Military Engineer Services-MES has published Tender For Camouflaging And External Painting To Bldgs In Smq , Messes And Billets In Domestic Area At Af Stn Jaisalmer. Submission Date for this Tender is 05-08-2019. Painting Tenders in GE AF JAISALMER Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of roof, floor (other than ground floor), beams, staircase, landing, chhajja and silmilar work. | 2.5 | Cum | |
| 2 | 2 | M&L for reinforced cement concrete (1:2:4) type B-0 (using 12.50mm graded granite stone aggregate) in chhajjas. | 2.5 | Cum | |
| 3 | 3 | Rough finished flat form work to Chhajjs, chullah hoods, water troughs and similar items including edges and form work including necessary struts, scaffolding etc. | 50 | Sqm | |
| 4 | 4 | M&L for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar (1:3) and finished even and fair without using extra cement. | 100 | Sqm | |
| 5 | 5 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including welding with old bar, cranking, bending spirally for hooping for Chhajja, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips. | 240 | Kg | |
| 6 | 6 | Description all as per srl item No 5 above but 6mm to 8mm dia. | 60 | Kg | |
| 7 | 7 | Taking down cement plaster of any description, on brick or stone walls or ceiling etc. incl raking out joints, hacking for key, scrubbing down with water etc complete. | 1500 | Sqm | |
| 8 | 8 | M&L 15mm thick rendering in cement mortar (1:4) on fair faces of brick/stone or concrete surfaces, finished even and fair complete. | 1100 | Sqm | |
| 9 | 9 | Description all as per srl item No 8 above but 10mm thick in CM (1:4) on ceiling surfaces. | 100 | Sqm | |
| 10 | 10 | M&L 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick or concrete surfaces or stone masonry surfaces, finished even and fair complete. | 400 | Sqm | |
| 11 | 11 | M&L for preparation of new plastered surfaces and applying two coats of exterior emultion paint (Apex) over a coat of alkali resitant primer on surfaces of walls any colour as approved by GE | 300 | Sqm | |
| 12 | 12 | M&L for preparation of old decorated or unplastered surfaces by brooming down and steel wire brushing, scapping, down smoke soot, and grasy spot etc, and applying one coats of exterior emultion paint (Apex) on surfaces of wall any colour as approved by GE | 3000 | Sqm | |
| 13 | 13 | Description all as per srl item No 12 above but for applying two coats of exterion emultion paint (Appx). | 800 | Sqm | |
| 14 | 14 | M&L for preparation of new plastered surfaces and for applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls any colour as approved by GE | 800 | Sqm | |
| 15 | 15 | Description all as per srl item No 14 above but applying two coats of oil bound distemper. | 400 | Sqm | |
| 16 | 16 | M&L for preparation of old surfaces by washing, rubbing down and stopping of painted surfaces and for applying one coats of cement base paint (tinted) on surfaces of walls any colour as approved by GE. | 60000 | Sqm | |
| 17 | 17 | Description all as per srl item No 16 above but for applying two coats of cement base paint (tined). | 9600 | Sqm | |
| 18 | 18 | M&L for preparation of old decorated or unplastered surfaces by brooming down and steel wire brushing, scapping, down smoke soot, moulds, moss and efflorecent salts and for grasy spot etc, and applying one coats of white wash on walls incl all cornices etc. | 2200 | Sqm | |
| 19 | 19 | Description all as per srl item No 18 above but on ceiling | 1000 | Sqm | |
| 20 | 20 | M&L for preparation of newly plastered surfaces of ceilings and for applying three coats of white wash. | 100 | Sqm | |
| 21 | 21 | M&L for preparation of old painted wooden surface of wood based materials of any description, not otherwise described, over 10 cms widths or girth and for applying a one coat of synthetic enamel paint complete all as specified any colour as approved by GE | 2500 | Sqm | |
| 22 | 22 | M&L for preparation of old painted steel surface of any description over 10cm width or girth and applying a one coal of synthetic enamel paint complete all as specified any colour as approved by GE. | 1500 | Sqm | |
| 23 | 23 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high & 2.5cm width with thick synthetic enamel paint over and incl one base coat of synthetic enamel paint on plaster or concrete surface for writing of letter. | 500 | Per 10Nos (Per cm of hight) | |
| 24 | 24 | M&L for application of expoxy resin bonding agent with sikadur 32LP @ 0.5Kg /Sqm over old concrete surface complete all as specified and directed. Make SIKA/BASF | 50 | Sqm | |
| 25 | 25 | Hacking out old broken glass any thickness size quality or description from wooden/steel frames glazed with bonding/oil putty complete all as specified and directed. | 100 | Sqm | |
| 26 | 26 | S&F of steel glass of 3mm thick ordinary quality and glazing with oil putty/wooden beads in any size not exc. 0.5 Sqm in each panes. Complete all as specified and directed by Engr-in-Charge. | 80 | Sqm | |
| 27 | 27 | Description all as per srl item No 26 above but Pined glass (Frosted) | 20 | Sqm | |
| 28 | 28 | S&F in repair galvanised MS steel wire cloth 0.56mm nominal dia of wire and overage width of aperture 1.0mm fixed complete all as spfd & directed by Engr-in-Charge. | 100 | Sqm | |
| 29 | 29 | M&L for applying curing agent by brush/spray on concrete surface @ 0.5Kg/Sqm width Make SIKA Antisof EWP or equivalent grade of BASF/FOSROC complete all as spfd and directed by Engr-in-Charge. | 50 | Sqm | |
| 30 | 30 | M&L for applying a one coat of oil bound distemper on walls incl preparation of old surface complete all as spfd. | 8000 | Sqm | |
| 31 | 31 | Removing of rust from existing steel srufaces with rust removers of SIKA Rust off 100 applied in two coats @ 0.15Kg/Sqm per coat and cleaning all rust with steel wire brush and washed with water complete all as spfd and directed. | 50 | Sqm | |
| 32 | 32 | M&L for application of anti corressive coating with SIKA Rust off friazinc on the exposed reinforcement proper mix applied @0.25Kg/Sqm of exposed steel surface complete as per manufacturer's instructions complete all as spfd and directed Make SIKA/BASF. | 50 | Sqm | |
| 33 | 33 | Demolition of cement concrete unreinforced in groung floors and paving n.exc 15cm thickness (below or above ground level) un-reinforced | 55 | Cum | |
| 34 | 34 | M&L 100mm thick PCC (1:4:8) type D-2(using 40mm graded stone agg) as in paving finishing cement concrete surface fair and even without using extra cement complete all as spfd & directed by Engr-in-Charge. | 550 | Sqm | |
| 35 | 35 | M&L machine pressed precast concrete interlocking paver block with grey cement and with pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade over 25mm thick sand layer complete all as spfd & directed by Engr-in-Charge. | 250 | Sqm | |
| 36 | 36 | Dismentaling, floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spfd & directed by Engr-in-Charge. | 450 | Sqm | |
| 37 | 37 | M&L chequered cement concrete tiles 25mm thick, size 25cm x 25cm set, jointed and pointed in neat cement slurry with grey cement and pigment in floor over and including 15mm thick screed bed in CM (1:6) complete all as spfd & directed by Engr-in-Charge. | 250 | Sqm | |
| 38 | 38 | M&L for 10mm thick size 400mmx400mm coloured endura parking tiles over and incl 15mm thick screedbed in CM (1:6) complete all as spfd & directed by Engr-in-Charge. Make Orient bell/R Jhonson/Somany | 200 | Sqm | |
| 39 | 39 | Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting, drip moulds and similar work exc. 15cm but n.exc. 30cm in width or girth; incl cutting to edges, all mitres and stopped ends etc. | 100 | Rm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
