Construction Of Two Nos Entrance Gate At Bishnupur Industrial Growth Centre , Under Wbiidc , Dwarika , Bishnupur , Bankura . 722122
Tender Value
38.22 Lakhs
Estimated cost
Bid Submission
09 Aug 2019
0 days left
EMD
76442
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dwarika, Bishnupur, Bankura. → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Two Nos Entrance Gate At Bishnupur Industrial Growth Centre , Under Wbiidc , Dwarika , Bishnupur , Bankura . 722122
BOQ
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
|---|---|---|---|---|---|
| 1 | 1 | Earth work in excavation of foundation trenches or drains or septic tank , soak wells etc. in all sorts of soil (Including mixed soil but excluding laterite and sand stone), including removing spreading or stacking the spoils within a lead of 75 metre as directed and including trimmng the sides of trenches, levelling, dressing and ramming the bottom, bailing or pumping out water etc. as required complete.a) Depth of excavation not exceeding 1500 mm. | BI01010001010000000000000515BI0100001112 | 194 | Cum |
| 2 | 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 15 cm. Including watering and ramming etc.layer by layer, complete.a) With earth obtained from excavation of foundation. | BI01010001010000000000000515BI0100001113 | 194 | Cum |
| 3 | 3 | Filling in foundation or plinth fine Sand in layers not exceeding 150 mm as directed, and consolidating same by through saturation with water and ramming complete, including the cost of supply of sand. | BI01010001010000000000000515BI0100001114 | 10 | Cum |
| 4 | 4 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand. | BI01010001010000000000000515BI0100001115 | 180 | Sqm |
| 5 | 5 | Cement concrete with graded stone ballast (40 mm size excluding shuttering)(A) Pakur Variety a) 6:3:1 proportion. | BI01010001010000000000000515BI0100001116 | 18 | Cum |
| 6 | 6 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes (i) Pakur variety a) For foundation and upto Ground Floor roof level | BI01010001010000000000000515BI0100001117 | 98 | Cum |
| 7 | 7 | Hire and labour charges for shttering with centering and necesary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting and fixing and striking out after completion of works.a). 25mm to 30mm shuttering without staging in foundation etc. | BI01010001010000000000000515BI0100001118 | 248 | Sqm |
| 8 | 7.1 | A) Steel shuttering or 9 to 12mm thick approved quality ply board shuttering in any concrete work.a) For Ground Floor | BI01010001010000000000000515BI0100001119 | 485 | Sqm |
| 9 | 8 | M.S. / Tor steel reinforcement (For reinforcement concrete work) including distribution bars, stirrups binders etc. including supply of rods, initial straightening and removal of loose rust (in necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 1.626mm black annealed wire at every inter section complete as per drawing and direction including cost of wire. For M.S. Bar / Tor Steel (Other than Sail/Tata/Rinl) a) Upto Ground Floor. | BI01010001010000000000000515BI0100001120 | 15.5 | M.T. |
| 10 | 9 | Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth | BI01010001010000000000000515BI0100001121 | 4.75 | Cum |
| 11 | 9.1 | (b) Superstructure,i) In Ground Floor | BI01010001010000000000000515BI0100001122 | 45 | Cum |
| 12 | 10 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar a) 20 mm thick plaster. | BI01010001010000000000000515BI0100001123 | 816 | Sqm |
| 13 | 10.1 | (ii) With 1:4 cement mortar a) 10 mm thick plaster.i) For Ground Floor | BI01010001010000000000000515BI0100001124 | 230 | Sqm |
| 14 | 11 | Supplying, fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868- 1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white 3-Track Aluminium Sliding Windows | BI01010001010000000000000515BI0100001125 | 47 | Kg |
| 15 | 12 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. | BI01010001010000000000000515BI0100001126 | 180 | Kg |
| 16 | 13 | Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, dado in 15 mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete. [Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m] | BI01010001010000000000000515BI0100001127 | 17.5 | Sqm |
| 17 | 14 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B) Wall i) With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative , For Ground Floor | BI01010001010000000000000515BI0100001128 | 42 | Sqm |
| 18 | 15 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected upto three decimals).(a) Sal : Siliguri. | BI01010001010000000000000515BI0100001129 | 0.196 | Cum |
| 19 | 16 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length | BI01010001010000000000000515BI0100001130 | 24 | Each |
| 20 | 17 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made)(i) 35mm thick shutters with 19mm thick panel of size 30 to 45 Cm.a) Ordinary Teak Wood.\n\n | BI01010001010000000000000515BI0100001131 | 7.1 | Sqm |
| 21 | 18 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(i) 100mm. X 50mm. X 1.25mm | BI01010001010000000000000515BI0100001132 | 16 | Each |
| 22 | 19 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws (i) 225mm long x 10mm dia. bolt. | BI01010001010000000000000515BI0100001133 | 4 | Each |
| 23 | 20 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S.Specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base (Hexagonal/ Round rod)(i) 150 mm grip x 12 mm dia rod. | BI01010001010000000000000515BI0100001134 | 8 | Each |
| 24 | 21 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.i) 250mm long. | BI01010001010000000000000515BI0100001135 | 4 | Each |
| 25 | 22 | Supplying buble freeflot glass of approved make and brand conforming to IS: 2835-1987. 4mm thick coloured / tinted / smoke glass | BI01010001010000000000000515BI0100001136 | 7.5 | Sqm |
| 26 | 23 | M.S. gate as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. | BI01010001010000000000000515BI0100001137 | 1825 | Kg |
| 27 | 24 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) | BI01010001010000000000000515BI0100001138 | 1046 | Sqm |
| 28 | 25 | Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Thermoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer i) In Ground Floor | BI01010001010000000000000515BI0100001139 | 996 | Sqm |
| 29 | 26 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. | BI01010001010000000000000515BI0100001140 | 996 | Sqm |
| 30 | 27 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001141 | 62.33 | Sqm |
| 31 | 28 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001142 | 22 | Sqm |
| 32 | 29 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary a) On timber or plastered surface. With super gloss (hi gloss)i) Two coats (with any shade except white) | BI01010001010000000000000515BI0100001143 | 22 | Sqm |
| 33 | 29.1 | a) On steel or other metal surface .With super gloss (Hi-Gloss) i) Two coats (With any shade except white) | BI01010001010000000000000515BI0100001144 | 62.33 | Sqm |
| 34 | 30 | Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size ) excluding shuttering and reinforcement if any in ground floor as per relevent IS coads i) Pakur veriety | BI01010001010000000000000515BI0100001145 | 28 | Sqm |
| 35 | 31 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-incharge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]a) Area of each Granite slab 0.6 to 1.0 Sqm | BI01010001010000000000000515BI0100001146 | 106 | Sqm |
AI Tender Summary
Tender Timeline
Jul 22, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedAug 09, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 16, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender