Public Administrative Department Government Departments Closing in 0 days TDR #20878522

Electrical Industry, Battery and Cell, Dry Cell Batteries, Power Conditioning, Chokes, Switches and Relay, Push Button Switches, Switch Supply, Exterior Lighting and accessories, Street Lighting, Light and Bulbs, Starter, Tube Light, Machinery and Tools,

Issued by Government Departments · CTTC, Bhubaneswar, Odisha
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Jul 2019
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
CTTC, Bhubaneswar → Odisha
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Supply Of Equipment And Spares For Establishment Of Solar Lab.=> Open Tender:-4.16 Desoldering gun 4.17 Blow lamp 0.5 Ltr. 4.18 SMF Battery 12V, 7Ah 4.19 Florescent tube light with stand - 40watt 4.20 Florescent tube light choke (electronics, Manual) & Starter 40watt, 230-250 Volt (Each 2 Nos) 4.21 Lamp (AC) 10w, 15w, 100w (Each 5 Nos) 4.22 Lamp (DC) 10w, 12volt 4.23 Solar street light Charge Controller - 12volt, 10Amp. 4.24 One way switch - 230volt, 6amp 4.25 Two way switch - 230volt, 6amp 4.26 Lamp Holder - 230volt, 6amp 4.27 Push Button switch (NO) - 230volt, 10amp 4.28 Push Button switch (NC) - 230volt, 10amp 4.29 Double ended spanner 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22 (Each 1 No.) 4.30 Double ended ring spanner 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22 (Each 1 No.) 4.31 Combination Plier 15cm 4.32 Side cutting Plier 15cm 4.33 Nose Plier 15cm 4.34 Electrician Knife 15cm 4.35 Wire Stripper 13cm 4.36 Neon tester 500 Volt 4.37 Allen Keys 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm 4.38 Hacksaw frame with blade 15cm 4.39 Hand crimping plier (wire lug): 0.5-16mm dia 4.40 Taparia Screw driver set Five Blades including poker,Elect.With Neon Bulb,500v 4.41 Screw driver (+/-) 15cm, 30cm (2 Nos Each) 4.42 Measuring Tape 3mtr 4.43 Centre punch 10cm 4.44 Standard wire gauge7/0 - 0.500inches, 12.700mm 4.45 Vernier Caliper 0.2 LC 4.46 Chisel 10cm 4.47 Hand Drill Machine 300watt, 230v 4.48 Plumb bob 200gm 4.49 Sprit level 30cm 4.50 Flat file (Second cut) 15cm 4.51 Round file (Second cut) 15cm 4.52 Triangular file (Second cut) 15cm 4.53 PVC mallet 20mm dia 4.54 Ball peen hammer 250gm 4.55 Safety shoe 4.56 Nose mask 4.57 Safety Goggles 4.58 Ear plug 4.59 PVC hand gloves 4.60 Cotton hand gloves 4.61 Chemical resistant rubber gloves 4.62 Reflective jacket 5.00 Other Training Instrument 5.01 Solar lanten 3 Watt

AI Tender Summary

OUR REF NO 20878522
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 24-07-2019
Authority
Authority Name Ministry Of Micro Small And Meduim Enterprises
Work Description Tender For Supply Of Equipment And Spares For Establishment Of Solar Lab.=> Open Tender:-4.16 Desoldering gun 4.17 Blow lamp 0.5 Ltr. 4.18 SMF Battery 12V, 7Ah 4.19 Florescent tube light with stand - 40watt 4.20 Florescent tube light choke (electronics, Manual) & Starter 40watt, 230-250 Volt (Each 2 Nos) 4.21 Lamp (AC) 10w, 15w, 100w (Each 5 Nos) 4.22 Lamp (DC) 10w, 12volt 4.23 Solar street light Charge Controller - 12volt, 10Amp. 4.24 One way switch - 230volt, 6amp 4.25 Two way switch - 230volt, 6amp 4.26 Lamp Holder - 230volt, 6amp 4.27 Push Button switch (NO) - 230volt, 10amp 4.28 Push Button switch (NC) - 230volt, 10amp 4.29 Double ended spanner 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22 (Each 1 No.) 4.30 Double ended ring spanner 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22 (Each 1 No.) 4.31 Combination Plier 15cm 4.32 Side cutting Plier 15cm 4.33 Nose Plier 15cm 4.34 Electrician Knife 15cm 4.35 Wire Stripper 13cm 4.36 Neon tester 500 Volt 4.37 Allen Keys 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm 4.38 Hacksaw frame with blade 15cm 4.39 Hand crimping plier (wire lug): 0.5-16mm dia 4.40 Taparia Screw driver set Five Blades including poker,Elect.With Neon Bulb,500v 4.41 Screw driver (+/-) 15cm, 30cm (2 Nos Each) 4.42 Measuring Tape 3mtr 4.43 Centre punch 10cm 4.44 Standard wire gauge7/0 - 0.500inches, 12.700mm 4.45 Vernier Caliper 0.2 LC 4.46 Chisel 10cm 4.47 Hand Drill Machine 300watt, 230v 4.48 Plumb bob 200gm 4.49 Sprit level 30cm 4.50 Flat file (Second cut) 15cm 4.51 Round file (Second cut) 15cm 4.52 Triangular file (Second cut) 15cm 4.53 PVC mallet 20mm dia 4.54 Ball peen hammer 250gm 4.55 Safety shoe 4.56 Nose mask 4.57 Safety Goggles 4.58 Ear plug 4.59 PVC hand gloves 4.60 Cotton hand gloves 4.61 Chemical resistant rubber gloves 4.62 Reflective jacket 5.00 Other Training Instrument 5.01 Solar lanten 3 Watt
Basic Detail
Tender No 2019_DC_483273_1
Bidding Type Tender
Location
City CTTC, Bhubaneswar
State Odisha
Key Dates
Publish Date 03 Jul 2019
Submission Date 24 Jul 2019
Open Date 26 Jul 2019
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 30000
Exemption Not Available
Document List
Tendernotice_1.pdf
work_505975.zip
1c42a1d1-4361-47b2-b5dd-c06e840a1c22.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 03, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 24, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 26, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

zip

work_505975.zip

pdf

1c42a1d1-4361-47b2-b5dd-c06e840a1c22.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders