| 1 | 1 | 2.6.1A Earth work in excavation over areas (exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m ; disposed earth to be levelled and neatly dresses - all kinds of soil. | BI01010001010000000000000515BI0100001113 | 26 | Cum |
| 2 | 2 | 2.27 Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete. | | 10 | Cum |
| 3 | 3 | 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size). | | 7.1 | Cum |
| 4 | 4 | 4.3.1 Centering shuttering including struttings, propping etc. and removal of form work for foundations, footings, bases for columns. | | 4.1 | Sqm |
| 5 | 5 | 5.9.3 Centring and shuttering including strutting, propping etc. and removal of Using steel sheet with M.S.frames. | | 11 | Sqm |
| 6 | 6 | 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement:2coarse sand : 4 graded stone aggregate 20mm nominal size). | | 12 | Cum |
| 7 | 7 | 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement -All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). | | 10 | Cum |
| 8 | 8 | 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer all complete. | | 1150 | Kgs. |
| 9 | 9 | 13.1.1 12mm cement plaster of mix: Cement mortar 1:4 (1 cement : 4 fine sand). | | 81 | Sqm |
| 10 | 10 | 5.22.7 Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete Thermo - Mechanically treated bars (ISI BRAND OF APPROVED MAKE) including placing the M30 grade Athees make cover block @ 60cm centre to centre. | | 400 | Kgs. |
| 11 | 11 | 12.70 Providing and fixing colour coated galvalume sheet of 550 M.P.A yield of AZ 150 strength formed as per patterned steel rib profile with the depth of 31mm pitch of 250mm and overall width of 1060mm and thickness 0.5mm with required J or C hook bolts and nets 8mm dia G.S paint and working etc., complete excluding the cost of purlin , rafter and truss etc. | | 80 | Sqm |
| 12 | 12 | 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work. | | 63 | Sqm |
| 13 | 13 | Supplying of 3 phase, 415 volts, 50 cycles, 0.8 power factor for electric starting diesel generator comprising the following units:- Kirloskar/ Leyland/ Ruston /Greaves Cotton/Cummins make) water cooled and shall be of multi stroke, multi cylinders, cold starting, developing not less than198BHP under normal temperature and pressure. The engine shall conform to I.S.10002 with latest amendments. It shall be capable of taking 10% over load for one hour in every 12 hours of continous operation including 6 Nos. of anti vibration pads.The engine shall be complete with the following accessories:Electrical starting provision, engine cooling fan, fuel and lubricating oil filters, oil bath, air filter, lub oil pressure gauge 350 litres capacity fuel tank mounted with engine, hour meter with exhaust manifold, flexible pipe, 12 /24 volts electric starting equipment complete with starter, alternator and twonumbers of 12 volts with 25 plates battery of make AMCO/ STANDARD/ EXIDE/DAGANITE (with Guarantee cards) of adequate capacity and low lubricating oil pressure/high temperature varying engine shut down devices. The Acoustic enclosure shall have the following: Acoustic enclosure shall be powder coated and fabricated out of 16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type construction ... | | 1 | No. |
| 14 | 14 | 31.285.1C Charges for transporting, erection, testing and commissioning of generator set excluding foundation, but including mechanical and other unskilled wages for installation of equipment, wiring from generator set to panel board and change over switches, handling charges, purchase of spares if any required for the installation and commissioning, the cost of fuel and other materials for a trial run of 6 hours. This rate also includes for testing and commissioning of generator set as specified, obtaining approval of Central Electricity Authority (CEA) payment for CEA inspection/Licence fees or any other charges and fulfilling other requirements and conditions laid down by CEA-from 125 KVA to 200 KVA. | | 1 | Job |
| 15 | 15 | 31.281.1C Providing and fixing of suitable M.S.exhaust pipe including 2 Nos. of M.S. bends (long), 7 Nos. of M.S. flanges, M.S. pipe Class B - 5 Rm as flexible exhaust pipe. The rate is inclusive of transportation charges for shifting of welding machine and gas cutting set to site, consumption of welding rod 10 SWG and cutting gas, providing fasterners of 10mm bolts / nuts / washers and flange gaskets including labour charges etc. as per IE standard.100 mm dia exhaust pipe ( from 125KVA to 160KVA). | | 1 | Job |
| 16 | 16 | 31.283.1 Providing and fixing of fire safety equipments comprising 1 No. of 4.5 kg of CO2 fire extinquisher 1m x 2m x6mm thick rubber mat shock proof of superior quality with two numbers of 10 litres capacity fire buckets (red colour) with M.S. stand arrangements etc. | | 1 | Set |
| 17 | 17 | Basic Code.No. 3219 Supply and fixing of 3 1/2 x 300sqmm armoured aluminium U.G cable - 1.1KV grade. Make: Finolex/ Polycab etc. complete as directed by the Engineer-in-charge. | | 35 | Mts. |
| 18 | 18 | 31.284.1C Providing and fixing of 4 pole change over switch of STANDARD/HAVELLS/KUNDAN/ GEM make including M.S. frame as per I.E.standard.-400 Amps. | | 1 | No. |
| 19 | 19 | Basic Code.No.2214 Supply and fixing of Aluminium lugs for 300 sq.mm cable etc. complete as directed by the Engineer-in-charge. | | 16 | Each |
| 20 | 20 | 3.1 Earthing with G.I.medium pipe 3.0 mt long and 40mm dia including accessories 250 x 50 x 6 mm G.I clamp with 12mm bolt, nut and washer for connecting earth wire, RCC ring enclosure and cover plate complete as required:- | | 2 | Sets |
