Renovation Of Smitha College Road In Ward 6
Tender Value
5.74 Lakhs
Estimated cost
Bid Submission
02 Aug 2019
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanjiramkulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Smitha College Road In Ward 6
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | retarring | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 5.5.B.2a : Modified Penetration Macadam 75 mm thick using Bitumen S-65\t<br>\t\t\nConstruction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.\t<br>\t\t\t\t\t\t\t\n(B)\t75 mm thick\t\t:-\t\t\t\t\t\n(II)\tBitumen (S-65) | BI01010001010000000000000515BI0100001114 | 143.371 | sqm |
| 3 | 1.002 | 5.2.1a : Tack Coat<br>\nProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | BI01010001010000000000000515BI0100001115 | 930 | sqm |
| 4 | 1.003 | 75.5.9.2.2.Pa : Plastic Roads - Bitumen S-65 <br>\n20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder\t<br>\nProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 (with 7% of bitumen replaced by shredded waste plastic)\t<br>\nCase - I By Manual Means\t<br>\n(II)\tBitumen (S-65) (VG - 30) | BI01010001010000000000000515BI0100001116 | 930 | sqm |
| 5 | 1.004 | 5.12.A.3.2a : Seal Coat - Manual Means - Type C - Bitumen S-65\t\t<br>\t\t\t\t\t\t\nProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510\t\t<br>\t\t\t\t\t\t\nA.\tBy Manual Means\t:-\t\t\t\t\t\t\nCase - III : Type C\t<br>\t\t\t\t\t\t\t\n(II)\tBitumen (S-65) | BI01010001010000000000000515BI0100001117 | 930 | sqm |
| 6 | 2 | Berm concreting | BI01010001010000000000000515BI0100001118 | ||
| 7 | 2.001 | 3.5.1 : Excavation in Cutting in Soil by manual means with lead upto 50 mExcavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 | BI01010001010000000000000515BI0100001119 | 31.95 | cum |
| 8 | 2.002 | od38308/2019_2020 : Construction of plain cement concrete pavement,thickness as per design, over a prepared subgrade/subbase,with 43grade. ceme fixed side form work9nt or any other type as per clause1501.2.2 M20 [grade],coarse and fine aggregate and fine aggregates conforming to IS383,maximum size of coars aggregate not exceeding 25mm,mixed ina concrete mixer of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side form work(steel channel,wedges,steel plates including levelling the form work as per drawing),spreading the concrete the showels,rakes,compacted using needle vibrators and finished in continous operation including provision of contraction and expansion,construction joints curing of concrete slabs for 14 dayswith water finishing to lines and grade as per drawing and techanical specification clause 1501. | BI01010001010000000000000515BI0100001120 | 31.95 | cum |
AI Tender Summary
Tender Timeline
Jul 23, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 02, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 07, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender