80mm )\nG. Excess Flow Valve (1/2\" (12.7mm) MNPT X 1/2\" (12.7mm) OD Tube)\nH. Seal Chamber (3 x 1/2\" NPTF)\nI. 90 Deg Elbow 12.7 MM (1/2\" FNPT) X 12.7 MM (1/2\" FNPT) - SS316\n\nSupply of SS fittings & needle valve / 3 way manifold will be in scope of IOCL. Testing & rectification of any leakage. Modification of existing base plate to fit the clamps etc will be in contractor's scope. Arrangement of necessary skilled & unskilled manpower, supervision, tools & tackles, transporting vehicle, supply of all sorts of consumables including Teflon, clamps, nuts, bolts etc. shall be in contractor’s scope.The job shall be carried out as per direction of Engineer-in-charge. Modification of existing support/manifold/process line if required to fix the existing instrument in the existing support/manifold/process line shall also be in the scope of contractor. It includes any type of job like bending of tube/welding of tube or pipe/incorporation of new tube or pipe to complete the job. | Item 200 | 223 | No. |
AI Tender Summary
Tender Timeline
Jul 25, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 09, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 10, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
Completed