Design, Engineering, Supply, Erection, Testing and Commissioning of TERMINAL AUTOMATION SYSTEM(Load Rack Computers (LRC Server) working on redundant hot standby mode with automation software, Terminal Data Manager (TDM) computer,. Tank Truck Entry system (TTES),Operator Interface Consoles (OIC) / Operator Work Station (OWS). ( 2 NO. in Control room AND 1 NO. in TM room),Data Concentrators,OPC Gateway server along with software and storage media,Filing /Document cabinets,Printer table, Printers for control/planning & weigh bridge rooms. For alarm, report & graphics printing. Dot Matrix -24 pin, 300 cps, 136 column,Laser colour ? A3 size ,Printer Servers,Ex-proof Remote Interaction Terminals,Proximity type card readers, scratch proof/ waterproof with HPCL logo/ highly durable quality and long life,Proximity cards for card readers ,Mass Flow Meter (MFM) in 3 line for T/T Loading with 300 # flange connection: Mass flow meters with remote mounted transmitter (ex-proof with 3 O/Ps) for T/T loading & vapour eliminator. Note: Flow meters are for custody transfer application & complete metering system shall have W&M approval prior to commissioning trials. Accuracy shall be 0.05% of flow. Bidder shall size the meter based on required flow rate, accuracy & pressure drop across the meter mentioned in data sheets,Spare MF Meter (including testing) : With same accuracy measurement For T/T Loading Note: Flow meters are for custody transfer application & complete metering system shall have W&M approval prior to commissioning trials. Accuracy shall be 0.05% of flow,PD meter with air eliminator cum strainer for Diesel from WOT in 2? line with 150# flange process connection: PD meter with local indicator/totalizer (ex-proof ),Universal hand held HART Calibrator/Communicator with charger,Cabling For TAS and Subsystems Cabling shall include supply and providing complete cabling required for complete Automation of Terminal viz. power cables, control cables, signal cables, data communication cables and special cables if any, including suitable sizing for control/equipment, planning, weigh bridge, drivers amenity room, etc,For TAS and Subsystems Flameproof and IS Junction Boxes, Integration of ATFMS with TAS: Materials for interfacing signals from Tank Farm Management System ( ATFMS supplied by others; available at Control Room),Integration of SCADA Systems with TAS Supply of all material for interfacing signals from SCADA System to TAS system and its sub systems (Note: SCADA System supply is by others),Pressure Gauge 6 dial size ,Gauge Pressure Transmitter,Differential Pressure Transmitter,Float and Tape type Level Gauge with transmitter for Potable and Make-up Water Storage Tanks,TANK GAUGING EMBEDED IN TAS Any other intermediate accessory to complete the hook up and integration with gauging instruments such as radar, servo gauging instruments, multi point averaging type temperature sensors, pressure transmitters and level switches with TAS,Electric Siren (ES),Hand Operated Siren (HOS),FAS Hardware /software for interfacing with TAS, ESD PLC etc. , including cables, accessories etc,Mimic Panel,Supply of all the material for ? cabling, wiring and termination at both the ends and connection of Local/Remote operation of fire water / fire fighting system and auto operation ,Addressable Smoke and Thermal Detector (STD), Addressable Control Module (CM),Earthing for field instruments SERVICE (ERECTION, TESTING AND COMMISIONING) OF TERMINAL AUTOMATION SYSTEM (TAS))
