Hll Lifecare Limited-HLL has published Civil And Electrical Works For Construction Of Modular Operation Theatre At Govt . Taluk Hospital , Thiruvalla Pathanamthitta. Submission Date for this Tender is 30-07-2019. Civil Work Tenders in Thiruvalla, Pathanamthitta Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | Civil Work | |||
| 2 | 1.01 | EARTH WORK | |||
| 3 | 1.02 | OTFS : Our OTFS is a unique system, extensively used in Specialty OT and or in critical application, where high level of filtration is mandatory as per ISO 14644. To maintain a cooling effect / controlling the temperature & Relative Humidity, DX condensing unit is being used with Humidity control sensors and equipment’s. Re-cycled air with induction of 25% fresh air is considered. Positive pressure in the room will be 20 TO 25 Pascal’s. We have considered maximum 44 Deg C temperature at outside / atmosphere during the summer, whereas inside heat load – Six personnel and two light of 60 watts and your requirement of temperature inside the OT 21 Deg C (± 2 Deg C). Hence accordingly heat load is being calculated for every OTFS/CRFS/AHU. | 1 | JOB | |
| 4 | 1.03 | SS 304 LAMINAR AIR FLOW PLENUM FOR OT : Continuous welded rigid panel support with twin joints to superior finish will; be provided with provision for pendent sixing will be given in the middle of the plenum. The Plenum will be covered with H13 / H 14 Grade Imported HEPA Filters for unidirectional flow across the Surface. On the Bottom side Perforated Tablet Perforated Stainless steel Grill will be provided as cover. The cover could be easily removed when required. (8’ x 8’). The casing of the HEPA Filter will be made out of Aluminium. Media made out of Micro fibre glass paper and the bonding will be of PU resin. Fins will be Aluminium fins – blended type. Poly ethylene Gasket will be provided. Pressure Drop will be Within 25mm WC . Performance Efficiency will be 99.997% and Grade will be H 13 / H 14 & Penetration - 0.3 sub micron. The Suspended Laminar Air Flow (LAF) provides ultra sterile CLASS 100 clean air and is designed CLASS 5 of ISO 14644-1 Standards. | 1 | SET/JOB | |
| 5 | 1.04 | SS 304 RISER : It is made out of outer side pre powder coated inner side SS 304 with 50mm thick PUF panel shall be provided. | 4 | Nos | |
| 6 | 1.05 | FULL 304 SS GRADE CEILING PANELING : Supply fabricating & fixing of full 304 SS Sheet/Panels. The supporting frame / sub frame shall be of aluminium hollow section. Ceiling Sheelt/panelling system with 304 SS grade steel, Approxmately 0.8 mm thick sheet, mounted on substructure, easy to remove with air –tight finish. Sheet should be covered with protective sheath to prevent scratch during installation. Corners should be one sheet bent to avoid corner joints Minimum junction, Seamless junction. Durable, Conductive / antistatic, Fire retardant | 570 | Sq.ft | |
| 7 | 1.06 | FULL SS 304 WALL SHEET/PANELING : Supply of Modular SS fabricating & fixing Stainless Steel Modular Sheet/Panel with 304 grade steel, Approxmately 1 mm to 1.2 mm thick sheet, mounted on substructure, easy to remove with air –tight finish. Panel should be covered with protective sheath to prevent scratch during installation. Corners should be one sheet bent to avoid corner joints Minimum junction Seamless junction. Durable, Conductive / antistatic Fire retardant, Resistant to commonly used detergents as per standards, Pass through cabinets for incoming sterile Antibacterial surface Radiation protection in walls and doors for all type of surgeries like General surgery/Orthopaedic/Neurosurgery/Urology/ENT/Trauma etc., | 675 | Sq.ft | |
| 8 | 1.07 | ANTI STATIC EPOXY FLOORING : Providing & laying one piece, seamless flawless & laminated FRP flooring of 5mm average thickness in operation, theatre with three layers of 450gsm Glass Fiber & Epoxy class resin and top coat will be completed. The flooring will be provided with copper grid at bottom using 20mm wide x 30 SWG copper strip (laying 2m x 2m Length and Width) and there will be curved skirting of 3 inch radius ending flush with stainless steel wall. The flooring will be anti-static and conductive to high frequency static charge. | 570 | Sq.ft | |
| 9 | 1.08 | SS 304 SWING DOOR : Supplying, fabricating & fixing of manual swing SS door with Dorma mechanism. It is provided with handle and lock. There will be vision panel. Stainless Steel “ D” type of handles on pull side will be provided. The filler material with will High Density Puff/Composite panel | 2 | Nos | |
| 10 | 1.09 | DAIKIN CONDENSING UNIT : Supply of 8.5 TR capacity air cooled scroll condensing unit with Hermetic compressors and eco-friendly Refrigerant. All the copper line distribution with Drier, Shut off valves, Expansion valve, etc. | 1 | Nos | |
| 11 | 1.1 | PENDANT : Articulated Arm – 1000mm, Basic Console – 800mm Single Shelf 470mm x 360 x 30mm, IV Poles set (tube + 4 bottle holding tube. Main Socket (6/16A single phase) . Medical gas terminal & Hose assembly). Medical Rail – One set | 1 | Nos | |
| 12 | 1.11 | WRITING BOARD : Writing Board of size840 x 640mm comprises of a push mounted. 1.50mm thick white laminate board, bonded to a 10mm high density fiber board sheet for additional rigidity. | 1 | Nos | |
| 13 | 1.12 | X-RAY VIEWER : Twin plate x-ray viewing LED screen designed to provide a high level of control luminance. | 1 | Nos | |
| 14 | 1.13 | MAGNEHELIC GAUGE : Differential pressure(+ve)monitor gauge with nozzles | 1 | Nos | |
| 15 | 1.14 | Hermetically Sealed Pass box(600 x 600 x450mm) : Hermetically sealed pass box with inter locking system and U/V light control system | 1 | Nos | |
| 16 | 1.15 | SURGEONS CONTROL PANEL : The control panel with consist of Digital real time and elapse clock, lighting system control, Temperature and Humidity indicator, surgical light controls, Medical gas alarm, etc. and other accessories. | 1 | Nos | |
| 17 | 1.16 | SS 304 SCRUBBER STATION : Operation theatre fabricated from 18 SWG 304 type stainless steel welded, polished to mat finish including connecting to drainage and water points and making good cuttings wall size (L :4’ H: 3’ x W : 24”, drain outlet, 2 tap elbow operated, “T” connector 2 Nos, ½” tap connector and water joing connector 4 Nos., 12mm flexible PVC pipe 5 Mtr anchor fasten floor mounted 4 Nos., | 2 | Tap Set | |
| 18 | 1.17 | DUCTING & INSULATION : Supply, installation, testing and balancing of air distribution System consists of factory fabricated Galvanized Iron sheet metal ducting with TDF/TDC flanges complete with supports (anchor fasteners and tie-rods, cradles, angle iron supports, GI bolts and nuts, 4mm thick self-adhesive neoprene rubber gasket, stiffeners, zinc chromate painted angle iron flanges, chipping and plastering of openings made for duct supports etc., filling the gap with fibre glass wool and with sealant complete as per specification. The rates quoted shall include turning vanes, straightening vanes, splitters, inspection doors probe, inlets with test openings enclosures complete with locking caps, chain, gaskets, insulating plugs, and extension for insulated ductwork etc. Supply and erection of Thermal Insulation - Material shall be FM approved, open cell Nitrile Rubber foam, temperature range from -10ºC to +60ºC, Class O fire category and as per specification. The thickness of the insulation material shall be 13/19 mm. | 1 | LS | |
| 19 | 1.18 | ELECTRICAL WIRING : Wiring will be of 6 sqmm, 4 sqmm, 2.5 sqmm, 4 core, XLPE insulated, extruded PVC inner sheathed FRLS outer sheathed PVC armored cabling, wires and the make will be poly cab / orbit / Havells. The cabling will be done with lugs crippling and terminations identifying labels, duly clamped. | 1 | LS | |
| 20 | 1.19 | MEDICAL GAS PIPE LINES : Supply of copper pipes ½” for supply of carbon di oxide, vaccum oxygen, nitrogen into operation theatre. The distance will be approx. 22 meters within the operation theater with holders & connectors. | 1 | LS | |
| 21 | 1.2 | Testing & Validation : DQ, IQ, OQ & PQ \nAir velocity test \nAir changes test\nAir qty. check test & Temp.\nRH test\nDOP test for Hepa filter & Particle count test\nAir flow pattern test & Recovery test\n\n{Two Times in a year-Free of cost} | 1 | JOB | |
| 22 | 2 | ALUMINUM WORK | |||
| 23 | 2.01 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For Fixed Portion, Powder coated aluminum (minimum thickness of powder coating 50 micron) including rubber beadings in doors, windows and fixed portions. | 40 | KG | |
| 24 | 2.02 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminum (minimum thickness of powder coating 50 micron) | 15 | KG | |
| 25 | 2.03 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. | 11.25 | SQM | |
| 26 | 2.04 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete. | 2 | EACH | |
| 27 | 2.05 | Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 202x42x18 mm weighing not less than 78 gms | 2 | EACH | |
| 28 | 2.06 | Providing and fixing aluminum tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Polyester powder coated minimum thickness 50 micron aluminum tubular handle bar | 4 | EACH | |
| 29 | 3 | Supplying and fixing of Three Seater Waiting Area Visitor Chairs · Non-Magnetic SS perforated sheet seat and back shell made of high quality steel makes it strong and durable. · 1608mm (L)X 695 (H) X 555 (D). Legs and Armrests are made of cold rolled steel and are chrome plated for long life. Armrest and legs are anti rust and anti scratch | 3 | NO. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
