Closing in 0 days TDR #2061732

Issued by · VELLORE, Tamil Nadu
Tender Value
1.10 Lakhs
Estimated cost
Bid Submission
21 Sep 2010
0 days left
EMD
1100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
VELLORE → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Providing Drilling Borewell and erection of Mini power pump and syntex tank (Geophysical Investigation charges for Selecting the point, Drilling of Borewells 150mm dia in Sedimentary formations using hand bore set including in section of casing pipes and removal of casing pipes etc., including supplying and packing of pebbles and conveyance of hand boreset including loading and unloading etc., Supply and delivery of 180mm dia 6Ksc Pvc pipe including cost and conveyance etc,Labour charge for inserting 180mm dia PVC casing pipe, Earthwork excavation and depositing on bank with initial lead of 10m and lift of 2.00m in Hard stiff clay, stiff Black cotton soil, Hard red earth, Shales, Murrams and earth mixed with small size boulders etc., as per standard specifications 20B., Cement concrete 1:5:10 mix (one cement five sand ten hard broken jelly) Using 40 mm size I.S.S. HBG metal for foundation concrete etc., Brick work in Cement Mortar 1:5 mix (One Cement, five Sand)using Country bricks of size (8 ¾ x 4 ¼ x 2 ¾ ) including cost and conveyance of all materials from approved Quarry to work site and labour Charges etc., Supplying and filling basement with clean dry river sand including cost and conveyance of sand and all other labour charges for filling watering and construction etc., Providing form work for centering and shuttering for all Plain and reinforced concrete works including strutting and removing the same after the specified period etc.,Supplying, fabricating and placing in position mild steel or deformed steel bars for all Reinforced Cement Concrete items of work including cost of steel, transporting, straightening, cutting, bending, cranking, binding etc., including cost of binding wire etc., complete, Rein forced Cement concrete 1:2:4 mix (one cement and two sand and four hard broken jelly) using 20mm ISS HBG metal from approved quarry to work site including cost & conveyance of all materials and labour charges for mixing the concrete, laying, curing excluding cost of renforcement etc., complete, Special ceiling Plastering in cement mortar 1:3mix (one Cement and three sand) 10 mm thick etc.,Plastering in cement mortar 1:5 mix (one Cement and five sand) 12 mm thick etc, Plastering in cement mortar 1:3 mix (one Cement and three sand) 20 mm thick etc,Floor finishing with Ellispattern type in 1:3 (one cement and three aggregates) using 6mm to 10mm size ISS including cost and conveyance of all materials, Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mm x 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25mm x 3 mm including cuting, welding, grinding, locking arrangements and labour charges etc., complete, Supply delivery and fixing of HDPE sintex tank capacity of 1000 litres including cost and conveyance of water tank at site and labour charges for and fixing inposition etc., complete, Supply delivery laying and jointing of 25mm dia GI pipe of including cost and conveyance of all materials, Supply and delivery of 1HP Submersible motor pumpset in single phase as per IS 8034 without panel board for 20 LPm x 100m Head including all material charges and labour charges etc., Supply delivery laying and jointing of 20mm dia GI pipe of including cost and conveyance of all materials, Supply delivery laying and jointing of 15mm dia GI pipe of including cost and conveyance of all materials at site and all labour charges etc., Supply delivery and fixing of GI Specials including cost of all materials, 25mm GI Tee, 25mm GI union, 25mm dia Elbow, 25x20mm GI reducer, 20mm GI Elbow, 20mm GI Cubling, 20mm steel tap, 20mm GI Tee, 25mm GI Ball valve, 25mm GI Nipple, 15mm GI elbow, 15mm GI unian, 20mm Black hose pip, 32mm MS clamp set, Bore plate, Wiring with 2x2.5 sqmm PVC unstured single core aluminum cable for light point as per standard specifications etc., complete, Supplying and fixing of Main switch with T.W. Board with earth connection etc, Supplying and fixing of 15Amps fuse connection including cost and conveyance etc., complete, Pan off 2x6sqmm PVC sheethed SC aluminum cable service connection etc., complete, Supply and fixing of 20mm GI pipe with bend 3.00m in length for E.B. service connection post including cost and conveyance of and materials and labour charges etc., complete., Supplying and fixing of Balk head fitting with gentred with 60 watts bulb including cost of all materials etc., complete, Supply and fixing of ON and OFF starter with two box including all labour charges etc., complete,

Tender Timeline

Sep 09, 2010
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 21, 2010
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 21, 2010

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders