Airports Authority Of India has published Augmentation Of Power Supply System At Johat Airport - Construction Of Indoor Sub Station. Submission Date for this Tender is 05-08-2019. Power Supply Unit Tenders in Jorhat Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),i/c dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | item1 | 100 | Sqm |
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), i/c dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil | item2 | 93 | Cum |
| 3 | 3 | Supplying and filling in plinth with sand under floors, i/c watering,ramming, consolidating and dressing complete. | item3 | 47 | Cum |
| 4 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : \na) 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | item4 | 42 | Cum |
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : \nb) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | item5 | 1 | Cum |
| 6 | 6 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, i/c necessary excavation, levelling & dressing & finishing the top smooth. | item6 | 70 | Sqm |
| 7 | 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | item7 | 11 | Cum |
| 8 | 8 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform | item8 | 125 | Sqm |
| 9 | 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars | item9 | 1100 | Kg |
| 10 | 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:\nCement mortar 1:6 (1 cement : 6 coarse sand) | item10 | 77 | Cum |
| 11 | 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | item11 | 50 | Cum |
| 12 | 12 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | item12 | 3 | Sqm |
| 13 | 13 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,i/c cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | item13 | 720 | Kg |
| 14 | 14 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, i/c the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover. | item14 | 25 | Sqm |
| 15 | 15 | Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area | item15 | 25 | Sqm |
| 16 | 16 | Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by EIC, (area of grill to be measured). | item16 | 8 | Sqm |
| 17 | 17 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | item17 | 80 | Kg |
| 18 | 18 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | item18 | 7145 | Kg |
| 19 | 19 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | item19 | 1885 | Kg |
| 20 | 20 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :\n 4.0 mm thick glass panes | item20 | 10 | Sqm |
| 21 | 21 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, i/c cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | item21 | 286 | Sqm |
| 22 | 22 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | item22 | 321 | Sqm |
| 23 | 23 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | item23 | 50 | Metre |
| 24 | 24 | Providing & fixing false ceiling at all height i/c providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, i/c fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, i/c fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, i/c jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture’s specification and also i/c the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. | item24 | 55 | Sqm |
| 25 | 25 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | item25 | 225 | Sqm |
| 26 | 26 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) | item26 | 225 | Sqm |
| 27 | 27 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) | item27 | 15 | Sqm |
| 28 | 28 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coat on new work. | item28 | 190 | Sqm |
| 29 | 29 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer | item29 | 190 | Sqm |
| 30 | 30 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). | item30 | 175 | Sqm |
| 31 | 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | item31 | 220 | Sqm |
| 32 | 32 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | item32 | 70 | Sqm |
| 33 | 33 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required i/c consolidation finishing and tamping complete | item33 | 12 | Cum |
| 34 | 34 | Providing, laying and jointing glazed stoneware pipes class SP-1with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete : 100 mm diameter | item34 | 50 | Metre |
| 35 | 35 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes i/c bed concrete as per standard design : 100 mm diameter S.W. pipe | item35 | 50 | Metre |
| 36 | 36 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. | item36 | 1 | Each |
| 37 | 37 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, i/c necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required i/c cleat angle, Aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For Fixed Portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | item37 | 100 | Kg |
| 38 | 38 | For shutters of doors, windows & ventilators i/c providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required i/c the cost of EPDM rubber /neoprene gasket required (Fittings shall be paid for separately) \nAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | item38 | 20 | Kg |
| 39 | 39 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.\nPre-laminated particle board with decorative lamination on one side and balancing lamination on other side | item39 | 20 | Sqm |
| 40 | 40 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item): \nWith float glass panes of 4.0 mm thickness | item40 | 10 | Sqm |
| 41 | 41 | SH: Electrical Works\nWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.(Group - B) | item41 | 32 | Point |
| 42 | 42 | Wiring for light/power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required | item42 | 150 | Meter |
| 43 | 43 | Wiring for light/power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. | item43 | 150 | Meter |
| 44 | 44 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.\n2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | item44 | 200 | Meter |
| 45 | 45 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,i/c providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required | item45 | 8 | Each |
| 46 | 46 | Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required | item46 | 8 | Each |
| 47 | 47 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. | item47 | 12 | Each |
| 48 | 48 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required | item48 | 15 | Each |
| 49 | 49 | Supplying and fixing of 12 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | item49 | 1 | Each |
| 50 | 50 | Supplying and fixing of 8 way (4 + 24), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | item50 | 1 | Each |
| 51 | 51 | Supplying and fixing of 100 A rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. | item51 | 1 | Each |
| 52 | 52 | Supplying and fixing of 40 A rating, double pole, 240 V,MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. | item52 | 1 | Each |
| 53 | 53 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.\nSingle pole | item53 | 22 | Each |
| 54 | 54 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.\nDouble pole | item54 | 2 | Each |
| 55 | 55 | Supplying and drawing of following pair FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.\na. 10 Pair, 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable | item55 | 80 | Meter |
| 56 | 56 | Supplying and drawing of following pair FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.\nb. 4 Pair, 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable | item56 | 200 | Meter |
| 57 | 57 | Supplying and fixing following size/modules, GI box along with modular base and cover plate for modular switches in the recess etc as required.\n1 or 2 Module (75 mm X 75 mm) | item57 | 5 | Each |
| 58 | 58 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box i/c conenctions but excluding modular plate etc as requried\nTelephone socket outlet | item58 | 5 | Each |
| 59 | 59 | Supply, Installation, testing and commissioning of 10 pair telephone distribution board in a M. S. box with hinged cover/door complete with krone type tag block with double jumpering facility mounted on a bakelite sheet etc. including terminations of cable as required. | item59 | 1 | Each |
| 60 | 60 | Supplying and fixing of following sizes of steel conduit alongwith the accessories in surface/ recessed including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:\n20 mm | item60 | 120 | Meter |
| 61 | 61 | Supplying and fixing of following sizes of steel conduit alongwith the accessories in surface/ recessed including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:\n25 mm | item61 | 80 | Meter |
| 62 | 62 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray with perforation not more than 17.5%, in convenient sections, joined with connectors, horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.\n300 mm width x 50mm depth x 1.6 mm thickness | item62 | 50 | Meter |
| 63 | 63 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray with perforation not more than 17.5%, in convenient sections, joined with connectors, horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.\n150 mm width x 50mm depth x 1.6 mm thickness | item63 | 30 | Meter |
| 64 | 64 | Supply of 20W ±10% (nominal) Surface/Wall mounted LED batten, extruded aluminium housing including integrated electronic driver, polycarbonate diffuser etc prewired, suitable for operations at 230+/-10% Volts, 50 Hz., PF>=.95 complete as required. (Havells, Model No. ENDURALINEARNEOBS22WLED865SPCWH, Bajaj: BCLSBAL 20W CW or similar equivalent of approved makes) | item64 | 18 | Each |
| 65 | 65 | Supply of LED street light LED 25W ±10% (nominal) of minimum efficiency 95 Lumen/watt, luminaire IP65 including driver; heat sink, prismatic polycarbonate cover with individual LED lenses etc , 30-40mm OD for pipe bracket, PF>= 0.95prewired, suitable for operations at 230+/-10% Volts, 50 Hz. complete as required. (Havells Model No. ENDURAPEARLSL25WLED757SASYTOPC or similar equivalent of approved makes) | item65 | 8 | Each |
| 66 | 66 | Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting/ LED luminaire of all types, complete with all accessories and tube/lamp etc , directly on ceiling/wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. | item66 | 20 | Each |
| 67 | 67 | Supplying and Fixing of 32mm dia x 2.00 mtrs long GI pipe (medium class) bracket for mounting of flourescent/HPMV/HPSV/LED street light fitting on pole including bending the pipe in required shape, 2nos. 40mm x 3mm flat iron clamps with nuts and bolts and washer, painting the flat with primer and finish paint etc as required. | item67 | 5 | Each |
| 68 | 68 | Supply of '5 star rating 1200 mm sweep ceiling fan with double ball bearing, aluminium pressure die cast body with aluminium blades, canopies, hanging shackle, 30 cm downroad without speed regulator suitable for operations at 230+/-10% Volts, 50 Hz etc., complete as required. | item68 | 20 | Each |
| 69 | 69 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box i/c connections but excluding modular plate etc. as required. | item69 | 16 | Each |
| 70 | 70 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. | item70 | 16 | Each |
| 71 | 71 | Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required.(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) | item71 | 16 | Each |
| 72 | 72 | Supply of 300mm sweep 1400 rpm heavy duty exhaust fan suitable for 230V, 50 Hz AC supply complete with motor, capacitors, and all accessories as required. | item72 | 7 | Each |
| 73 | 73 | Supply of 450mm sweep 1400 rpm heavy duty exhaust fan suitable for 230V, 50 Hz AC supply complete with motor, capacitors, and all accessories as required. | item73 | 12 | Each |
| 74 | 74 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.\nUpto 450 mm sweep | item74 | 12 | Each |
| 75 | 75 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of 450/350mm sizes. | item75 | 12 | Each |
| 76 | 76 | Supply of 400 mm sweep wall fan with high speed motor for higher air delivery with AS blades, pull cord for speed and oscillation suitable for operations at 230+/-10% Volts, 50 Hz etc., complete as required. | item76 | 5 | Each |
| 77 | 77 | Supply of 450 mm sweep Pedestal fan with heavy duty motor, three blades, jerk free oscillation suitable for operations at 230+/-10% Volts, 50 Hz etc., complete as required. | item77 | 3 | Each |
| 78 | 78 | Supply, installation, testing and commissioning of micro processor based Fire Detection & Alarm panel having minium of two zones suitable for connecting sensors, mannual call points, operation on 220/230 volt, 50 Hz power supply, zone control cards, LED indicators to indicate fire and normal operation & power supply status, push button for accept and reset - 02 nos, maintance free bateries of 12 V, 7 Ah capacity and battery charger, etc. shall be complete as required. Panels shall have necessary provision for auto dialler ( UL listed) | item78 | 1 | Each |
| 79 | 79 | Supply and fixing of photoelectric Smoke detectors alongwith mounting base with unique sensing chamber, visible LED's, fully coated circuit boards with RF / transient protection, complete with all accessories i/c connections of etc. as required. ( UL listed) | item79 | 35 | Each |
| 80 | 80 | Supply and fixing of photoelectric Heat detectors alongwith mounting base with unique sensing chamber, visible LED's, fully coated circuit boards with RF / transient protection, complete with all accessories including connections of etc. as required. ( UL listed) | item80 | 4 | Each |
| 81 | 81 | Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. | item81 | 2 | Each |
| 82 | 82 | Supply and fixing of the following fire detection and alarm accessories complete with connections etc. as required.\nFire alarm speaker medium intensity (4W) with LMT in enclosure. | item82 | 2 | Each |
| 83 | 83 | Industrial grade outdoor weather proof horn (15W) made out of die cast aluminium alloy with driver unit suitable for operation on 100 V signal. | item83 | 1 | Each |
| 84 | 84 | Electronic response indicator in aluminium housing. | item84 | 5 | Each |
| 85 | 85 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. | item85 | 600 | Meter |
| 86 | 86 | Earthing with G.I. pipe 4.5 mtr long, 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal or coke and salt as required. | item86 | 2 | Set |
| 87 | 87 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. | item87 | 75 | Meter |
| 88 | 88 | Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing along with existing surface/cables/conduits/wiring etc as required. | item88 | 25 | Meter |
| 89 | 89 | Supply and laying of 110mm(OD), PE100, PN 6 HDPE pipe across the road crossing through Horizontal Directional Drilling (HDD) method, trenchless technology i/c providing test pilot & pilot drilling below 2.5 meter to 6 meter, reaming pulling the pipe i/c jointing of pipes, providing & drawing of ropes etc., from existing Sub-station yard to 11KV DP structure near main gate for laying of 11KV HT cable etc., complete as required and as per direction of E.I.C. | item89 | 150 | Metre |
| 90 | 90 | Supply, installation, testing & commissioning of 900VA (min) Inverter with sin wave output, MOSFET/IGBT based PWM technology,single phase input (160V-230V), and single phase output (230 V ± 5%,50 ± 1 Hz ), i/c provision of short circuit protection and display of electrical parameters along with 01No. 12V, 180AH lead acid tubular battery confirming to IS:13369, battery terminals, connecting leads and trolley enclosure made out of CRCA sheet along with as per specifications complete as required. | item90 | 1 | Each |
| 91 | 91 | Numbering of ceiling fan/ exhaust fan/ LED fittings/street light poles/water coolers as required. | item91 | 65 | Each |
| 92 | 92 | Supply, Installation, Testing & Commissioning of 15Ltr (min) water flow Reverse Osmosis (RO) online water filter cum purifier with min five stage purification of pre-filter, anti-scale, pre-carbon filter, sediment filter, RO membrance, UV etc., including 8ltr (min) RO water storage capacity tank with suitable stand and 10 inch external iron removal filter and suitable for operation on 230 volts +/- 10%, 50 Hz single phase AC supply complete with all accessories as required (Eureka Forbes, Kent, Blue Star or Equivalent) | item92 | 4 | Each |
| 93 | 93 | SITC of 15 Litres storage water Heater, 3 star (min) suitable for operation in 230V, 50 Hz AC supply including all accessories as required.(Make: Havells/crompton or equivalent) | item93 | 2 | Each |
| 94 | 94 | Supply of 2000W Room Heater suitable for operation in 230V, 50 Hz AC supply i/c all accessories as required.(Make: Havells/crompton or equivalent) | item94 | 4 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
