Haryana Urban Development Authority-HUDA has published Supply Erection And Laying Of Fire Fighting Services With Wet Riser System Sprinkler Smoke Detector System Complete In All Respect And All Other Works Contingent Thereto Including One Year Defect Liability And One Year Mtc Free Of Cost. Submission Date for this Tender is 05-08-2019. Fire Fighting Service Tenders in Ambala Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | SUB HEAD NO-1 EXTERNAL FRE GYDRNT SYSTEM\n1.1) Providing and fixing gun metal single headed ISI marked oblique pattern hydrant landing valve with 80mm dia flanged inlet & 63mm dia female outlet complete with PVC/ rubber cap and GI chain twist release type plug and all accessories as per IS : 5290-1993 and all amended up to date Type A including fixing with anchor fasteners and flanged tapping from ring main and complete as required.Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001113 | 11 | each |
| 2 | 2 | 1.2) Providing Non-percolating flexible hose (RRL type -A) ISI marked (IS:636) 63mm dia x 15m long complete with instantaneous type SS 63mm dia. IS marked Male and Female couplings (IS:903) bound and rivetted to hose pipe with copper rivets and 1.5 mm copper wire. Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001114 | 22 | each |
| 3 | 3 | 1.3) Providing of standard size gun metal 63mm dia branch pipe with nozzle of 20mm nominal bore outlet as per (IS : 903-2008 all amended up to date ) suitable to fit with standard instantaneous type 63mm dia coupling ISI marked (IS:903-2008 all amended up to date ) complete.Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001115 | 11 | each |
| 4 | 4 | 1.4) Providing & fixing Gun-metal Fire Brigade connection (suction collecting head) consisting of 63mm dia instantaneous type male complete with Flanged outlet complete with bolts, nuts and rubber insertions as required as per IS : 904-1983.Make: Omex, Minimax and Life Guard\nFour way | BI01010001010000000000000515BI0100001116 | 1 | each |
| 5 | 5 | 1.5) Providing & fixing Gun-metal Fire Brigade connection suction Hose coupling (Draw-out Connection) with nut for female coupling as per IS: 902-1974 complete with 100mm dia .G.I Suction pipe and 100mm dia . 1No. C.I.Foot valve flanged (to be connected to static water tank ). Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001117 | 1 | each |
| 6 | 6 | 1.6) Providing & fixing Weather proof hose cabinets fabricated from 16g M.S sheet with full glass door and locking arrangement, suitable to accommodate 2 nos. 15m long hose and 1 no branch pipe. The cabinet shall be painted with ane coat of primer and finished stove enameled "Fire Red" , "Fire Hose " written on front including suitably mounted on a raised masonry platform as required. (Approx 0.75mx0.6mx0.25m). Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001118 | 11 | each |
| 7 | 7 | 1.7) Providing & fixing M.S cabinet(to enclose above .Draw -out /Fire brigade inletr connections) fabricated from 16g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitable masonry platform as required. (Approx 0.75mx0.6mx0.25m). Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001119 | 2 | each |
| 8 | 8 | 1.8) Supply, Installation,Testing& Commissioning Mild Steel black pipe(IS:3589,6mm thick) heavy class including cutting. Screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, reducers. Etc including excavation (upto1.5m deep of suitable width). Rubble soling, sand filling up to 3" above the pipe, back-filling with excavated earth, removal of surplus soil and providing anti - corrosive treatment (coating and wrapping) with 4mm thick tape and holiday test check as per IS: 10221 complete as required.Make: Jindal Hisar, Tata\n150mm dia | BI01010001010000000000000515BI0100001120 | 57 | P/Mtr |
| 9 | 9 | 100mm dia | BI01010001010000000000000515BI0100001121 | 12 | P/Mtr |
| 10 | 10 | 1.9) Providing and fixing slim seal Butterfly valves B190 Class (PN16) complete with matching flanges rubber insertion, nuts. Bolts and washer etc. of following sizes.Make: ZOLOTO CASTLE\n80mm dia | BI01010001010000000000000515BI0100001122 | 12 | each |
| 11 | 11 | 150mm dia | BI01010001010000000000000515BI0100001123 | 2 | each |
| 12 | 12 | 1.10) Supply, Installation, Testing & Commissioning Mild Steel black pipe(IS:3589,6mm thick) heavy class including cutting. Screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, reducers. Etc including cutting holes and chase in brick or RCC wall / slabs and making good the same to the approval of engineer / consultant complete including painting with one coat of primer and two or more coats of enamel paint of approved make and shade including steel work. Note: pipe upto and 50mm dia shall be threaded joints, above 50mm shall be welded joints.Make: Jindal Hisar, Tata\n150mm dia | BI01010001010000000000000515BI0100001124 | 314 | P/Mtr |
| 13 | 13 | 1.11) 80mm dia | BI01010001010000000000000515BI0100001125 | 11 | P/Mtr |
| 14 | 14 | Providing and fixing cast iron wafer type horizontal/vertical non return valve complete with flanges tested to 16 kg./m2.Make:ZOLOTO CASTLE\nFor 100mm dia pipes | BI01010001010000000000000515BI0100001126 | 1 | each |
| 15 | 15 | For 150mm dia pipes | BI01010001010000000000000515BI0100001127 | 2 | each |
| 16 | 16 | SUB HEAD NO-2 INTERNAL FIRE HYDRANT AND SPRINKLER SYSTEM\n2.1) Providing and fixing gun metal single headed ISI marked oblique pattern hydrant landing valve with 80mm dia flanged inlet & 63mm dia female outlet complete with PVC/ rubber cap and GI chain twist release type plug and all accessories as per IS : 5290-1993 and all amended up to date Type A including fixing with anchor fasteners and flanged tapping from ring main and complete as required.Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001128 | 5 | each |
| 17 | 17 | 2.2) Providing Non-percolating flexible hose (RRL type -A) ISI marked (IS:636) 63mm dia x 15m long complete with instantaneous type SS 63mm dia. IS marked Male and Female couplings (IS:903) bound and rivetted to hose pipe with copper rivets and 1.5 mm copper wire.Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001129 | 5 | each |
| 18 | 18 | 2.3) Providing of standard size gun metal 63mm dia branch pipe with nozzle of 20mm nominal bore outlet as per (IS : 903-2008 all amended up to date ) suitable to fit with standard instantaneous type 63mm dia coupling ISI marked (IS:903-2008 all amended up to date ) complete.Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001130 | 5 | each |
| 19 | 19 | 2.4) Providing & fixing of frist -Aid Fire Hose Reel wall mounting swinging type complete with drum, bracket,25mm dia. Ball valve ande 20mm dia x 3.65 m long high pressure Rubber Hose reel (Type 2) tubing as per IS: 444 with Gun - metal shut - off nozzel having 5mm dia orifice . The Hose Reel shall strictly confirming to IS:884-1985.Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001131 | 5 | each |
| 20 | 20 | 2.5) Providing & fixing MS hose door fabricated from 16g M.S sheet with full glass door and locking arrangement, suitable to accommodate 1 hydrant landing valve, 1 fire hose reel ,2 nos 15m long 63mm dia hose,1-branch pipe. The door shall be painted with one coat of primer and finished stove enameled "Fire Red"," Fire Hose" written on front as required.(Approx. Size 1.2mx 2.1m) Make: Omex, Minimax and Life Guard\nProviding and fixing slim seal Butterfly valves B190 Class (PN16) complete with matching flanges rubber insertion, nuts. Bolts and washer etc. of following sizes.Make:ZOLOTO CASTLE | BI01010001010000000000000515BI0100001132 | 5 | each |
| 21 | 21 | 2.6) Providing and fixing slim seal Butterfly valves B190 Class (PN16) complete with matching flanges rubber insertion, nuts. Bolts and washer etc. of following sizes.Make:ZOLOTO CASTLE\n\n80mm dia | BI01010001010000000000000515BI0100001133 | 5 | each |
| 22 | 22 | 2.6.2) 100 mm dia | BI01010001010000000000000515BI0100001134 | 5 | each |
| 23 | 23 | 2.6.3) 150 mm dia | BI01010001010000000000000515BI0100001135 | 1 | each |
| 24 | 24 | 2.7) Supply, installation, testing and commissioning of 15mm dia. Quartzite bulb type G.M Sprinkler head suitable to operate at 68 deg. C (UL/FM/LPC iisted/ approved) Make: Viking, Tayco, Omex\n\nStandard Pendant type in Brass finish | BI01010001010000000000000515BI0100001136 | 125 | each |
| 25 | 25 | 2.7.2) Standard Upright type in Brass finish | BI01010001010000000000000515BI0100001137 | 125 | each |
| 26 | 26 | 2.7.3) Standard Side Wall type in Brass finish | BI01010001010000000000000515BI0100001138 | 16 | each |
| 27 | 27 | 2.8) Supply, Installation, Testing & Commissioning of UL/approved metallic stainless steel (SS 304) flexible drop pipes of 25mm dia with rosset plate and cross bar assembly support suitable for grid ceiling , reducing fitting , special shoulder Nipple, reducing nipple ,T bar bracket , bracket clip assembly .Flexible length shall be upto 1200mm long.Make: Viking, HD, Omex | BI01010001010000000000000515BI0100001139 | 125 | each |
| 28 | 28 | 2.9) Providing and fixing of UL listed electrically operated flow indicating switch (vane type) of following diameter with threaded connection with flexible full bore paddle & NO/NC contact terminals as specified complete with all accessories and necessary wiring.Make: Viking, HD, Omex\nFor 100 dia line | BI01010001010000000000000515BI0100001140 | 5 | each |
| 29 | 29 | Supply, Installation, Testing & Commissioning Mild Steel black pipe(IS:1239 part-1) heavy class including cutting. Screwing, etc.and providing all fitting viz. flanges. Bends, tees, Elbow, Reducers, Clamps.Hangers, necessary supporting arrangement etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same to the approval of engineer / consultant complete including painting with one coat of primer and two or more coats of enamel paint of approved make and shade including steel work. Note: Pipes upto and 50 mm dia shall be threaded joints , above 50mm shall be welded joints.Make: Jindal Hisar, Tata and Surya.\nFor 150mm dia line | BI01010001010000000000000515BI0100001141 | 39 | P/Mtr |
| 30 | 30 | 100mm dia | BI01010001010000000000000515BI0100001142 | 52 | P/Mtr |
| 31 | 31 | 80mm dia | BI01010001010000000000000515BI0100001143 | 53 | P/Mtr |
| 32 | 32 | 65mm dia | BI01010001010000000000000515BI0100001144 | 51 | P/Mtr |
| 33 | 33 | 50mm dia | BI01010001010000000000000515BI0100001145 | 41 | P/Mtr |
| 34 | 34 | 25mm dia | BI01010001010000000000000515BI0100001146 | 388 | P/Mtr |
| 35 | 35 | 2.11) Providing & fixing of MS Conduit of 16 SWG ISI marked (IS:9537-1981 part - II) complete with all fitting viz. tees, bends, junction boxes, clamps/ supports etc.To be concealed in slabs/brick work as required or surface laid.Make: Havells\n25mm dia | BI01010001010000000000000515BI0100001147 | 20 | P/Mtr |
| 36 | 36 | 2.12) Providing & fixing 25mm dia. Inspecting & testing assembly (Test & Drain) with gunmetal valve gunmetal sight glass, bypass valve & connected to drain line.Make: Viking, HD, Omex | BI01010001010000000000000515BI0100001148 | 5 | each |
| 37 | 37 | 2.13)Providing & fixing 2 cast iron wafer type horizontal/vertical non return valve complete with flanges tested to 16 kg./m2. Make: Zoloto, Castlex\nFor 150mm dia | BI01010001010000000000000515BI0100001149 | 1 | each |
| 38 | 38 | 2.14) Providing & fixing 100mm diaburden type, stainless steel dial type pressure Gauge (0-16 kg) range , 3/8" BSP bottom entry on pump Delivery Line complete with Ball valveMake: H- GURU, Danforce, Viking | BI01010001010000000000000515BI0100001150 | 5 | each |
| 39 | 39 | 2.15) Supply & Fixing of fire Man's Axe with heavy Insulated rubber tested up to 20 KV and confirming to IS; 926Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001151 | 5 | each |
| 40 | 40 | 2.16) Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core in the existing surface / recessed steel/PVC conduit as required (make havels/polycab) \n2 x 1.5 sqmm | BI01010001010000000000000515BI0100001152 | 20 | P/Mtr |
| 41 | 41 | SUB HEAD NO-3 FIRE PUMP & ACCESSORIES\nSupply, Installation, Testing& Commissioning of Local Fire authority approved Electric Driven Main fire pump for sprinkler / Hydrant application suitable for automatic operation and consisting of following detail given as A,B,C,D,E,F and G (A) Horizontal Single / Multi stage Centrifugal End suction back pull type pump complete for delivery of below mentioned discharge , with necessary Butterfly valve on the suction side (all item to be matching with the suction side dia of the pump) and pressure gauge ,Butterfly valve and non-return valve on the delivery side (all item to be matching with the delivery side dia of the pump )and including bypass arrangement for Testing of pump. (B) Material of construction: pump Casing - cast iron, Impellor -Bronze, Shaft -SS 410, Packing - Mechanical Seal (C) pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65% of the rated head. The sgut off head shall not exceed 120% of rated head. (D) Squirrel cage induction motor suitable for 3 phase , 415 V , 50 HZ, Ac supply 2900 / 1450 RPM T.E.F.C confirming to IP:SS , of required HP suitable for the above pump along with flexible coupling guard complete in all respect.(E) Common bed plate fabricated from mild steel channel for installation of pump and motor. (F) Pump is to be inspected by third party like RITES/Pdil at manufacturer's premises and inspection report is to be submitted. (G) Suitable cement concrete foundation duly plastered with ant vibrationpads.Make: Kirloskar,\n2280 LPM suitable for 56 Mtr Head, multi stage ,2900 RPM | BI01010001010000000000000515BI0100001153 | 1 | set |
| 42 | 42 | SITE of local fire authority approved Diesel Engine drive Pump suitable for automatic operation as per discharge defined below consisting of the following details given as A,B,C,D,E and F (A) Horizontal single / Multi stage Centrifugal End suction , back pull type pump complete with necessary flexible pipe. Butterfly valve on the suction side (all item to be matching with the suction side dia of the pump) and pressure gauge. Butterfly valve and non-return valve on the delivery side side (all item to be matching with the delivery side dia of the pump) and including bypass arrangement for Testing of pump. (B) Material of construction: pump Casing - Cast Iron. Impellor- Bronze , Shaft -SS 410 , Packing - Mechanical Seal (C) Pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head (D) Radiator cooled Diesel Engine developing suitable BHP for the below mentioned discharge at 1500 / 1800 RPM, flexible coupling and coupling guard with the pump, common bed plate for mounting of the Engine and pump, Antivibration damping arrangement by cushy foot, Diesel Engine starting panel for starting of the engine automatically if the Normal electrical supply fail with a unit of battery bank of 12/24v,180 Ah , Lead Acid Battery with Boost/Trickle charger as required for operation of Diesel engine , Exhaust pipe of suitable diameter minimum 10M length , with muffler, day oil tank of 300 1ts capacity with first charge and hand operated oil pumping set.Make: Kirloska.\n2280 LPM suitable for 56 Mtr Head, multi stage , 2500 RPM | BI01010001010000000000000515BI0100001154 | 1 | set |
| 43 | 43 | 3.3) SITE of local fire authority approved Vertical multistage jockey pump with SS Body , SS impellor , SS shaft, mechanical seal coupled with squirrel cage induction motor for automatic operation suitable for three phase , 415 V , 50 Hz AC supply with synchronous speed of 2900 RPM, T.E.F.C type confirming to IP : 55 with flexible coupling and coupling guard with the pump, Common bed plate fabricated from mild steel channel , suitable cement concrete foundation duly plastered with ant vibrationpads.Make: Kirloskar.\n180 LPM Suitable for 56 Mtr. | BI01010001010000000000000515BI0100001155 | 1 | Set |
| 44 | 44 | 3.4) Supply , installation testing and commission of Adequate Pressure switch of approved make for Electric pump, jockey pump and Diesel Engine Driven pump including necessary wiring and cut off valve up to central panel & other material as described in specification (As per requirement ) | BI01010001010000000000000515BI0100001156 | 3 | each |
| 45 | 45 | Providing ,fixing , testing and commissioning of recharged air vessel ( Size 250 mm dia& 1200 mm height ) fabricated shell from 8mm thick & dished end 10 mm thick M.S plate for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design/ requirement ) with valve to operate as per operating sequences including 25mm dia drain valve , air release valve with ball cock on top, 80 mm dia flanged inlet with isolating valve duly painted from inside and out side complete as required.Make: Kirloska | BI01010001010000000000000515BI0100001157 | 1 | each |
| 46 | 46 | 3.6) Providing ,fixing , testing and commissioning of stainless steel strainer of dia given below fabricated out of 1.6 mm thick stainless steel sheet with 3mm. Dia holes with stainless steel flange of following sizes. Make: Emerald Zoloto.\n150mm dia nominal bore | BI01010001010000000000000515BI0100001158 | 2 | each |
| 47 | 47 | 3.7) Providing, fixing , exhaust , Diesel engine driven pump exhaust M.S pipe class 'C' 150 mm dia including fitting like flanges , bends, reducers , etc . 50mm thick fibber wool insulation aluminum cladding , 22 gauge , necessary excavation, fixing of silencer connections at engine exhaust , necessary support , back filling, cutting and making good , bird proof and weather proof flap complete in all respect as directed.Make: Jindal | BI01010001010000000000000515BI0100001159 | 6 | P/Mtr |
| 48 | 48 | 3.8) Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end)Make:Danfoss Kirloskar kartar\n25mm dia | BI01010001010000000000000515BI0100001160 | 2 | each |
| 49 | 49 | SUB HEAD No-4 PROTABLE CHEMICAL FIRE EXTINGUISHERS & SIGNAGES.\nProviding, fixing, Carbon-di-oxide fire extinguishers consisting of welded M.S cylindricalbody.squeeze lever discharge valve fitted with internal discharge nozzle, suspension bracket , confirming to IS : 15683 - all amended up to date finished externally with red enamel paint and fixed to well with brackets with raw plug/dash fasteners complete with internal charge.Make: Omex, Minimax and Life Guard.\n4.5 kg | BI01010001010000000000000515BI0100001161 | 26 | each |
| 50 | 50 | 4.2) Supply and installing ABC (Power Type ) Fire Extinguisher HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate ) pressured by Nitrogen complete in all respects including wall suspension bracket and confirming braket and confirming to IS : 13849-1993.Make: Omex, Minimax and Life Guard.\n6.0 Kg | BI01010001010000000000000515BI0100001162 | 26 | each |
| 51 | 51 | 4.3) Supply and installing ISI marked under (IS: 13386) 50 ltr. Capacity mechanical foam trolly mounted mobile fire extinguisher complete with braided discharge hose and intial charge of AFFF (Aquous Film Forming Foam) for D.G . SetMake: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001163 | 2 | each |
| 52 | 52 | 4.4) Supply and installing of fire bucket stand including sheet metal (16 gauge ) shade, platform and associated civil works for 4 Nos. bucket each set.Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001164 | 2 | each |
| 53 | 53 | 4.5) Supply and installing testing and commissioning of Exit Signage of photo luminescent on aluminum sheet of 1.0 mm (+10%) containing lumigen -III as base chemical covered with U/V stabilized coating lumigen-III as base chemical , with U/V stabilized coating size 450x200.Make: Omex, Minimax and Life Guard | BI01010001010000000000000515BI0100001165 | 7500 | Sqinch |
| 54 | 54 | SUB HEAD No-5 ELECTRICAL WORKS\nFIRE ELECTRICAL CONTROL PANEL\nProviding & Fixing testing & commissioning of cubical type floor mounted fire control panel fabricated FROM 16G MS sheet dully painted with stove enameled finish of approved shade and comprising of as per drg. of panel attached.\nA. One incoming 250-amp TPN fuse switch unit . TNP bus bar voltmeter selector switch and indicating lighting.\nB. One 160 amp isolation fuse switch unit FOR MAIN PUMP.\nC.One 63 - amp fuse switch unit . With 63 amps HRC fuse\nD. One fully automatic star delta starter suitable for main pump motor with over load relay timer. Push buttons and auto manual selector switch.\nE.One fully automatic star delta starter suitable for jockey pump motor with overload relay timer push buttons and auto manual selector switch.\nF.One fully automatic star delta starter suitable for terrace pump motor with overload relay timer push buttons and auto manual selector switch.\nG.Three phase indicating lamps.\nH.Two panel type Ampere meter one for each motor with. ASS,CTS etc.\nI. Two neon indicating lamps one for each motor.\nii. Earthing of all 2Nos Motor, Diesel Engine and Panel through GI 25mm x 5mm strip with earthing pit as required with charcoal, sall etc. | BI01010001010000000000000515BI0100001166 | 1 | each |
| 55 | 55 | CABLE Tray\n6.1) Fabricating and installing following size of perforated M.S cable trays including horizontal and vertical bends reducers, tees cross members and other accessories as required and duly suspended from the ceiling from the ceiling with M.S suspenders and including painting etc. as required \n200mm x 50mm x 2mm thickness | BI01010001010000000000000515BI0100001167 | 12 | P/Mtr |
| 56 | 56 | 150mm 50mm x 2mm thickness | BI01010001010000000000000515BI0100001168 | 12 | P/Mtr |
| 57 | 57 | 100mm 50mm x 2mm thickness | BI01010001010000000000000515BI0100001169 | 12 | P/Mtr |
| 58 | 58 | CABLE\nSupplying and making end termination with brass compression gland and aluminum lugs for following sizes of XLPE insulated PVC aluminum conductor cable of 1.1 KV grade as required.\n3CX35sq .mm ( From Fire Fighting Control Panel to main fire pump) | BI01010001010000000000000515BI0100001170 | 40 | P/Mtr |
| 59 | 59 | 3CX16sq .mm ( From Fire Fighting Control Panel to jocky fire pump | BI01010001010000000000000515BI0100001171 | 30 | P/Mtr |
| 60 | 60 | 3 x 2.5 sq .mm ( From Fire Fighting Control Panel for flow Switches and pressure Switches) | BI01010001010000000000000515BI0100001172 | 40 | P/Mtr |
| 61 | 61 | FIRE ALARM SYSTEM\nSITC of 1 loop expandable upto 3 loops 4.3” diagonal color touchscreen LCD with separate status LEDs FACP (Fire Alarm Control Panel). FACP should have total point capacity of 250 points.\nMake: Siemens/Tyco Simplex | BI01010001010000000000000515BI0100001173 | 1 | each |
| 62 | 62 | SITC of Smoke Sensor (Photoelectric Optical Smoke) detector with base.\nSITC of Intelligent Addressable Optical Smoke detector with base. The optical sensor element shall have multiple selectable sensitivity levels from 0.2% Obs/ft to 3.7% Obs/ft. The detector shall have operating temperature range from -9°C to 50°C and humidity tolerance range up to 95% RH, Non-Condensing.Make: Siemens/Tyco –Simplex | BI01010001010000000000000515BI0100001174 | 101 | each |
| 63 | 63 | SITC of Indoor Application ManuaCall Points\nSITC of Intelligent Addressable Double Action Indoor Application Manual Pull Stations / Manual Call Points suitable for wall/column mounting. MCP shall have red coloured housing with molded, raised-letter operating instructions of contrast colour. The MCP shall latch mechanically upon operation and shall remain so until manually reset with its key by an authorized operator. The MCP shall have operating temperature range from 0°C to 50°C and humidity tolerance range up to 93% RH, Non-Condensing.Make: Siemens/Tyco –Simplex/Honeywell -Morley | BI01010001010000000000000515BI0100001175 | 12 | each |
| 64 | 64 | 11.1) SITC of Addressable Notification Appliances - Hooter with Strobe\nSITC of Addressable Notification Devices (Hooter with Strobe). Hooter with Strobe unit shall sit\ndirectly on addressable NAC (Notification Appliance Circuit) of FACP, fully supervised and\npowered from FACP. Hooter and Strobe elements of the combined unit shall have independent activation & deactivation criteria. Hooter shall stop at alarm "Acknowledge" and the Strobe shall stop at panel "Reset". and selected from the FACP. Make: Siemens/Tyco –Simplex | BI01010001010000000000000515BI0100001176 | 12 | each |
| 65 | 65 | 12.1) SITC of Short Circuit Isolator\nSITC of Intelligent Addressable, Supervised Short-Circuit Isolator. The Isolator Monitor Module shall have operating temperature range from 0°C to 49°C and a humidity tolerance of up to 90% RH, Non-Condensing. (make-siemen’s/tyco-simplex) \n | BI01010001010000000000000515BI0100001177 | 5 | each |
| 66 | 66 | 13.1) Cable\nSITC of 2-Core, Copper Conductor, Multi-Strand, PVC insulated, Armoured, UTP (Unshielded Twisted Pair), FRLS Cable. (Make Ticmew/simplex) | BI01010001010000000000000515BI0100001178 | 620 | P/Mtr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
