Coal and Mines Boards / Undertakings / PSU Closing in 0 days TDR #21122013

Re-Organization And Commissioning Of Bus- Bay Pipe System And Making Of Oil Soak Tank At 11Kv/3 . 3Kv Main Sub-Station Of Topa Project Under Kuju Area

Issued by Boards / Undertakings / PSU · Kuju, Jharkhand
Tender Value
20.28 Lakhs
Estimated cost
Bid Submission
08 Aug 2019
0 days left
EMD
25400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Kuju → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Re-Organization And Commissioning Of Bus- Bay Pipe System And Making Of Oil Soak Tank At 11Kv / 3 . 3Kv Main Sub-Station Of Topa Project Under Kuju Area

BOQ

Sl.No. Item Description Item Code / Make Quantity Units
1 1 PART-A 11KV O/H line Re-organization
2 2 Erection of pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.Above 10.00 metre and upto 12.00 metre 9 Nos.
3 3 Supplying and erection of bow stay set complete (galvanised)with 19/20 mm dia X 1.8 metres long stay rod, anchor plate ofsize 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 40 mm nominal size ) foundationincluding excavation and refilling and also with 0.6 m long braceof size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulleyfixed at one end of the brace as required. 4 set
4 4 Supplying and erection of 11 KV pin insulator complete with largesteel head G.I. pin, nuts, washers etc. as required. 6 Nos
5 5 Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket typeand complete with galvanised strain clamps, bolts, nuts, washers etc. as required. 12 Nos.
6 6 Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter andabove including binding etc. as required. 164 kg
7 7 Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required. 1 Nos
8 8 Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for two 11 KV over head line conductorscomplete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flatiron clamps, bolts and nuts including drilling holes for insulatorpins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. 1 Nos
9 9 Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel iron and with bolts and nuts on the otherside for tying the cross arms together, including drilling holes forinsulator pins/ fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required. 6 set
10 10 Supplying and erection of a set of cross bracing FRLSame workfor 11 KV over head line double pole structure having four membersfabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height ,complete with 50 mm X 6mm M.S. flat iron clamps, bolts andnuts including drilling holes for insulator pins, bolts and nuts etc(as per drawing) and painting with primer and finish paint as required. 3 set
11 11 Dismantling of pole/ street light standard/ strut embedded incement concrete foundation etc. as required. 6 Nos
12 12 Dismantling of over head lines comprising of copper/ aluminiumover head conductor, G.I. wire, cross arms, insulators etc. as required. 164 kg
13 13 Cots of DO Fuse 1 Nos.
14 14 Cost of GOAB 11KV grade 630Amp horizental type 1 Nos
15 15 Installation of GOAB 11KV Grade 3 Nos
16 16 Installation of DO Fuse 2 Nos.
17 17 Erection of disc/ pin insulator for 11 KV over head lines as required 21 Nos
18 18 Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required 6 set
19 19 Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required. 3 set
20 20 PART-B 11KV/3.3 KV Grade Bus-bar with bus pipe
21 21 Fabrication and erection work of iron and steel platform, column, bracing housting. Placing etc. 3 MT
22 22 Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 4 cum
23 23 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre belowground as strip earth electrode, including connection/ terminatingwith G.I. nut, bolt, spring, washer etc. as required. (Jointing shallbe done by overlapping and with 2 sets of G.I. nut bolt & springwasher spaced at 50mm) 80 mtr
24 24 Cost of Alloy aluminum pipe 48 mm dia 170 mtr
25 25 Cost of palm connector 11KV grade 24 nos
26 26 Cost of pipe to pipe connector 11KV grade 9 Nos.
27 27 Cost of Support Insulator 11KV grade 9 Nos
28 28 Cost of Post Insulator 22KVN 12 Nos.
29 29 Cost of Bi-metalic 38 Nos.
30 30 Cost of T- Connector to Wolf 12 Nos.
31 31 Cost of T- Connector 12 nos
32 32 Cost of Alluminium paint 30 ltr
33 33 Cost of Red oxide paint 30 ltr
34 34 Cost of GOAB 11KV grade horizental type 630Amp 4 Nos.
35 35 Installation of GOAB 11KV Grade 5 Nos.
36 36 Dismentanling of VCB/OCB and transformer and re-installation and commissioning of same 5 Nos.
37 37 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m inwidth as well as 10 sqm on plan) including disposal of excavatedearth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelledand neatly dressed.2.7.1 Ordinary rock 20 cum
38 38 Brick work with common burnt clay modular bricks of class designation7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 16.85 cum
39 39 Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete 38.84 cum
40 40 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick 81.84 sqm
41 41 Erection cost for sl no 24-33 1 Nos.
42 42 PART-C Oil Soak Tank
43 43 Earth work in excavation by mechanical means (Hydraulic excavator/ manual means over areas (exceeding 30 cm in depth, 1.5 m inwidth as well as 10 sqm on plan) including disposal of excavatedearth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelledand neatly dressed.\n2.7.1 Ordinary rock 15 cum
44 44 Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 2.83 Nos.
45 45 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.80 mm dia nominal bore 42 Nos.
46 46 Reinforced cement concrete work in walls (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate20 mm nominal size) 0.9 cum
47 47 Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete above plinth level.Mild steel and Medium Tensile steel bars 50 kg
48 48 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 1.2 cum
49 49 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick 17.88 sqm
50 50 Centering and shuttering including strutting, propping etc. and emoval ofform work for :Retaining walls, return walls, walls (any thickness) includingattached pilasters, buttresses, plinth and string courses fillets,kerbs and steps etc. 2.75 sqm
51 51 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer-incharge. 20 cum
52 52 Cost of Flange 80 mm 12 Nos.
53 53 Cost of Valve 80mm 3 nos
54 57 Total impact of GST for the purpose of CTC 1 Nos

AI Tender Summary

OUR REF NO 21122013
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 20.28 Lakhs
LAST DATE 08-08-2019
Authority
Authority Name Central Coalfields Limited
Work Description Re-Organization And Commissioning Of Bus- Bay Pipe System And Making Of Oil Soak Tank At 11Kv / 3 . 3Kv Main Sub-Station Of Topa Project Under Kuju Area
Basic Detail
Tender No GM(K)/EnM/eTender/19-20/243
Bidding Type Tender
Location
City Kuju
State Jharkhand
Key Dates
Publish Date 23 Jul 2019
Submission Date 08 Aug 2019
Open Date 09 Aug 2019
Finance
Tender Value 20.28 Lakhs
Tender Fee Ref. Documents
EMD 25400
Exemption Not Available
Document List
54BBA410-47E7-467E-AA15-F3FCEBA3E69F.html
Tendernotice_1.pdf
BOQ_149653.xls
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 23, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 08, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 09, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

54BBA410-47E7-467E-AA15-F3FCEBA3E69F.html

pdf

Tendernotice_1.pdf

xls

BOQ_149653.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders