Construction Of Samaj Mandir At Subhanheti Tq . Ralegaon Dist . Yavatamal
Tender Value
8.90 Lakhs
Estimated cost
Bid Submission
05 Aug 2019
0 days left
EMD
9000
Bank guarantee accepted
Document Fee
224
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
RALEGAON → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Samaj Mandir At Subhanheti Tq . Ralegaon Dist . Yavatamal
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) | 28.72 | CUM | |
| 2 | 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) | 5.24 | CUM | |
| 3 | 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. | 18.79 | CUM | |
| 4 | 4 | Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum rtype mixer with SCADA with Natural / VSI standard Artificial Sand) | 9.56 | CUM | |
| 5 | 5 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of\nR.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand | 3.92 | CUM | |
| 6 | 6 | Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand | 4.2 | CUM | |
| 7 | 7 | Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand | 9.36 | CUM | |
| 8 | 8 | Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand | 0.5 | CUM | |
| 9 | 9 | Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand | 9.53 | CUM | |
| 10 | 10 | Finishing the terrece slab integrally mixed Sq.m \nwith water proofing compound in C.M. 1:3 with 12 mm thick layer including curing, finishing,using waterproofing compound as approved by Engineer-in-charge at the rate of 1 kg per bag of cement etc. complete.(Note : Item not to be used as waterproofing treatment over terreces.) | 79.45 | SQM | |
| 11 | 11 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. | 2.1056 | MT | |
| 12 | 12 | Providing second class Burnt Brick masonry with conventional/\nI.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. | 9.26 | CUM | |
| 13 | 13 | Providing second class Burnt Brick masonry with conventional/\nI.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete | 20.38 | CUM | |
| 14 | 14 | Providing and laying Cast in situ/Ready Mix cement concrete M 15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) | 1.55 | CUM | |
| 15 | 15 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of\n15 cm to 20 cm including watering and compaction etc. complete. | 18.9 | CUM | |
| 16 | 16 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. | 68.6 | CUM | |
| 17 | 17 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. | 110.34 | CUM | |
| 18 | 18 | Providing and applying Putty to new plastered surface in two coats to receiveapproved paint in all positions including all materials labour scaffolding and curing etc complete. | 178.04 | SQM | |
| 19 | 19 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of\n15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. | 160.29 | SQM | |
| 20 | 20 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. | 7.56 | SQM | |
| 21 | 21 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight\n0.547 kg/Rmt. and window frame bottom track section 61.85 x\n31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight\n0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight\n0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight\n0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. | 7.56 | SQM | |
| 22 | 22 | Providing & fixing Double leaf panelled door with PRESSED STEEL SHEET DOOR FRAME of size 60 mm x 105 mm and 1.25 mm Thick,shutter 35 mm thick as per detailed drawingconsisting C.C.T.W. vertical styles & top rail 100 mmx 35 mm & lock and bottom rail 200 mm x 35 mm & panel with 12 mm thick PARTCLE BOARD (Confirming I.S.3097 ) including stainless steel mat finish fixtures and fastenings & T.W. beading at junctions of panels inserted including three coats of oil painting with one coat of primer etc. complete. | 2.82 | SQM | |
| 23 | 23 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring | 66.2 | SQM | |
| 24 | 24 | Providing and applying washable acrylic emulsion paint of approved colour and shade to esisting surface in two coats including scaffolding, preparing the surfaces in receive paint including one primer coat etc. complete. | 178.04 | SQM | |
| 25 | 25 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. | 160.29 | SQM | |
| 26 | 26 | Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. | 160.29 | SQM | |
| 27 | 27 | Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and\nR.C.C beams or Column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete. | 15 | SQM | |
| 28 | 28 | Providing cement patta / band of 2.50 cm width on either side of edges of plaster for doors and windows including scaffolding\n,finishing, curing etc. complete. | 30 | SQM | |
| 29 | 29 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two\nM.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge | 1 | no | |
| 30 | 30 | royalty charges for various material include in item which are to be execute in the estimate. The charges are farmed as per the instruction given in SSR | 61.88 | 43.7 | CUM |
| 31 | 31 | Laboratory Testing Charges for testing of various material as per the instrction given in SSR \n cement 1) standerd constinsency fineness , sp. Gravity, setting time ( initial & final ) compressive strength, soundness | 1 | no | |
| 32 | 32 | COARSE AGGREGATE \nWater Absorpation Specific Gravity Impact Value Crushing Value | 1 | no | |
| 33 | 33 | Sieve Analysis | 1 | no | |
| 34 | 34 | Flakiness Index / Elongation Index | 1 | no | |
| 35 | 35 | FINE AGGREGATE \nFineness Modulus | 1 | no | |
| 36 | 36 | CONCRETE (For All grades ) \nCompressive strength of c.c.cube \nM-15 | 3 | no | |
| 37 | 37 | BRICKS Water Absorpation (SET OF 5 BRICKS) | 1 | no | |
| 38 | 38 | STEEL BAR \n(Tensile strength . % Elongation , Yield Stress, weight-per Meter, Bend/ Rebend Test Proof stress) | e`ssi | 1 | no |
AI Tender Summary
Tender Timeline
Jul 24, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 06, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender